- 07 2月, 2012 2 次提交
-
-
由 Pradeep A Dalvi 提交于
Replaced deprecating dev_alloc_skb with netdev_alloc_skb in drivers/net/ethernet - Removed extra skb->dev = dev after netdev_alloc_skb Signed-off-by: NPradeep A Dalvi <netdev@pradeepdalvi.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pradeep A Dalvi 提交于
Replaced deprecating dev_alloc_skb with netdev_alloc_skb in drivers/net/ethernet - Removed extra skb->dev = dev after netdev_alloc_skb Signed-off-by: NPradeep A Dalvi <netdev@pradeepdalvi.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 2月, 2012 7 次提交
-
-
由 Michael Chan 提交于
When bnx2x returns error on FCoE SPQ messages, generate an error completion to bnx2fc immediately to speed up error recovery. This will eliminate length timeouts and spped up the reset of the device. Signed-off-by: NBhanu Prakash Gollapudi <bprakash@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Vlad Zolotarov 提交于
Sync DMA descriptor before hitting the TX mailbox for weak memory model CPUs. There has been discussions several years ago about this. Some believe that writel() should guarantee ordering. Others want explicit barriers if necessary. Today writel() does not have the ordering guarantee and many other drivers use explicit barriers. Signed-off-by: NVlad Zolotarov <vlad@scalemp.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael Chan 提交于
Allow the user to override the default number of RSS/TSS rings. Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jesper Juhl 提交于
Signed-off-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Haiyang Zhang 提交于
The memory has been allocated by kzalloc, so it's unnecessary to memset again. Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Haiyang Zhang 提交于
The first assignment to variable "net" is wrong, but overridden by the latter assignments. So the bug isn't manifested. Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Haiyang Zhang 提交于
Signed-off-by: NHaiyang Zhang <haiyangz@microsoft.com> Signed-off-by: NK. Y. Srinivasan <kys@microsoft.com> Reviewed-by: NJesper Juhl <jj@chaosbits.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 2月, 2012 21 次提交
-
-
由 Masanari Iida 提交于
Correct spelling "reseting" to "resetting" in drivers/net/ethernet/mellanox/mlx4/cmd.c Signed-off-by: NMasanari Iida <standby24x7@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Joe Perches 提交于
Cascading "if/else if"'s are ugly. Signed-off-by: NJoe Perches <joe@perches.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Padmanabh Ratnakar 提交于
VFs use get mac list command to get their mac address. The format of this command has changed. Update driver to use the new format. Signed-off-by: NMammatha Edhala <mammatha.edhala@emulex.com> Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Padmanabh Ratnakar 提交于
Version number in query link status command is getting overwritten in be_wrb_cmd_hdr_prepare() routine. Move the initialization to fix this issue. Also initialize the domain field. Signed-off-by: NPadmanabh Ratnakar <padmanabh.ratnakar@emulex.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
Implement RX flip buffer in the cfhsi_rx_done function, piggy-backed frames is also supported. This gives a significant performance gain for CAIF over HSI. Signed-off-by: NSjur Brændeland <sjur.brandeland@stericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neel Patel 提交于
Check if firmware supports a particular command by first checking capability using devcmd CMD_CAPABILITY. Signed-off-by: NNeel Patel <neepatel@cisco.com> Signed-off-by: NChristian Benvenuti <benve@cisco.com> Signed-off-by: NRoopa Prabhu <roprabhu@cisco.com> Signed-off-by: NNishank Trivedi <nistrive@cisco.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Neel Patel 提交于
This patch enables support for multiple receive queues. If multiple receive queues are used ingress traffic is hashed into one of the receive queues based on IP or TCP or both headers. The max number of supported receive queues per vnic is 8. Signed-off-by: NNeel Patel <neepatel@cisco.com> Signed-off-by: NChristian Benvenuti <benve@cisco.com> Signed-off-by: NRoopa Prabhu <roprabhu@cisco.com> Signed-off-by: NNishank Trivedi <nistrive@cisco.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jitendra Kalsaria 提交于
Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jitendra Kalsaria 提交于
Driver was leaking memory when page allocation failures occurs. Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jitendra Kalsaria 提交于
Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jitendra Kalsaria 提交于
we have copied skb into addr(page), skb->data doesn't contain ip header information. Signed-off-by: NJitendra Kalsaria <jitendra.kalsaria@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Manish chopra 提交于
Log dump status. Remove unmatched qlcnic_api_unlock call. Update version to 5.0.26. Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sritej Velaga 提交于
Check bits 8-28 of peg_halt status register for firmware abort code. Signed-off-by: NSritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sony Chacko 提交于
Report valid link statistics when link is down. Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sritej Velaga 提交于
When firmware hang is detected, fw should stop sending pause control frames. Signed-off-by: NSritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sony Chacko 提交于
o Update version to 4.0.78 Signed-off-by: NSony Chacko <sony.chacko@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rajesh Borundia 提交于
o Pass adapter->pdev->dev instead of netdev->dev Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sritej Velaga 提交于
Log states of essential registers on firmware hang detection. Signed-off-by: NSritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sritej Velaga 提交于
Pass the adapter phy link status to the caller. Signed-off-by: NSritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Manish chopra 提交于
Signed-off-by: NManish Chopra <manish.chopra@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Sritej Velaga 提交于
Reading CRB registers(if reqd) before releasing the api lock. Signed-off-by: NSritej Velaga <sritej.velaga@qlogic.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 2月, 2012 10 次提交
-
-
由 Masanari Iida 提交于
Correct spelling "packtetbuf_num" to "packetbuf_num" in drivers/net/ethernet/intel/ixgbe/ixgbe_common.h Signed-off-by: NMasanari Iida <standby24x7@gmail.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com>
-
由 Mitch A Williams 提交于
Change copyright date to 2012 in the source files. Signed-off-by: NMitch Williams <mitch.a.williams@intel.com> Tested-by: NRobert E Garrett <robertX.e.garrett@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Greg Rose 提交于
Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Tested-by: NRobert E Garrett <robertX.e.garrett@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Greg Rose 提交于
Remove jump to out label that was skipping over code to replace the ack bit in the mailbox cache variable. This was causing driver mailbox routines that poll for the PF to ack a message to time out which would in turn cause all other mailbox messages to fail. Also replace the mailbox cache variable message indication bit when a message is found so that other functions that choose to poll for a mailbox message from the PF won't miss it. Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Tested-by: NRobert E Garrett <robertX.e.garrett@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Stephen Hemminger 提交于
Signed-off-by: NStephen Hemminger <shemminger@vyatta.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Greg Rose 提交于
Send message to system log when the VF requests another MAC filter but there is no space left on the device for it. Signed-off-by: NGreg Rose <gregory.v.rose@intel.com> Tested-by: NRobert E Garrett <robertX.e.garrett@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Don Skidmore 提交于
New year so bump the copyright date. Signed-off-by: NDon Skidmore <donald.c.skidmore@intel.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
由 Wolfgang Grandegger 提交于
Cc: uclinux-dist-devel@blackfin.uclinux.org Cc: Anant Gole <anantgole@ti.com> Cc: Chris Elston <celston@katalix.com> Cc: Sebastian Haas <haas@ems-wuensche.com> Cc: Matthias Fuchs <matthias.fuchs@esd.eu> Signed-off-by: NWolfgang Grandegger <wg@grandegger.com> Acked-by: NSebastian Haas <dev@sebastianhaas.info> Acked-by: NMike Frysinger <vapier@gentoo.org> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Wolfgang Grandegger 提交于
Cc: Anant Gole <anantgole@ti.com> Signed-off-by: NWolfgang Grandegger <wg@grandegger.com> Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-
由 Tomoya MORINAGA 提交于
Current menu description, not easy to understand what the description means. So, add information about the device. Signed-off-by: NTomoya MORINAGA <tomoya.rohm@gmail.com> [mkl: Added space before opening parentheses in Kconfig. Make commit message more descriptive.] Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
-