Add a stub for prepend_timestamp() when CONFIG_PRINTK is not
enabled.  Fixes this build error:

kernel/printk.c:1770:3: error: implicit declaration of function 'prepend_timestamp'

Cc: Kay Sievers <kay@vrfy.org>
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

For bare minimal system.
Signed-off-by: NHiroshi DOYU <hdoyu@nvidia.com>
Acked-by: NStephen Warren <swarren@wwwdotorg.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

For bare minimal system.
Signed-off-by: NHiroshi DOYU <hdoyu@nvidia.com>
Acked-by: NStephen Warren <swarren@wwwdotorg.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Accessing interleaved MC register offsets/ranges are verified. BUG*()s
in accessors can be removed.
Signed-off-by: NHiroshi DOYU <hdoyu@nvidia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Accessing interleaved MC register offsets/ranges are verified. BUG*()s
in accessors can be removed.
Signed-off-by: NHiroshi DOYU <hdoyu@nvidia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

__log_buf must be aligned, because a 64-bit value is written directly
to it as part of struct log. Alignment of the log entries is typically
handled by log_store(), but this only triggers for subsequent entries,
not the very first (or wrapped) entries.

Cc: Kay Sievers <kay@vrfy.org>
Signed-off-by: NStephen Warren <swarren@nvidia.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Tegra Memory Controller(MC) driver for Tegra30
Added to support MC General interrupts, mainly for IOMMU(SMMU).
Signed-off-by: NHiroshi DOYU <hdoyu@nvidia.com>
Acked-by: NStephen Warren <swarren@wwwdotorg.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Tegra Memory Controller(MC) driver for Tegra20
Added to support MC General interrupts, mainly for IOMMU(GART).
Signed-off-by: NHiroshi DOYU <hdoyu@nvidia.com>
Acked-by: NStephen Warren <swarren@wwwdotorg.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

The output of the timestamps got lost with the conversion of the
kmsg buffer to records; restore the old behavior.

Document, that CONFIG_PRINTK_TIME now only controls the output of
the timestamps in the syslog() system call and on the console, and
not the recording of the timestamps.

Cc: Joe Perches <joe@perches.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Sasha Levin <levinsasha928@gmail.com>
Cc: Ingo Molnar <mingo@kernel.org>
Reported-by: NYinghai Lu <yinghai@kernel.org>
Signed-off-by: NKay Sievers <kay@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This prevents the merging of printk() continuation lines of different
threads, in the case they race against each other.

It should properly isolate "atomic" single-line printk() users from
continuation users, to make sure the single-line users will never be
merged with the racy continuation ones.

Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Ingo Molnar <mingo@kernel.org>
Cc: Jonathan Corbet <corbet@lwn.net>
Cc: Sasha Levin <levinsasha928@gmail.com>
Signed-off-by: NKay Sievers <kay@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Reported-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NKay Sievers <kay@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch remove old max8997-muic drvier because of newly Extcon framework.
Extcon framework manages the external connector, so add extcon-max8997 driver
by using Extcon interface to support MUIC feature of Maxim 8997 PMIC instead
of max8997-muic driver(drivers/misc/max8997-muic.c).
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NMyungjoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This patch add extcon-max8997 driver to support the muic feature
of Maxim max8997 by using Extcon framework.

The extcon-max8997 driver is implemented based on 'drivers/misc/
max8997-muic.c' and then use Extcon interface instead of callback
function in struct max8997_muic_platform_data to notify cable state
of notifee which want to know always newly cable state when external
connector(e.g., USB, TA, JIG) is attached or detached.

v1
- Use Extcon interface to notify cable state of notifee instead of
 callback function when external connector is attached or detached.
- Bug fix of getting platform_data for irq_base value.
Signed-off-by: NChanwoo Choi <cw00.choi@samsung.com>
Signed-off-by: NMyungjoo Ham <myungjoo.ham@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NKay Sievers <kay@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NKay Sievers <kay@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Cc: Len Brown <lenb@kernel.org>
Signed-off-by: NKay Sievers <kay@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

On Tue, May 8, 2012 at 10:48 AM, Sasha Levin <levinsasha928@gmail.com> wrote:
> Before:
> [   10.110626] parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE]
>
> After:
> parport0: PC-style at 0x378
> , irq 7
>  [
> PCSPP
> ,TRISTATE
> ]
Reported-By: NSasha Levin <levinsasha928@gmail.com>
Signed-off-by: NKay Sievers <kay@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

On Tue, May 8, 2012 at 10:02 AM, Stephen Rothwell <sfr@canb.auug.org.au> wrote:
> kernel/built-in.o: In function `devkmsg_read':
> printk.c:(.text+0x27e8): undefined reference to `__udivdi3'
> Most probably the "msg->ts_nsec / 1000" since
> ts_nsec is a u64 and this is a 32 bit build ...
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NKay Sievers <kay@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This is a patch for correcting a mistake sentence in the file
Documentation/zh_CN/magic-number.txt.
signed-off-by: NHarry Wei <harryxiyou@gmail.com>
Reported-by: NZhang Shuanglong <zhangsl16@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Extends dev_printk() to attach a dictionary with a device identifier
and the driver core subsystem name to logged messages, which makes
dev_prink() reliable machine-readable. In addition to the printed
plain text message, it creates these properties:
    SUBSYSTEM=     - the driver-core subsytem name
    DEVICE=
      b12:8        - block dev_t
      c127:3       - char dev_t
      n8           - netdev ifindex
      +sound:card0 - subsystem:devname
Tested-by: NWilliam Douglas <william.douglas@intel.com>
Signed-off-by: NKay Sievers <kay@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Support for multiple concurrent readers of /dev/kmsg, with read(),
seek(), poll() support. Output of message sequence numbers, to allow
userspace log consumers to reliably reconnect and reconstruct their
state at any given time. After open("/dev/kmsg"), read() always
returns *all* buffered records. If only future messages should be
read, SEEK_END can be used. In case records get overwritten while
/dev/kmsg is held open, or records get faster overwritten than they
are read, the next read() will return -EPIPE and the current reading
position gets updated to the next available record. The passed
sequence numbers allow the log consumer to calculate the amount of
lost messages.

  [root@mop ~]# cat /dev/kmsg
  5,0,0;Linux version 3.4.0-rc1+ (kay@mop) (gcc version 4.7.0 20120315 ...
  6,159,423091;ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-ff])
  7,160,424069;pci_root PNP0A03:00: host bridge window [io  0x0000-0x0cf7] (ignored)
   SUBSYSTEM=acpi
   DEVICE=+acpi:PNP0A03:00
  6,339,5140900;NET: Registered protocol family 10
  30,340,5690716;udevd[80]: starting version 181
  6,341,6081421;FDC 0 is a S82078B
  6,345,6154686;microcode: CPU0 sig=0x623, pf=0x0, revision=0x0
  7,346,6156968;sr 1:0:0:0: Attached scsi CD-ROM sr0
   SUBSYSTEM=scsi
   DEVICE=+scsi:1:0:0:0
  6,347,6289375;microcode: CPU1 sig=0x623, pf=0x0, revision=0x0

Cc: Karel Zak <kzak@redhat.com>
Tested-by: NWilliam Douglas <william.douglas@intel.com>
Signed-off-by: NKay Sievers <kay@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

- Record-based stream instead of the traditional byte stream
  buffer. All records carry a 64 bit timestamp, the syslog facility
  and priority in the record header.

- Records consume almost the same amount, sometimes less memory than
  the traditional byte stream buffer (if printk_time is enabled). The record
  header is 16 bytes long, plus some padding bytes at the end if needed.
  The byte-stream buffer needed 3 chars for the syslog prefix, 15 char for
  the timestamp and a newline.

- Buffer management is based on message sequence numbers. When records
  need to be discarded, the reading heads move on to the next full
  record. Unlike the byte-stream buffer, no old logged lines get
  truncated or partly overwritten by new ones. Sequence numbers also
  allow consumers of the log stream to get notified if any message in
  the stream they are about to read gets discarded during the time
  of reading.

- Better buffered IO support for KERN_CONT continuation lines, when printk()
  is called multiple times for a single line. The use of KERN_CONT is now
  mandatory to use continuation; a few places in the kernel need trivial fixes
  here. The buffering could possibly be extended to per-cpu variables to allow
  better thread-safety for multiple printk() invocations for a single line.

- Full-featured syslog facility value support. Different facilities
  can tag their messages. All userspace-injected messages enforce a
  facility value > 0 now, to be able to reliably distinguish them from
  the kernel-generated messages. Independent subsystems like a
  baseband processor running its own firmware, or a kernel-related
  userspace process can use their own unique facility values. Multiple
  independent log streams can co-exist that way in the same
  buffer. All share the same global sequence number counter to ensure
  proper ordering (and interleaving) and to allow the consumers of the
  log to reliably correlate the events from different facilities.
Tested-by: NWilliam Douglas <william.douglas@intel.com>
Signed-off-by: NKay Sievers <kay@vrfy.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Commit 9fb48c74

    "params: add 3rd arg to option handler callback signature"

added an extra arg to the function, but didn't catch all the use
cases needing it, causing this compile fail in mpc85xx_defconfig:

 arch/powerpc/mm/hugetlbpage.c:316:4: error: passing argument 7 of
 'parse_args' from incompatible pointer type [-Werror]

 include/linux/moduleparam.h:317:12: note: expected
	 'int (*)(char *, char *, const char *)' but argument is of type
	 'int (*)(char *, char *)'

This function has no need to printk out the "doing" value, so
just add the arg as an "unused".

Cc: Rusty Russell <rusty@rustcorp.com.au>
Cc: Jim Cromie <jim.cromie@gmail.com>
Cc: Jason Baron <jbaron@redhat.com>
Cc: Becky Bruce <beckyb@kernel.crashing.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NZhi Yong Wu <wuzhy@linux.vnet.ibm.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This reverts commit 04db6e5f.

Odds are, we really don't want to revert all of these, and need to be
more careful in the future to make sure we don't break the build of
other arches.
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Cc: Jim Cromie <jim.cromie@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

I left 1 printk which uses __FILE__, __LINE__ explicitly, which should
not be subject to generic preferences expressed via pr_fmt().

+ tweaks suggested by Joe Perches:
- add doing to irq-enabled warning, like others.  It wont happen often..
- change sysfs failure crit, not just err, make it 1 line in logs.
- coalese 2 format fragments into 1 >80 char line

cc: Joe Perches <joe@perches.com>
Signed-off-by: NJim Cromie <jim.cromie@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

These arent currently needed, so drop them.  Some will probably get
re-added when static-branches are added, but include loops prevent
that at present.
Signed-off-by: NJim Cromie <jim.cromie@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

In commit 9fb48c74: "params: add 3rd arg to option handler callback
signature", the if-guard added to the pr_debug was overzealous; no
callers pass NULL, and existing code above and below the guard assumes
as much.  Change the if-guard to match, and silence the Smack
complaint.

CC: Dan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NJim Cromie <jim.cromie@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

APIs using devres frequently want to implement a "remove and free the
resource" operation so it seems sensible that they should be able to
just have devres do the freeing for them since that's a big part of what
devres is all about.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

It's not massively obvious (at least to me) that removing and freeing a
resource does not involve calling the release function for the resource
but rather only removes the management of it. Make the documentation more
explicit.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

DEVICE_INT_ATTR() should use device_show_int() and device_store_int()
not device_show_ulong() and device_store_ulong()
Signed-off-by: NMichael Davidson <md@google.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

NULL not 0 should be used with pointers. Just remove the offending
lines since they will default to NULL anyway.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Acked-by: NEvgeniy Polyakov <zbr@ioremap.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Some accessory detection mechanisms are able to detect that something is
physically present in the socket separately to identifying what is present
in the socket. This information can be useful to applications, for example
allowing them to indicate that a potentially broken accessory is present,
so provide a standard way to report it to userspace.
Signed-off-by: NMark Brown <broonie@opensource.wolfsonmicro.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Make TI_EMIF depends on ARCH_OMAP2PLUS to avoid build breaks on other
architectures. In future if other TI non OMAP socs start using it, the
dependency can be extended.
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Reported-by: NPaul Gortmaker <paul.gortmaker@windriver.com>
Cc: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Fix the section mismatch be renaming the struct platform_driver
variable.
Signed-off-by: NH Hartley Sweeten <hsweeten@visionengravers.com>
Cc: MyungJoo Ham <myungjoo.ham@samsung.com>
Cc: Mark Brown <broonie@opensource.wolfsonmicro.com>
Cc: Kyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Since no one using "dup_name", removed it completely in sysfs_rename.
Signed-off-by: NSasikantha babu <sasikanth.v19@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

This was done to resolve a merge issue with the init/main.c file.
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add debug entries for:
	1. calculated registers per frequency
	2. last polled value of MR4(temperature level
	   of LPDDR2 memory)
Signed-off-by: NAneesh V <aneesh@ti.com>
Reviewed-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: NBenoit Cousson <b-cousson@ti.com>
[santosh.shilimkar@ti.com: Moved to drivers/memory from drivers/misc]
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: NLokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

Add settings that are not dependent on frequency
or any other transient parameters. This includes
- power managment control init
- impedence calibration control
- frequency independent phy configuration registers
- initialization of temperature polling
Signed-off-by: NAneesh V <aneesh@ti.com>
Reviewed-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Reviewed-by: NBenoit Cousson <b-cousson@ti.com>
[santosh.shilimkar@ti.com: Moved to drivers/memory from drivers/misc]
Signed-off-by: NSantosh Shilimkar <santosh.shilimkar@ti.com>
Tested-by: NLokesh Vutla <lokeshvutla@ti.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>