The "TWI_KEYPAD" driver was renamed to "INPUT_PCF8574", so update the
defines in the board resources accordingly.
Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Remove code duplication, and only print out memory warnings when they are
an actual problem.
Signed-off-by: NRobin Getz <robin.getz@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

The current module relocation code has spotty handling wrt different
memory regions (like L1 instruction).  Rather than try to fix each
little spot, use the new common memory functions to greatly simplify
everything and make sure it is always correct.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

The current module section handling code has a lot of verbose statements
copied and pasted throughout which makes it pretty hard to digest at a
glance.  By unifying all of these up front, it is a lot easier to quickly
get an idea of what is actually going on.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Convert all printk() statements to use the common pr_xxx() funcs and use
the new pr_fmt() function to standardize all of the output.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

All kernel modules are required to be built with -mlong-calls and thus
should not generate any of these relocations.  If they do, it means the
module has not been compiled properly, so rather than trying to handle
them (and running into random run time errors) just error out on module
load to force the module to be compiled correctly.
Signed-off-by: NRobin Getz <robin.getz@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Now that we have a Blackfin memory function to figure out how to properly
access the different regions, drop the custom memory range checks in our
ptrace code and use that.  It makes the code nicer and fixes bugs where
the ptrace logic wasn't handling all the different regions.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Unify the address display to shrink the code, and add missing decoding of
a few special Blackfin-specific regions (L1 ROM and MMRs).
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NPhilippe Gerum <rpm@xenomai.org>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Cleanup is performed in two ways:

- remove extraneous updates of IPEND[4] w/ CONFIG_IPIPE,
  and document remaining use.

- substitute pop-reg-from-stack instructions with plain SP fixups in
  all save-RETI-then-discard patterns.
Signed-off-by: NPhilippe Gerum <rpm@xenomai.org>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NPhilippe Gerum <rpm@xenomai.org>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NPhilippe Gerum <rpm@xenomai.org>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NPhilippe Gerum <rpm@xenomai.org>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

The purpose of the EVT14 handler may depend on whether CONFIG_IPIPE is
enabled, albeit its implementation can be the same in both cases. When
the interrupt pipeline is enabled, EVT14 can be used to raise the core
priority level for the running code; when CONFIG_IPIPE is off, EVT14
can be used to lower this level before running softirq handlers.

Rename evt14_softirq to evt_evt14 to pick an identifier that fits
both, which allows to reuse the same vector setup code as well.
Signed-off-by: NPhilippe Gerum <rpm@xenomai.org>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

ret_from_fork is always entered with hw interrupts off, which prevents
real-time domains to preempt the Linux kernel during part of the
initial context switch to the new task, which could in turn raise the
worst-case latency figures.

To avoid this, stall the root domain stage in the interrupt pipeline
to keep the scheduling tail code free from Linux-handled IRQs, then
enable hardware interrupts again.
Signed-off-by: NPhilippe Gerum <rpm@xenomai.org>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NPhilippe Gerum <rpm@xenomai.org>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

__ipipe_{stall, unstall}_root_raw() identifiers may leave the reader
under the impression that only the virtual state is affected by these
operations, which is wrong. Pick names following the convention used
throughout the interrupt pipeline code.
Signed-off-by: NPhilippe Gerum <rpm@xenomai.org>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NPhilippe Gerum <rpm@xenomai.org>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

We handle many exceptions at EVT5 (hardware error level) so that we can
catch exceptions in our exception handling code.  Today - if the global
interrupt enable bit (IPEND[4]) is set (interrupts disabled) our trap
handling code goes into a infinite loop, since we need interrupts to be
on to defer things to EVT5.

Normal kernel code should not trigger this for any reason as IPEND[4] gets
cleared early (when doing an interrupt context save) and the kernel stack
there should be sane (or something much worse is happening in the system).
But there have been a few times where this has happened, so this change
makes sure we dump a proper crash message even when things have gone south.
Signed-off-by: NRobin Getz <robin.getz@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NBarry Song <barry.song@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NYi Li <yi.li@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

Signed-off-by: NMichael Hennerich <michael.hennerich@analog.com>
Signed-off-by: NMike Frysinger <vapier@gentoo.org>

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/driver-core-2.6:
  Driver Core: devtmpfs - kernel-maintained tmpfs-based /dev
  debugfs: Modify default debugfs directory for debugging pktcdvd.
  debugfs: Modified default dir of debugfs for debugging UHCI.
  debugfs: Change debugfs directory of IWMC3200
  debugfs: Change debuhgfs directory of trace-events-sample.h
  debugfs: Fix mount directory of debugfs by default in events.txt
  hpilo: add poll f_op
  hpilo: add interrupt handler
  hpilo: staging for interrupt handling
  driver core: platform_device_add_data(): use kmemdup()
  Driver core: Add support for compatibility classes
  uio: add generic driver for PCI 2.3 devices
  driver-core: move dma-coherent.c from kernel to driver/base
  mem_class: fix bug
  mem_class: use minor as index instead of searching the array
  driver model: constify attribute groups
  UIO: remove 'default n' from Kconfig
  Driver core: Add accessor for device platform data
  Driver core: move dev_get/set_drvdata to drivers/base/dd.c
  Driver core: add new device to bus's list before probing

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/staging-2.6: (641 commits)
  Staging: remove sxg driver
  Staging: remove heci driver
  Staging: remove at76_usb wireless driver.
  Staging: rspiusb: remove the driver
  Staging: meilhaus: remove the drivers
  Staging: remove me4000 driver.
  Staging: line6: ffzb returns an unsigned integer
  Staging: line6: pod.c: style cleanups
  Staging: iio: introduce missing kfree
  Staging: dream: introduce missing kfree
  Staging: comedi: addi-data: NULL dereference of amcc in v_pci_card_list_init()
  Staging: vt665x: fix built-in compiling
  Staging: rt3090: enable NATIVE_WPA_SUPPLICANT_SUPPORT option
  Staging: rt3090: port changes in WPA_MIX_PAIR_CIPHER to rt3090
  Staging: rt3090: rename device from raX to wlanX
  Staging: rt3090: remove possible conflict with rt2860
  Staging: rt2860/rt2870/rt3070/rt3090: fix compiler warning on x86_64
  Staging: rt2860: add new device ids
  Staging: rt3090: add device id 1462:891a
  Staging: asus_oled: Cleaned up checkpatch issues.
  ...

* git://git.kernel.org/pub/scm/linux/kernel/git/gregkh/pcmcia-2.6:
  pcmcia: document return value of pcmcia_loop_config
  pcmcia: dtl1_cs: fix pcmcia_loop_config logic
  pcmcia: drop non-existant includes
  pcmcia: disable prefetch/burst for OZ6933
  pcmcia: fix incorrect argument order to list_add_tail()
  pcmcia: drivers/pcmcia/pcmcia_resource.c: Remove unnecessary semicolons
  pcmcia: Use phys_addr_t for physical addresses
  pcmcia: drivers/pcmcia: Make static

* 'linux-next' of git://git.kernel.org/pub/scm/linux/kernel/git/jbarnes/pci-2.6: (75 commits)
  PCI hotplug: clean up acpi_run_hpp()
  PCI hotplug: acpiphp: use generic pci_configure_slot()
  PCI hotplug: shpchp: use generic pci_configure_slot()
  PCI hotplug: pciehp: use generic pci_configure_slot()
  PCI hotplug: add pci_configure_slot()
  PCI hotplug: clean up acpi_get_hp_params_from_firmware() interface
  PCI hotplug: acpiphp: don't cache hotplug_params in acpiphp_bridge
  PCI hotplug: acpiphp: remove superfluous _HPP/_HPX evaluation
  PCI: Clear saved_state after the state has been restored
  PCI PM: Return error codes from pci_pm_resume()
  PCI: use dev_printk in quirk messages
  PCI / PCIe portdrv: Fix pcie_portdrv_slot_reset()
  PCI Hotplug: convert acpi_pci_detect_ejectable() to take an acpi_handle
  PCI Hotplug: acpiphp: find bridges the easy way
  PCI: pcie portdrv: remove unused variable
  PCI / ACPI PM: Propagate wake-up enable for devices w/o ACPI support
  ACPI PM: Replace wakeup.prepared with reference counter
  PCI PM: Introduce device flag wakeup_prepared
  PCI / ACPI PM: Rework some debug messages
  PCI PM: Simplify PCI wake-up code
  ...

Fixed up conflict in arch/powerpc/kernel/pci_64.c due to OF device tree
scanning having been moved and merged for the 32- and 64-bit cases.  The
'needs_freset' initialization added in 6e19314c ("PCI/powerpc: support
PCIe fundamental reset") is now in arch/powerpc/kernel/pci_of_scan.c.

* 'for-linus' of git://git.kernel.dk/linux-2.6-block:
  block: fix linkage problem with blk_iopoll and !CONFIG_BLOCK

* 'writeback' of git://git.kernel.dk/linux-2.6-block:
  writeback: fix possible bdi writeback refcounting problem
  writeback: Fix bdi use after free in wb_work_complete()
  writeback: improve scalability of bdi writeback work queues
  writeback: remove smp_mb(), it's not needed with list_add_tail_rcu()
  writeback: use schedule_timeout_interruptible()
  writeback: add comments to bdi_work structure
  writeback: splice dirty inode entries to default bdi on bdi_destroy()
  writeback: separate starting of sync vs opportunistic writeback
  writeback: inline allocation failure handling in bdi_alloc_queue_work()
  writeback: use RCU to protect bdi_list
  writeback: only use bdi_writeback_all() for WB_SYNC_NONE writeout
  fs: Assign bdi in super_block
  writeback: make wb_writeback() take an argument structure
  writeback: merely wakeup flusher thread if work allocation fails for WB_SYNC_NONE
  writeback: get rid of wbc->for_writepages
  fs: remove bdev->bd_inode_backing_dev_info

wb_clear_pending AFAIKS should not be called after the item has been
put on the list, except by the worker threads. It could lead to the
situation where the refcount is decremented below 0 and cause lots of
problems.

Presumably the !wb_has_dirty_io case is not a common one, so it can
be discovered when the thread wakes up to check?

Also add a comment in bdi_work_clear.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

By the time bdi_work_on_stack gets evaluated again in bdi_work_free, it
can already have been deallocated and used for something else in the
!on stack case, giving a false positive in this test and causing
corruption.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

If you're going to do an atomic RMW on each list entry, there's not much
point in all the RCU complexities of the list walking. This is only going
to help the multi-thread case I guess, but it doesn't hurt to do now.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

list_add_tail_rcu contains required barriers.
Signed-off-by: NNick Piggin <npiggin@suse.de>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Gets rid of a manual set_current_state().
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

And document its retriever, get_next_work_item().
Acked-by: NJan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

We cannot safely ensure that the inodes are all gone at this point
in time, and we must not destroy this bdi with inodes having off it.
So just splice our entries to the default bdi since that one will
always persist.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

bdi_start_writeback() is currently split into two paths, one for
WB_SYNC_NONE and one for WB_SYNC_ALL. Add bdi_sync_writeback()
for WB_SYNC_ALL writeback and let bdi_start_writeback() handle
only WB_SYNC_NONE.

Push down the writeback_control allocation and only accept the
parameters that make sense for each function. This cleans up
the API considerably.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

This gets rid of work == NULL in bdi_queue_work() and puts the
OOM handling where it belongs.
Acked-by: NJan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Now that bdi_writeback_all() no longer handles integrity writeback,
it doesn't have to block anymore. This means that we can switch
bdi_list reader side protection to RCU.
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>

Data integrity writeback must use bdi_start_writeback() and ensure
that wbc->sb and wbc->bdi are set.
Acked-by: NJan Kara <jack@suse.cz>
Signed-off-by: NJens Axboe <jens.axboe@oracle.com>