acerhdf uses thermal interfaces so it should depend on THERMAL.
It also should not select a thermal driver without checking that
THERMAL is enabled.

This fixes the following build errors when THERMAL=m and
ACERHDF=y.

drivers/built-in.o: In function `acerhdf_set_mode':
acerhdf.c:(.text+0x3e02e1): undefined reference to `thermal_zone_device_update'
drivers/built-in.o: In function `acerhdf_unbind':
acerhdf.c:(.text+0x3e052d): undefined reference to `thermal_zone_unbind_cooling_device'
drivers/built-in.o: In function `acerhdf_bind':
acerhdf.c:(.text+0x3e0593): undefined reference to `thermal_zone_bind_cooling_device'
drivers/built-in.o: In function `acerhdf_init':
acerhdf.c:(.init.text+0x1c2f5): undefined reference to `thermal_cooling_device_register'
acerhdf.c:(.init.text+0x1c360): undefined reference to `thermal_zone_device_register'
drivers/built-in.o: In function `acerhdf_unregister_thermal':
acerhdf.c:(.text.unlikely+0x3c67): undefined reference to `thermal_cooling_device_unregister'
acerhdf.c:(.text.unlikely+0x3c91): undefined reference to `thermal_zone_device_unregister'
Signed-off-by: NRandy Dunlap <rdunlap@infradead.org>
Acked-by: NPeter Feuerer <peter@piie.net>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

Add the documentation for the new sysfs interface of dell-laptop
that allows to configure the keyboard illumination on Dell systems.
Signed-off-by: NGabriele Mazzotta <gabriele.mzt@gmail.com>
Signed-off-by: NPali Rohár <pali.rohar@gmail.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

thinkpad-acpi:
  acpi: Remove _OSI(Linux) for ThinkPads
  thinkpad-acpi: Try to use full software mute control
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

AFAICT the only reason to set _OSI(Linux) on ThinkPads is to get
sensible mute button behavior.  Now that the thinkpad_acpi driver
can do this on is own, there is no reason to keep the ACPI
quirk.

Cc: Len Brown <len.brown@intel.com>
Cc: Jerone Young <jerone.young@canonical.com>
Signed-off-by: NAndy Lutomirski <luto@amacapital.net>
Acked-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

ThinkPads have hardware volume controls and three buttons to control
them.  (These are separate from the standard mixer.)  By default,
the buttons are:

 - Mute: Mutes the hardware volume control and, on some models,
   generates KEY_MUTE.

 - Up: Unmutes, generates KEY_VOLUMEUP, and increases volume if
   applicable.  (Newer thinkpads only have hardware mute/unmute.)

 - Down: Unmutes, generates KEY_VOLUMEDOWN, and decreases volume
   if applicable.

This behavior is unfortunate, since modern userspace will also
handle the hotkeys and change the other mixer.  If the software
mixer is muted and the hardware mixer is unmuted and you push mute,
hilarity ensues as they both switch state.

Rather than adding a lot of complex ALSA integration to fix this,
just disable the special ThinkPad volume controls when possible.
This turns the mute and volume buttons into regular buttons, and
standard software controls will work as expected.

ALSA already knows about the mute light on models with a mute light,
so everything should just work.

This should also allow us to remove _OSI(Linux) for all ThinkPads.

For future reference: It turns out that we can ask ACPI for one of
three behaviors directly on very new models.  They are "latch" (the
default), "none" (no automatic control), and "toggle" (mute unmutes
when muted).  All of the modes besides "none" seem to be a bit
buggy, though, and there doesn't seem to be a consistent way to get
any notification when the HW mute state is changed.
Signed-off-by: NAndy Lutomirski <luto@mit.edu>
Acked-by: NHenrique de Moraes Holschuh <hmh@hmh.eng.br>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

  * renamed bios_settings_t to bios_settings, as it is no typedef
  * replaced "unsigned char" by u8 in bios_settings struct for better
    readability.

Cc: platform-driver-x86@vger.kernel.org
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andreas Mohr <andi@lisas.de>
Acked-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NPeter Feuerer <peter@piie.net>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

added critical trip point which represents the temperature limit.
Added return -EINVAL in case wrong trip point is provided.

Cc: platform-driver-x86@vger.kernel.org
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andreas Mohr <andi@lisas.de>
Cc: Borislav Petkov <bp@suse.de>
Cc: Javi Merino <javi.merino@arm.com>
Signed-off-by: NPeter Feuerer <peter@piie.net>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

acerhdf has been doing an on-off fan control using hysteresis by
post-manipulating the outcome of thermal subsystem trip point handling.
This patch enables acerhdf to use the bang-bang governor, which is
intended for on-off controlled fans.

Cc: platform-driver-x86@vger.kernel.org
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
CC: Zhang Rui <rui.zhang@intel.com>
Cc: Andreas Mohr <andi@lisas.de>
Cc: Javi Merino <javi.merino@arm.com>
Acked-and-tested-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NPeter Feuerer <peter@piie.net>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

added following new models:
   * Aspire 5755G
   * AO521
   * AO751h
   * Aspire One 753
   * Extensa 5420
   * Aspire 5315
   * Aspire 5739G
   * TravelMate TM8573T

Cc: platform-driver-x86@vger.kernel.org
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andreas Mohr <andi@lisas.de>
Acked-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NPeter Feuerer <peter@piie.net>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

Some Acer models require an additional command to turn off the fan after
bios mode has been enabled.  Adding new section in bios table to allow
support for those models, by writing an extra "manual mode" register.

Cc: platform-driver-x86@vger.kernel.org
Cc: Darren Hart <dvhart@infradead.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Andreas Mohr <andi@lisas.de>
Acked-by: NBorislav Petkov <bp@suse.de>
Signed-off-by: NPeter Feuerer <peter@piie.net>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

This patch adds other ACPI ids from Windows inf driver which should be handled
by dell-smo8800 driver. ACPI devices have same structure -- one IRQ number.

This patch also updates description of module.
Signed-off-by: NPali Rohár <pali.rohar@gmail.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

This patch adds support for configuring keyboard backlight settings on supported
Dell laptops. It exports kernel leds interface and uses Dell SMBIOS tokens or
keyboard class interface.

With this patch it is possible to set:
* keyboard backlight level
* timeout after which will be backlight automatically turned off
* input activity triggers (keyboard, touchpad, mouse) which enable backlight
* ambient light settings

Settings are exported via sysfs:
/sys/class/leds/dell::kbd_backlight/

Code is based on newly released documentation by Dell in libsmbios project.

Thanks to Dan Carpenter who reported bug about unpredictable results in
quirks->kbd_timeouts for loop. His fix adds needs_kbd_timeouts flag to
quirk structure to indicate if kbd_timeouts array is empty or not.
Signed-off-by: NPali Rohár <pali.rohar@gmail.com>
Signed-off-by: NGabriele Mazzotta <gabriele.mzt@gmail.com>
Cc: Dan Carpenter <dan.carpenter@oracle.com>
Minor English corrections to comments.
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

A previous patch added support to handle more events.

This patch adds support to update the sysfs group whenever we receive
a 0x92 event, which indicates a change in the keyboard backlight mode,
removing the update group code from toshiba_kbd_bl_mode_store, as it is
no longer needed there.
Signed-off-by: NAzael Avalos <coproscefalo@gmail.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

Currently the function toshiba_acpi_notify only takes care of hotkeys,
however, the TOSXXXX devices receive more events that can be useful.

This patch changes the function to be able to handle more events,
and in the process, move all hotkey related code residing in it to
a new function called toshiba_acpi_process_hotkeys.
Signed-off-by: NAzael Avalos <coproscefalo@gmail.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

The hotkey enabling code is being used by *_setup_keyboard and also by
*_resume.

This patch creates a new function called toshiba_acpi_enable_hotkeys to
be used by these two functions to avoid duplicating code.
Signed-off-by: NAzael Avalos <coproscefalo@gmail.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

Keyboard illumination level changes are performed by the BIOS, so no
events should be reported on keypress. This is already done on systems
using the legacy keymap, do it also for systems that don't use it.
Signed-off-by: NGabriele Mazzotta <gabriele.mzt@gmail.com>

The WMI events associated to KEY_WLAN are for all the radio devices
available. Use KEY_RFKILL instead since it's more appropriate.

The state of radio devices is changed directly by the BIOS when hotkeys
are pressed, so no events should be reported.
Signed-off-by: NGabriele Mazzotta <gabriele.mzt@gmail.com>
Merged two patches modifying this one line
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

In hpwl_add() there is a unused variable err to which we assign the
result of hp_wireless_input_setup() but we don't do anything depending
on the result so print out a message that informs the user if add()
(hp_wireless_input_setup()) fails since acpi_device_probe() doesn't
print anything in this case.
Signed-off-by: NGiedrius Statkevicius <giedriuswork@gmail.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

toshiba-acpi was always missing TOS6207 ID so it did not load automatically
on some laptops (such as Portege R100). But it worked fine if loaded manually.
Commit 135740de ("toshiba_acpi: Convert to use acpi_driver") broke that
and the driver does not work even when loaded manually since then.

Add TOS6207 ID to fix it.

Tested on Toshiba Portege R100.
Signed-off-by: NOndrej Zary <linux@rainbow-software.org>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

The pci_dev_put() function tests whether its argument is NULL
and then returns immediately. Thus the test around the call
is not needed.

This issue was detected by using the Coccinelle software.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

The backlight_device_unregister() function tests whether its argument is NULL
and then returns immediately. Thus the test around the call is not needed.

This issue was detected by using the Coccinelle software.
Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net>
For msi-wmi.c:
Acked-by: NAnisse Astier <anisse@astier.eu>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

Bug 86521 uncovered that some TOS6208 devices also return
non zero values on a write call to the backlight method,
thus getting caught and bailed out by the extra check code.

This patch changes the set_lcd_brightness function to its
"original" state by just adapting it to the new function
format.
Signed-off-by: NAzael Avalos <coproscefalo@gmail.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

Wifi on this laptop does not work unless asus-nb-wmi.wapf=4 is specified on
the kerne commandline, add a quirk for this.

Cc: stable@vger.kernel.org
BugLink: https://bugs.launchpad.net/bugs/1173681Signed-off-by: NHans de Goede <hdegoede@redhat.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

HP ZBook 15 laptop needs a non-standard mapping (x_inverted).

BugLink: http://bugzilla.opensuse.org/show_bug.cgi?id=905329Signed-off-by: NDominique Leuenberger <dimstar@opensuse.org>
Cc: <stable@vger.kernel.org>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

The WMI buffer can contain multiple events. First value in buffer is
length of event followed by data of specified length. After that is next
length and next data.  When length is zero then there is no more events
in bufffer.

This patch adds support for processing all events in buffer (not only
first) and parse more event types (not only hotkey events). Because of
variable length of events sometimes BIOS fills more hotkeys (or other
values) into single WMI event. In this case this patch also processes
these multiple hotkeys (and not only first one).

Some event types are just ignored because kernel is not interested in
them (e.g. NIC Link status, battery unplug, ...).

This patch is based on DSDT table from Dell Latitude E6440. Code should
be backward compatible so will process other events of old types same as
before this patch.

This patch also fixes a problem with unknown WMI event messages being
written to the log. Now all known events are parsed and those which are
not interesting to the kernel are dropped without an unknown WMI event
message.
Signed-off-by: NPali Rohár <pali.rohar@gmail.com>
Tested-by: NPali Rohár <pali.rohar@gmail.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

eeepc_acpi_notify increases the indentation level to a whopping four. If
we revise the conditions a bit, we can reduce that to a more soothing
two and satisfy the indentation guidelines in Documentation/CodingStyle.

Remove an unwanted space while we're in the neighbourhood.
Signed-off-by: NFrans Klaver <fransklaver@gmail.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

s/tempurature/temperature/
Signed-off-by: NChen Hanxiao <chenhanxiao@cn.fujitsu.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

In eeepc_hotk_thaw, we assume that get_acpi() will effectively return a
bool. However, it is possible that get_acpi() returns an error instead.
We should not be writing error values to the ACPI device, even though
it's quite possible that we couldn't contact the ACPI device in the
first place.
Signed-off-by: NFrans Klaver <fransklaver@gmail.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

eeepc_get_fan_pwm and eeepc_set_fan_pwm convert the PWM value read from
the fan to a range lmsensors understands. Unfortunately this is only
clear if you are familiar with how lmsensors handles duty cycles.

Introduce two conversion functions that document the goal of these
conversions.
Signed-off-by: NFrans Klaver <fransklaver@gmail.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

eeepc_[gs]et_fan_ctrl uses some magic numbers. These numbers mean
something more than just the number. Describe them with macros instead
of comments in one of the functions.
Signed-off-by: NFrans Klaver <fransklaver@gmail.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

The rfkill notifier node names are used in three different places. As a
matter of style, it is better to store them somewhere and have the
compiler warn us about typos in the function arguments.
Signed-off-by: NFrans Klaver <fransklaver@gmail.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

As per Documentation/CodingStyle ch. 2, it is preferred that we don't
break user visible strings, in order to allow users to grep for them.
Signed-off-by: NFrans Klaver <fransklaver@gmail.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

In eeepc_rfkill_hotplug there's an if statement with a big tail that
ends right before the out_unlock label. We might as well invert the
condition and jump to out_unlock in that case, pretty much like the rest
of the code does. This removes an indentation level for a large chunk of
code and also stops suggesting there might be an else clause.
Signed-off-by: NFrans Klaver <fransklaver@gmail.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

Instead of using a magic constant 0x20 in some drivers to get data only
from the KBC port we should use the constant defined in i8042.h with
the same value. Also, this makes these drivers uniform with what
constant the only other filter function uses in
drivers/input/misc/ideapad_slidebar.c.
Signed-off-by: NGiedrius Statkevičius <giedriuswork@gmail.com>
Signed-off-by: NDarren Hart <dvhart@linux.intel.com>

Pull ARM SoC fixes from Olof Johansson:
 "Another small set of fixes:

   - some DT compatible typo fixes
   - irq setup fix dealing with irq storms on orion
   - i2c quirk generalization for mvebu
   - a handful of smaller fixes for OMAP
   - a couple of added file patterns for OMAP entries in MAINTAINERS"

* tag 'armsoc-for-rc5' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc:
  ARM: at91/dt: Fix sama5d3x typos
  pinctrl: dra: dt-bindings: Fix output pull up/down
  MAINTAINERS: Update entry for omap related .dts files to cover new SoCs
  MAINTAINERS: add more files under OMAP SUPPORT
  ARM: dts: AM437x-SK-EVM: Fix DCDC3 voltage
  ARM: dts: AM437x-GP-EVM: Fix DCDC3 voltage
  ARM: dts: AM43x-EPOS-EVM: Fix DCDC3 voltage
  ARM: dts: am335x-evm: Fix 5th NAND partition's name
  ARM: orion: Fix for certain sequence of request_irq can cause irq storm
  ARM: mvebu: armada xp: Generalize use of i2c quirk

Pull sparc fixes from David Miller:

 1) Fix NULL oops in Schizo PCI controller error handler.

 2) Fix race between xchg and other operations on 32-bit sparc, from
    Andreas Larsson.

 3) swab*() helpers need a dummy memory input operand to show data flow
    on 64-bit sparc.

 4) Fix RCU warnings due to missing irq_{enter,exit}() around
    generic_smp_call_function*() calls.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc:
  sparc64: Fix constraints on swab helpers.
  sparc32: Implement xchg and atomic_xchg using ATOMIC_HASH locks
  sparc64: Do irq_{enter,exit}() around generic_smp_call_function*().
  sparc64: Fix crashes in schizo_pcierr_intr_other().

Pull md bugfix from Neil Brown:
 "One fix for md for 3.18.

  This fixes a regression introduced in 3.13"

* tag 'md/3.18-fix' of git://neil.brown.name/md:
  md: Always set RECOVERY_NEEDED when clearing RECOVERY_FROZEN

Some DT files had a typo with a missing "5" in sama5d3x first compatible string.
Signed-off-by: NPeter Rosin <peda@axentia.se>
[nicolas.ferre@atmel.com: modify commit log]
Signed-off-by: NNicolas Ferre <nicolas.ferre@atmel.com>
Signed-off-by: NOlof Johansson <olof@lixom.net>

Merge tag 'omap-fixes-against-v3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap into fixes

Merge "omap fixes against v3.18-rc4" from Tony Lindgren:

Few omap fixes for hangs and wrong pinctrl defines, and update
MAINTAINERS file to avoid missing PMIC and SoC related patches:

- Fix random hangs on am437x because of incorrect default
  value for the DDR regulator

- Fix wrong partition name for NAND on am335x-evm

- Fix wrong pinctrl defines for dra7xx

- Update maintainers entries for PMICs and SoCs

* tag 'omap-fixes-against-v3.18-rc4' of git://git.kernel.org/pub/scm/linux/kernel/git/tmlind/linux-omap:
  pinctrl: dra: dt-bindings: Fix output pull up/down
  MAINTAINERS: Update entry for omap related .dts files to cover new SoCs
  MAINTAINERS: add more files under OMAP SUPPORT
  ARM: dts: AM437x-SK-EVM: Fix DCDC3 voltage
  ARM: dts: AM437x-GP-EVM: Fix DCDC3 voltage
  ARM: dts: AM43x-EPOS-EVM: Fix DCDC3 voltage
  ARM: dts: am335x-evm: Fix 5th NAND partition's name
Signed-off-by: NOlof Johansson <olof@lixom.net>