- 19 11月, 2005 2 次提交
-
-
-
由 Jeff Garzik 提交于
-
- 18 11月, 2005 38 次提交
-
-
由 Martin Schwidefsky 提交于
Add the missing NULL argument to the class_device_create calls. Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andy Whitcroft 提交于
With the new powerpc architecture we don't seem to be able to disable huge pages anymore. mm/built-in.o(.toc1+0xae0): undefined reference to `HPAGE_SHIFT' make: *** [.tmp_vmlinux1] Error 1 We seem to need to define HPAGE_SHIFT to something when HUGETLB_PAGE isn't defined. This patch defines it to PAGE_SHIFT when we have no support. Signed-off-by: NAndy Whitcroft <apw@shadowen.org> Cc: Paul Mackerras <paulus@samba.org> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 NeilBrown 提交于
[PATCH] md: fix is_mddev_idle calculation now that disk/sector accounting happens when request completes md needs to monitor the rate of requests to its devices when doing resync/recovery so that it can back-off when there is non-resync IO. It does this by comparing resync IO, which it counts, with total IO which is taken from disk_stats. disk_stats were recently changed to account sectors when a request completes instead of when it is queued. This upsets md's calculations. We could do the sync_io accounting at the end of requests too, but that has problems. If an underlying device is an md array, the accounting will still be done when the request is submitted. This could be changed for some raid levels, but it cannot be changed for raid0 or linear without substantial code changes. So instead, we increase the error that is_mddev_idle allows, up to the maximum amount of resync IO that can be in flight at any time. The calculation is current fragile as each personality as different limits for in-flight resync. This should be fixed up. For now, this simple patch fixes the problem. Increasing the error margin decreases the sensitivity to non-resync IO. To partially compensate for this, the time to wait when non-resync IO is detected is increased so that less steady IO is required to keep the resync at bay. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Neil Brown 提交于
Some filesystems go oops. Signed-off-by: NNeil Brown <neilb@suse.de> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Kylene Jo Hall 提交于
The driver dependencies on PCI have been removed. This patch clears that up in the Kconfig file Signed-off-by: NKylene Hall <kjhall@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Kylene Jo Hall 提交于
Use ioread8 and iowrite8 as suggested. Signed-off-by: NKylene Hall <kjhall@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Kylene Jo Hall 提交于
Add the necessary flush_schedule_work calls when canceling the timer. Signed-off-by: NKylene Hall <kjhall@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Vitaly Bordug 提交于
This adds the FCC_PSMR_RMII defenition, which is used in fs_enet to enable RMII mode. Signed-off-by: NVitaly Bordug <vbordug@ru.mvista.com> Cc: Jeff Garzik <jgarzik@pobox.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Matt Domsch 提交于
On IPMI systems with BT interfaces, we don't start the kernel thread, so smi_info->thread is NULL. Test for NULL when stopping the thread, because kthread_stop() doesn't, and an oops ensues otherwise. Signed-off-by: NMatt Domsch <Matt_Domsch@dell.com> Acked-by: NCorey Minyard <minyard@acm.org> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Hans Reiser 提交于
2.6.14 has this exported, and reiser4 (at least) uses it. Put things back the way they were. Signed-off-by: NVladimir V. Saveliev <vs@namesys.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Paul E. McKenney 提交于
One issue with the RCU torture test is that the current error flagging can be lost in dmesg. This patch adds a "SUCCESS"/"FAILURE" string to the line that flags the end of the test, where it can easily be seen with "dmesg | tail" at the end of the test. Also adds tests of architecture-specific memory barriers -- or, more likely, of the RCU torture test itself. Cc: <vatsa@in.ibm.com> Signed-off-by: N"Paul E. McKenney" <paulmck@us.ibm.com> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Andrey Volkov 提交于
Fix copy-paste bug in ohci-ppc-soc.c(ohci_hcd_ppc_soc_drv_remove) Signed-off-by: NAndrey Volkov <avolkov@varma-el.com> Cc: Russell King <rmk@arm.linux.org.uk> Signed-off-by: NAndrew Morton <akpm@osdl.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Linus Torvalds 提交于
Properly clear the memory, and set "pr->flags.power" only if a C2 or deeper state is valid (to make the code match both the comment and previous behaviour). This fixes a boot-time lockup reported by Maneesh Soni when using "maxcpus=1". Acked-by: NManeesh Soni <maneesh@in.ibm.com> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 Paul Mackerras 提交于
The code Ben H added needs <linux/pci.h> for things like pci_dev, etc. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
make defconfig will now use arch/powerpc/configs/ppc64_defconfig if running on a ppc64 system. I need to add an arch/powerpc/configs/ppc_defconfig sometime. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
This makes 32-bit CHRP systems use the RTAS time-of-day routines if available. It fixes a bug in the RTAS time-of-day routines where they were storing a 64-bit timebase value in an unsigned long by making those variables u64. Also, the direct-access time-of-day routines had the wrong convention for the month and year in the struct rtc_time. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
pseries_dedicated_idle() was using __get_tb which used to be defined in asm/delay.h. Change it to use get_tb from asm/time.h, which is in fact exactly the same thing. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
This also deletes the now-unused Makefiles under arch/ppc64. Both of the files moved over could use some merging, but for now I have moved them as-is and arranged for them to be used only in 64-bit kernels. For 32-bit kernels we still use arch/ppc/kernel/idle.c and drivers/char/generic_nvram.c as before. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Mike Kravetz 提交于
The config option SPAN_OTHER_NODES was created so that we could make pSeries numa layouts work within the DISCONTIG memory model. Now that DISCONTIG has been replaced by SPARSEMEM, we can eliminate this option. I'll be sending a separate patch to Andrew to remove the arch independent code as pSeries was the only arch that needed this. Signed-off-by: NMike Kravetz <kravetz@us.ibm.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Benjamin Herrenschmidt 提交于
This patch merges align.c, the result isn't quite what was in ppc64 nor what was in ppc32 :) It should implement all the functionalities of both though. Kumar, since you played with that in the past, I suppose you have some test cases for verifying that it works properly before I dig out the 601 machine ? :) Since it's likely that I won't be able to test all scenario, code inspection is much welcome. Signed-off-by: NBenjamin Herrenschmidt <benh@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Paul Mackerras 提交于
My earlier merge of delay.h introduced a timebase-based udelay for 32-bit machines but also broke the 601, which doesn't have the timebase register. This fixes it by using the 601's RTC register on the 601, and also moves __delay() and udelay() to be out-of-line in arch/powerpc/kernel/time.c. These functions aren't really performance critical, after all. Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Kumar Gala 提交于
When we moved things around in irq.h seq_file became an issue. Fix warnings related to its usage. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Kumar Gala 提交于
The SVRs for MPC8343/E were incorrect and really the SVRs for MPC8347/E. Signed-off-by: NDavid Updegraff <dave@cray.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Segher Boessenkool 提交于
Reserve the Maple RTC I/O resource. Needed now we use genrtc. Signed-off-by: NSegher Boessenkool <segher@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Olaf Hering 提交于
Replacing the string labels with numbers saves 117 bytes in the final zImage. These local labels are not discared. Signed-off-by: NOlaf Hering <olh@suse.de> arch/powerpc/boot/crt0.S | 23 +++++++++++------------ 1 files changed, 11 insertions(+), 12 deletions(-) Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
The fix to topology.h (5cfccd7f) seems to have a typeo, struct sched_domain has an idle_idx member but not an idle_id member. I assume this is the fix. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Linus Torvalds 提交于
-
由 Linus Torvalds 提交于
-
由 Kumar Gala 提交于
When we moved things around in irq.h seq_file became an issue. Fix warnings related to its usage. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
-
由 David S. Miller 提交于
Revert: 8225ccba Based upon a report by Yan Zheng. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Roman Zippel 提交于
On Thu, 17 Nov 2005, David Gómez wrote: > I found out that if i select NET_CLS_ROUTE4, save my changes and exit > menuconfig, execute again make menuconfig and go to QoS options, then the new > available options are visible. So menuconfig has some problem refreshing > contents :? No, they were there before too, but you have to go up one level to see them. It's better in 2.6.15-rc1-git5, but the menu structure is still a little messed up, the patch below properly indents all menu entries. Signed-off-by: NRoman Zippel <zippel@linux-m68k.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
Noticed by Olaf Hering. The comparisons want a u8 here (the data type on the left-hand branch is a u8 structure member, and the constant on the right-hand branch is "~((u8) 128)"), but C turns it into an integer so we get: net/llc/llc_c_ac.c: In function `llc_conn_ac_inc_npta_value': net/llc/llc_c_ac.c:998: warning: comparison is always true due to limited range of data type net/llc/llc_c_ac.c:999: warning: large integer implicitly truncated to unsigned type Fix this up by explicitly recasting the right-hand branch constant into a "u8" once more. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Harald Welte 提交于
Since we've converted the ftp/irc/tftp helpers to use the new module_parm_array() some time ago, we ware accidentially using signed data types - thus preventing those modules from being used on ports >= 32768. This patch fixes it by using 'ushort' module parameters. Thanks to Jan Nijs for reporting this bug. Signed-off-by: NHarald Welte <laforge@netfilter.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David S. Miller 提交于
So things like on-line resizing et al. work. Based almost entirely upon a patch by Guido Gnther <agx@sigxcpu.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Stephen Hemminger 提交于
There is a compile error that crept in with the last patch of TCP patches. Signed-off-by: NStephen Hemminger <shemminger@osdl.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jens Axboe 提交于
We must reassign z before looping through the zones kicking kswapd, since it will be NULL if we hit an OOM condition and jump back to the beginning again. 'z' is initially assigned before the restart: label. So move the restart label up a little. Signed-off-by: NJens Axboe <axboe@suse.de>
-