Andrew Lunn says:

====================
net: phy: marvell: Checkpatch cleanup

I will be contributing a few new features to the Marvell PHY driver
soon. Start by making the code mostly checkpatch clean. There should
not be any functional changes. Just comments set into the correct
format, missing blank lines, turn some comparisons around, and
refactoring to reduce indentation depth.

There is still one camel in the code, but it actually makes sense, so
leave it in piece.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fold lines longer than 80 characters
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Makes the code a bit more readable, and solves quite a few checkpatch
warnings of lines longer than 80 characters.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Break big functions up by using a number of smaller helper
function. Solves some of the over 80 lines warnings, by reducing the
indentation level.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Avoid multiple assignments
Comparisons should place the constant on the right side of the test
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove the extra blank lines, add one in where recommended.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use net style comment blocks, and wrap one block with long lines.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Eric Dumazet says:

====================
tcp: TCP TS option use 1 ms clock

TCP Timestamps option is defined in RFC 7323

Traditionally on linux, it has been tied to the internal
'jiffy' variable, because it had been a cheap and good enough
generator.

Unfortunately some distros use HZ=250 or even HZ=100 leading
to not very useful TCP timestamps.

For TCP flows in the DC, Google has used usec resolution for more
than two years with great success [1].
RCVBUF autotuning is more precise.

This series converts tp->tcp_mstamp to a plain u64 value storing
a 1 usec TCP clock.

This choice will allow us to upstream the 1 usec TS option as
discussed in IETF 97.

Kathleen Nichols [2] and others advocate for 1ms TS clocks for
network analysis. (1ms being the lowest value supported by RFC 7323.)

[1] https://www.ietf.org/proceedings/97/slides/slides-97-tcpm-tcp-options-for-low-latency-00.pdf
[2] http://netseminar.stanford.edu/seminars/02_02_17.pdf
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

TCP Timestamps option is defined in RFC 7323

Traditionally on linux, it has been tied to the internal
'jiffies' variable, because it had been a cheap and good enough
generator.

For TCP flows on the Internet, 1 ms resolution would be much better
than 4ms or 10ms (HZ=250 or HZ=100 respectively)

For TCP flows in the DC, Google has used usec resolution for more
than two years with great success [1]

Receive size autotuning (DRS) is indeed more precise and converges
faster to optimal window size.

This patch converts tp->tcp_mstamp to a plain u64 value storing
a 1 usec TCP clock.

This choice will allow us to upstream the 1 usec TS option as
discussed in IETF 97.

[1] https://www.ietf.org/proceedings/97/slides/slides-97-tcpm-tcp-options-for-low-latency-00.pdfSigned-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NSoheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

After this patch, all uses of tcp_time_stamp will require
a change when we introduce 1 ms and/or 1 us TCP TS option.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NSoheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tcp_time_stamp will become slightly more expensive soon,
cache its value.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NSoheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This CC does not need 1 ms tcp_time_stamp and can use
the jiffy based 'timestamp'.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NSoheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This place wants to use tcp_jiffies32, this is good enough.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NSoheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

tcp_time_stamp will no longer be tied to jiffies.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NSoheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use tcp_jiffies32 instead of tcp_time_stamp, since
tcp_time_stamp will soon be only used for TCP TS option.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NSoheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use tcp_jiffies32 instead of tcp_time_stamp, since
tcp_time_stamp will soon be only used for TCP TS option.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NSoheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use tcp_jiffies32 instead of tcp_time_stamp, since
tcp_time_stamp will soon be only used for TCP TS option.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NSoheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use tcp_jiffies32 instead of tcp_time_stamp, since
tcp_time_stamp will soon be only used for TCP TS option.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NSoheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use tcp_jiffies32 instead of tcp_time_stamp to feed
tp->snd_cwnd_stamp.

tcp_time_stamp will soon be a litle bit more expensive
than simply reading 'jiffies'.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NSoheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use tcp_jiffies32 instead of tcp_time_stamp to feed
tp->lsndtime.

tcp_time_stamp will soon be a litle bit more expensive
than simply reading 'jiffies'.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NSoheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Use our own macro instead of abusing tcp_time_stamp
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NSoheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We abuse tcp_time_stamp for two different cases :

1) base to generate TCP Timestamp options (RFC 7323)

2) A 32bit version of jiffies since some TCP fields
   are 32bit wide to save memory.

Since we want in the future to have 1ms TCP TS clock,
regardless of HZ value, we want to cleanup things.

tcp_jiffies32 is the truncated jiffies value,
which will be used only in places where we want a 'host'
timestamp.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NSoheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Idea is to later convert tp->tcp_mstamp to a full u64 counter
using usec resolution, so that we can later have fine
grained TCP TS clock (RFC 7323), regardless of HZ value.

We try to refresh tp->tcp_mstamp only when necessary.
Signed-off-by: NEric Dumazet <edumazet@google.com>
Acked-by: NSoheil Hassas Yeganeh <soheil@google.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We still need to initialize err to -EINVAL for
the case where 'opt' is NULL in dsmark_init().

Fixes: 6529eaba ("net: sched: introduce tcf block infractructure")
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Jiri Pirko says:

====================
net: sched: introduce multichain support for filters

Currently, each classful qdisc holds one chain of filters.
This chain is traversed and each filter could be matched on, which
may lead to execution of list of actions. One of such action
could be "reclassify", which would "reset" the processing of the
filter chain.

So this filter chain could be looked at as a flat table.
Sometimes it is convenient for user to configure a hierarchy
of tables. Example usecase is encapsulation.

Hierarchy of tables is a common way how it is done in HW pipelines.
So it is much more convenient to offload this.

This patchset contains two major patches:
8/10 - This patch introduces the support for having multiple
       chains of filters.
10/10 - This patch adds new control action to allow going to specified chain

The rest of the patches are smaller or bigger depencies of those 2.
Please see individual patch descriptions for details.

Corresponding iproute2 patches are appended as a reply to this cover letter.

Simple example:
$ tc qdisc add dev eth0 ingress
$ tc filter add dev eth0 parent ffff: protocol ip pref 33 flower dst_mac 52:54:00:3d:c7:6d action goto chain 11
$ tc filter add dev eth0 parent ffff: protocol ip pref 22 chain 11 flower dst_ip 192.168.40.1 action drop
$ tc filter show dev eth0 root
filter parent ffff: protocol ip pref 33 flower chain 0
filter parent ffff: protocol ip pref 33 flower chain 0 handle 0x1
  dst_mac 52:54:00:3d:c7:6d
  eth_type ipv4
        action order 1: gact action goto chain 11
         random type none pass val 0
         index 2 ref 1 bind 1

filter parent ffff: protocol ip pref 22 flower chain 11
filter parent ffff: protocol ip pref 22 flower chain 11 handle 0x1
  eth_type ipv4
  dst_ip 192.168.40.1
        action order 1: gact action drop
         random type none pass val 0
         index 3 ref 1 bind 1
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Introduce new type of termination action called "goto_chain". This allows
user to specify a chain to be processed. This action type is
then processed as a return value in tcf_classify loop in similar
way as "reclassify" is, only it does not reset to the first filter
in chain but rather reset to the first filter of the desired chain.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Acked-by: NJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Tp pointer will be needed by the next patch in order to get the chain.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Acked-by: NJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Instead of having only one filter per block, introduce a list of chains
for every block. Create chain 0 by default. UAPI is extended so the user
can specify which chain he wants to change. If the new attribute is not
specified, chain 0 is used. That allows to maintain backward
compatibility. If chain does not exist and user wants to manipulate with
it, new chain is created with specified index. Also, when last filter is
removed from the chain, the chain is destroyed.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Acked-by: NJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since there will be multiple chains to dump, push chain dumping code to
a separate function.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Acked-by: NJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Introduce struct tcf_chain object and set of helpers around it. Wraps up
insertion, deletion and search in the filter chain.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Acked-by: NJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Call the helper from the function rather than to always adjust the
return value of the function.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Acked-by: NJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The use of "nprio" variable in tc_ctl_tfilter is a bit cryptic and makes
a reader wonder what is going on for a while. So help him to understand
this priority allocation dance a litte bit better.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Acked-by: NJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Make the name consistent with the rest of the helpers around.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Acked-by: NJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Currently, the filter chains are direcly put into the private structures
of qdiscs. In order to be able to have multiple chains per qdisc and to
allow filter chains sharing among qdiscs, there is a need for common
object that would hold the chains. This introduces such object and calls
it "tcf_block".

Helpers to get and put the blocks are provided to be called from
individual qdisc code. Also, the original filter_list pointers are left
in qdisc privs to allow the entry into tcf_block processing without any
added overhead of possible multiple pointer dereference on fast path.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Acked-by: NJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Move tc_classify function to cls_api.c where it belongs, rename it to
fit the namespace.
Signed-off-by: NJiri Pirko <jiri@mellanox.com>
Acked-by: NJamal Hadi Salim <jhs@mojatatu.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Andrew Lunn says:

====================
net: dsa: Sort various lists

As we gain more DSA drivers and tagging protocols, the lists are
getting a bit unruly. Do some sorting.
====================
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With more drivers being added, it is time to sort the drivers to
impose some order.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Reviewed-by: NFlorian Fainelli <f.fainelli@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With more tag protocols being added, regain some order by sorting the
entries in various places.
Signed-off-by: NAndrew Lunn <andrew@lunn.ch>
Reviewed-by: NVivien Didelot <vivien.didelot@savoirfairelinux.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In the function assigned to .ndo_set_vf_mac, check the validity of the
vfidx argument before proceeding to tell the firmware to set the VF MAC
address.
Signed-off-by: NFelix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: NDerek Chickles <derek.chickles@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When multiple liquidio NICs are plugged in, the first insmod of the PF
driver succeeds.  But after an rmmod, a subsequent insmod fails.  Reason is
during rmmod, the PF driver resets the Octeon of only one of the NICs; it
neglects to reset the Octeons of the other NICs.

Fix the insmod failure by adding the missing Octeon resets at rmmod.  Keep
a per-NIC refcount that indicates the number of active PFs in a given NIC.
When the refcount goes to zero, then reset the Octeon of that NIC.
Signed-off-by: NRick Farrington <ricardo.farrington@cavium.com>
Signed-off-by: NFelix Manlunas <felix.manlunas@cavium.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>