- 23 7月, 2007 9 次提交
-
-
由 Keith Owens 提交于
kstat_irqs(0) includes the count of interrupt 0 from all cpus, not just the current cpu. The updated interrupt 0 on other cpus can stop the nmi_watchdog from tripping, so only include the current cpu's int 0. Signed-off-by: NKeith Owens <kaos@ocs.com.au> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andi Kleen 提交于
This mainly changes the nops for alternative, so not very revolutionary. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andi Kleen 提交于
Previously this flag was only used on 32bit, but some shared code can use it now. Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andi Kleen 提交于
Fix WARNING: arch/i386/kernel/built-in.o(.text+0xdd0d): Section mismatch: reference to .init.data:cpu_llc_id (between 'set_cpu_sibling_map' and 'initialize_secondary') WARNING: arch/i386/kernel/built-in.o(.text+0xdd1b): Section mismatch: reference to .init.data:cpu_llc_id (between 'set_cpu_sibling_map' and 'initialize_secondary') Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andi Kleen 提交于
When a machine check or NMI occurs while multiple byte code is patched the CPU could theoretically see an inconsistent instruction and crash. Prevent this by temporarily disabling MCEs and returning early in the NMI handler. Based on discussion with Mathieu Desnoyers. Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andi Kleen 提交于
Reenable kprobes and alternative patching when the kernel text is write protected by DEBUG_RODATA Add a general utility function to change write protected text. The new function remaps the code using vmap to write it and takes care of CPU synchronization. It also does CLFLUSH to make icache recovery faster. There are some limitations on when the function can be used, see the comment. This is a newer version that also changes the paravirt_ops code. text_poke also supports multi byte patching now. Contains bug fixes from Zach Amsden and suggestions from Mathieu Desnoyers. Cc: Jan Beulich <jbeulich@novell.com> Cc: Jeremy Fitzhardinge <jeremy@goop.org> Cc: Mathieu Desnoyers <compudj@krystal.dyndns.org> Cc: Zach Amsden <zach@vmware.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
This patch uses the read and write functions provided at system.h for control registers instead of writting raw assembly over and over again in .c files. Functions to manipulate cr2 and cr8 were provided, as they were lacking. Also, removed some extra space after closing brackets Signed-off-by: NGlauber de Oliveira Costa <gcosta@redhat.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
This patch makes the i386 behave the same way that x86_64 does when a segfault happens. A line gets printed to the kernel log so that tools that need to check for failures can behave more uniformly between debug.show_unhandled_signals sysctl variable to 0 (or by doing echo 0 > /proc/sys/debug/exception-trace) Also, all of the lines being printed are now using printk_ratelimit() to deny the ability of DoS from a local user with a program like the following: main() { while (1) if (!fork()) *(int *)0 = 0; } This new revision also includes the fix that Andrew did which got rid of new sysctl that was added to the system in earlier versions of this. Also, 'show-unhandled-signals' sysctl has been renamed back to the old 'exception-trace' to avoid breakage of people's scripts. AK: Enabling by default for i386 will be likely controversal, but let's see what happens AK: Really folks, before complaining just fix your segfaults AK: I bet this will find a lot of silent issues Signed-off-by: NMasoud Sharbiani <masouds@google.com> Signed-off-by: NAndi Kleen <ak@suse.de> [ Personally, I've found the complaints useful on x86-64, so I'm all for this. That said, I wonder if we could do it more prettily.. -Linus ] Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Al Viro 提交于
Fix a mismerge in commit 8b6f50ef: "spufs: make signal-notification files readonly for NOSCHED contexts", where structs got duplicated. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Acked-by: NJeremy Kerr <jk@ozlabs.org> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 22 7月, 2007 31 次提交
-
-
由 Linus Torvalds 提交于
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: [NET]: Add missing entries to family name tables [NET]: Make NETDEVICES depend on NET. [IPV6]: endianness bug in ip6_tunnel [IrDA]: TOSHIBA_FIR depends on virt_to_bus [IrDA]: EP7211 IR driver port to the latest SIR API [IrDA] Typo fix in irnetlink.c copyright [NET]: Fix loopback crashes when multiqueue is enabled. [IPV4]: Fix inetpeer gcc-4.2 warnings
-
由 Linus Torvalds 提交于
* 'master' of master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6: [SPARC64]: ERROR: "sys_ioctl" [arch/sparc64/solaris/solaris.ko] undefined! [SPARC32]: Make PAGE_SHARED a read-mostly variable. [SPARC32]: Take enable_irq/disable_irq out of line. [SPARC32]: clean include/asm-sparc/irq.h [SPARC32]: Fix rounding errors in ndelay/udelay implementation.
-
由 David Howells 提交于
Add missing entries to af_family_clock_key_strings[]. Signed-off-by: NDavid Howells <dhowells@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Christoph Hellwig 提交于
From: Christoph Hellwig <hch@infradead.org> On Fri, Jul 20, 2007 at 09:24:42AM -0400, Horst H. von Brand wrote: > When building v2.6.22-3478-g275afcac on sparc64 (.config attached) I get: > > MODPOST vmlinux > Building modules, stage 2. > MODPOST 463 modules > ERROR: "sys_ioctl" [arch/sparc64/solaris/solaris.ko] undefined! Sorry, my fault. It looked to me like sparc64 exports sys_ioctl on it's own, but it only exports compat_sys_ioctl on it's own. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
same scheme as for sparc64, same rationale Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
Move stuff used only by arch/sparc/kernel/* into arch/sparc/kernel/irq.h and into individual files in there (e.g. macros internal to sun4m_irq.c, etc.) Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Mark Fortescue 提交于
__ndelay and __udelay have not been delayung >= specified time. The problem with __ndelay has been tacked down to the rounding of the multiplier constant. By changing this, delays > app 18us are correctly calculated. The problem with __udelay has also been tracked down to rounding issues. Changing the multiplier constant (to match that used in sparc64) corrects for large delays and adding in a rounding constant corrects for trunctaion errors in the claculations. Many short delays will return without looping. This is not an error as there is the fixed delay of doing all the maths to calculate the loop count. Signed-off-by: NMark Fortescue <mark@mtfhpc.demon.co.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jan Engelhardt 提交于
Enabling drivers from "Devices > Networking" (in menuconfig), for example SLIP and/or PLIP, throws link time errors when CONFIG_NET itself is =n. Have CONFIG_NETDEVICES depend on CONFIG_NET. Signed-off-by: NJan Engelhardt <jengelh@gmx.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Rothwell 提交于
Signed-off-by: NStephen Rothwell <sfr@canb.auug.org.au> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NSamuel Ortiz <samuel@sortiz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Samuel Ortiz 提交于
The EP7211 SIR driver was the only one left without a new SIR API port. Signed-off-by: NSamuel Ortiz <samuel@sortiz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Samuel Ortiz 提交于
Signed-off-by: NSamuel Ortiz <samuel@sortiz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Muli Ben-Yehuda 提交于
This patch introduces struct pci_sysdata to x86 and x86-64, and converts the existing two users (NUMA, Calgary) to use it. This lays the groundwork for having other users of sysdata, such as the PCI domains work. The Calgary bits are tested, the NUMA bits just look ok. Signed-off-by: NJeff Garzik <jeff@garzik.org> Signed-off-by: NMuli Ben-Yehuda <muli@il.ibm.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Joachim Deguara 提交于
This makes k8topology multicore aware instead of limited to signle- and dual-core CPUs. It uses the CPUID to be more future proof. Signed-off-by: NJoachim Deguara <joachim.deguara@amd.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jan Beulich 提交于
Leftovers from the removal of the more general (but abandoned) SMP alternatives. Signed-off-by: NJan Beulich <jbeulich@novell.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Robert P. J. Day 提交于
Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Stefan Richter 提交于
Dead or misnamed CONFIG_BALANCED_IRQ_DEBUG found by Robert P. J. Day. It's not a Kconfig variable. Since this debug code is ancient, I suggest to get rid of this misleading CONFIG_ macro by deleting all of this debug code. Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: "Robert P. J. Day" <rpjday@mindspring.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Aaron Durbin 提交于
Insert HPET resources after pci probing has been completed in order to avoid resource conflicts with PCI resource reservation. With this change the HPET firmware resources will be identified, but it should also not cause issues when the HPET address falls on a BAR in a PCI device, and the PCI enumeration cannot reserve the resources. Signed-off-by: NAaron Durbin <adurbin@google.com> Cc: john stultz <johnstul@us.ibm.com> Cc: Thomas Gleixner <tglx@linutronix.de> Cc: Len Brown <lenb@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Andres Salomon 提交于
This builds upon the existing geode infrastructure, but adds southbridge support, some GPIO functions, and a header file (asm-i386/geode.h) with some useful GX/LX detection tests. The majority of this code was written by Jordan Crouse. Signed-off-by: NJordan Crouse <jordan.crouse@amd.com> Signed-off-by: NAndres Salomon <dilinger@debian.org> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dan Aloni 提交于
Signed-off-by: NDan Aloni <da-x@monatomic.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Dan Aloni 提交于
Users that use kernel log filtering (e.g. via syslogd or a proprietry method) wouldn't like to see warning prints that are not really warnings. Signed-off-by: NDan Aloni <da-x@monatomic.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Jeremy Fitzhardinge 提交于
get_vm_area always returns an area with an adjacent guard page. That guard page is included in vm_struct.size. iounmap uses vm_struct.size to determine how much address space needs to have change_page_attr applied to it, which will BUG if applied to the guard page. This patch adds a helper function - get_vm_area_size() in linux/vmalloc.h - to return the actual size of a vm area, and uses it to make iounmap do the right thing. There are probably other places which should be using get_vm_area_size(). Thanks to Dave Young <hidave.darkstar@gmail.com> for debugging the problem. [ Andi, it wasn't clear to me whether x86_64 needs the same fix. ] Signed-off-by: NJeremy Fitzhardinge <jeremy@xensource.com> Cc: Dave Young <hidave.darkstar@gmail.com> Cc: Chuck Ebbert <cebbert@redhat.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Thomas Gleixner 提交于
setup_pit_timer is declared in asm-i386/timer.h. Move it to the pit header file, so it can be used by x86_64 as well. Move also the PIT constants. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: john stultz <johnstul@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Chris Wright 提交于
I fixed this in x86_64. Looks like the kind of thing that will break voyager on i386. Signed-off-by: NChris Wright <chrisw@sous-sol.org> Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Cc: john stultz <johnstul@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Thomas Gleixner 提交于
Remove the volatile in apic. We have a cpu_relax() in the wait loop. Fix a coding style issue while at it. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Cc: Ingo Molnar <mingo@elte.hu> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yinghai Lu 提交于
[akpm@linux-foundation.org: build fix] Signed-off-by: NYinghai Lu <yinghai.lu@sun.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Muli Ben-Yehuda <muli@il.ibm.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Cc: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Rientjes 提交于
When NUMA emulation succeeds, acpi_numa needs to be set to -1 so that srat_disabled() will always return true. We won't be calling acpi_scan_nodes() or registering the true nodes we've found. [hugh@veritas.com: Fix x86_64 CONFIG_NUMA_EMU build: acpi_numa needs CONFIG_ACPI_NUMA] Signed-off-by: NDavid Rientjes <rientjes@google.com> Cc: Len Brown <lenb@kernel.org> Signed-off-by: NHugh Dickins <hugh@veritas.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 David Rientjes 提交于
e820_hole_size() now uses the newly extracted helper function, e820_find_active_region(), to determine the size of usable RAM in a range of PFN's. This was previously broken because of two reasons: - The start and end PFN's of each e820 entry were not properly rounded prior to excluding those entries in the range, and - Entries smaller than a page were not properly excluded from being accumulated. This resulted in emulated nodes being incorrectly mapped to ranges that were completely reserved and not candidates for being registered as active ranges. Signed-off-by: NDavid Rientjes <rientjes@google.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Yinghai Lu 提交于
For K8 system: 4G RAM with memory hole remapping enabled, or more than 4G RAM installed. when using kexec to load second kernel. In the second kernel, when mem is allocated for GART, it will do the memset for clear, it will cause restart, because some device still used that for dma. solution will be: in second kernel: disable that at first before we try to allocate mem for it. or in the first kernel: do disable that before shutdown. Andi/Eric/Alan prefer to second one for clean shutdown in first kernel. Andi also point out need to consider to AGP enable but mem less 4G case too. Signed-off-by: NYinghai Lu <yinghai.lu@sun.com> Cc: Alan Cox <alan@lxorguk.ukuu.org.uk> Cc: "Eric W. Biederman" <ebiederm@xmission.com> Cc: Muli Ben-Yehuda <muli@il.ibm.com> Cc: Vivek Goyal <vgoyal@in.ibm.com> Cc: Dave Jones <davej@codemonkey.org.uk> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Robert P. J. Day 提交于
Signed-off-by: NRobert P. J. Day <rpjday@mindspring.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NAndi Kleen <ak@suse.de> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-