/dev/ptmx is closely tied to the devpts filesystem. An open of /dev/ptmx,
allocates the next pty index and the associated device shows up in the
devpts fs as /dev/pts/n.

Wih multiple instancs of devpts filesystem, during an open of /dev/ptmx
we would be unable to determine which instance of the devpts is being
accessed.

So we move the 'ptmx' node into /dev/pts and use the inode of the 'ptmx'
node to identify the superblock and hence the devpts instance.  This patch
adds ability for the kernel to internally create the [ptmx, c, 5:2] device
when mounting devpts filesystem.  Since the ptmx node in devpts is new and
may surprise some userspace scripts, the default permissions for the new
node is 0000.  These permissions can be changed either using chmod or by
remounting with the new '-o ptmxmode=0666' mount option.

Changelog[v5]:
	- [Serge Hallyn bugfix]: Letting new_inode() assign inode number to
	  ptmx can collide with hand-assigning inode numbers to ptys. So,
	  hand-assign specific inode number to ptmx node also.
	- [Serge Hallyn]: Maybe safer to grab root dentry mutex while creating
	  ptmx node
	- [Bugfix with Serge Hallyn] Replace lookup_one_len() in mknod_ptmx()
	  wih d_alloc_name() (lookup during ->get_sb() locks up system). To
	  simplify patchset, fold the ptmx_dentry patch into this.

Changelog[v4]:
	- Change default permissions of pts/ptmx node to 0000.
	- Move code for ptmxmode under #ifdef CONFIG_DEVPTS_MULTIPLE_INSTANCES.

Changelog[v3]:
	- Rename ptmx_mode to ptmxmode (for consistency with 'newinstance')

Changelog[v2]:
	- [H. Peter Anvin] Remove mknod() system call support and create the
	  ptmx node internally.

Changelog[v1]:
	- Earlier version of this patch enabled creating /dev/pts/tty as
	  well. As pointed out by Al Viro and H. Peter Anvin, that is not
	  really necessary.
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Move code to parse mount options into a separate function so it can
(later) be shared between mount and remount operations.
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

With support for multiple mounts of devpts, the 'config' structure really
represents per-mount options rather than config parameters. Rename 'config'
structure to 'pts_mount_opts' and store it in the super-block.
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

To enable multiple mounts of devpts, 'allocated_ptys' must be a per-mount
variable rather than a global variable.  Move 'allocated_ptys' into the
super_block's s_fs_info.

Changelog[v2]:
	Define and use DEVPTS_SB() wrapper.
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Remove the 'devpts_root' global variable and find the root dentry using
the super_block. The super-block can be found from the device inode, using
the new wrapper, pts_sb_from_inode().

Changelog: This patch is based on an earlier patchset from Serge Hallyn
	   and Matt Helsley.
Signed-off-by: NSukadev Bhattiprolu <sukadev@linux.vnet.ibm.com>
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Now the main work is done its polishing time
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Fixes the loss of echoed (and other ldisc-generated characters) when
the tty is stopped or when the driver output buffer is full (happens
frequently for input during continuous program output, such as ^C)
and removes the Big Kernel Lock from the N_TTY line discipline.

Adds an "echo buffer" to the N_TTY line discipline that handles all
ldisc-generated output (including echoed characters).  Along with the
loss of characters, this also fixes the associated loss of sync between
tty output and the ldisc state when characters cannot be immediately
written to the tty driver.

The echo buffer stores (in addition to characters) state operations that need
to be done at the time of character output (like management of the column
position).  This allows echo to cooperate correctly with program output,
since the ldisc state remains consistent with actual characters written.

Since the echo buffer code now isolates the tty column state code
to the process_out* and process_echoes functions, we can remove the
Big Kernel Lock (BKL) and replace it with mutex locks.

Highlights are:

* Handles echo (and other ldisc output) when tty driver buffer is full
  - continuous program output can block echo
* Saves echo when tty is in stopped state (e.g. ^S)
  - (e.g.: ^Q will correctly cause held characters to be released for output)
* Control character pairs (e.g. "^C") are treated atomically and not
  split up by interleaved program output
* Line discipline state is kept consistent with characters sent to
  the tty driver
* Remove the big kernel lock (BKL) from N_TTY line discipline
Signed-off-by: NJoe Peterson <joe@skyrush.com>
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Add spin_lock_irqsave() when receive and transfer data.
Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Bug description:
The IRDA receiver may can't receiving any more after processed some signals.

To duplicate this issue is put three IRDA devices together, one blackfin,
two none blackfin, they will detect each other. Let one none blackfin devices
irdaping the blackfin devices, when it stopped print out ping information,
it is the time that blackfin stoped receiving, the time is random.

The related register bit is OK, the other devices is sending data continuously.
But no interrupt come.

Fixing:
I tried Michael's suggestion that request the UARTx error interrupt, and reset
the IRDA when found FE error. This method helps much, but it can't completely
avoid stop.

Reset the IRDA before every time sending the data is more safe.
Signed-off-by: NGraf Yang <graf.yang@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Signed-off-by: NSonic Zhang <sonic.zhang@analog.com>
Signed-off-by: NBryan Wu <cooloney@kernel.org>
Signed-off-by: NAlan Cox <alan@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs-2.6: (34 commits)
  nfsd race fixes: jfs
  nfsd race fixes: reiserfs
  nfsd race fixes: ext4
  nfsd race fixes: ext3
  nfsd race fixes: ext2
  nfsd/create race fixes, infrastructure
  filesystem notification: create fs/notify to contain all fs notification
  fs/block_dev.c: __read_mostly improvement and sb_is_blkdev_sb utilization
  kill ->dir_notify()
  filp_cachep can be static in fs/file_table.c
  fix f_count description in Documentation/filesystems/files.txt
  make INIT_FS use the __RW_LOCK_UNLOCKED initialization
  take init_fs to saner place
  kill vfs_permission
  pass a struct path * to may_open
  kill walk_init_root
  remove incorrect comment in inode_permission
  expand some comments (d_path / seq_path)
  correct wrong function name of d_put in kernel document and source comment
  fix switch_names() breakage in short-to-short case
  ...

jfs version of Al Viro's nfsd race patches
Signed-off-by: NDave Kleikamp <shaggy@linux.vnet.ibm.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

... and the same for reiserfs.  The difference here is that we need
insert_inode_locked4() to match iget5_locked().
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

ext3 analog of the previous patch
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

* make ext2_new_inode() put the inode into icache in locked state
* do not unlock until the inode is fully set up; otherwise nfsd
might pick it in half-baked state.
* make sure that ext2_new_inode() does *not* lead to two inodes with the
same inumber hashed at the same time; otherwise a bogus fhandle coming
from nfsd might race with inode creation:

nfsd: iget_locked() creates inode
nfsd: try to read from disk, block on that.
ext2_new_inode(): allocate inode with that inumber
ext2_new_inode(): insert it into icache, set it up and dirty
ext2_write_inode(): get the relevant part of inode table in cache,
set the entry for our inode (and start writing to disk)
nfsd: get CPU again, look into inode table, see nice and sane on-disk
inode, set the in-core inode from it

oops - we have two in-core inodes with the same inumber live in icache,
both used for IO.  Welcome to fs corruption...
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

new helpers - insert_inode_locked() and insert_inode_locked4().
Hash new inode, making sure that there's no such inode in icache
already.  If there is and it does not end up unhashed (as would
happen if we have nfsd trying to resolve a bogus fhandle), fail.
Otherwise insert our inode into hash and succeed.

In either case have i_state set to new+locked; cleanup ends up
being simpler with such calling conventions.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Creating a generic filesystem notification interface, fsnotify, which will be
used by inotify, dnotify, and eventually fanotify is really starting to
clutter the fs directory.  This patch simply moves inotify and dnotify into
fs/notify/inotify and fs/notify/dnotify respectively to make both current fs/
and future notification tidier.
Signed-off-by: NEric Paris <eparis@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

- iget5_locked in bdget really needs blockdev_superblock, instead of
  bd_mnt, so bd_mnt could be just a local variable;

- blockdev_superblock really needs __read_mostly, while local var bd_mnt
  not;

- make use of sb_is_blkdev_sb in bd_forget, instead of direct reference
  to blockdev_superblock.
Signed-off-by: NDenis ChengRq <crquan@gmail.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Remove the hopelessly misguided ->dir_notify().  The only instance (cifs)
has been broken by design from the very beginning; the objects it creates
are never destroyed, keep references to struct file they can outlive, nothing
that could possibly evict them exists on close(2) path *and* no locking
whatsoever is done to prevent races with close(), should the previous, er,
deficiencies someday be dealt with.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Instead of creating the "filp" kmem_cache in vfs_caches_init(),
we can do it a litle be later in files_init(), so that filp_cachep
is static to fs/file_table.c
Acked-by: NPaul E. McKenney <paulmck@linux.vnet.ibm.com>
Signed-off-by: NEric Dumazet <dada1@cosmosbay.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Documentation/filesystems/files.txt was not updated when
f_count became an atomic_long_t.
atomic_long_inc_not_zero() is now used instead of atomic_inc_not_zero()
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

[AV: rediffed on top of unification of init_fs]
Initialization of init_fs still uses the deprecated RW_LOCK_UNLOCKED macro.
This patch updates it to use the __RW_LOCK_UNLOCKED(lock) macro.
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

With all the nameidata removal there's no point anymore for this helper.
Of the three callers left two will go away with the next lookup series
anyway.

Also add proper kerneldoc to inode_permission as this is the main
permission check routine now.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

No need for the nameidata in may_open - a struct path is enough.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

walk_init_root is a tiny helper that is marked __always_inline, has just
one caller and an unused argument.  Just merge it into the caller.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

We now pass on all MAY_ flags to the filesystems permission routines,
so remove the comment stating the contrary.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Explain that you really need to use the return value of d_path rather than
the buffer you passed into it.

Also fix the comment for seq_path(), the function arguments changed
recently but the comment hadn't been updated in sync.
Signed-off-by: NArjan van de Ven <arjan@linux.intel.com>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Cc: Christoph Hellwig <hch@lst.de>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

no function named d_put(), it should be dput().

Impact: fix document and comment, no functionality changed
Signed-off-by: NZhao Lei <zhaolei@cn.fuijtsu.com>
Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

We want ->name.len to match the resulting name on *both*
source and target
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Ensure fast symlink targets are NUL-terminated, even if corrupted
on-disk.

Cc: Sergey S. Kostyliov <rathamahata@php4.ru>
Signed-off-by: NDuane Griffin <duaneg@dghda.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Ensure fast symlink targets are NUL-terminated, even if corrupted
on-disk.

Cc: Christoph Hellwig <hch@infradead.org>
Signed-off-by: NDuane Griffin <duaneg@dghda.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Ensure fast symlink targets are NUL-terminated, even if corrupted
on-disk.

Cc: Christoph Hellwig <hch@infradead.org>
Cc: Al Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NDuane Griffin <duaneg@dghda.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Ensure fast symlink targets are NUL-terminated, even if corrupted
on-disk.

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Theodore Ts'o <tytso@mit.edu>
Cc: adilger@sun.com
Cc: linux-ext4@vger.kernel.org
Signed-off-by: NDuane Griffin <duaneg@dghda.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Ensure fast symlink targets are NUL-terminated, even if corrupted
on-disk.

Cc: Andrew Morton <akpm@linux-foundation.org>
Cc: Stephen Tweedie <sct@redhat.com>
Cc: linux-ext4@vger.kernel.org
Signed-off-by: NDuane Griffin <duaneg@dghda.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Ensure fast symlink targets are NUL-terminated, even if corrupted
on-disk.

Cc: Andrew Morton <akpm@linux-foundation.org>
Signed-off-by: NDuane Griffin <duaneg@dghda.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>