提交 · 21395a1aac7ce1e19dbb43542a9e06cca2bfca01 · openeuler / raspberrypi-kernel

08 1月, 2014 15 次提交

usb: chipidea: move malloced regmap directly into struct hw_bank · 21395a1a

由 Marc Kleine-Budde 提交于 1月 06, 2014

Without this patch a seperate chunk of memory is allocated for the regmap
array. As the regmap is always used it makes no sense to allocate a seperate
memory block for it, this patch moves the regmap array directly into the struct
hw_bank.
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: NPeter Chen <peter.chen@freescale.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

21395a1a

USB: wusbcore: fix up coding style issues in wa-nep.c · 2627cb08

由 Rahul Bedarkar 提交于 1月 04, 2014

Signed-off-by: NRahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

2627cb08

USB: wusbcore: fix up coding style issues in wa-rpipe.c · 0c106d0a

由 Rahul Bedarkar 提交于 1月 04, 2014

Signed-off-by: NRahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

0c106d0a

USB: wusbcore: fix up coding style issues in wusbhc.c and wusbhc.h · a7737e34

由 Rahul Bedarkar 提交于 1月 04, 2014

Signed-off-by: NRahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

a7737e34

USB: wusbcore: fix up line break coding style issues in mmc.c · 48651317

由 Rahul Bedarkar 提交于 1月 04, 2014

Signed-off-by: NRahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

48651317

USB: wusbcore: fix up line break coding style issues in security.c · 521aea08

由 Rahul Bedarkar 提交于 1月 04, 2014

Signed-off-by: NRahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

521aea08

USB: wusbcore: fix up line break coding style issues in wa-hc.h · 62316ff4

由 Rahul Bedarkar 提交于 1月 04, 2014

Signed-off-by: NRahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

62316ff4

USB: wusbcore: fix up minor coding style issues in cbaf.c · b0b4cb5c

由 Rahul Bedarkar 提交于 1月 04, 2014

Signed-off-by: NRahul Bedarkar <rahulbedarkar89@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

b0b4cb5c

USB: wusbcore: correct spelling mistakes in comments and error string · 1076e7a4

由 Rahul Bedarkar 提交于 1月 04, 2014

Signed-off-by: NRahul Bedarkar <rahulbedarkar89@gmail.com>
Acked-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

1076e7a4

USB: core: correct spelling mistakes in comments and warning · 025d4430

由 Rahul Bedarkar 提交于 1月 04, 2014

Signed-off-by: NRahul Bedarkar <rahulbedarkar89@gmail.com>
Acked-by: NRandy Dunlap <rdunlap@infradead.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

025d4430

Watchdog: pcwd_usb: remove CONFIG_USB_DEBUG usage · d7e92f7f

由 Greg Kroah-Hartman 提交于 12月 19, 2013

CONFIG_USB_DEBUG is going away, and all of the other USB drivers no
longer rely on "debug" module parameters for debugging lines, so move
the pcwd_usb driver to use the dynamic debug infrastructure to be more
in line with the rest of the kernel.
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
Cc: Wim Van Sebroeck <wim@iguana.be>
Reviewed-by: NGuenter Roeck <linux@roeck-us.net>

d7e92f7f

USB: c67x00: move URB private data allocation from under spinlock · 252d74f6

由 Max Filippov 提交于 12月 25, 2013

This fixes the following warning:

  BUG: sleeping function called from invalid context at mm/slub.c:940
  in_atomic(): 1, irqs_disabled(): 1, pid: 17, name: khubd
  CPU: 0 PID: 17 Comm: khubd Not tainted 3.12.0-00004-g938dd60-dirty #1

   __might_sleep+0xbe/0xc0
   kmem_cache_alloc_trace+0x36/0x170
   c67x00_urb_enqueue+0x5c/0x254
   usb_hcd_submit_urb+0x66e/0x724
   usb_submit_urb+0x2ac/0x308
   usb_start_wait_urb+0x2c/0xb8
   usb_control_msg+0x8c/0xa8
   hub_port_init+0x191/0x718
   hub_thread+0x804/0xe14
   kthread+0x72/0x78
   ret_from_kernel_thread+0x8/0xc
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Acked-by: NPeter Korsgaard <peter@korsgaard.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

252d74f6

USB: c67x00: add proper delays to HPI read/write · 8f668fbb

由 Max Filippov 提交于 12月 25, 2013

According to CY7C67300 specification HPI read and write cycle duration
Tcyc must be at least 6T long, where T is 1/48MHz, which is 125ns.
Without this delay fast host processor cannot write to chip registers.
Add proper ndelay to hpi_{read,write}_reg.
Signed-off-by: NMax Filippov <jcmvbkbc@gmail.com>
Acked-by: NPeter Korsgaard <peter@korsgaard.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

8f668fbb

USB: fix race between hub_disconnect and recursively_mark_NOTATTACHED · 543d7784

由 Alan Stern 提交于 1月 07, 2014

There is a race in the hub driver between hub_disconnect() and
recursively_mark_NOTATTACHED().  This race can be triggered if the
driver is unbound from a device at the same time as the bus's root hub
is removed.  When the race occurs, it can cause an oops:

BUG: unable to handle kernel NULL pointer dereference at 0000015c
IP: [<c16d5fb0>] recursively_mark_NOTATTACHED+0x20/0x60
Call Trace:
 [<c16d5fc4>] recursively_mark_NOTATTACHED+0x34/0x60
 [<c16d5fc4>] recursively_mark_NOTATTACHED+0x34/0x60
 [<c16d5fc4>] recursively_mark_NOTATTACHED+0x34/0x60
 [<c16d5fc4>] recursively_mark_NOTATTACHED+0x34/0x60
 [<c16d6082>] usb_set_device_state+0x92/0x120
 [<c16d862b>] usb_disconnect+0x2b/0x1a0
 [<c16dd4c0>] usb_remove_hcd+0xb0/0x160
 [<c19ca846>] ? _raw_spin_unlock_irqrestore+0x26/0x50
 [<c1704efc>] ehci_mid_remove+0x1c/0x30
 [<c1704f26>] ehci_mid_stop_host+0x16/0x30
 [<c16f7698>] penwell_otg_work+0xd28/0x3520
 [<c19c945b>] ? __schedule+0x39b/0x7f0
 [<c19cdb9d>] ? sub_preempt_count+0x3d/0x50
 [<c125e97d>] process_one_work+0x11d/0x3d0
 [<c19c7f4d>] ? mutex_unlock+0xd/0x10
 [<c125e0e5>] ? manage_workers.isra.24+0x1b5/0x270
 [<c125f009>] worker_thread+0xf9/0x320
 [<c19ca846>] ? _raw_spin_unlock_irqrestore+0x26/0x50
 [<c125ef10>] ? rescuer_thread+0x2b0/0x2b0
 [<c1264ac4>] kthread+0x94/0xa0
 [<c19d0f77>] ret_from_kernel_thread+0x1b/0x28
 [<c1264a30>] ? kthread_create_on_node+0xc0/0xc0

One problem is that recursively_mark_NOTATTACHED() uses the intfdata
value and hub->hdev->maxchild while hub_disconnect() is clearing them.
Another problem is that it uses hub->ports[i] while the port device is
being released.

To fix this race, we need to hold the device_state_lock while
hub_disconnect() changes the values.  (Note that usb_disconnect()
and hub_port_connect_change() already acquire this lock at similar
critical times during a USB device's life cycle.)  We also need to
remove the port devices after maxchild has been set to 0, instead of
before.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Reported-by: N"Du, Changbin" <changbinx.du@intel.com>
Tested-by: N"Du, Changbin" <changbinx.du@intel.com>
CC: <stable@vger.kernel.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

543d7784

USB: fix: ohci-at91 mismerge build error · 1f53b485

由 Arnd Bergmann 提交于 1月 07, 2014

After commit 99f14bd4 "Merge 3.13-rc5 into usb-next" (in linux-next as of
today), I'm getting this error building any at91 kernel:

drivers/usb/host/ohci-at91.c: In function 'usb_hcd_at91_probe':
drivers/usb/host/ohci-at91.c:190:4: error: label 'err' used but not defined
    goto err;
    ^
drivers/usb/host/ohci-at91.c: At top level:
drivers/usb/host/ohci-at91.c:206:2: warning: data definition has no type or storage class [enabled by default]
  at91_stop_hc(pdev);
  ^
...

The problem is obviously a mismerge between two unrelated changes that
resulted in missing opening braces.
Signed-off-by: NArnd Bergmann <arnd@arndb.de>
Acked-by: NBoris BREZILLON <b.brezillon@overkiz.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

1f53b485

04 1月, 2014 25 次提交

USB: oti6858: switch to generic TIOCMIWAIT implementation · bd6383c8