Modify the Scatter-Gather entry definitions for the Freescale
CAAM driver to include support for both 64- and 32-bit DMA pointers.
Signed-off-by: NVictoria Milhoan <vicki.milhoan@freescale.com>
Tested-by: NHoria Geantă <horia.geanta@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

ARM-based systems may disable clocking to the CAAM device on the
Freescale i.MX platform for power management purposes.  This patch
enables the required clocks when the CAAM module is initialized and
disables the required clocks when the CAAM module is shut down.
Signed-off-by: NVictoria Milhoan <vicki.milhoan@freescale.com>
Tested-by: NHoria Geantă <horia.geanta@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add set/clear 32-bit primitives for compatibility with ARM devices since
the primitives were previously only defined for the Power architecture.
Signed-off-by: NVictoria Milhoan <vicki.milhoan@freescale.com>
Tested-by: NHoria Geantă <horia.geanta@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Freescale i.MX6 ARM platforms do not support hardware cache coherency.
This patch adds cache coherency support to the CAAM driver.
Signed-off-by: NVictoria Milhoan <vicki.milhoan@freescale.com>
Tested-by: NHoria Geantă <horia.geanta@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch converts talitos to the new AEAD interface.  IV generation
has been removed since it's equivalent to a software implementation.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch converts qat to the new AEAD interface.  IV generation
has been removed since it's equivalent to a software implementation.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>
Tested-by: NTadeusz Struk <tadeusz.struk@intel.com>

This patch converts picoxcell to the new AEAD interface.  IV
generation has been removed since it's equivalent to a software
implementation.

As picoxcell cannot handle SG lists longer than 16 elements,
this patch has made the software fallback mandatory.  If an SG
list comes in that exceeds the limit, we will simply use the
fallback.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch converts ixp4xx to the new AEAD interface.  IV generation
has been removed since it's a purely software implementation.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch converts the authenc implementations in caam to the
new AEAD interface.  The biggest change is that seqiv no longer
generates a random IV.  Instead the IPsec sequence number is used
as the IV.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Compiling the talitos driver with my GCC 4.3.1 e500v2 cross-compiler
resulted in a failed build due to the anonymous union/structures
introduced in this commit:

  crypto: talitos - enhanced talitos_desc struct for SEC1

The build error was:

  drivers/crypto/talitos.h:56: error: unknown field 'len' specified in initializer
  drivers/crypto/talitos.h:56: warning: missing braces around initializer
  drivers/crypto/talitos.h:56: warning: (near initialization for 'zero_entry.<anonymous>')
  drivers/crypto/talitos.h:57: error: unknown field 'j_extent' specified in initializer
  drivers/crypto/talitos.h:58: error: unknown field 'eptr' specified in initializer
  drivers/crypto/talitos.h:58: warning: excess elements in struct initializer
  drivers/crypto/talitos.h:58: warning: (near initialization for 'zero_entry')
  make[2]: *** [drivers/crypto/talitos.o] Error 1
  make[1]: *** [drivers/crypto] Error 2
  make: *** [drivers] Error 2

This patch eliminates the errors by relying on the C standard's
implicit assignment of zero to static variables.
Signed-off-by: NAaron Sierra <asierra@xes-inc.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Trival change, fix spelling mistake 'aquire' -> 'acquire' in
dev_err message.
Signed-off-by: NColin Ian King <colin.king@canonical.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The encap shared descriptor was changed to use the new IV convention.
In the process some commands were shifted, making the output length
zero, caam effectively writing garbage in dst.

While here, update the decap descriptor to execute the "write" commands
before the "read"s (as it previously was).
This makes sure the input fifo is drained before becoming full.

Fixes: 46218750 ("crypto: caam - Use new IV convention")
Signed-off-by: NHoria Geant? <horia.geanta@freescale.com>
Signed-off-by: NTudor Ambarus <tudor.ambarus@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

One of the debug messages in the NX 842 PowerNV driver is missing
the required be32_to_cpu() wrapper when accessing the __be32 field
csb->count.  Add the wrapper so the message will show the correct count.
Signed-off-by: NDan Streetman <ddstreet@ieee.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Return success instead of error if compression succeeds but the output is
larger than the input.

It's unlikely that the caller will use the compressed data since it's
larger than the original uncompressed data, but there was no error and
returning an error code is incorrect.  Further, for testing small input
buffers, the output is likely to be larger than the input and success
needs to be returned to verify the test.
Signed-off-by: NDan Streetman <ddstreet@ieee.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

There's no need to iterate through the list for instances in the
accel_table since the number of devices is already known in this file.
Signed-off-by: NBruce Allan <bruce.w.allan@intel.com>
Signed-off-by: NTadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NAhsan Atta <ahsan.atta@intel.com>
Signed-off-by: NTadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Signed-off-by: NBruce Allan <bruce.w.allan@intel.com>
Signed-off-by: NTadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The subject macro mistakenly compares the passed-in ring size in bytes
with ADF_RING_SIZE_4K which is 0x6 (an internal representation of 4KB)
rather than comparing with the intended value of 4096.
Signed-off-by: NBruce Allan <bruce.w.allan@intel.com>
Signed-off-by: NTadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The element pci_dev_id in the struct adf_hw_device_data is redundant since
the PCI device id can be retrieved from the struct pci_dev.
Signed-off-by: NBruce Allan <bruce.w.allan@intel.com>
Signed-off-by: NTadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Remove the common 'platform' registration module, and move the crypto
compression driver registration into each of the pSeries and PowerNV
platform NX 842 drivers.  Change the nx-842.c code into simple common
functions that each platform driver uses to perform constraints-based
buffer changes, i.e. realigning and/or resizing buffers to match the
driver's hardware requirements.

The common 'platform' module was my mistake to create - since each
platform driver will only load/operate when running on its own
platform (i.e. a pSeries platform or a PowerNV platform), they can
directly register with the crypto subsystem, using the same alg and
driver name.  This removes unneeded complexity.
Signed-off-by: NDan Streetman <ddstreet@ieee.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The last commit merged nx-842.c's code into nx-842-crypto.c.  It
did not rename nx-842-crypto.c to nx-842.c, in order to let the
patch more clearly show what was merged.  This just renames
nx-842-crypto.c to nx-842.c, with no changes to its code.
Signed-off-by: NDan Streetman <ddstreet@ieee.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Merge the nx-842.c code into nx-842-crypto.c.

This allows later patches to remove the 'platform' driver, and instead
allow each platform driver to directly register with the crypto
compression api.
Signed-off-by: NDan Streetman <ddstreet@ieee.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Replace the duplicated finishing code (set destination buffer length and
set return code to 0) in the case of decompressing a buffer with no header
with a goto to the success case of decompressing a buffer with a header.

This is a trivial change that allows both success cases to use common code,
and includes the pr_debug() msg in both cases as well.
Signed-off-by: NDan Streetman <ddstreet@ieee.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Don't register the pSeries driver when parsing the device tree returns
ENODEV.

The nx842_probe() function in the pSeries driver returns error instead
of registering as a crypto compression driver, when it receives an
error return value from the nx842_OF_upd() function that probes the
device tree nodes, except when ENODEV is returned.  However ENODEV
should not be a special case and the driver should not register when
there is no hw device, or the hw device is disabled.
Signed-off-by: NDan Streetman <ddstreet@ieee.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Move the kzalloc() calls in nx842_probe() and nx842_OF_upd() to the top
of the functions, before taking the devdata spinlock.

Since kzalloc() without GFP_ATOMIC can sleep, it can't be called while
holding a spinlock.  Move the calls to before taking the lock.
Signed-off-by: NDan Streetman <ddstreet@ieee.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Remove the 'status' field from the pSeries NX driver data.

The 'status' field isn't used by the driver at all; it simply checks the
devicetree status node at initialization, and returns success if 'okay'
and failure otherwise.
Signed-off-by: NDan Streetman <ddstreet@ieee.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Remove the __init and __exit modifiers from the VIO driver probe and
remove functions.

The driver functions should not be marked __init/__exit because they
can/will be called during runtime, not only at module init and exit.
Signed-off-by: NDan Streetman <ddstreet@ieee.org>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

When multiple devices are present in the system the driver attempts
to register the same algorithm many times.

Changes in v2:
 - use proper synchronization mechanizm between register and unregister
Signed-off-by: NTadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch removes a bogus BUG_ON in the ablkcipher path that
triggers when the destination buffer is different from the source
buffer and is scattered.

Cc: stable@vger.kernel.org
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The synchronization method used atomic was bogus.
Use a proper synchronization with mutex.

Cc: stable@vger.kernel.org
Signed-off-by: NTadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

The condition checking allowed key length was invalid.
Reported-by: NDan Carpenter <dan.carpenter@oracle.com>
Signed-off-by: NTadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add support for the Security System included in Allwinner SoC A20.
The Security System is a hardware cryptographic accelerator that support:
- MD5 and SHA1 hash algorithms
- AES block cipher in CBC/ECB mode with 128/196/256bits keys.
- DES and 3DES block cipher in CBC/ECB mode
Signed-off-by: NLABBE Corentin <clabbe.montjoie@gmail.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

An implicit truncation is done when using a variable of 64 bits
in MATH command:

warning: large integer implicitly truncated to unsigned type [-Woverflow]

Silence the compiler by feeding it with an explicit truncated value.
Signed-off-by: NTudor Ambarus <tudor.ambarus@freescale.com>
Signed-off-by: NHoria Geant? <horia.geanta@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

When successful, the descriptor that performs RNG initialization
is allowed to return a status code of 7000_0000h, since last command
in the descriptor is a JUMP HALT.
Signed-off-by: NHoria Geant? <horia.geanta@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

HW coherency won't work properly for CAAM write transactions
if AWCACHE is left to default (POR) value - 4'b0001.
It has to be programmed to 4'b0010, i.e. AXI3 Cacheable bit set.

For platforms that have HW coherency support:
-PPC-based: the update has no effect; CAAM coherency already works
due to the IOMMU (PAMU) driver setting the correct memory coherency
attributes
-ARM-based: the update fixes cache coherency issues,
since IOMMU (SMMU) driver is not programmed to behave similar to PAMU
Signed-off-by: NHoria Geant? <horia.geanta@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

In order to ensure that the ERA property is properly read from DT
on all platforms, of_property_read* function needs to be used.
Signed-off-by: NAlex Porosanu <alexandru.porosanu@freescale.com>
Signed-off-by: NHoria Geant? <horia.geanta@freescale.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add RSA support to QAT driver.
Removed unused RNG rings.
Signed-off-by: NTadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Add code that loads the MMP firmware
Signed-off-by: NTadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

Load Modular Math Processor(MMP) firmware into QAT devices to support
public key algorithm acceleration.
Signed-off-by: NPingchao Yang <pingchao.yang@intel.com>
Signed-off-by: NTadeusz Struk <tadeusz.struk@intel.com>
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>

This patch converts the nx ccm and 4309 implementations to the
new AEAD interface.
Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au>