Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 15 5月, 2010 1 次提交
  3. 13 5月, 2010 1 次提交
    • C
      x86, perf: P4 PMU -- use hash for p4_get_escr_idx() · 72001990
      由 Cyrill Gorcunov 提交于 
      Linear search over all p4 MSRs should be fine if only
we would not use it in events scheduling routine which
is pretty time critical. Lets use hashes. It should speed
scheduling up significantly.

v2: Steven proposed to use more gentle approach than issue
    BUG on error, so we use WARN_ONCE now
Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Lin Ming <ming.m.lin@intel.com>
LKML-Reference: <20100512174242.GA5190@lenovo>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      72001990
  5. 08 5月, 2010 4 次提交
    • C
      x86, perf: P4 PMU -- check for proper event index in RAW events · c7993165
      由 Cyrill Gorcunov 提交于 
      RAW events are special and we should be ready for user passing
in insane event index values.
Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Lin Ming <ming.m.lin@intel.com>
LKML-Reference: <20100508112717.315897547@openvz.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      c7993165
    • C
      x86, perf: P4 PMU -- Get rid of redundant check for array index · 3f51b711
      由 Cyrill Gorcunov 提交于 
      The caller already has done such a check.
And it was wrong anyway, it had to be '>=' rather than '>'
Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Lin Ming <ming.m.lin@intel.com>
LKML-Reference: <20100508112717.130386882@openvz.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      3f51b711
    • C
      x86, perf: P4 PMU -- protect sensible procedures from preemption · 137351e0
      由 Cyrill Gorcunov 提交于 
      Steven reported:

|
| I'm getting:
|
| Pid: 3477, comm: perf Not tainted 2.6.34-rc6 #2727
| Call Trace:
|  [<ffffffff811c7565>] debug_smp_processor_id+0xd5/0xf0
|  [<ffffffff81019874>] p4_hw_config+0x2b/0x15c
|  [<ffffffff8107acbc>] ? trace_hardirqs_on_caller+0x12b/0x14f
|  [<ffffffff81019143>] hw_perf_event_init+0x468/0x7be
|  [<ffffffff810782fd>] ? debug_mutex_init+0x31/0x3c
|  [<ffffffff810c68b2>] T.850+0x273/0x42e
|  [<ffffffff810c6cab>] sys_perf_event_open+0x23e/0x3f1
|  [<ffffffff81009e6a>] ? sysret_check+0x2e/0x69
|  [<ffffffff81009e32>] system_call_fastpath+0x16/0x1b
|
| When running perf record in latest tip/perf/core
|

Due to the fact that p4 counters are shared between HT threads
we synthetically divide the whole set of counters into two
non-intersected subsets. And while we're "borrowing" counters
from these subsets we should not be preempted (well, strictly
speaking in p4_hw_config we just pre-set reference to the
subset which allow to save some cycles in schedule routine
if it happens on the same cpu). So use get_cpu/put_cpu pair.

Also p4_pmu_schedule_events should use smp_processor_id rather
than raw_ version. This allow us to catch up preemption issue
(if there will ever be).
Reported-by: NSteven Rostedt <rostedt@goodmis.org>
Tested-by: NSteven Rostedt <rostedt@goodmis.org>
Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Lin Ming <ming.m.lin@intel.com>
LKML-Reference: <20100508112716.963478928@openvz.org>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      137351e0
    • C
      x86, perf: P4 PMU -- configure predefined events · de902d96
      由 Cyrill Gorcunov 提交于 
      If an event is not RAW we should not exit p4_hw_config
early but call x86_setup_perfctr as well.
Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Lin Ming <ming.m.lin@intel.com>
Cc: Robert Richter <robert.richter@amd.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      de902d96
  7. 07 5月, 2010 1 次提交
  9. 03 4月, 2010 3 次提交
  11. 26 3月, 2010 2 次提交
    • P
      perf, x86: Add Nehelem PMU programming errata workaround · 11164cd4
      由 Peter Zijlstra 提交于 
      Implement the workaround for Intel Errata AAK100 and AAP53.

Also, remove the Core-i7 name for Nehalem events since there are
also Westmere based i7 chips.
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Stephane Eranian <eranian@google.com>
LKML-Reference: <1269608924.12097.147.camel@laptop>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      11164cd4
    • C
      x86, perf: Add raw events support for the P4 PMU · d814f301
      由 Cyrill Gorcunov 提交于 
      The adding of raw event support lead to complete code
refactoring. I hope is became more readable then it was.

The list of changes:

1)  The 64bit config field is enough to hold all information we need
    to track event details. To achieve it we used *own* enum for
    events selection in ESCR register and map this key into proper
    value at moment of event enabling.

    For the same reason we use 12LSB bits in CCCR register -- to track
    which exactly cache trace event was requested. And we cear this bits
    at real 'write' moment.

2)  There is no per-cpu area reserved for P4 PMU anymore. We
    don't need it. All is held by config.

3)  Now we may use any available counter, ie we try to grab any
    possible counter.

v2:
  - Lin Ming reported the lack of ESCR selector in CCCR for cache events

v3:
  - Don't loose cache event codes at config unpacking procedure, we may
    need it one day so no obscure hack behind our back, better to clear
    reserved bits explicitly when needed (thanks Ming for pointing out)

  - Lin Ming fixed misplaced opcodes in cache events
Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org>
Tested-by: NLin Ming <ming.m.lin@intel.com>
Signed-off-by: NLin Ming <ming.m.lin@intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
Cc: Cyrill Gorcunov <gorcunov@gmail.com>
Cc: Peter Zijlstra <peterz@infradead.org>
LKML-Reference: <1269403766.3409.6.camel@minggr.sh.intel.com>
[ v4: did a few whitespace fixlets ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      d814f301
  13. 19 3月, 2010 4 次提交
  15. 15 3月, 2010 1 次提交
  17. 13 3月, 2010 1 次提交
  19. 12 3月, 2010 1 次提交
    • C
      perf, x86: Implement initial P4 PMU driver · a072738e
      由 Cyrill Gorcunov 提交于 
      The netburst PMU is way different from the "architectural
perfomance monitoring" specification that current CPUs use.
P4 uses a tuple of ESCR+CCCR+COUNTER MSR registers to handle
perfomance monitoring events.

A few implementational details:

1) We need a separate x86_pmu::hw_config helper in struct
   x86_pmu since register bit-fields are quite different from P6,
   Core and later cpu series.

2) For the same reason is a x86_pmu::schedule_events helper
   introduced.

3) hw_perf_event::config consists of packed ESCR+CCCR values.
   It's allowed since in reality both registers only use a half
   of their size. Of course before making a real write into a
   particular MSR we need to unpack the value and extend it to
   a proper size.

4) The tuple of packed ESCR+CCCR in hw_perf_event::config
   doesn't describe the memory address of ESCR MSR register
   so that we need to keep a mapping between these tuples
   used and available ESCR (various P4 events may use same
   ESCRs but not simultaneously), for this sake every active
   event has a per-cpu map of hw_perf_event::idx <--> ESCR
   addresses.

5) Since hw_perf_event::idx is an offset to counter/control register
   we need to lift X86_PMC_MAX_GENERIC up, otherwise kernel
   strips it down to 8 registers and event armed may never be turned
   off (ie the bit in active_mask is set but the loop never reaches
   this index to check), thanks to Peter Zijlstra

Restrictions:

 - No cascaded counters support (do we ever need them?)
 - No dependent events support (so PERF_COUNT_HW_INSTRUCTIONS
   doesn't work for now)
 - There are events with same counters which can't work simultaneously
   (need to use intersected ones due to broken counter 1)
 - No PERF_COUNT_HW_CACHE_ events yet

Todo:

 - Implement dependent events
 - Need proper hashing for event opcodes (no linear search, good for
   debugging stage but not in real loads)
 - Some events counted during a clock cycle -- need to set threshold
   for them and count every clock cycle just to get summary statistics
   (ie to behave the same way as other PMUs do)
 - Need to swicth to use event_constraints
 - To support RAW events we need to encode a global list of P4 events
   into p4_templates
 - Cache events need to be added

Event support status matrix:

 Event			status
 -----------------------------
 cycles			works
 cache-references	works
 cache-misses		works
 branch-misses		works
 bus-cycles		partially (does not work on 64bit cpu with HT enabled)
 instruction		doesnt work (needs dependent event [mop tagging])
 branches		doesnt work
Signed-off-by: NCyrill Gorcunov <gorcunov@openvz.org>
Signed-off-by: NLin Ming <ming.m.lin@intel.com>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Stephane Eranian <eranian@google.com>
Cc: Robert Richter <robert.richter@amd.com>
Cc: Frederic Weisbecker <fweisbec@gmail.com>
LKML-Reference: <20100311165439.GB5129@lenovo>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      a072738e