- 26 1月, 2015 3 次提交
-
-
由 Clemens Ladisch 提交于
Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
Due to SNDRV_SEQ_ADDRESS_BROADCAST, not all 256 port number values can be used. Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Clemens Ladisch 提交于
When the last subscriber to a "Through" port has been removed, the subscribed destination ports might still be active, so it would be wrong to send "all sounds off" and "reset controller" events to them. The proper place for such a shutdown would be the closing of the actual MIDI port (and close_substream() in rawmidi.c already can do this). This also fixes a deadlock when dummy_unuse() tries to send events to its own port that is already locked because it is being freed. Reported-by: NPeter Billam <peter@www.pjb.com.au> Cc: <stable@vger.kernel.org> Signed-off-by: NClemens Ladisch <clemens@ladisch.de> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 20 1月, 2015 21 次提交
-
-
由 TienFu Chen 提交于
On this machine we need to inform the driver where the docking station pins are, because it has not been set up by BIOS. Tested-by: NTienFu Chen <tienfu.chen@canonical.com> BugLink: https://bugs.launchpad.net/bugs/1412800Signed-off-by: NTienFu Chen <tienfu.chen@canonical.com> Signed-off-by: NDavid Henningsson <david.henningsson@canonical.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Chris Rorvick 提交于
The driver version string was removed in an ealier commit for being useless. These are equally useless. Signed-off-by: NChris Rorvick <chris@rorvick.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Chris Rorvick 提交于
The correct spelling includes the space. Fix this in strings and comments that refer to the manufacturer. Signed-off-by: NChris Rorvick <chris@rorvick.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Chris Rorvick 提交于
Signed-off-by: NChris Rorvick <chris@rorvick.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Both functions are used nowhere. Tested-by: NChris Rorvick <chris@rorvick.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
It's used only locally. Tested-by: NChris Rorvick <chris@rorvick.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Call line6_pcm_disconnect() at disconnect to make sure that all URBs are cleared. Also reduce the superfluous snd_pcm_stop() calls from the function (and remove the unused function) since the streams are guaranteed to be stopped at this point via snd_card_disconnect(). Tested-by: NChris Rorvick <chris@rorvick.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Calling line6_pcm_disconnect() at suspend callback is superfluous and rather confusing. Let's get rid of it. Tested-by: NChris Rorvick <chris@rorvick.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Such a macro doesn't improve readability. Tested-by: NChris Rorvick <chris@rorvick.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Such a debug is needed in the core code, not in each lowlevel driver. Tested-by: NChris Rorvick <chris@rorvick.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
This is rather useless for a driver that has been already merged into the official tree. Tested-by: NChris Rorvick <chris@rorvick.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
This is a fairly big rewrite regarding the card resource management in line6 drivers: - The card creation is moved into line6_probe(). This adds the global destructor to private_free, so that each driver doesn't have to call it any longer. - The USB disconnect callback handles the card release, thus each driver needs to concentrate on only its own resources. No need to snd_card_*() call in the destructor. - Fix the potential stall in disconnection by removing snd_card_free(). It's replaced with snd_card_free_when_closed() for asynchronous release. - The only remaining operation for the card in each driver is the call of snd_card_register(). All the rest are dealt in the common module by itself. - These ended up with removal of audio.[ch] as a result of a reduction of one layer. Each driver just needs to call line6_probe(). Tested-by: NChris Rorvick <chris@rorvick.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The PCM trigger callback is guaranteed to be called already in spinlock / irq-disabled context. Tested-by: NChris Rorvick <chris@rorvick.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Otherwise it oopses. Tested-by: NChris Rorvick <chris@rorvick.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Kernel already shows the error in the common path. Tested-by: NChris Rorvick <chris@rorvick.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
It's non-standard and rather superfluous. Tested-by: NChris Rorvick <chris@rorvick.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The line6 drivers don't support the full resume although they set SNDRV_PCM_INFO_RESUME. These flags have to be dropped to inform properly to the user-space. Also, drop the CONFIG_PM in trigger callbacks, too, which are rather superfluous. Tested-by: NChris Rorvick <chris@rorvick.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Like the previous fix for PCM, attach the card-specific resource into rawmidi->private_data instead of handling in a snd_device object. This simplifies the code and structure. Tested-by: NChris Rorvick <chris@rorvick.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Instead of handling the card-specific resource in snd_device, attach it into pcm->private_data and release it directly in private_free. This simplifies the code and structure. Tested-by: NChris Rorvick <chris@rorvick.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Instead of sysfs and the conditional build with Kconfig, implement the handling of the impulse response controls via control API, and always enable the build. Two new controls, "Impulse Response Volume" and "Impulse Response Period" are added as a replacement for the former sysfs files. Tested-by: NChris Rorvick <chris@rorvick.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Split to each individual driver for POD, PODHD, TonePort and Variax with a core LINE6 helper module. The new modules follow the standard ALSA naming rule with snd prefix: snd-usb-pod, snd-usb-podhd, snd-usb-toneport and snd-usb-variax, together with the corresponding CONFIG_SND_USB_* Kconfig items. Tested-by: NChris Rorvick <chris@rorvick.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 19 1月, 2015 16 次提交
-
-
由 Takashi Iwai 提交于
No functional change, refactoring with the standard helpers. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
No functional change, refactoring with the standard helpers. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
No functional change, refactoring with the standard helpers. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
No functional change, refactoring with the standard helpers. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
No functional change, refactoring with the standard helpers. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
No functional change, refactoring with the standard helpers. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
No functional change, refactoring with the standard helpers. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
No functional change, refactoring with the standard helpers. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
No functional change, refactoring with the standard helpers. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
No functional change, refactoring with the standard helpers. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
No functional change, refactoring with the standard helpers. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
No functional change, refactoring with the standard helpers. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
No functional change, refactoring with the standard helpers. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
No functional change, refactoring with the standard helpers. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
No functional change, refactoring with the standard helpers. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
No functional change, refactoring with the standard helpers. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-