- 08 3月, 2014 2 次提交
-
-
由 hayeswang 提交于
Check tx agg list before spin lock to avoid doing spin lock every times. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
Use spin_lock and spin_unlock in interrupt context. The ndo_start_xmit would not be called in interrupt context, so replace the relative spin_lock_irqsave and spin_unlock_irqrestore with spin_lock_bh and spin_unlock_bh. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 3月, 2014 3 次提交
-
-
由 hayeswang 提交于
The rtl8152_get_stats() returns the point address of the struct net_device_stats. This could be got from struct net_device directly. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
Replace some tp->netdev with netdev. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
Add or remove some empty lines. Replace the spaces with the tabs. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 03 3月, 2014 1 次提交
-
-
由 Gerry Demaret 提交于
Add the USB device ID for the D-Link DUB-1312 USB 3.0 to Gigabit Ethernet Adapter to the AX88179/178A driver. Signed-off-by: NGerry Demaret <gerry@tigron.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 2月, 2014 1 次提交
-
-
由 Freddy Xin 提交于
Add VID:DID for Lenovo OneLinkDock Gigabit LAN Signed-off-by: NFreddy Xin <freddy@asix.com.tw> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 2月, 2014 14 次提交
-
-
由 hayeswang 提交于
Support get_msglevel and set_msglevel. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
Set disable_hub_initiated_lpm = 1. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
Replace netif_rx with netif_receive_skb to avoid disabling irq frequently for increasing the efficiency. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
Disable teredo for RTL8152 by default. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
Support runtime suspend for RTL8152 and RTL8153. Move tx_bottom() from tasklet to delayed_work. That avoids to transmit tx packets after calling autosuspend. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
Support WOL for RTL8152 and RTL8153. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
Add up method for rtl_ops and asign relative functions. Move clear_bp() and hw_phy_cfg() from init method to up method of rtl_ops. Call rtl_ops.up() for ndo_open() and rtl_ops.down for ndo_stop(). Replace allocating the memory in probe() with in ndo_open(). Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
PHY reset is necessary after some hw settings. However, it would cause the linking down, and so does the set_speed function. Combine the PHY reset with set_speed function. That could reduce the frequency of linking down and accessing the PHY register. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
Modify the method of enabling the PHY to clear BMCR_PDOWN only. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
Replace getting one item from a list with getting the whole list one time. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
Except for RTL_VER_01, replace loading the MAC address from PLA_IDR with from PLA_BACKUP. The default MAC address may be modified by the other OS, so the PLA_IDR may be not the default MAC address. The data in the PLA_BACKUP address of the RTL_VER_01 may be destoryed, so load MAC address from PLA_IDR for RTL_VER_01. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
Modify the following functions. - r8153_u1u2en - r8153_u2p3en - r8153_power_cut_en Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
Replace some codes with the following three functions. - rtl_drop_queued_tx - rxdy_gated_en - r8152_power_cut_en Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
Move the following functions which is for the further coding. - rtl_clear_bp - r8153_clear_bp - r8153_teredo_off - r8152b_disable_aldps - r8152b_enable_aldps - r8152b_hw_phy_cfg Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 2月, 2014 1 次提交
-
-
由 Emil Goode 提交于
This patch removes a generic hard_header_len check from the usbnet module that is causing dropped packages under certain circumstances for devices that send rx packets that cross urb boundaries. One example is the AX88772B which occasionally send rx packets that cross urb boundaries where the remaining partial packet is sent with no hardware header. When the buffer with a partial packet is of less number of octets than the value of hard_header_len the buffer is discarded by the usbnet module. With AX88772B this can be reproduced by using ping with a packet size between 1965-1976. The bug has been reported here: https://bugzilla.kernel.org/show_bug.cgi?id=29082 This patch introduces the following changes: - Removes the generic hard_header_len check in the rx_complete function in the usbnet module. - Introduces a ETH_HLEN check for skbs that are not cloned from within a rx_fixup callback. - For safety a hard_header_len check is added to each rx_fixup callback function that could be affected by this change. These extra checks could possibly be removed by someone who has the hardware to test. - Removes a call to dev_kfree_skb_any() and instead utilizes the dev->done list to queue skbs for cleanup. The changes place full responsibility on the rx_fixup callback functions that clone skbs to only pass valid skbs to the usbnet_skb_return function. Signed-off-by: NEmil Goode <emilgoode@gmail.com> Reported-by: NIgor Gnatenko <i.gnatenko.brain@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 2月, 2014 1 次提交
-
-
由 Emil Goode 提交于
The struct driver_info ax88178_info is assigned the function asix_rx_fixup_common as it's rx_fixup callback. This means that FLAG_MULTI_PACKET must be set as this function is cloning the data and calling usbnet_skb_return. Not setting this flag leads to usbnet_skb_return beeing called a second time from within the rx_process function in the usbnet module. Signed-off-by: NEmil Goode <emilgoode@gmail.com> Reported-by: NBjørn Mork <bjorn@mork.no> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 2月, 2014 3 次提交
-
-
由 Liu Junliang 提交于
Signed-off-by: NLiu Junliang <liujunliang_ljl@163.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jingoo Han 提交于
Use %zu for size_t in order to avoid the following build warning in printks. drivers/net/usb/sr9800.c: In function 'sr9800_bind' drivers/net/usb/sr9800.c:826:2: warning: format '%ld' expects argument of type 'long int' but argument 5 has type 'size_t' [-Wformat] Signed-off-by: NJingoo Han <jg1.han@samsung.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Aleksander Morgado 提交于
When the PXS8 and PHS8 devices show up with PID 0x0053 they will expose both a QMI port and a WWAN interface. CC: Hans-Christoph Schemmel <hans-christoph.schemmel@gemalto.com> CC: Christian Schmiedl <christian.schmiedl@gemalto.com> CC: Nicolaus Colberg <nicolaus.colberg@gemalto.com> CC: David McCullough <david.mccullough@accelecon.com> Signed-off-by: NAleksander Morgado <aleksander@aleksander.es> Acked-by: NBjørn Mork <bjorn@mork.no> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 2月, 2014 1 次提交
-
-
由 Liu Junliang 提交于
Signed-off-by: NLiu Junliang <liujunliang_ljl@163.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 2月, 2014 1 次提交
-
-
由 Raymond Wanyoike 提交于
The driver description files give these descriptions to the vendor specific ports on this modem: VID_19D2&PID_1270&MI_00: "ZTE MF667 Diagnostics Port" VID_19D2&PID_1270&MI_01: "ZTE MF667 AT Port" VID_19D2&PID_1270&MI_02: "ZTE MF667 ATExt2 Port" VID_19D2&PID_1270&MI_03: "ZTE MF667 ATExt Port" VID_19D2&PID_1270&MI_04: "ZTE MF667 USB Modem" VID_19D2&PID_1270&MI_05: "ZTE MF667 Network Adapter" Signed-off-by: NRaymond Wanyoike <raymond.wanyoike@gmail.com> Acked-by: NBjørn Mork <bjorn@mork.no> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 2月, 2014 2 次提交
-
-
由 Dan Carpenter 提交于
It seems like this function was intended to have special handling for urb statuses of -ENOENT and -ECONNRESET. But now it just prints some debugging and returns at the start of the function. I have removed the dead code, it's still in the git history if anyone wants to revive it. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
The submission of the interrupt transfer should be done after setting the bit of WORK_ENABLE, otherwise the callback function would have the opportunity to be returned directly. Clear the bit of WORK_ENABLE before killing the interrupt transfer. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 2月, 2014 1 次提交
-
-
由 Bjørn Mork 提交于
This device was mentioned in an OpenWRT forum. Seems to have a "standard" Sierra Wireless ifnumber to function layout: 0: qcdm 2: nmea 3: modem 8: qmi 9: storage Signed-off-by: NBjørn Mork <bjorn@mork.no> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 1月, 2014 1 次提交
-
-
由 Paul Gortmaker 提交于
None of these files are actually using any __init type directives and hence don't need to include <linux/init.h>. Most are just a left over from __devinit and __cpuinit removal, or simply due to code getting copied from one driver to the next. This covers everything under drivers/net except for wireless, which has been submitted separately. Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 15 1月, 2014 4 次提交
-
-
由 hayeswang 提交于
Remove the limitation that the ecm and r8152 drivers couldn't coexist. - Remove the devices from the blacklist of relative drivers. - Remove usb_driver_set_configuration() from r8152 driver. - Modify the id_table of the r8152 driver for the vendor mode only. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
Fix the following warnings and error: - WARNING: usb_free_urb(NULL) is safe this check is probably not required - WARNING: kfree(NULL) is safe this check is probably not required - ERROR: do not use C99 // comments Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
The r8152 could support RTL8153. Update the relative descriptor. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Peter Korsgaard 提交于
A number of new dm96xx variants now exist. Reported-by: NJoseph Chang <joseph_chang@davicom.com.tw> Signed-off-by: NPeter Korsgaard <peter@korsgaard.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 1月, 2014 1 次提交
-
-
由 Bjørn Mork 提交于
Commit 60e453a9 ("USBNET: fix handling padding packet") added an extra SG entry in case padding is necessary, but failed to update the initialisation of the list. This can cause list traversal to fall off the end of the list, resulting in an oops. Fixes: 60e453a9 ("USBNET: fix handling padding packet") Reported-by: NThomas Kear <thomas@kear.co.nz> Cc: Ming Lei <ming.lei@canonical.com> Signed-off-by: NBjørn Mork <bjorn@mork.no> Tested-by: NMing Lei <ming.lei@canonical.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 1月, 2014 3 次提交
-
-
由 Hayes Wang 提交于
- Replace pr_warn_ratelimited() with net_ratelimit() and netdev_warn(). - Adjust the algnment of some messages. - Remove the peroid. - Fix some messages don't have terminating newline. Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Williams 提交于
The existing serial state notification handling expected older Option devices, having a hardcoded assumption that the Modem port was always USB interface #2. That isn't true for devices from the past few years. hso_serial_state_notification is a local cache of a USB Communications Interface Class SERIAL_STATE notification from the device, and the USB CDC specification (section 6.3, table 67 "Class-Specific Notifications") defines wIndex as the USB interface the event applies to. For hso devices this will always be the Modem port, as the Modem port is the only port which is set up to receive them by the driver. So instead of always expecting USB interface #2, instead validate the notification with the actual USB interface number of the Modem port. Signed-off-by: NDan Williams <dcbw@redhat.com> Tested-by: NH. Nikolaus Schaller <hns@goldelico.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 hayeswang 提交于
Replace the boolean value with the error code for the return value of the rtl_ops_init(). Signed-off-by: NHayes Wang <hayeswang@realtek.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-