- 22 12月, 2010 1 次提交
-
-
由 Ian Munsie 提交于
If we are running the new perf on an old kernel without support for sample_id_all, we should fall back to the old unordered processing of events. If we didn't than we would *always* process events without timestamps out of order, whether or not we hit a reordering race. In other words, instead of there being a chance of not attributing samples correctly, we would guarantee that samples would not be attributed. While processing all events without timestamps before events with timestamps may seem like an intuitive solution, it falls down as PERF_RECORD_EXIT events would also be processed before any samples. Even with a workaround for that case, samples before/after an exec would not be attributed correctly. This patch allows commands to indicate whether they need to fall back to unordered processing, so that commands that do not care about timestamps on every event will not be affected. If we do fallback, this will print out a warning if report -D was invoked. This patch adds the test in perf_session__new so that we only need to test once per session. Commands that do not use an event_ops (such as record and top) can simply pass NULL in it's place. Acked-by: NThomas Gleixner <tglx@linutronix.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <1291951882-sup-6069@au1.ibm.com> Signed-off-by: NIan Munsie <imunsie@au1.ibm.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 09 12月, 2010 10 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
Since we check at the beginning of the callers, no need to ask if dump_trace is set multiple times. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <new-submission> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Thomas Gleixner 提交于
Simplify further. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20101207124551.110956235@linutronix.de> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Thomas Gleixner 提交于
Simplify the code a bit. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20101207124551.014649793@linutronix.de> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Thomas Gleixner 提交于
Preparatory patch for ordered perf report -D Acked-by: NIan Munsie <imunsie@au1.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20101207124550.918655066@linutronix.de> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Thomas Gleixner 提交于
Preparatory patch for ordered output of perf report -D Acked-by: NIan Munsie <imunsie@au1.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20101207124550.818568607@linutronix.de> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Thomas Gleixner 提交于
Preparatory patch for ordered output of perf report -D. Acked-by: NIan Munsie <imunsie@au1.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20101207124550.725128545@linutronix.de> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Thomas Gleixner 提交于
The dump code used by perf report -D is scattered all over the place. Move it to separate functions. Acked-by: NIan Munsie <imunsie@au1.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20101207124550.625434869@linutronix.de> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Thomas Gleixner 提交于
If the event has no timestamp assigned then the parse code sets it to ~0ULL which causes the ordering code to enqueue it at the end. Process it right away. Reported-by: NIan Munsie <imunsie@au1.ibm.com> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20101207124550.528788441@linutronix.de> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Thomas Gleixner 提交于
event__name[] is missing an entry for PERF_RECORD_FINISHED_ROUND, but we happily access the array from the dump code. Make event__name[] static and provide an accessor function, fix up all callers and add the missing string. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20101207124550.432593943@linutronix.de> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 David Ahern 提交于
This is useful for analyzing a perf data file on a different system than the one data was collected on and still include symbols from loaded kernel modules in the output. Commiter note: Updated the man page accordingly. LKML-Reference: <1291775986-16475-1-git-send-email-daahern@cisco.com> Signed-off-by: NDavid Ahern <daahern@cisco.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 07 12月, 2010 2 次提交
-
-
由 Ian Munsie 提交于
When we build perf we place all of the .o files from the library files (util, arch/x/util, etc) into libperf.a which is then linked into perf. The problem is that the linker will by default only consider .o files within the .a archive if they are necessary to satisfy an unresolved symbol. As weak functions are not unresolved, it will not consider a .o file from the archive containing the strong versions of weak functions unless it requires it for another reason. This patch adds the --whole-archive flags to the linker when passing in the libperf.a file to ensure that it will consider every .o file in the archive, not just what it believes that it needs. The end result is that weak functions can now be overridden by strong variants of them in the libperf.a file. Cc: "tom.leiming" <tom.leiming@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1290991642-sup-5890@au1.ibm.com> Signed-off-by: NIan Munsie <imunsie@au1.ibm.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
When execvp fails to find the specified command on the path we won't get SIGCHLD, so send a SIGUSR1 and exit right away. Current situation would require a SIGINT performed by the user and would produce meaningless summary. Now: [acme@emilia linux]$ ./foo -bash: ./foo: No such file or directory [acme@emilia linux]$ perf record ./foo ./foo: No such file or directory [acme@emilia linux]$ Acked-by: NThomas Gleixner <tglx@linutronix.de> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Stephane Eranian <eranian@google.com> Cc: Tom Zanussi <tzanussi@gmail.com> Cc: Thomas Gleixner <tglx@linutronix.de> LKML-Reference: <new-submission> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 06 12月, 2010 2 次提交
-
-
由 Chris Samuel 提交于
There were a few stray calloc()'s and malloc()'s which were not having their return values checked for success. As the calling code either already coped with failure or didn't actually care we just return -ENOMEM at that point. Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NChris Samuel <chris@csamuel.org> LKML-Reference: <4CDDF95A.1050400@csamuel.org> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Stephane Eranian 提交于
Fix annoying compiler warning in the is_top_script() function. The issue was that a const char * was cast into a char * to call ends_with(). We fix the users of ends_with() instead. Some are passing a char *, but it is okay to cast the return value of ends_with() to char * (because we understand what ends_with() does). Cc: David S. Miller <davem@davemloft.net> Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Richter <robert.richter@amd.com> Cc: Stephane Eranian <eranian@gmail.com> LKML-Reference: <4cf92096.17edd80a.1540.5d60@mx.google.com> Signed-off-by: NStephane Eranian <eranian@google.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 07 12月, 2010 3 次提交
-
-
由 Thomas Gleixner 提交于
Now that we have timestamps on FORK, EXIT, COMM, MMAP events we can sort everything in time order. This fixes the following observed problem: mmap(file1) -> pagefault() -> munmap(file1) mmap(file2) -> pagefault() -> munmap(file2) Resulted in decoding both pagefaults in file2 because the file1 map was already replaced by the file2 map when the map address was identical. With all events sorted we decode both pagefaults correctly. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> LKML-Reference: <alpine.LFD.2.00.1012051220450.2653@localhost6.localdomain6> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Akihiro Nagai 提交于
Add new macro OPT_CALLBACK_DEFAULT_NOOPT for parse_options. It enables to pass the default value (opt->defval) to the callback function processing options require no argument. Reviewed-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> LKML-Reference: <20101203035853.7827.17502.stgit@localhost6.localdomain6> Signed-off-by: NAkihiro Nagai <akihiro.nagai.hw@hitachi.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Ian Munsie 提交于
In the event that a DSO has not been identified, just print out [unknown] instead of the instruction pointer as we previously were doing, which is pretty meaningless for a shared object (at least to the users perspective). The IP we print out is fairly meaningless in general anyway - it's just one (the first) of the many addresses that were lumped together as unidentified, and could span many shared objects and symbols. In reality if we see this [unknown] output then the report -D output is going to be more useful anyway as we can see all the different address that it represents. If we are printing the symbols we are still going to see this IP in that column anyway since they shouldn't resolve either. This patch also changes the symbol address printouts so that they print out 0x before the address, are left aligned, and changes the %L format string (which relies on a glibc bug) to %ll. Before: 74.11% :3259 4a6c [k] 4a6c After: 74.11% :3259 [unknown] [k] 0x4a6c Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Stephane Eranian <eranian@google.com> LKML-Reference: <1291603026-11785-2-git-send-email-imunsie@au1.ibm.com> Signed-off-by: NIan Munsie <imunsie@au1.ibm.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 05 12月, 2010 2 次提交
-
-
由 Arnaldo Carvalho de Melo 提交于
So that we can use -T == --timestamp, asking for PERF_SAMPLE_TIME: $ perf record -aT $ perf report -D | grep PERF_RECORD_ <SNIP> 3 5951915425 0x47530 [0x58]: PERF_RECORD_SAMPLE(IP, 1): 16811/16811: 0xffffffff8138c1a2 period: 215979 cpu:3 3 5952026879 0x47588 [0x90]: PERF_RECORD_SAMPLE(IP, 1): 16811/16811: 0xffffffff810cb480 period: 215979 cpu:3 3 5952059959 0x47618 [0x38]: PERF_RECORD_FORK(6853:6853):(16811:16811) 3 5952138878 0x47650 [0x78]: PERF_RECORD_SAMPLE(IP, 1): 16811/16811: 0xffffffff811bac35 period: 431478 cpu:3 3 5952375068 0x476c8 [0x30]: PERF_RECORD_COMM: find:6853 3 5952395923 0x476f8 [0x50]: PERF_RECORD_MMAP 6853/6853: [0x400000(0x25000) @ 0]: /usr/bin/find 3 5952413756 0x47748 [0xa0]: PERF_RECORD_SAMPLE(IP, 1): 6853/6853: 0xffffffff810d080f period: 859332 cpu:3 3 5952419837 0x477e8 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f44600000(0x21d000) @ 0]: /lib64/ld-2.5.so 3 5952437929 0x47840 [0x48]: PERF_RECORD_MMAP 6853/6853: [0x7fff7e1c9000(0x1000) @ 0x7fff7e1c9000]: [vdso] 3 5952570127 0x47888 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f46200000(0x218000) @ 0]: /lib64/libselinux.so.1 3 5952623637 0x478e0 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f44a00000(0x356000) @ 0]: /lib64/libc-2.5.so 3 5952675720 0x47938 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f44e00000(0x204000) @ 0]: /lib64/libdl-2.5.so 3 5952710080 0x47990 [0x58]: PERF_RECORD_MMAP 6853/6853: [0x3f45a00000(0x246000) @ 0]: /lib64/libsepol.so.1 3 5952847802 0x479e8 [0x58]: PERF_RECORD_SAMPLE(IP, 1): 6853/6853: 0xffffffff813897f0 period: 1142536 cpu:3 <SNIP> First column is the cpu and the second the timestamp. That way we can investigate problems in the event stream. If the new perf binary is run on an older kernel, it will disable this feature automatically. Tested-by: NThomas Gleixner <tglx@linutronix.de> Reviewed-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NIan Munsie <imunsie@au1.ibm.com> Acked-by: NThomas Gleixner <tglx@linutronix.de> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephane Eranian <eranian@google.com> LKML-Reference: <1291318772-30880-5-git-send-email-acme@infradead.org> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
At perf_session__process_event, so that we reduce the number of lines in eache tool sample processing routine that now receives a sample_data pointer already parsed. This will also be useful in the next patch, where we'll allow sample the identity fields in MMAP, FORK, EXIT, etc, when it will be possible to see (cpu, timestamp) just after before every event. Also validate callchains in perf_session__process_event, i.e. as early as possible, and keep a counter of the number of events discarded due to invalid callchains, warning the user about it if it happens. There is an assumption that was kept that all events have the same sample_type, that will be dealt with in the future, when this preexisting limitation will be removed. Tested-by: NThomas Gleixner <tglx@linutronix.de> Reviewed-by: NThomas Gleixner <tglx@linutronix.de> Acked-by: NIan Munsie <imunsie@au1.ibm.com> Acked-by: NThomas Gleixner <tglx@linutronix.de> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Ian Munsie <imunsie@au1.ibm.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephane Eranian <eranian@google.com> LKML-Reference: <1291318772-30880-4-git-send-email-acme@infradead.org> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 02 12月, 2010 16 次提交
-
-
由 Stephane Eranian 提交于
This patch adds an option (-x/--field-separator) to print counts using a CSV-style output. The user can pass a custom separator. This makes it very easy to import counts directly into your favorite spreadsheet without having to write scripts. Example: $ perf stat --field-separator=, -a -- sleep 1 4009.961740,task-clock-msecs 13,context-switches 2,CPU-migrations 189,page-faults 9596385684,cycles 3493659441,instructions 872897069,branches 41562,branch-misses 22424,cache-references 1289,cache-misses Works also in non-aggregated mode: $ perf stat -x , -a -A -- sleep 1 CPU0,1002.526168,task-clock-msecs CPU1,1002.528365,task-clock-msecs CPU2,1002.523360,task-clock-msecs CPU3,1002.519878,task-clock-msecs CPU0,1,context-switches CPU1,5,context-switches CPU2,5,context-switches CPU3,6,context-switches CPU0,0,CPU-migrations CPU1,1,CPU-migrations CPU2,0,CPU-migrations CPU3,1,CPU-migrations CPU0,2,page-faults CPU1,6,page-faults CPU2,9,page-faults CPU3,174,page-faults CPU0,2399439771,cycles CPU1,2380369063,cycles CPU2,2399142710,cycles CPU3,2373161192,cycles CPU0,872900618,instructions CPU1,873030960,instructions CPU2,872714525,instructions CPU3,874460580,instructions CPU0,221556839,branches CPU1,218134342,branches CPU2,218161730,branches CPU3,218284093,branches CPU0,18556,branch-misses CPU1,1449,branch-misses CPU2,3447,branch-misses CPU3,12714,branch-misses CPU0,8330,cache-references CPU1,313844,cache-references CPU2,47993728,cache-references CPU3,826481,cache-references CPU0,272,cache-misses CPU1,5360,cache-misses CPU2,1342193,cache-misses CPU3,13992,cache-misses This second version adds the ability to name a separator and uses field-separator as the long option to be consistent with perf report. Commiter note: Since we enabled --big-num by default in 201e0b06 and -x can't be used with it, we need to notice if the user explicitely enabled or disabled -B, add code to disable big_num if the user didn't explicitely set --big_num when -x is used. Cc: David S. Miller <davem@davemloft.net> Cc: Frederik Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: paulus@samba.org Cc: Peter Zijlstra <peterz@infradead.org> Cc: Robert Richter <robert.richter@amd.com> LKML-Reference: <4cf68aa7.0fedd80a.5294.1203@mx.google.com> Signed-off-by: NStephane Eranian <eranian@google.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
[acme@mica linux]$ perf stat ls > /dev/null Performance counter stats for 'ls': 1.512532 task-clock-msecs # 0.801 CPUs 2 context-switches # 0.001 M/sec 0 CPU-migrations # 0.000 M/sec 241 page-faults # 0.159 M/sec 2,973,331 cycles # 1965.797 M/sec 1,460,802 instructions # 0.491 IPC 314,642 branches # 208.023 M/sec 18,475 branch-misses # 5.872 % <not counted> cache-references <not counted> cache-misses 0.001887676 seconds time elapsed To get the previous behaviour just use --no-big-num: [acme@mica linux]$ perf stat --no-big-num ls > /dev/null Performance counter stats for 'ls': 1.468014 task-clock-msecs # 0.795 CPUs 1 context-switches # 0.001 M/sec 0 CPU-migrations # 0.000 M/sec 241 page-faults # 0.164 M/sec 2900254 cycles # 1975.631 M/sec 1437991 instructions # 0.496 IPC 310905 branches # 211.786 M/sec 17912 branch-misses # 5.761 % <not counted> cache-references <not counted> cache-misses 0.001845435 seconds time elapsed [acme@mica linux]$ Suggested-by: NIngo Molnar <mingo@elte.hu> Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephane Eranian <eranian@google.com> LKML-Reference: <new-submission> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Shawn Bohrer 提交于
Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1291168642-11402-12-git-send-email-shawn.bohrer@gmail.com> Signed-off-by: NShawn Bohrer <shawn.bohrer@gmail.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Shawn Bohrer 提交于
Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1291168642-11402-13-git-send-email-shawn.bohrer@gmail.com> Signed-off-by: NShawn Bohrer <shawn.bohrer@gmail.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Shawn Bohrer 提交于
Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1291168642-11402-15-git-send-email-shawn.bohrer@gmail.com> Signed-off-by: NShawn Bohrer <shawn.bohrer@gmail.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Shawn Bohrer 提交于
Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1291168642-11402-14-git-send-email-shawn.bohrer@gmail.com> Signed-off-by: NShawn Bohrer <shawn.bohrer@gmail.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Shawn Bohrer 提交于
Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1291168642-11402-11-git-send-email-shawn.bohrer@gmail.com> Signed-off-by: NShawn Bohrer <shawn.bohrer@gmail.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Shawn Bohrer 提交于
Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1291168642-11402-10-git-send-email-shawn.bohrer@gmail.com> Signed-off-by: NShawn Bohrer <shawn.bohrer@gmail.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Shawn Bohrer 提交于
Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1291168642-11402-9-git-send-email-shawn.bohrer@gmail.com> Signed-off-by: NShawn Bohrer <shawn.bohrer@gmail.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Shawn Bohrer 提交于
Acked-by: NMasami Hiramatsu <masami.hiramatsu.pt@hitachi.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1291168642-11402-8-git-send-email-shawn.bohrer@gmail.com> Signed-off-by: NShawn Bohrer <shawn.bohrer@gmail.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Shawn Bohrer 提交于
Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1291168642-11402-7-git-send-email-shawn.bohrer@gmail.com> Signed-off-by: NShawn Bohrer <shawn.bohrer@gmail.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Shawn Bohrer 提交于
Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1291168642-11402-6-git-send-email-shawn.bohrer@gmail.com> Signed-off-by: NShawn Bohrer <shawn.bohrer@gmail.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Shawn Bohrer 提交于
Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1291168642-11402-5-git-send-email-shawn.bohrer@gmail.com> Signed-off-by: NShawn Bohrer <shawn.bohrer@gmail.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Shawn Bohrer 提交于
The --displacement and --modules options to perf diff both use -m as a short flag. Change --displacement to use -M since other perf commands use -m, --modules. Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1291168642-11402-4-git-send-email-shawn.bohrer@gmail.com> Signed-off-by: NShawn Bohrer <shawn.bohrer@gmail.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Shawn Bohrer 提交于
Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1291168642-11402-3-git-send-email-shawn.bohrer@gmail.com> Signed-off-by: NShawn Bohrer <shawn.bohrer@gmail.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Shawn Bohrer 提交于
Cc: Ingo Molnar <mingo@elte.hu> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> LKML-Reference: <1291168642-11402-2-git-send-email-shawn.bohrer@gmail.com> Signed-off-by: NShawn Bohrer <shawn.bohrer@gmail.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
- 01 12月, 2010 4 次提交
-
-
由 Corey Ashford 提交于
There are number of issues that prevent the use of multiple tracepoint events being specified in a -e/--event switch, separated by commas. For example, perf stat -e irq:irq_handler_entry,irq:irq_handler_exit ... fails because the tracepoint event parsing code doesn't recognize the comma separator properly. This patch corrects those issues. Cc: Frederic Weisbecker <fweisbec@gmail.com> Cc: Ingo Molnar <mingo@elte.hu> Cc: Julia Lawall <julia@diku.dk> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Reported-by: NMichael Ellerman <michaele@au1.ibm.com> LKML-Reference: <1291156021-17711-1-git-send-email-cjashfor@linux.vnet.ibm.com> Signed-off-by: NCorey Ashford <cjashfor@linux.vnet.ibm.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Don Zickus 提交于
There seems to be a new dependency on arch/*/lib/memcpy*.S when compiling the perf tool. Make sure that file is included in the MANIFEST when creating the tarball. Cc: Ingo Molnar <mingo@elte.hu> LKML-Reference: <1291155133-3499-2-git-send-email-dzickus@redhat.com> Signed-off-by: NDon Zickus <dzickus@redhat.com> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Arnaldo Carvalho de Melo 提交于
No need to check that many times if debug_trace is on. Cc: Frédéric Weisbecker <fweisbec@gmail.com> Cc: Mike Galbraith <efault@gmx.de> Cc: Peter Zijlstra <a.p.zijlstra@chello.nl> Cc: Paul Mackerras <paulus@samba.org> Cc: Stephane Eranian <eranian@google.com> LKML-Reference: <new-submission> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-
由 Thomas Gleixner 提交于
The ordered sample code allocates singular reference objects struct sample_queue which have 48byte size on 64bit and 20 bytes on 32bit. That's silly. Allocate ~64k sized chunks and hand them out. Performance gain: ~ 15% Cc: Ingo Molnar <mingo@elte.hu> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Frederic Weisbecker <fweisbec@gmail.com> LKML-Reference: <20101130163820.398713983@linutronix.de> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
-