Default kernel stack size on parisc is 16k.  During tests we found that the
kernel stack can easily grow beyond 13k, which leaves 3k left for irq
processing.

This patch adds the possibility to activate an additional stack of 16k per CPU
which is being used during irq processing.  This implementation does not yet
uses this irq stack for the irq bh handler.

The assembler code for call_on_stack was heavily cleaned up by John
David Anglin.

CC: John David Anglin <dave.anglin@bell.net>
Signed-off-by: NHelge Deller <deller@gmx.de>

Add the CONFIG_DEBUG_STACKOVERFLOW config option to enable checks to
detect kernel stack overflows.

Stack overflows can not be detected reliable since we do not want to
introduce too much overhead.

Instead, during irq processing in do_cpu_irq_mask() we check kernel
stack usage of the interrupted kernel process. Kernel threads can be
easily detected by checking the value of space register 7 (sr7) which
is zero when running inside the kernel.

Since THREAD_SIZE is 16k and PAGE_SIZE is 4k, reduce the alignment of
the init thread to the lower value (PAGE_SIZE) in the kernel
vmlinux.ld.S linker script.
Signed-off-by: NHelge Deller <deller@gmx.de>

parisc: only re-enable interrupts if we need to schedule or deliver signals when returning to userspace

Helge and I have found that we have a kernel stack overflow problem
which causes a variety of random failures.
Currently, we re-enable interrupts when returning from an external
interrupt incase we need to schedule or delivery
signals.  As a result, a potentially unlimited number of interrupts
can occur while we are running on the kernel
stack.  It is very limited in space (currently, 16k).  This change
defers enabling interrupts until we have
actually decided to schedule or delivery signals.  This only occurs
when we about to return to userspace.  This
limits the number of interrupts on the kernel stack to one.  In other
cases, interrupts remain disabled until the
final return from interrupt (rfi).
Signed-off-by: NJohn David Anglin  <dave.anglin@bell.net>
Signed-off-by: NHelge Deller <deller@gmx.de>

Signed-off-by: NHelge Deller <deller@gmx.de>

The "b" branch instruction used in the fork_like macro only can handle
17-bit pc-relative offsets.
This fails with an out of range offset with some .config files.
Rewrite to use the "be" instruction which
can branch to any address in a space.
Signed-off-by: NJohn David Anglin  <dave.anglin@bell.net>
Signed-off-by: NHelge Deller <deller@gmx.de>

The ifeq operator does not accept globs, so this little bit of code will
never match (unless uname literally prints out "parsic*").  Rewrite to
use a pattern matching operator so that NATIVE is set to 1 on parisc.
Signed-off-by: NMike Frysinger <vapier@gentoo.org>
Signed-off-by: NHelge Deller <deller@gmx.de>

Include some documentation about how the parisc gateway page technically
works and how it is used from userspace.

James Bottomley is the original author of this description and it was
copied here out of an email thread from Apr 12 2013 titled:
man2 : syscall.2 : document syscall calling conventions

CC: James Bottomley <James.Bottomley@HansenPartnership.com>
Signed-off-by: NHelge Deller <deller@gmx.de>

This patch fixes partly PAGE_SIZEs of 16K or 64K by adjusting the
assembler PTE lookup code and the assembler TEMPALIAS code.  Furthermore
some data alignments for PAGE_SIZE have been limited to 4K (or less) to
not waste too much memory with greater page sizes. As a side note, the
palo loader can (currently) only handle up to 10 ELF segments which is
fixed with tighter aligning as well.

My testings indicated that the ldci command in the sba iommu coding
needed adjustment by the PAGE_SHIFT value and that the I/O PDIR Page
size was only set to 4K for my machine (C3000).

All this fixes partly the boot, but there are still quite some caching
problems left.  Examples are e.g. the symbios logic driver which is
failing:

sym0: <896> rev 0x7 at pci 0000:00:0f.0 irq 69
sym0: PA-RISC Firmware, ID 7, Fast-40, SE, parity checking
CACHE TEST FAILED: DMA error (dstat=0x81).sym0: CACHE INCORRECTLY CONFIGURED.

and the tulip network driver which doesn't seem to work correctly
either:

Sending BOOTP requests .net eth0: Setting full-duplex based on MII#1
link partner capability of 05e1
..... timed out!

Beside those kernel fixes glibc will need fixes too to be able to handle
>4K page sizes.
Signed-off-by: NHelge Deller <deller@gmx.de>

Most architectures that define CONFIG_HAVE_DMA, have implementations for
both dma_alloc_attrs() and dma_free_attrs().  All achitectures that do
not define CONFIG_HAVE_DMA also have both of these definitions provided by
dma-mapping-broken.h.

Add default implementations for these functions on parisc.
Signed-off-by: NDamian Hobson-Garcia <dhobsong@igel.co.jp>
Signed-off-by: NHelge Deller <deller@gmx.de>

Things like " \t" and whitespace at end of line. I'm leaving all the other
coding style errors here alone.
Signed-off-by: NRolf Eike Beer <eike-kernel@sf-tec.de>
Signed-off-by: NHelge Deller <deller@gmx.de>

kmap_atomic allows only one argument now, just move the second.
Signed-off-by: NZhao Hongjiang <zhaohongjiang@huawei.com>
Signed-off-by: NHelge Deller <deller@gmx.de>

Pull MFD update from Samuel Ortiz:
 "For 3.10 we have a few new MFD drivers for:

   - The ChromeOS embedded controller which provides keyboard, battery
     and power management services.  This controller is accessible
     through i2c or SPI.

   - Silicon Laboratories 476x controller, providing access to their FM
     chipset and their audio codec.

   - Realtek's RTS5249, a memory stick, MMC and SD/SDIO PCI based
     reader.

   - Nokia's Tahvo power button and watchdog device.  This device is
     very similar to Retu and is thus supported by the same code base.

   - STMicroelectronics STMPE1801, a keyboard and GPIO controller
     supported by the stmpe driver.

   - ST-Ericsson AB8540 and AB8505 power management and voltage
     converter controllers through the existing ab8500 code.

  Some other drivers got cleaned up or improved.  In particular:

   - The Linaro/STE guys got the ab8500 driver in sync with their
     internal code through a series of optimizations, fixes and
     improvements.

   - The AS3711 and OMAP USB drivers now have DT support.

   - The arizona clock and interrupt handling code got improved.

   - The wm5102 register patch and boot mechanism also got improved."

* tag 'mfd-3.10-1' of git://git.kernel.org/pub/scm/linux/kernel/git/sameo/mfd-next: (104 commits)
  mfd: si476x: Don't use 0bNNN
  mfd: vexpress: Handle pending config transactions
  mfd: ab8500: Export ab8500_gpadc_sw_hw_convert properly
  mfd: si476x: Fix i2c warning
  mfd: si476x: Add header files and Kbuild plumbing
  mfd: si476x: Add chip properties handling code
  mfd: si476x: Add the bulk of the core driver
  mfd: si476x: Add commands abstraction layer
  mfd: rtsx: Support RTS5249
  mfd: retu: Add Tahvo support
  mfd: ucb1400: Pass ucb1400-gpio data through ac97 bus
  mfd: wm8994: Add some OF properties
  mfd: wm8994: Add device ID data to WM8994 OF device IDs
  input: Export matrix_keypad_parse_of_params()
  mfd: tps65090: Add compatible string for charger subnode
  mfd: db8500-prcmu: Support platform dependant device selection
  mfd: syscon: Fix warnings when printing resource_size_t
  of: Add stub of_get_parent for non-OF builds
  mfd: omap-usb-tll: Convert to devm_ioremap_resource()
  mfd: omap-usb-host: Convert to devm_ioremap_resource()
  ...

Pull kvm updates from Gleb Natapov:
 "Highlights of the updates are:

  general:
   - new emulated device API
   - legacy device assignment is now optional
   - irqfd interface is more generic and can be shared between arches

  x86:
   - VMCS shadow support and other nested VMX improvements
   - APIC virtualization and Posted Interrupt hardware support
   - Optimize mmio spte zapping

  ppc:
    - BookE: in-kernel MPIC emulation with irqfd support
    - Book3S: in-kernel XICS emulation (incomplete)
    - Book3S: HV: migration fixes
    - BookE: more debug support preparation
    - BookE: e6500 support

  ARM:
   - reworking of Hyp idmaps

  s390:
   - ioeventfd for virtio-ccw

  And many other bug fixes, cleanups and improvements"

* tag 'kvm-3.10-1' of git://git.kernel.org/pub/scm/virt/kvm/kvm: (204 commits)
  kvm: Add compat_ioctl for device control API
  KVM: x86: Account for failing enable_irq_window for NMI window request
  KVM: PPC: Book3S: Add API for in-kernel XICS emulation
  kvm/ppc/mpic: fix missing unlock in set_base_addr()
  kvm/ppc: Hold srcu lock when calling kvm_io_bus_read/write
  kvm/ppc/mpic: remove users
  kvm/ppc/mpic: fix mmio region lists when multiple guests used
  kvm/ppc/mpic: remove default routes from documentation
  kvm: KVM_CAP_IOMMU only available with device assignment
  ARM: KVM: iterate over all CPUs for CPU compatibility check
  KVM: ARM: Fix spelling in error message
  ARM: KVM: define KVM_ARM_MAX_VCPUS unconditionally
  KVM: ARM: Fix API documentation for ONE_REG encoding
  ARM: KVM: promote vfp_host pointer to generic host cpu context
  ARM: KVM: add architecture specific hook for capabilities
  ARM: KVM: perform HYP initilization for hotplugged CPUs
  ARM: KVM: switch to a dual-step HYP init code
  ARM: KVM: rework HYP page table freeing
  ARM: KVM: enforce maximum size for identity mapped code
  ARM: KVM: move to a KVM provided HYP idmap
  ...

Give the OID registry file module information so that it doesn't taint the
kernel when compiled as a module and loaded.
Reported-by: NDros Adamson <Weston.Adamson@netapp.com>
Signed-off-by: NDavid Howells <dhowells@redhat.com>
cc: Trond Myklebust <Trond.Myklebust@netapp.com>
cc: stable@vger.kernel.org
cc: linux-nfs@vger.kernel.org
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Pull 'full dynticks' support from Ingo Molnar:
 "This tree from Frederic Weisbecker adds a new, (exciting! :-) core
  kernel feature to the timer and scheduler subsystems: 'full dynticks',
  or CONFIG_NO_HZ_FULL=y.

  This feature extends the nohz variable-size timer tick feature from
  idle to busy CPUs (running at most one task) as well, potentially
  reducing the number of timer interrupts significantly.

  This feature got motivated by real-time folks and the -rt tree, but
  the general utility and motivation of full-dynticks runs wider than
  that:

   - HPC workloads get faster: CPUs running a single task should be able
     to utilize a maximum amount of CPU power.  A periodic timer tick at
     HZ=1000 can cause a constant overhead of up to 1.0%.  This feature
     removes that overhead - and speeds up the system by 0.5%-1.0% on
     typical distro configs even on modern systems.

   - Real-time workload latency reduction: CPUs running critical tasks
     should experience as little jitter as possible.  The last remaining
     source of kernel-related jitter was the periodic timer tick.

   - A single task executing on a CPU is a pretty common situation,
     especially with an increasing number of cores/CPUs, so this feature
     helps desktop and mobile workloads as well.

  The cost of the feature is mainly related to increased timer
  reprogramming overhead when a CPU switches its tick period, and thus
  slightly longer to-idle and from-idle latency.

  Configuration-wise a third mode of operation is added to the existing
  two NOHZ kconfig modes:

   - CONFIG_HZ_PERIODIC: [formerly !CONFIG_NO_HZ], now explicitly named
     as a config option.  This is the traditional Linux periodic tick
     design: there's a HZ tick going on all the time, regardless of
     whether a CPU is idle or not.

   - CONFIG_NO_HZ_IDLE: [formerly CONFIG_NO_HZ=y], this turns off the
     periodic tick when a CPU enters idle mode.

   - CONFIG_NO_HZ_FULL: this new mode, in addition to turning off the
     tick when a CPU is idle, also slows the tick down to 1 Hz (one
     timer interrupt per second) when only a single task is running on a
     CPU.

  The .config behavior is compatible: existing !CONFIG_NO_HZ and
  CONFIG_NO_HZ=y settings get translated to the new values, without the
  user having to configure anything.  CONFIG_NO_HZ_FULL is turned off by
  default.

  This feature is based on a lot of infrastructure work that has been
  steadily going upstream in the last 2-3 cycles: related RCU support
  and non-periodic cputime support in particular is upstream already.

  This tree adds the final pieces and activates the feature.  The pull
  request is marked RFC because:

   - it's marked 64-bit only at the moment - the 32-bit support patch is
     small but did not get ready in time.

   - it has a number of fresh commits that came in after the merge
     window.  The overwhelming majority of commits are from before the
     merge window, but still some aspects of the tree are fresh and so I
     marked it RFC.

   - it's a pretty wide-reaching feature with lots of effects - and
     while the components have been in testing for some time, the full
     combination is still not very widely used.  That it's default-off
     should reduce its regression abilities and obviously there are no
     known regressions with CONFIG_NO_HZ_FULL=y enabled either.

   - the feature is not completely idempotent: there is no 100%
     equivalent replacement for a periodic scheduler/timer tick.  In
     particular there's ongoing work to map out and reduce its effects
     on scheduler load-balancing and statistics.  This should not impact
     correctness though, there are no known regressions related to this
     feature at this point.

   - it's a pretty ambitious feature that with time will likely be
     enabled by most Linux distros, and we'd like you to make input on
     its design/implementation, if you dislike some aspect we missed.
     Without flaming us to crisp! :-)

  Future plans:

   - there's ongoing work to reduce 1Hz to 0Hz, to essentially shut off
     the periodic tick altogether when there's a single busy task on a
     CPU.  We'd first like 1 Hz to be exposed more widely before we go
     for the 0 Hz target though.

   - once we reach 0 Hz we can remove the periodic tick assumption from
     nr_running>=2 as well, by essentially interrupting busy tasks only
     as frequently as the sched_latency constraints require us to do -
     once every 4-40 msecs, depending on nr_running.

  I am personally leaning towards biting the bullet and doing this in
  v3.10, like the -rt tree this effort has been going on for too long -
  but the final word is up to you as usual.

  More technical details can be found in Documentation/timers/NO_HZ.txt"

* 'timers-nohz-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip: (39 commits)
  sched: Keep at least 1 tick per second for active dynticks tasks
  rcu: Fix full dynticks' dependency on wide RCU nocb mode
  nohz: Protect smp_processor_id() in tick_nohz_task_switch()
  nohz_full: Add documentation.
  cputime_nsecs: use math64.h for nsec resolution conversion helpers
  nohz: Select VIRT_CPU_ACCOUNTING_GEN from full dynticks config
  nohz: Reduce overhead under high-freq idling patterns
  nohz: Remove full dynticks' superfluous dependency on RCU tree
  nohz: Fix unavailable tick_stop tracepoint in dynticks idle
  nohz: Add basic tracing
  nohz: Select wide RCU nocb for full dynticks
  nohz: Disable the tick when irq resume in full dynticks CPU
  nohz: Re-evaluate the tick for the new task after a context switch
  nohz: Prepare to stop the tick on irq exit
  nohz: Implement full dynticks kick
  nohz: Re-evaluate the tick from the scheduler IPI
  sched: New helper to prevent from stopping the tick in full dynticks
  sched: Kick full dynticks CPU that have more than one task enqueued.
  perf: New helper to prevent full dynticks CPUs from stopping tick
  perf: Kick full dynticks CPU if events rotation is needed
  ...

Pull perf fixes from Ingo Molnar:
 "Misc fixes plus a small hw-enablement patch for Intel IB model 58
  uncore events"

* 'perf-urgent-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tip/tip:
  perf/x86/intel/lbr: Demand proper privileges for PERF_SAMPLE_BRANCH_KERNEL
  perf/x86/intel/lbr: Fix LBR filter
  perf/x86: Blacklist all MEM_*_RETIRED events for Ivy Bridge
  perf: Fix vmalloc ring buffer pages handling
  perf/x86/intel: Fix unintended variable name reuse
  perf/x86/intel: Add support for IvyBridge model 58 Uncore
  perf/x86/intel: Fix typo in perf_event_intel_uncore.c
  x86: Eliminate irq_mis_count counted in arch_irq_stat

Pull mudule updates from Rusty Russell:
 "We get rid of the general module prefix confusion with a binary config
  option, fix a remove/insert race which Never Happens, and (my
  favorite) handle the case when we have too many modules for a single
  commandline.  Seriously, the kernel is full, please go away!"

* tag 'modules-next-for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/rusty/linux:
  modpost: fix unwanted VMLINUX_SYMBOL_STR expansion
  X.509: Support parse long form of length octets in Authority Key Identifier
  module: don't unlink the module until we've removed all exposure.
  kernel: kallsyms: memory override issue, need check destination buffer length
  MODSIGN: do not send garbage to stderr when enabling modules signature
  modpost: handle huge numbers of modules.
  modpost: add -T option to read module names from file/stdin.
  modpost: minor cleanup.
  genksyms: pass symbol-prefix instead of arch
  module: fix symbol versioning with symbol prefixes
  CONFIG_SYMBOL_PREFIX: cleanup.

Pull single_open() leak fixes from Al Viro:
 "A bunch of fixes for a moderately common class of bugs: file with
  single_open() done by its ->open() and seq_release as its ->release().

  That leaks; fortunately, it's not _too_ common (either people manage
  to RTFM that says "When using single_open(), the programmer should use
  single_release() instead of seq_release() in the file_operations
  structure to avoid a memory leak", or they just copy a correct
  instance), but grepping through the tree has caught quite a pile.

  All of that is, AFAICS, -stable fodder, for as far as the patches
  apply.  I tried to carve it up into reasonably-sized pieces (more or
  less "comes from the same tree")"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  rcutrace: single_open() leaks
  gadget: single_open() leaks
  staging: single_open() leaks
  megaraid: single_open() leak
  wireless: single_open() leaks
  input: single_open() leak
  rtc: single_open() leaks
  ds1620: single_open() leak
  sh: single_open() leaks
  parisc: single_open() leaks
  mips: single_open() leaks
  ia64: single_open() leaks
  h8300: single_open() leaks
  cris: single_open() leaks
  arm: single_open() leaks

Merge ipc fixes and cleanups from my IPC branch.

The ipc locking has always been pretty ugly, and the scalability fixes
to some degree made it even less readable.  We had two cases of double
unlocks in error paths due to this (one rcu read unlock, one semaphore
unlock), and this fixes the bugs I found while trying to clean things up
a bit so that we are less likely to have more.

* ipc-cleanups:
  ipc: simplify rcu_read_lock() in semctl_nolock()
  ipc: simplify semtimedop/semctl_main() common error path handling
  ipc: move sem_obtain_lock() rcu locking into the only caller
  ipc: fix double sem unlock in semctl error path
  ipc: move the rcu_read_lock() from sem_lock_and_putref() into callers
  ipc: sem_putref() does not need the semaphore lock any more
  ipc: move rcu_read_unlock() out of sem_unlock() and into callers

This API shouldn't have 32/64-bit issues, but VFS assumes it does
unless told otherwise.
Signed-off-by: NScott Wood <scottwood@freescale.com>
Signed-off-by: NGleb Natapov <gleb@redhat.com>

We should always have proper privileges when requesting kernel
data.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: <stable@kernel.org>
Cc: Andi Kleen <ak@linux.intel.com>
Cc: eranian@google.com
Link: http://lkml.kernel.org/r/20130503121256.230745028@chello.nl
[ Fix build error reported by fengguang.wu@intel.com, propagate error code back. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>
Link: http://lkml.kernel.org/n/tip-v0x9ky3ahzr6nm3c6ilwrili@git.kernel.org

Cc: stable@vger.kernel.org
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Cc: stable@vger.kernel.org
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Cc: stable@vger.kernel.org
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Cc: stable@vger.kernel.org
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Cc: stable@vger.kernel.org
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Cc: stable@vger.kernel.org
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Cc: stable@vger.kernel.org
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Cc: stable@vger.kernel.org
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Cc: vger.kernel.org
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Cc: stable@vger.kernel.org
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Cc: stable@vger.kernel.org
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Cc: stable@vger.kernel.org
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Cc: stable@vger.kernel.org
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Cc: stable@vger.kernel.org
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Cc: stable@vger.kernel.org
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Pull networking fixes from David Miller:

 1) Several routines do not use netdev_features_t to hold such bitmasks,
    fixes from Patrick McHardy and Bjørn Mork.

 2) Update cpsw IRQ software state and the actual HW irq enabling in the
    correct order.  From Mugunthan V N.

 3) When sending tipc packets to multiple bearers, we have to make
    copies of the SKB rather than just giving the original SKB directly.
    Fix from Gerlando Falauto.

 4) Fix race with bridging topology change timer, from Stephen
    Hemminger.

 5) Fix TCPv6 segmentation handling in GRE and VXLAN, from Pravin B
    Shelar.

 6) Endian bug in USB pegasus driver, from Dan Carpenter.

 7) Fix crashes on MTU reduction in USB asix driver, from Holger
    Eitzenberger.

 8) Don't allow the kernel to BUG() just because the user puts some crap
    in an AF_PACKET mmap() ring descriptor.  Fix from Daniel Borkmann.

 9) Don't use variable sized arrays on the stack in xen-netback, from
    Wei Liu.

10) Fix stats reporting and an unbalanced napi_disable() in be2net
    driver.  From Somnath Kotur and Ajit Khaparde.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/net: (25 commits)
  cxgb4: fix error recovery when t4_fw_hello returns a positive value
  sky2: Fix crash on receiving VLAN frames
  packet: tpacket_v3: do not trigger bug() on wrong header status
  asix: fix BUG in receive path when lowering MTU
  net: qmi_wwan: Add Telewell TW-LTE 4G
  usbnet: pegasus: endian bug in write_mii_word()
  vxlan: Fix TCPv6 segmentation.
  gre: Fix GREv4 TCPv6 segmentation.
  bridge: fix race with topology change timer
  tipc: pskb_copy() buffers when sending on more than one bearer
  tipc: tipc_bcbearer_send(): simplify bearer selection
  tipc: cosmetic: clean up comments and break a long line
  drivers: net: cpsw: irq not disabled in cpsw isr in particular sequence
  xen-netback: better names for thresholds
  xen-netback: avoid allocating variable size array on stack
  xen-netback: remove redundent parameter in netbk_count_requests
  be2net: Fix to fail probe if MSI-X enable fails for a VF
  be2net: avoid napi_disable() when it has not been enabled
  be2net: Fix firmware download for Lancer
  be2net: Fix to receive Multicast Packets when Promiscuous mode is enabled on certain devices
  ...

Pull sparc updates from David Miller:

 1) Hibernation support, as well as removal of excess interrupt
    twiddling in MMU context allocation on sparc64 from Kirill Tkhai.

 2) Kill references to __ARCH_WANT_UNLOCKED_CTXSW.

 3) Sparc32 LEON bug fixes from Daniel Hellstrom and Andreas Larsson.

 4) Provide cmpxchg64(), from Geert Uytterhoeven.

 5) Device refcount and registry bug fixes from Federico Vaga and Wei
    Yongjun.

* git://git.kernel.org/pub/scm/linux/kernel/git/davem/sparc-next:
  serial: sunsu: add missing platform_driver_unregister() when module exit
  sparc32, leon: Do not overwrite previously set irq flow handlers
  sparc/kernel/vio.c: add put_device() after device_find_child()
  sparc64: Do not save/restore interrupts in get_new_mmu_context()
  sparc: Consistently use 'wr' and 'rd' instructions for ASRs.
  sparc64: Kill __ARCH_WANT_UNLOCKED_CTXSW
  sparc64: Provide cmpxchg64()
  sparc64: Do not change num_physpages during initmem freeing
  sparc64: Hibernation support
  sparc,leon: updated GRPCI2 config name
  sparc,leon: support for GRPCI1 PCI host bridge controller
  sparc32,leon: add support for PCI busn resource for GRPCI2

Merge sparc bug fixes that didn't make it into v3.9 into
sparc-next.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We have registered platform driver when module init, and
need unregister it when module exit.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>