Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Reviewed-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Reviewed-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Allows callers to install their own handlers for when a GPIO line
changes state (such as for hotplug detect).

This also fixes a bug where we weren't acknowledging the GPIO IRQ
until after the bottom half had run, causing a severe IRQ storm
in some cases.
Reviewed-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Reviewed-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Reviewed-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Reviewed-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Lets start to clean up this mess!
Reviewed-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Tested-by: NXavier Chantry <chantry.xavier@gmail.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

The point is to share more code between the PFB/PGRAPH tile region
hooks, and give the hardware specific functions a chance to allocate
per-region resources.
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

nouveau_bo_move_m2mf() needs to lock the kernel channel, and it may be
called from the pushbuf IOCTL with an user channel already locked. Use
a separate subclass for the kernel channel mutex because this is
legitimate mutex nesting.
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

In a multihead setup vblank interrupts may end up enabled in both
heads. In that case we want to ignore the vblank interrupts coming
from the wrong CRTC to avoid tearing and unbalanced calls to
drm_vblank_get/put (fdo bug 31074).
Reported-by: NFelix Leimbach <felix.leimbach@gmx.net>
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

nv0x-nv4x should be mostly fine, nv50 doesn't work yet.
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

nouveau_fence_* functions are not type safe, which could lead to bugs.
Additionally every use of nouveau_fence_unref had to cast struct
nouveau_fence to void **.
Fix it by renaming old functions and creating static inline functions with
new prototypes. We still need old functions, because we pass function
pointers to ttm.
As we are wrapping functions, drop unused "void *arg" parameter where possible.
Signed-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Only supported on NV50+ so far, and disabled by default currently.  The
module parameter "msi=1" will enable it.

There's a kernel bug which will cause this to fail if the module (or the
NVIDIA binary driver) has ever been loaded before loading nouveau with
MSI enabled.  As such, this is only safe to enable if you have nouveau
load on boot, and don't wish to ever reload it.

The workaround is to "echo 0 > /sys/bus/pci/devices/<device>/enable"
until the enable count reads 0.  Then you should be able to load nouveau
with MSI enabled.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This doesn't work yet for unknown reasons.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

We previously added all the available classes for the entire generation,
even though the objects wouldn't work on the hardware.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

The structs themselves, as well as the non-sw object creation function are
probably very misnamed now.  That's a problem for later :)
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

We will eventually want to address hw engines other than PGRAPH.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

nouveau_channel_ref() takes a "weak" channel reference that doesn't
prevent the hardware channel resources from being released, it just
keeps the channel data structure alive.
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

The destroy_context() engine hooks call gpuobj management functions to
release the channel resources, these functions use HARDIRQ-unsafe locks
whereas destroy_context() is called with the HARDIRQ-safe
context_switch_lock held, that's a lock ordering violation.

Push the engine-specific channel destruction logic into destroy_context()
and let the hardware-specific code lock and unlock when it's actually
needed. Change the engine destruction order to avoid a race in the small
gap between pgraph and pfifo context uninitialization.
Reported-by: NMarcin Slusarz <marcin.slusarz@gmail.com>
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Not used at all yet, but lets hook it up now anyway.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

No other driver uses this, and userspace should be responsible for handling
locking between them if they share BOs.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This fixes a race condition between fbcon acceleration and TTM buffer
moves.  To reproduce:

- start X
- switch to vt and "while (true); do dmesg; done"
- switch to another vt and "sleep 2 && cat /path/to/debugfs/dri/0/evict_vram"
- switch back to vt running dmesg

We don't make use of this on any other channel yet, they're currently
protected by drm_global_mutex.  This will change in the near future.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

The old code generated an interrupt storm bad enough to completely
take down my system.
Signed-off-by: NAndy Lutomirski <luto@mit.edu>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

This will be needed for Z compression and to take smarter placement
decisions.
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Acked-by: NBen Skeggs <bskeggs@redhat.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Remove some unused/duplicated definitions and make sparse happy again.
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Reported-by: NChristoph Bumiller <e0425955@student.tuwien.ac.at>
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Tested-by: NMaarten Maathuis <madman2003@gmail.com>
Tested-by: NXavier Chantry <chantry.xavier@gmail.com>
Tested-by: NBen Skeggs <bskeggs@redhat.com>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Mainly to make room for inter-channel sync.
Signed-off-by: NFrancisco Jerez <currojerez@riseup.net>
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

Signed-off-by: NBen Skeggs <bskeggs@redhat.com>

On certain boards, there's BIOS scripts and memory timings that need to
be modified with the memclk.  Just pass in the entire perflvl struct and
let the chipset-specific code decide what to do.
Signed-off-by: NBen Skeggs <bskeggs@redhat.com>