This adds support for overwrite mode in the AUX area, which means "keep
collecting data till you're stopped", turning AUX area into a circular
buffer, where new data overwrites old data. It does not depend on data
buffer's overwrite mode, so that it doesn't lose sideband data that is
instrumental for processing AUX data.

Overwrite mode is enabled at mapping AUX area read only. Even though
aux_tail in the buffer's user page might be user writable, it will be
ignored in this mode.

A PERF_RECORD_AUX with PERF_AUX_FLAG_OVERWRITE set is written to the perf
data stream every time an event writes new data to the AUX area. The pmu
driver might not be able to infer the exact beginning of the new data in
each snapshot, some drivers will only provide the tail, which is
aux_offset + aux_size in the AUX record. Consumer has to be able to tell
the new data from the old one, for example, by means of time stamps if
such are provided in the trace.

Consumer is also responsible for disabling any events that might write
to the AUX area (thus potentially racing with the consumer) before
collecting the data.
Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kaixu Xia <kaixu.xia@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Robert Richter <rric@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@infradead.org
Cc: adrian.hunter@intel.com
Cc: kan.liang@intel.com
Cc: markus.t.metzger@intel.com
Cc: mathieu.poirier@linaro.org
Link: http://lkml.kernel.org/r/1421237903-181015-9-git-send-email-alexander.shishkin@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

For pmus that wish to write data to ring buffer's AUX area, provide
perf_aux_output_{begin,end}() calls to initiate/commit data writes,
similarly to perf_output_{begin,end}. These also use the same output
handle structure. Also, similarly to software counterparts, these
will direct inherited events' output to parents' ring buffers.

After the perf_aux_output_begin() returns successfully, handle->size
is set to the maximum amount of data that can be written wrt aux_tail
pointer, so that no data that the user hasn't seen will be overwritten,
therefore this should always be called before hardware writing is
enabled. On success, this will return the pointer to pmu driver's
private structure allocated for this aux area by pmu::setup_aux. Same
pointer can also be retrieved using perf_get_aux() while hardware
writing is enabled.

PMU driver should pass the actual amount of data written as a parameter
to perf_aux_output_end(). All hardware writes should be completed and
visible before this one is called.

Additionally, perf_aux_output_skip() will adjust output handle and
aux_head in case some part of the buffer has to be skipped over to
maintain hardware's alignment constraints.

Nested writers are forbidden and guards are in place to catch such
attempts.
Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kaixu Xia <kaixu.xia@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Robert Richter <rric@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@infradead.org
Cc: adrian.hunter@intel.com
Cc: kan.liang@intel.com
Cc: markus.t.metzger@intel.com
Cc: mathieu.poirier@linaro.org
Link: http://lkml.kernel.org/r/1421237903-181015-8-git-send-email-alexander.shishkin@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

When there's new data in the AUX space, output a record indicating its
offset and size and a set of flags, such as PERF_AUX_FLAG_TRUNCATED, to
mean the described data was truncated to fit in the ring buffer.
Signed-off-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com>
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@infradead.org>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kaixu Xia <kaixu.xia@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Robert Richter <rric@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: adrian.hunter@intel.com
Cc: kan.liang@intel.com
Cc: markus.t.metzger@intel.com
Cc: mathieu.poirier@linaro.org
Link: http://lkml.kernel.org/r/1421237903-181015-7-git-send-email-alexander.shishkin@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

This patch introduces "AUX space" in the perf mmap buffer, intended for
exporting high bandwidth data streams to userspace, such as instruction
flow traces.

AUX space is a ring buffer, defined by aux_{offset,size} fields in the
user_page structure, and read/write pointers aux_{head,tail}, which abide
by the same rules as data_* counterparts of the main perf buffer.

In order to allocate/mmap AUX, userspace needs to set up aux_offset to
such an offset that will be greater than data_offset+data_size and
aux_size to be the desired buffer size. Both need to be page aligned.
Then, same aux_offset and aux_size should be passed to mmap() call and
if everything adds up, you should have an AUX buffer as a result.

Pages that are mapped into this buffer also come out of user's mlock
rlimit plus perf_event_mlock_kb allowance.
Signed-off-by: NPeter Zijlstra (Intel) <peterz@infradead.org>
Acked-by: NAlexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Kaixu Xia <kaixu.xia@linaro.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Mike Galbraith <efault@gmx.de>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Robert Richter <rric@kernel.org>
Cc: Stephane Eranian <eranian@google.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: acme@infradead.org
Cc: adrian.hunter@intel.com
Cc: kan.liang@intel.com
Cc: markus.t.metzger@intel.com
Cc: mathieu.poirier@linaro.org
Link: http://lkml.kernel.org/r/1421237903-181015-3-git-send-email-alexander.shishkin@linux.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>

The arch_perf_output_copy_user() default of
__copy_from_user_inatomic() returns bytes not copied, while all other
argument functions given DEFINE_OUTPUT_COPY() return bytes copied.

Since copy_from_user_nmi() is the odd duck out by returning bytes
copied where all other *copy_{to,from}* functions return bytes not
copied, change it over and ammend DEFINE_OUTPUT_COPY() to expect bytes
not copied.

Oddly enough DEFINE_OUTPUT_COPY() already returned bytes not copied
while expecting its worker functions to return bytes copied.
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Acked-by: will.deacon@arm.com
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Link: http://lkml.kernel.org/r/20131030201622.GR16117@laptop.programming.kicks-ass.netSigned-off-by: NIngo Molnar <mingo@kernel.org>

Vince's fuzzer once again found holes. This time it spotted a leak in
the locked page accounting.

When an event had redirected output and its close() was the last
reference to the buffer we didn't have a vm context to undo accounting.

Change the code to destroy the buffer on the last munmap() and detach
all redirected events at that time. This provides us the right context
to undo the vm accounting.
Reported-and-tested-by: NVince Weaver <vincent.weaver@maine.edu>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Link: http://lkml.kernel.org/r/20130604084421.GI8923@twins.programming.kicks-ass.net
Cc: <stable@kernel.org>
Signed-off-by: NIngo Molnar <mingo@kernel.org>

Vince reported a problem found by his perf specific trinity
fuzzer.

Al noticed 2 problems with perf's mmap():

 - it has issues against fork() since we use vma->vm_mm for accounting.
 - it has an rb refcount leak on double mmap().

We fix the issues against fork() by using VM_DONTCOPY; I don't
think there's code out there that uses this; we didn't hear
about weird accounting problems/crashes. If we do need this to
work, the previously proposed VM_PINNED could make this work.

Aside from the rb reference leak spotted by Al, Vince's example
prog was indeed doing a double mmap() through the use of
perf_event_set_output().

This exposes another problem, since we now have 2 events with
one buffer, the accounting gets screwy because we account per
event. Fix this by making the buffer responsible for its own
accounting.
Reported-by: NVince Weaver <vincent.weaver@maine.edu>
Signed-off-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Link: http://lkml.kernel.org/r/20130528085548.GA12193@twins.programming.kicks-ass.netSigned-off-by: NIngo Molnar <mingo@kernel.org>

This patch fixes a flaw in perf_output_space(). In case the size
of the space needed is bigger than the actual buffer size, there
may be situations where the function would return true (i.e.,
there is space) when it should not. head > offset due to
rounding of the masking logic.

The problem can be tested by activating BTS on Intel processors.
A BTS record can be as big as 16 pages. The following command
fails:

  $ perf record -m 4 -c 1 -e branches:u my_test_program

You will get a buffer corruption with this. Perf report won't be
able to parse the perf.data.

The fix is to first check that the requested space is smaller
than the buffer size. If so, then the masking logic will work
fine. If not, then there is no chance the record can be saved
and it will be gracefully handled by upper code layers.

[ In v2, we also make the logic for the writable more explicit by
  renaming it to rb->overwrite because it tells whether or not the
  buffer can overwrite its tail (suggested by PeterZ). ]
Signed-off-by: NStephane Eranian <eranian@google.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: peterz@infradead.org
Cc: jolsa@redhat.com
Cc: fweisbec@gmail.com
Link: http://lkml.kernel.org/r/20130318133327.GA3056@quadSigned-off-by: NIngo Molnar <mingo@kernel.org>

Introducing PERF_SAMPLE_STACK_USER sample type bit to trigger the dump
of the user level stack on sample. The size of the dump is specified by
sample_stack_user value.

Being able to dump parts of the user stack, starting from the stack
pointer, will be useful to make a post mortem dwarf CFI based stack
unwinding.

Added HAVE_PERF_USER_STACK_DUMP config option to determine if the
architecture provides user stack dump on perf event samples.  This needs
access to the user stack pointer which is not unified across
architectures. Enabling this for x86 architecture.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Original-patch-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Benjamin Redelings <benjamin.redelings@nescent.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1344345647-11536-6-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Introducing perf_output_skip function to be able to skip data within the
perf ring buffer.

When writing data into perf ring buffer we first reserve needed place in
ring buffer and then copy the actual data.

There's a possibility we won't be able to fill all the reserved size
with data, so we need a way to skip the remaining bytes.

This is going to be useful when storing the user stack dump, where we
might end up with less data than we originally requested.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Benjamin Redelings <benjamin.redelings@nescent.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1344345647-11536-5-git-send-email-jolsa@redhat.comSigned-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

Adding a generic way to use __output_copy function with specific copy
function via DEFINE_PERF_OUTPUT_COPY macro.

Using this to add new __output_copy_user function, that provides output
copy from user pointers. For x86 the copy_from_user_nmi function is used
and __copy_from_user_inatomic for the rest of the architectures.

This new function will be used in user stack dump on sample, coming in
next patches.
Signed-off-by: NJiri Olsa <jolsa@redhat.com>
Cc: "Frank Ch. Eigler" <fche@redhat.com>
Cc: Arun Sharma <asharma@fb.com>
Cc: Benjamin Redelings <benjamin.redelings@nescent.org>
Cc: Corey Ashford <cjashfor@linux.vnet.ibm.com>
Cc: Cyrill Gorcunov <gorcunov@openvz.org>
Cc: Frank Ch. Eigler <fche@redhat.com>
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Masami Hiramatsu <masami.hiramatsu.pt@hitachi.com>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Tom Zanussi <tzanussi@gmail.com>
Cc: Ulrich Drepper <drepper@gmail.com>
Link: http://lkml.kernel.org/r/1344345647-11536-4-git-send-email-jolsa@redhat.comSigned-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>

A few events are interesting not only for a current task.
For example, sched_stat_* events are interesting for a task
which wakes up. For this reason, it will be good if such
events will be delivered to a target task too.

Now a target task can be set by using __perf_task().

The original idea and a draft patch belongs to Peter Zijlstra.

I need these events for profiling sleep times. sched_switch is used for
getting callchains and sched_stat_* is used for getting time periods.
These events are combined in user space, then it can be analyzed by
perf tools.
Inspired-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Paul Mackerras <paulus@samba.org>
Cc: Arnaldo Carvalho de Melo <acme@ghostprotocols.net>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Arun Sharma <asharma@fb.com>
Signed-off-by: NAndrew Vagin <avagin@openvz.org>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1342016098-213063-1-git-send-email-avagin@openvz.orgSigned-off-by: NIngo Molnar <mingo@kernel.org>

When you do:
        $ perf record -e cycles,cycles,cycles noploop 10

You expect about 10,000 samples for each event, i.e., 10s at
1000samples/sec. However, this is not what's happening. You
get much fewer samples, maybe 3700 samples/event:

$ perf report -D | tail -15
Aggregated stats:
           TOTAL events:      10998
            MMAP events:         66
            COMM events:          2
          SAMPLE events:      10930
cycles stats:
           TOTAL events:       3644
          SAMPLE events:       3644
cycles stats:
           TOTAL events:       3642
          SAMPLE events:       3642
cycles stats:
           TOTAL events:       3644
          SAMPLE events:       3644

On a Intel Nehalem or even AMD64, there are 4 counters capable
of measuring cycles, so there is plenty of space to measure those
events without multiplexing (even with the NMI watchdog active).
And even with multiplexing, we'd expect roughly the same number
of samples per event.

The root of the problem was that when the event that caused the buffer
to become full was not the first event passed on the cmdline, the user
notification would get lost. The notification was sent to the file
descriptor of the overflowed event but the perf tool was not polling
on it.  The perf tool aggregates all samples into a single buffer,
i.e., the buffer of the first event. Consequently, it assumes
notifications for any event will come via that descriptor.

The seemingly straight forward solution of moving the waitq into the
ringbuffer object doesn't work because of life-time issues. One could
perf_event_set_output() on a fd that you're also blocking on and cause
the old rb object to be freed while its waitq would still be
referenced by the blocked thread -> FAIL.

Therefore link all events to the ringbuffer and broadcast the wakeup
from the ringbuffer object to all possible events that could be waited
upon. This is rather ugly, and we're open to better solutions but it
works for now.
Reported-by: NStephane Eranian <eranian@google.com>
Finished-by: NStephane Eranian <eranian@google.com>
Reviewed-by: NStephane Eranian <eranian@google.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/20111126014731.GA7030@quadSigned-off-by: NIngo Molnar <mingo@elte.hu>

Split the callchain code from the perf events core into
a new kernel/events/callchain.c file.

This simplifies a bit the big core.c
Signed-off-by: NBorislav Petkov <borislav.petkov@amd.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
[keep ctx recursion handling inline and use internal headers]
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Link: http://lkml.kernel.org/r/1318778104-17152-1-git-send-email-fweisbec@gmail.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

The nmi parameter indicated if we could do wakeups from the current
context, if not, we would set some state and self-IPI and let the
resulting interrupt do the wakeup.

For the various event classes:

  - hardware: nmi=0; PMI is in fact an NMI or we run irq_work_run from
    the PMI-tail (ARM etc.)
  - tracepoint: nmi=0; since tracepoint could be from NMI context.
  - software: nmi=[0,1]; some, like the schedule thing cannot
    perform wakeups, and hence need 0.

As one can see, there is very little nmi=1 usage, and the down-side of
not using it is that on some platforms some software events can have a
jiffy delay in wakeup (when arch_irq_work_raise isn't implemented).

The up-side however is that we can remove the nmi parameter and save a
bunch of conditionals in fast paths.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Michael Cree <mcree@orcon.net.nz>
Cc: Will Deacon <will.deacon@arm.com>
Cc: Deng-Cheng Zhu <dengcheng.zhu@gmail.com>
Cc: Anton Blanchard <anton@samba.org>
Cc: Eric B Munson <emunson@mgebm.net>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: Paul Mundt <lethal@linux-sh.org>
Cc: David S. Miller <davem@davemloft.net>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Jason Wessel <jason.wessel@windriver.com>
Cc: Don Zickus <dzickus@redhat.com>
Link: http://lkml.kernel.org/n/tip-agjev8eu666tvknpb3iaj0fg@git.kernel.orgSigned-off-by: NIngo Molnar <mingo@elte.hu>

And create the internal perf events header.

v2: Keep an internal inlined perf_output_copy()
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Acked-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Stephane Eranian <eranian@google.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Steven Rostedt <rostedt@goodmis.org>
Link: http://lkml.kernel.org/r/1305827704-5607-1-git-send-email-fweisbec@gmail.com
[ v3: use clearer 'ring_buffer' and 'rb' naming ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>