Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Only print one AE error for a given connection in the kernel log.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Stop the endpoint timer when the MPA exchange is aborted by the peer.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Change iwch_destroy_qp() to always move the QP to ERROR and let
iwch_modify_qp() decide what to do.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Fixes for "normal close" failures:

- Start normal close timer when moving to CLOSING state.
- Handle ABORTING state in close_con_rpl().
- Stop timer correctly on abort during a normal close.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

cxgb3 uses dma_alloc_coherent() et al. thus needs linux/dma-mapping.h
include in order to build reliably.

Noticed on sparc64.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>
Acked-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

The struct rdma_bind_list fields for hlist are not being initialized,
resulting in a corrupted list.  Fix this by using kzalloc() to make
sure all pointers are NULL.
Signed-off-by: NSean Hefty <sean.hefty@intel.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

If the consumer rejects the connection we end up under-referencing the
endpoint structure.  The fix is to call iwch_ep_disconnect() instead
of the low level disconnect functions so that the endpoint close timer
is started correctly.
Signed-off-by: NSteve Wise <swise@opengridcomputing.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

The garbled logic in mthca_alloc_memfree() causes it to return 0, even
if it fails to allocate all doorbell records.  Fix it to return -ENOMEM
when it fails.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

This patch fixes two issues reported by Roland Dreier and Christoph Hellwig:

- Mismatched sync/locking between completion handler and destroy cq We
  introduced a counter nr_events per cq to track number of irq events
  seen. This counter is incremented when an event queue entry is seen
  and decremented after completion handler has been called regardless
  if scaling code is active or not. Note that nr_callbacks tracks
  number of events assigned to a cpu and both counters can potentially
  diverge.

  The sync between running completion handler and destroy cq is done
  by using the global spin lock ehca_cq_idr_lock.

- Replace yield by wait_event on the counter above to become zero.
Signed-off-by: NHoang-Nam Nguyen <hnguyen@de.ibm.com>
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

An asynchronous event carries the port number that the event occurred
on, so there's no reason for an IPoIB interface to process an event
associated with a different local HCA port.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

* master.kernel.org:/pub/scm/linux/kernel/git/davej/cpufreq:
  [CPUFREQ] constify some data tables.
  [CPUFREQ] constify cpufreq_driver where possible.
  {rd,wr}msr_on_cpu SMP=n optimization
  [CPUFREQ] cpufreq_ondemand.c: don't use _WORK_NAR
  rdmsr_on_cpu, wrmsr_on_cpu
  [CPUFREQ] Revert default on deprecated config X86_SPEEDSTEP_CENTRINO_ACPI

* master.kernel.org:/home/rmk/linux-2.6-arm:
  [ARM] CLPS7500 doesn't have IO ports
  [ARM] Fix more apm-emulation.h
  [ARM] 4234/1: Introduce get_irqnr_preamble and arch_ret_to_user for ns9xxx.
  [ARM] 4233/1: nand/s3c2410.c: warning fix
  [ARM] 4226/1: initial .data and .bss mappings of XIP kernel should be TEXT_OFFSET
  [ARM] 4224/2: allow XIP kernel to boot again
  [ARM] 4232/1: AT91: Generic GPIO bug
  [ARM] 4231/1: AT91: Merge and typo fixes.
  [ARM] 4229/1: S3C2410: Add MACH_QT2410 to s3c2410_defconfig
  [ARM] 4228/2: S3C24XX: update s3c2410_defconfig for 2.6.21-rc1

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/roland/infiniband:
  IPoIB: Correct debugging output when path record lookup fails
  RDMA/cxgb3: Stop the EP Timer on BAD CLOSE
  RDMA/cxgb3: cleanups
  RDMA/cma: Remove unused node_guid from cma_device structure
  IB/cm: Remove ca_guid from cm_device structure
  RDMA/cma: Request reversible paths only
  IB/core: Set hop limit in ib_init_ah_from_wc correctly
  IB/uverbs: Return correct error for invalid PD in register MR
  IPoIB: Remove unused local_rate tracking
  IPoIB/cm: Improve small message bandwidth
  IB/mthca: Make 2 functions static

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

The change to the devres layer re-orders the execution of cleanup
functions and in turn causes the pcmcia layer to oops as it zaps a
pointer now needed later on. We simply leave the pointer alone.
Signed-off-by: NAlan Cox <alan@redhat.com>
Acked-by: NJeff Garzik <jeff@garzik.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Paulus preferred this over #defining NO_IRQ in the file, since that's
0 for powerpc anyway.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Acked-by: NPaul Mackerras <paulus@samba.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

If path_rec_completion() is passed a non-NULL path record pointer
along with an unsuccessful status value, the tracing code incorrectly
prints the (invalid) DLID from the path record rather than the more
interesting status code.  The actual logic of the function correctly
uses the path record only if the status indicates a successful lookup.
Signed-off-by: NRoland Dreier <rolandd@cisco.com>

Toralf Förster pointed out that drivers/video/s3fb.c would fail to compile:
> ...
>   CC      drivers/video/s3fb.o
> drivers/video/s3fb.c: In function `s3_pci_remove':
> drivers/video/s3fb.c:1003: warning: unused variable `par'
> drivers/video/s3fb.c: In function `s3fb_setup':
> drivers/video/s3fb.c:1141: error: `mtrr' undeclared (first use in this function)
> drivers/video/s3fb.c:1141: error: (Each undeclared identifier is reported only once
> drivers/video/s3fb.c:1141: error: for each function it appears in.)
> make[2]: *** [drivers/video/s3fb.o] Error 1
> make[1]: *** [drivers/video] Error 2
> make: *** [drivers] Error 2

Here is fix, it also fixes broken boot options.
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Jeremy Fitzhardinge suggested the use of -freg-struct-return, which does
structure-returns (such as when using pte_t) in registers instead of on
the stack.

that is indeed so, and this option reduced the kernel size a bit:

    text    data     bss     dec     hex filename
 4799506  543456 3760128 9103090  8ae6f2 vmlinux.before
 4798117  543456 3760128 9101701  8ae185 vmlinux.after

the resulting kernel booted fine on my testbox. Lets go for it.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Thomas is the maintainer and primary author of the high-res timers,
clockevents and dynticks code.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* master.kernel.org:/pub/scm/linux/kernel/git/kyle/parisc-2.6: (78 commits)
  [PARISC] Use symbolic last syscall in __NR_Linux_syscalls
  [PARISC] Add missing statfs64 and fstatfs64 syscalls
  Revert "[PARISC] Optimize TLB flush on SMP systems"
  [PARISC] Compat signal fixes for 64-bit parisc
  [PARISC] Reorder syscalls to match unistd.h
  Revert "[PATCH] make kernel/signal.c:kill_proc_info() static"
  [PARISC] fix sys_rt_sigqueueinfo
  [PARISC] fix section mismatch warnings in harmony sound driver
  [PARISC] do not export get_register/set_register
  [PARISC] add ENTRY()/ENDPROC() and simplify assembly of HP/UX emulation code
  [PARISC] convert to use CONFIG_64BIT instead of __LP64__
  [PARISC] use CONFIG_64BIT instead of __LP64__
  [PARISC] add ASM_EXCEPTIONTABLE_ENTRY() macro
  [PARISC] more ENTRY(), ENDPROC(), END() conversions
  [PARISC] fix ENTRY() and ENDPROC() for 64bit-parisc
  [PARISC] Fixes /proc/cpuinfo cache output on B160L
  [PARISC] implement standard ENTRY(), END() and ENDPROC()
  [PARISC] kill ENTRY_SYS_CPUS
  [PARISC] clean up debugging printks in smp.c
  [PARISC] factor syscall_restart code out of do_signal
  ...

Fix conflict in include/linux/sched.h due to kill_proc_info() being made
publicly available to PARISC again.

Update my email address in CREDITS to one that works.
Signed-off-by: NMikael Pettersson <mikpe@it.uu.se>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Replace pci_module_init with pci_register_driver
Signed-off-by: NRichard Knutson <ricknu-0@student.ltu.se>
Acked-by: NBen Dooks <ben-linux@fluff.org>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

* master.kernel.org:/pub/scm/linux/kernel/git/davem/net-2.6: (25 commits)
  [XFRM]: Fix oops in xfrm4_dst_destroy()
  [XFRM_TUNNEL]: Reload header pointer after pskb_may_pull/pskb_expand_head
  [IPV4]: Use random32() in net/ipv4/multipath
  [BRIDGE]: eliminate workqueue for carrier check
  [BRIDGE]: get rid of miscdevice include
  [IPV6]: Fix __ipv6_addr_type() export in correct place.
  [IPV4] devinet: Register inetdev earlier.
  [IPV6] ADDRCONF: Register inet6_dev earlier.
  [IPV6] ADDRCONF: Manage prefix route corresponding to address manually added.
  [IPV6] IP6TUNNEL: Use update_pmtu() of dst on xmit.
  [IPV6] ADDRCONF: Statically link __ipv6_addr_type() for sunrpc subsystem.
  [IPV4]: Correct links in net/ipv4/Kconfig
  [SCTP]: Strike the transport before updating rto.
  [SCTP]: Fix connection hang/slowdown with PR-SCTP
  [TCP]: Fix MD5 signature pool locking.
  [TG3]: TSO workaround fixes.
  [AF_PACKET]: Remove unnecessary casts.
  [IPV6]: Adjust inet6_exit() cleanup sequence against inet6_init()
  [IPSEC]: More fix is needed for __xfrm6_bundle_create().
  [IRDA] net/irda/: proper prototypes
  ...

With 2.6.21-rc1, I get an oops when running 'ifdown eth0' and an IPsec
connection is active. If I shut down the connection before running 'ifdown
eth0', then there's no problem.  The critical operation of this script is to
kill dhcpd.

The problem is probably caused by commit with git identifier
43372262 (Linus tree) "[IPSEC]: IPv4 over IPv6
IPsec tunnel".

This patch fixes that oops. I don't know the network code of the Linux
kernel in deep, so if that fix is wrong, please change it. But please
fix the oops. :)
Signed-off-by: NBernhard Walle <bwalle@suse.de>
Acked-by: NPatrick McHardy <kaber@trash.net>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

* 'for-linus' of master.kernel.org:/pub/scm/linux/kernel/git/jmorris/selinux-2.6:
  Always initialize scontext and scontext_len
  Reassign printk levels in selinux kernel code

* master.kernel.org:/pub/scm/linux/kernel/git/davem/sparc-2.6:
  [SPARC] uctrl: Check request_irq() return value.
  [SPARC64]: Update defconfig.
  [SPARC64] bbc_i2c: Fix kenvctrld eating %100 cpu.
  [SPARC64]: Fix arch_teardown_msi_irq().
  [SPARC64]: virt_irq_free only needed when CONFIG_PCI_MSI
  [SPARC]: Remove the broken SUN_AURORA driver.

* 'for-linus' of git://git.o-hand.com/linux-rpurdie-leds:
  leds: Add support for Cobalt Server front LED
  leds: Add IPAQ h1940 LEDs support

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/shaggy/jfs-2.6:
  JFS: Get rid of "may be used uninitialized" warnings

Always initialize *scontext and *scontext_len in security_sid_to_context.

(via http://lkml.org/lkml/2007/2/23/135)
Signed-off-by: NStephen Smalley <sds@tycho.nsa.gov>
Signed-off-by: NJames Morris <jmorris@namei.org>

Below is a patch which demotes many printk lines to KERN_DEBUG from
KERN_INFO.  It should help stop the spamming of logs with messages in
which users are not interested nor is there any action that users should
take.  It also promotes some KERN_INFO to KERN_ERR such as when there
are improper attempts to register/unregister security modules.

A similar patch was discussed a while back on list:
http://marc.theaimsgroup.com/?t=116656343500003&r=1&w=2
This patch addresses almost all of the issues raised.  I believe the
only advice not taken was in the demoting of messages related to
undefined permissions and classes.
Signed-off-by: NEric Paris <eparis@redhat.com>
Acked-by: NStephen Smalley <sds@tycho.nsa.gov>

 security/selinux/hooks.c       |   20 ++++++++++----------
 security/selinux/ss/avtab.c    |    2 +-
 security/selinux/ss/policydb.c |    6 +++---
 security/selinux/ss/sidtab.c   |    2 +-
 4 files changed, 15 insertions(+), 15 deletions(-)
Signed-off-by: NJames Morris <jmorris@namei.org>

           Please consider applying, this was found on your latest
net-2.6 tree while playing around with that ip_hdr() + turn
skb->nh/h/mac pointers  as offsets on 64 bits idea :-)
Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Removed local random number generator function
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Having a work queue for checking carrier leads to lots of race issues.
Simpler to just get the cost when data structure is created and
update on change.
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The bridge hasn't used miscdevice for a long long time.
Signed-off-by: NStephen Hemminger <shemminger@linux-foundation.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

It needs to be in net/ipv6/addrconf_core.c
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch allocates inetdev at registration for all devices
in line with IPv6.  This allows sysctl configuration on the
devices to occur before they're brought up or addresses are
added.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Signed-off-by: NYOSHIFUJI Hideaki <yoshfuji@linux-ipv6.org>