- 03 8月, 2010 3 次提交
-
-
由 Mauro Carvalho Chehab 提交于
This is a big patch, yet trivial. It just move the RC properties to a separate struct, in order to prepare the dvb-usb drivers to use rc-core. There's no change on the behavior of the drivers. With this change, it is possible to have both legacy and rc-core based code inside the dvb-usb-remote, allowing a gradual migration to rc-core, driver per driver. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mauro Carvalho Chehab 提交于
dvb-usb has its own IR handle code. Now that we have a Remote Controller subsystem, we should start using it. So, remove this struct, in favor of the similar struct defined at the RC subsystem. This is a big, but trivial patch. It is a 3 line delect, plus lots of rename on several dvb-usb files. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Add USB ID 07ca:815a for AverMedia AVerTV Volar M (A815Mac). Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 19 5月, 2010 1 次提交
-
-
由 Mauro Carvalho Chehab 提交于
Several DVB drivers use a different name convention. As we're moving the keytables, we need to use the same convention on all places. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 18 5月, 2010 2 次提交
-
-
由 Antti Palosaari 提交于
Add USB ID 1b80:e39a for KWorld TV Stick II (395UR). Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Add USB ID 1b80:e383 for KWorld USB DVB-T Stick Mobile (UB383-T). Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 30 3月, 2010 1 次提交
-
-
由 Tejun Heo 提交于
include cleanup: Update gfp.h and slab.h includes to prepare for breaking implicit slab.h inclusion from percpu.h percpu.h is included by sched.h and module.h and thus ends up being included when building most .c files. percpu.h includes slab.h which in turn includes gfp.h making everything defined by the two files universally available and complicating inclusion dependencies. percpu.h -> slab.h dependency is about to be removed. Prepare for this change by updating users of gfp and slab facilities include those headers directly instead of assuming availability. As this conversion needs to touch large number of source files, the following script is used as the basis of conversion. http://userweb.kernel.org/~tj/misc/slabh-sweep.py The script does the followings. * Scan files for gfp and slab usages and update includes such that only the necessary includes are there. ie. if only gfp is used, gfp.h, if slab is used, slab.h. * When the script inserts a new include, it looks at the include blocks and try to put the new include such that its order conforms to its surrounding. It's put in the include block which contains core kernel includes, in the same order that the rest are ordered - alphabetical, Christmas tree, rev-Xmas-tree or at the end if there doesn't seem to be any matching order. * If the script can't find a place to put a new include (mostly because the file doesn't have fitting include block), it prints out an error message indicating which .h file needs to be added to the file. The conversion was done in the following steps. 1. The initial automatic conversion of all .c files updated slightly over 4000 files, deleting around 700 includes and adding ~480 gfp.h and ~3000 slab.h inclusions. The script emitted errors for ~400 files. 2. Each error was manually checked. Some didn't need the inclusion, some needed manual addition while adding it to implementation .h or embedding .c file was more appropriate for others. This step added inclusions to around 150 files. 3. The script was run again and the output was compared to the edits from #2 to make sure no file was left behind. 4. Several build tests were done and a couple of problems were fixed. e.g. lib/decompress_*.c used malloc/free() wrappers around slab APIs requiring slab.h to be added manually. 5. The script was run on all .h files but without automatically editing them as sprinkling gfp.h and slab.h inclusions around .h files could easily lead to inclusion dependency hell. Most gfp.h inclusion directives were ignored as stuff from gfp.h was usually wildly available and often used in preprocessor macros. Each slab.h inclusion directive was examined and added manually as necessary. 6. percpu.h was updated not to include slab.h. 7. Build test were done on the following configurations and failures were fixed. CONFIG_GCOV_KERNEL was turned off for all tests (as my distributed build env didn't work with gcov compiles) and a few more options had to be turned off depending on archs to make things build (like ipr on powerpc/64 which failed due to missing writeq). * x86 and x86_64 UP and SMP allmodconfig and a custom test config. * powerpc and powerpc64 SMP allmodconfig * sparc and sparc64 SMP allmodconfig * ia64 SMP allmodconfig * s390 SMP allmodconfig * alpha SMP allmodconfig * um on x86_64 SMP allmodconfig 8. percpu.h modifications were reverted so that it could be applied as a separate patch and serve as bisection point. Given the fact that I had only a couple of failures from tests on step 6, I'm fairly confident about the coverage of this conversion patch. If there is a breakage, it's likely to be something in one of the arch headers which should be easily discoverable easily on most builds of the specific arch. Signed-off-by: NTejun Heo <tj@kernel.org> Guess-its-ok-by: NChristoph Lameter <cl@linux-foundation.org> Cc: Ingo Molnar <mingo@redhat.com> Cc: Lee Schermerhorn <Lee.Schermerhorn@hp.com>
-
- 27 2月, 2010 9 次提交
-
-
由 Antti Palosaari 提交于
There is no driver for new NXP TDA18218 tuner which is used by few recent af9015 designs. af9015 uses number 179 as ID for that tuner. Inform this tuner is not supported when device using that tuner is meet. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Autodetect MYGICTV U718 from eeprom hash and select remote automatically. Remove old iManufacturer string compare based remote selection logic. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Autodetect A-Link DTU(m) based eeprom hash and select correct remote. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Add USB ID 0413:6a04 for Leadtek WinFast DTV2000DS. Thanks to Gavin Ramm <gavin_ramm@hotmail.com> for reporting this. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Add USB ID 1b80:e402 for DigitalNow TinyTwin version 2. Thanks to Trevor Phillips <trevor.phillips@gmail.com> for reporting this. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jiri Slaby 提交于
So as a final patch, add support for hash and one hash entry for MSI digi vox mini II: iManufacturer 1 Afatech iProduct 2 DVB-T 2 iSerial 3 010101010600001 It is now handled with proper IR and key map tables. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Acked-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jiri Slaby 提交于
Add af9015_setup structure to hold (right now only remote) setup of distinct receivers. Add af9015_setup_match for matching ids against tables. This is for easier matching different kind of ids against tables to obtain setups. Currently module parameters and usb vendor ids are switched into and matched against tables. Hashes will follow. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Acked-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jiri Slaby 提交于
This is just a code shuffle without functional changes. For easier review of later changes, i.e. preparation. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Acked-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jiri Slaby 提交于
This will be useful for matching of IR tables later. We read the eeprom anyway for dumping. Switch the dumping to print_hex_dump_bytes and compute hash above that by hash = 0; for (u32 VAL) in (eeprom): hash *= GOLDEN_RATIO_PRIME_32 hash += VAL; // while preserving endinaness The computation is moved earlier to the flow, namely from af9015_af9013_frontend_attach to af9015_read_config, so that we can access the sum in af9015_read_config already. Signed-off-by: NJiri Slaby <jslaby@suse.cz> Acked-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 06 12月, 2009 5 次提交
-
-
由 Ignacio de Miguel Diaz 提交于
Add USB ID 1b80:e39d for Sveon STV20 Tuner USB DVB-T HDTV. Signed-off-by: NIgnacio de Miguel Diaz <imigueldiaz@gmail.com> Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Looks like eeprom IR mode byte value 0x04 means there is remote which should be polled. Patch enables polling also in case of 0x04. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Support for MSI DIGIVOX mini III remote. Thanks to Aleksandr V. Piskunov <aleksandr.v.piskunov@gmail.com> Thanks to Roman <lists@hasnoname.de> Cc: Aleksandr V. Piskunov <aleksandr.v.piskunov@gmail.com> Cc: Roman <lists@hasnoname.de> Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Add USB ID 1b80:c161 for KWorld PlusTV DVB-T PCI Pro Card (DVB-T PC160-T). Thanks to Andrew Cruickshank <atcrank@gmail.com> for reporting this. Cc: Andrew Cruickshank <atcrank@gmail.com> Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 19 9月, 2009 4 次提交
-
-
由 Antti Palosaari 提交于
And mask should be 0xff00 instead of 0xae00. Thanks to Jochen Friedrich <jochen@scram.de> for pointing this. Cc: Jochen Friedrich <jochen@scram.de> Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
* define names for few values * decrease buffer len by one byte which was not used * add check for buffer overflow for sure * indentation fixes * remove useless 0 len check from memcpy It should not happen and if it happens memcpy should not do anything. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Fix wrongly configured USB1.1 TS EP. Patch serie also increases USB URB size to reduce wakeups. USB1.1 URB size from 64 to 940 bytes USB2.0 URB size from 512 to 16356 bytes Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jose Alberto Reguero 提交于
Fix wrongly configured USB2.0 TS EP. Signed-off-by: NJose Alberto Reguero <jareguero@telefonica.net> Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 12 9月, 2009 3 次提交
-
-
由 Mauro Carvalho Chehab 提交于
In order to be closer to V4L IR implementation, it is needed to replace u8 custom, data to: u16 scan This allows using non-rc5 mappings, like the 8 bit keycodes used on older protocols. It will also allow future implementations of rc6 keystrokes when needed. Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Mart Raudsepp 提交于
Add new USB ID (1b80:e400) for KWorld PlusTV Dual DVB-T Stick (DVB-T 399U). The model number on the devices sticker label is "KW-DVB-T 399UR". Signed-off-by: NMart Raudsepp <mart.raudsepp@artecdesign.ee> Acked-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Jan Nikitenko 提交于
Replace printing to magically sized temporary buffer with use of KERN_CONT for continual printing of eeprom registers dump. Since deb_info is defined as dprintk, which is conditionally defined to printk without additional parameters, meaning that deb_info is equivalent to direct printk (without adding KERN_ facility), we can use KERN_DEBUG and KERN_CONT in there, eliminating the need for sprintf into temporary buffer with not easily readable/magical size. Though it's strange, that deb_info definition uses printk without KERN_ facility and callers don't use it either. Signed-off-by: NJan Nikitenko <jan.nikitenko@gmail.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 14 8月, 2009 1 次提交
-
-
由 Nils Kassube 提交于
Moving BOOT fixes problem. Signed-off-by: NNils Kassube <kassube@gmx.net> Acked-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NDouglas Schilling Landgraf <dougsland@redhat.com> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 17 6月, 2009 6 次提交
-
-
由 Jan Nikitenko 提交于
This patch fixes stack corruption bug present in af9015_eeprom_dump(): the buffer buf is one byte smaller than required - there is 4 chars for address prefix, 16*3 chars for dump of 16 eeprom bytes per line and 1 byte for zero ending the string required, i.e. 53 bytes, but only 52 are provided. The one byte missing in stack based buffer buf causes following oops on MIPS little endian platform, because i2c_adap pointer in af9015_af9013_frontend_attach() is corrupted by inlined function af9015_eeprom_dump(): CPU 0 Unable to handle kernel paging request at virtual address 00000000, epc == 803a4488, ra == c049a1c8 Oops[#1]: Cpu 0 $ 0 : 00000000 10003c00 00000000 803a4468 $ 4 : 8f17c600 8f067b30 00000002 00000038 $ 8 : 00000001 8faf3e98 11da000d 09010002 $12 : 00000000 00000000 00000000 0000000a $16 : 8f17c600 8f067b68 8faf3c00 8f067c04 $20 : 8f067b9c 00000100 8f067bf0 80104100 $24 : 00000000 2aba9fb0 $28 : 8f066000 8f067af0 802cbc48 c049a1c8 Hi : 00000000 Lo : 00000000 epc : 803a4488 i2c_transfer+0x20/0x104 Not tainted ra : c049a1c8 af9013_read_reg+0x78/0xc4 [af9013] Status: 10003c03 KERNEL EXL IE Cause : 00808008 BadVA : 00000000 PrId : 03030200 (Au1550) Modules linked in: af9013 dvb_usb_af9015(+) dvb_usb dvb_core firmware_class i2c_au1550 au1550_spi Process modprobe (pid: 2757, threadinfo=8f066000, task=8fade098, tls=2aad6470) Stack : c049f5e0 80163090 805ba880 00000100 8f067bf0 0000d733 8f067b68 8faf3c00 8f067c04 c049a1c8 80163bc0 8056a630 8f067b40 80163224 80569fc8 8f0033d7 00000038 80140003 8f067b2c 00010038 c0420001 8f067b28 c049f5e0 00000004 00000004 c049a524 c049d5a8 c049d5a8 00000000 803a6700 00000000 8f17c600 c042a7a4 8f17c600 c042a7a4 c049c924 00000000 00000000 00000002 613a6c00 ... Call Trace: [<803a4488>] i2c_transfer+0x20/0x104 [<c049a1c8>] af9013_read_reg+0x78/0xc4 [af9013] [<c049a524>] af9013_read_reg_bits+0x2c/0x70 [af9013] [<c049c924>] af9013_attach+0x98/0x65c [af9013] [<c04257bc>] af9015_af9013_frontend_attach+0x214/0x67c [dvb_usb_af9015] [<c03e2428>] dvb_usb_adapter_frontend_init+0x20/0x12c [dvb_usb] [<c03e1ad8>] dvb_usb_device_init+0x374/0x6b0 [dvb_usb] [<c0426120>] af9015_usb_probe+0x4fc/0xfcc [dvb_usb_af9015] [<80381024>] usb_probe_interface+0xbc/0x218 [<803227fc>] driver_probe_device+0x12c/0x30c [<80322a80>] __driver_attach+0xa4/0xac [<80321ed0>] bus_for_each_dev+0x60/0xd0 [<8032162c>] bus_add_driver+0x1e8/0x2a8 [<80322cdc>] driver_register+0x7c/0x17c [<80380d30>] usb_register_driver+0xa0/0x12c [<c042e030>] af9015_usb_module_init+0x30/0x6c [dvb_usb_af9015] [<8010d2a4>] __kprobes_text_end+0x3c/0x1f4 [<80167150>] sys_init_module+0xb8/0x1cc [<80102370>] stack_done+0x20/0x3c Code: afb10018 7000003f 00808021 <8c430000> 7000003f 1060002d 00c09021 8f830014 3c02efff Signed-off-by: NJan Nikitenko <jan.nikitenko@gmail.com> Acked-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Add USB ID (0458:4012) for Genius TVGo DVB-T03. Thanks to Petr Vodicka <vodicka.petr@email.cz> for reporting and testing. Tested-by: NPetr Vodicka <vodicka.petr@email.cz> Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Wen-chien Jesse Sung 提交于
Add USB ID (1b80:c810) for Kworld MC810. Signed-off-by: NWen-chien Jesse Sung <jesse@cola.voip.idv.tw> Acked-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Marcel Jueling 提交于
Add USB ID (1b80:e397) for Conceptronic USB2.0 DVB-T CTVDIGRCU V3.0. Signed-off-by: NMarcel Jueling <Marcel@Jueling.de> Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Add USB ID (07ca:a805) for AverMedia AVerTV Volar GPS 805 (A805). Thanks to Chris Brown <chrisneilbrown@gmail.com> for reporting and testing. Tested-by: NChris Brown <chrisneilbrown@gmail.com> Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Add 3rd dvb_usb_device_properties entry for upcoming USB IDs because current entries are full. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 07 4月, 2009 4 次提交
-
-
由 Stuart Hall 提交于
Patch to provide basic support for DigitalNow TinyTwin Remote. It uses same remote as TwinHan AzureWave AD-TU700(704J). Signed-off-by: NStuart Hall <mailing-lists@enginuities.com> Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Add USB ID (07ca:850a) and configuration hack for AverMedia AVerTV Volar Black HD (A850) DVB-T USB stick. Tested-by: NOlivier MENUEL <omenuel@laposte.net> Tested-by: NThomas Renard <threnard@gmail.com> Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Marc Schneider 提交于
Add USB ID (15a4:901b) and remote for TrekStor DVB-T USB Stick. Signed-off-by: NMarc Schneider <macke@macke.org> Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
由 Antti Palosaari 提交于
Add new USB ID (1b80:e395) for KWorld USB DVB-T TV Stick II (VS-DVB-T 395U). Thanks to Julian Aron Prenner <julian@linux4you.it> for reporting this. Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-
- 30 3月, 2009 1 次提交
-
-
由 Jochen Friedrich 提交于
Add MC44S803 support to AF9015 driver. Signed-off-by: NJochen Friedrich <jochen@scram.de> Signed-off-by: NAntti Palosaari <crope@iki.fi> Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>
-