This introduces allocation in the batch submission path that wasn't there
previously, but these are compatibility paths so we care about simplicity
more than performance.

kernel.org bug #12419.
Signed-off-by: NEric Anholt <eric@anholt.net>
Reviewed-by: NKeith Packard <keithp@keithp.com>
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Signed-off-by: NEric Anholt <eric@anholt.net>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Like the GTT pwrite path fix, this uses an optimistic path and a
fallback to get_user_pages.  Note that this means we have to stop using
vfs_write and roll it ourselves.
Signed-off-by: NEric Anholt <eric@anholt.net>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>

We've wanted this for a few consumers that touch the pages directly (such as
the following commit), which have been doing the refcounting outside of
get/put pages.
Signed-off-by: NEric Anholt <eric@anholt.net>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>

Since the pagefault path determines that the lock order we use has to be
mmap_sem -> struct_mutex, we can't allow page faults to occur while the
struct_mutex is held.  To fix this in pwrite, we first try optimistically to
see if we can copy from user without faulting.  If it fails, fall back to
using get_user_pages to pin the user's memory, and map those pages
atomically when copying it to the GPU.
Signed-off-by: NEric Anholt <eric@anholt.net>
Reviewed-by: NJesse Barnes <jbarnes@virtuousgeek.org>

This fixes incorrect detection of the second SDVO/HDMI output on G4X, and
extra boot time on pre-G4X.
Signed-off-by: NKristian Høgsberg <krh@redhat.com>
Signed-off-by: NEric Anholt <eric@anholt.net>

This improves the PLL timings according to the suggestion of the hardware
engineers.  This results in some outputs being able to sync that weren't
able to before.

This is part of fixing fd.o bug #17508.
Signed-off-by: NMa Ling <ling.ma@intel.com>
[anholt: cleaned up a couple of redundant comments]
Signed-off-by: NEric Anholt <eric@anholt.net>

The values come from the internal reference spreadsheet on PLL
timing limits for the G4X chipsets.

Part of fixing fd.o bug #17508
Signed-off-by: NMa Ling <ling.ma@intel.com>
[anholt: Cleaned up some whitespace]
Signed-off-by: NEric Anholt <eric@anholt.net>

Later spec investigation has revealed that every 9xx mobile part has
had this register in this format.  Also, no non-mobile parts have been shown
to have this register.  So make all mobile use the same code, and all
non-mobile use the hack 965 detection.
Signed-off-by: NEric Anholt <eric@anholt.net>

add __init annotations to probe routines
Signed-off-by: NMichael Schmitz <schmitz@debian.org>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>

It allows to read data from a floppy, but not to write to, and to eject the
floppy (useful on our Mac without eject button).
Signed-off-by: NLaurent Vivier <Laurent@lvivier.info>
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>

Use kzfree() instead of memset() + kfree().
Signed-off-by: NJohannes Weiner <hannes@cmpxchg.org>
Reviewed-by: NPekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: NStoyan Gaydarov <stoyboyker@gmail.com>
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The cksm function in system.h is duplicate to csum_partial in checksum.h.
Remove cksm and use csum_partial instead.
Signed-off-by: NFrank Munzert <munzert@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Trivial cleanup, list_del(); list_add{,_tail}() is equivalent
to list_move{,_tail}(). Semantic patch for coccinelle can be
found at www.cccmz.de/~snakebyte/list_move_tail.spatch
Signed-off-by: NEric Sesterhenn <snakebyte@gmx.de>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

This is a cleanup of all the messages this driver prints. It uses the
dev_message macros now.
Signed-off-by: NCarsten Otte <cotte@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The inbound and outbound handlers are nearly identical if the outbound
handler uses first_to_check as end index instead of last_move. Since both
values are identical at that point the handlers can be merged.
Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Errors from SIGA instructions are stored in the per queue qdio_error
and reported back when the queue handler is called. That opens a race
when multiple error conditions occur simultanously.

Report SIGA errors immediately in the return value of do_QDIO so the
upper layer can react and SIGA errors no longer interfere with other
errors.

Move the SIGA error handling in qeth from the outbound handler to
qeth_flush_buffers.
Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com>

If the qdio module is unloaded the tiqdio tasklet must be terminated
by tasklet_kill. Move the tasklet_kill after the unregistration of
the adapter interrupt so the tiqdio tasklet will not be scheduled
anymore before calling tasklet_kill.
Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The index value that indicated that the input queue moved was also used to
store the index of the first acknowledged buffer. For non-qebsm only the
newest buffer is acknowledged which may be different from the last move index
so two seperate values are needed to track the input queue.
Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The ACKnowledgement state should be set on the newest SBAL so an
adapter interrupt surpression check needs to scan fewer SBALs.
Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

qdio_cleanup is a wrapper function that should call qdio_shutdown and
qdio_free. qdio_free was not called if an error occured in qdio_shutdown
resulting in a missing free of allocated resources.

Call qdio_free regardless of the return value of qdio_shutdown.
Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The queue tasklets were stopped with tasklet_disable. Although tasklet_disable
prevents the tasklet from beeing executed it is still possible that a tasklet
is scheduled on a CPU at that point. A following qdio_establish calls
tasklet_init which clears the tasklet count and the tasklet state leading to
the following Oops:

    <2>kernel BUG at kernel/softirq.c:392!
    <4>illegal operation: 0001 [#1] SMP
    <4>Modules linked in: iptable_filter ip_tables x_tables dm_round_robin dm_multipath scsi_dh sg sd_mod crc_t10dif nfs lockd nfs
_acl sunrpc fuse loop dm_mod qeth_l3 ipv6 zfcp qeth scsi_transport_fc qdio scsi_tgt scsi_mod chsc_sch ccwgroup dasd_eckd_mod dasdm
od ext3 mbcache jbd
    <4>Supported: Yes
    <4>CPU: 0 Not tainted 2.6.27.13-1.1.mz13-default #1
    <4>Process blast.LzS_64 (pid: 16445, task: 000000006cc02538, ksp: 000000006cb67998)
    <4>Krnl PSW : 0704c00180000000 00000000001399f4 (tasklet_action+0xc8/0x1d4)
    <4>           R:0 T:1 IO:1 EX:1 Key:0 M:1 W:0 P:0 AS:3 CC:0 PM:0 EA:3
    <4>Krnl GPRS: ffffffff00000030 0000000000000002 0000000000000002 fffffffffffffffe
    <4>           000000000013aabe 00000000003b6a18 fffffffffffffffd 0000000000000000
    <4>           00000000006705a8 000000007d0914a8 000000007d0914b0 000000007fecfd30
    <4>           0000000000000000 00000000003b63e8 000000007fecfd90 000000007fecfd30
    <4>Krnl Code: 00000000001399e8: b9200021            cgr     %r2,%r1
    <4>           00000000001399ec: a7740004            brc     7,1399f4
    <4>           00000000001399f0: a7f40001            brc     15,1399f2
    <4>          >00000000001399f4: c0100027e8ee        larl    %r1,636bd0
    <4>           00000000001399fa: bf1f1008            icm     %r1,15,8(%r1)
    <4>           00000000001399fe: a7840019            brc     8,139a30
    <4>           0000000000139a02: c0300027e8ef        larl    %r3,636be0
    <4>           0000000000139a08: e3c030000004        lg      %r12,0(%r3)
    <4>Call Trace:
    <4>([<0000000000139c12>] tasklet_hi_action+0x112/0x1d4)
    <4> [<000000000013aabe>] __do_softirq+0xde/0x1c4
    <4> [<000000000010fa2e>] do_softirq+0x96/0xb0
    <4> [<000000000013a8d8>] irq_exit+0x70/0xcc
    <4> [<000000000010d1d8>] do_extint+0xf0/0x110
    <4> [<0000000000113b10>] ext_no_vtime+0x16/0x1a
    <4> [<000003e0000a3662>] ext3_dirty_inode+0xe6/0xe8 [ext3]
    <4>([<00000000001f6cf2>] __mark_inode_dirty+0x52/0x1d4)
    <4> [<000003e0000a44f0>] ext3_ordered_write_end+0x138/0x190 [ext3]
    <4> [<000000000018d5ec>] generic_perform_write+0x174/0x230
    <4> [<0000000000190144>] generic_file_buffered_write+0xb4/0x194
    <4> [<0000000000190864>] __generic_file_aio_write_nolock+0x418/0x454
    <4> [<0000000000190ee2>] generic_file_aio_write+0x76/0xe4
    <4> [<000003e0000a05c2>] ext3_file_write+0x3e/0xc8 [ext3]
    <4> [<00000000001cc2fe>] do_sync_write+0xd6/0x120
    <4> [<00000000001ccfc8>] vfs_write+0xac/0x184
    <4> [<00000000001cd218>] SyS_write+0x68/0xe0
    <4> [<0000000000113402>] sysc_noemu+0x10/0x16
    <4> [<0000020000043188>] 0x20000043188
    <4>Last Breaking-Event-Address:
    <4> [<00000000001399f0>] tasklet_action+0xc4/0x1d4
    <6>qdio: 0.0.c61b ZFCP on SC f67 using AI:1 QEBSM:0 PCI:1 TDD:1 SIGA: W AOP
    <4> <0>Kernel panic - not syncing: Fatal exception in interrupt

Use tasklet_kill instead of tasklet_disbale. Since tasklet_schedule must not be
called after tasklet_kill use the QDIO_IRQ_STATE_STOPPED to inidicate that a
queue is going down and prevent further tasklet schedules in that case.

Remove superflous tasklet_schedule from input queue setup, at that time
the queues are not ready so the schedule results in a NOP.
Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Remove the call to qdio_shutdown from qdio_activate since the upper-layer
drivers are responsible to call qdio_shutdown when qdio_activate returns
with an error.
Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Add a mutex to protect the tiq_list. Although reading the list is done
using RCU adding and removing elements from the list must still
happen locked since multiple qdio devices may change the list in parallel
otherwise.
Signed-off-by: NJan Glauber <jang@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Subchannel reprobing can block the kslowcrw workqueue indefinitely
while waiting for device recognition to finish which is also scheduled
to run on kslowcrw. Prevent this deadlock by moving the waiting
portion of subchannel reprobing to the cio workqueue.
Signed-off-by: NPeter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Remove unused subchannel pointer in io_subchannel_recog_done.
Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Fix incorrect check for active I/O in interrogate function.
Signed-off-by: NPeter Oberparleiter <peter.oberparleiter@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

In some situations a rc in __chsc_do_secm will be overwritten
by another one. This shouldn't do harm since todays callers
don't check for _specific_ errors but fix it for the sake of
correctness.
Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Writing only spaces to /proc/cio_ignore will cause a buffer overflow
since the size_t value i will not become negative and so buf[-1UL] is
accessed. Change the value of i to ssize_t.
Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

For a ccw group device unbinding it from its driver should do the
same as a call to ungroup, since this virtual device can not exist
without a driver.
Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Some sanity checks in the ccw group driver test the output of
container_of macros to be !NULL. Test the input parameters instead.
Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

In case the ccw group driver refuses to set a device [on|off]line,
we should transmit the return code to the caller.
Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

MAX_ISC is a valid isc number, so arrays with an index of isc
need to have a length of MAX_ISC+1
Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Since some callers rely on for_each_subchannel_staged to not fail,
fall back to brute force scanning using get_subchannel_by_schid in
case of a oom situation.
Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Add barrier to prevent compiler from reloading pointer to irq handler.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

The crw_unregister_handler uses xchg + synchronize_sched when
unregistering a crw_handler.
This doesn't protect crw_collect_info to potentially jump to NULL since
it has unlocked code like this:

if (crw_handlers[i])
        crw_handlers[i](NULL, NULL, 1);

So add a mutex which protects the crw handler array for changes.
Signed-off-by: NHeiko Carstens <heiko.carstens@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

In case the ccw driver refuses to set a device offline, we should
transmit the return code to the caller.
Signed-off-by: NSebastian Ott <sebott@linux.vnet.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>

Use ccw_device_set_notoper() (which also deletes the device
timer and disables the subchannel) instead of simply setting
the state to DEV_STATE_NOT_OPER in the generic not operational
handling code. This prevents unexpected interrupts popping up
for devices that are deemed not operational.
Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com>
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>