- 02 12月, 2006 40 次提交
-
-
由 Alan Stern 提交于
The net2280 driver is too eager to send zero-length packets when IN tokens are received on ep0. No such packet should be sent (the driver should NAK) before the gadget driver has queued the proper response. Otherwise deferred responses are impossible. This patch (as823) makes net2280 avoid sending ZLPs for IN transfers on ep0 until a response has been submitted, and avoids stalling when an OUT packet is received before a request has been submitted for an OUT transfer on ep0. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Cc: David Brownell <david-b@pacbell.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
Possible memleak fix on error path. The changes: - out_kfree2 and out_free_urb replaced - missing scsi_host_put() added Here it goes: Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NOliver Neukum <oliver@neukum.name> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Jaco Kroon 提交于
The mass storage device from Digitech designed for Flash Cards, as found on (for example) the GNX4 device has issues with residue, similar to the bug report at http://kerneltrap.org/node/6297. This patch adds the faulty storage device to unusual_devs.h, this not only reduces the noise in dmesg but also increases the transfer speeds by a factor of 7x for me (89kB/s -> 637kB/s). T: Bus=02 Lev=02 Prnt=02 Port=01 Cnt=02 Dev#= 4 Spd=12 MxCh= 0 D: Ver= 1.10 Cls=00(>ifc ) Sub=00 Prot=00 MxPS=64 #Cfgs= 1 P: Vendor=1210 ProdID=0003 Rev= 1.00 S: Manufacturer=DigiTech HMG S: Product=DigiTech Mass Storage C:* #Ifs= 1 Cfg#= 1 Atr=c0 MxPwr= 0mA I: If#= 0 Alt= 0 #EPs= 2 Cls=08(stor.) Sub=06 Prot=50 Driver=usb-storage E: Ad=02(O) Atr=02(Bulk) MxPS= 64 Ivl=0ms E: Ad=82(I) Atr=02(Bulk) MxPS= 64 Ivl=0ms Signed-off-by: NJaco Kroon <jaco@kroon.co.za> Signed-off-by: NPhil Dibowitz <phil@ipom.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
This patch (as821) fixes a compiler warning when CONFIG_PM isn't on ("usb_autosuspend_work" defined but not used). Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Naranjo Manuel Francisco 提交于
> 2006/11/11, Adrian Bunk <bunk@stusta.de>: > > The Coverity checker spotted the following in > > drivers/usb/serial/aircable.c: > > > > <-- snip --> > > > > ... > > static void aircable_read(void *params) > > { > > ... Hi everyone, Sorry for the long time response but here is the patch, I think this way should work, if anyone has any suggestion let me know. What I do now is, in case I don't have the tty available I reschedule the work, I have tried it and it works with no problem, I even tried removing the device, and didn't find anything strange. Signed-off-by: NNaranjo Manuel <naranjo.manuel@gmail.com> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Alan Stern 提交于
All the other root-hub suspend or resume log messages, in ohci-hcd or any of the other host controller drivers, use the debug priority level. This patch (as815) makes the one single exception behave like all the rest. Signed-off-by: NAlan Stern <stern@rowland.harvard.edu> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
- usb_free_urb() cleanup - usb_kill_urb() cleanup Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
- usb_kill_urb() cleanup Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
- usb_kill_urb() cleanup Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
- usb_free_urb() cleanup Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
- usb_kill_urb() cleanup Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
- usb_free_urb() cleanup Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
- usb_kill_urb() cleanup Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
- usb_free_urb() cleanup Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
- usb_kill_urb() cleanup Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
- usb_free_urb() cleanup Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
- usb_kill_urb() cleanup Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
- usb_free_urb() cleanup Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
- usb_free_urb() cleanup Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
Hello, - usb_free_urb() cleanup - usb_kill_urb() cleanup Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
- usb_free_urb() cleanup - usb_kill_urb() cleanup Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
- usb_free_urb() cleanup Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
- usb_free_urb() cleanup Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
Hello, - usb_free_urb() cleanup Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
- usb_free_urb() cleanup Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
- usb_free_urb() cleanup Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
- usb_free_urb() cleanup Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
- usb_free_urb() cleanup Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
- usb_free_urb() cleanup Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
- usb_free_urb() cleanup Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
- usb_free_urb() cleanup Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
- usb_free_urb() cleanup Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
- usb_free_urb() cleanup - usb_unlink_urb() cleanup Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
- usb_free_urb() cleanup Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
- usb_free_urb() cleanup - usb_kill_urb() cleanup Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
- usb_free_urb() cleanup - usb_kill_urb() cleanup Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
- usb_free_urb() cleanup Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
- usb_free_urb() cleanup Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
Allright. As Greg KH suggested I split this big patch into smaller ones to make the changes easier to review. Having no better idea how to split that I split it on a 'patch per file' basis. All those patches clean redundant 'if' before usb_unlink/free/kill_urb(): if (urb) usb_free_urb(urb); /* unlink / free / kill */ I decided not to touch bigger 'if's like if (urb) { usb_kill_urb(urb); usb_free_urb(urb); urb = NULL; } as that would be probably too intrusive. One of patches also fixes drivers/usb/misc/auerswald.c memleak I found when digging the code. All those patches are against 2.6.19-rc4. Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-
由 Mariusz Kozlowski 提交于
We should free urbs starting at [i-1] not [i]. Signed-off-by: NMariusz Kozlowski <m.kozlowski@tuxland.pl> Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>
-