This changes adds the ShareAndWake and ExclusiveAndWake flags which
were added to the Irq, Interrupt, and Gpio resource descriptors
in ACPI 5.0.
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

This command was downreved and did not properly disassemble control
methods with any reasonable complexity. This fix brings the command
up to the same level as the rest of the disassembler.  Adds one
new file, dmdeferred.c, which is existing code that is now common
with the main disassembler and the debugger disassembl command.
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Tracing is no longer needed for many of the low-level function.
Removing the trace mechanism from these functions improves
performance a small amount, also simplifies the debug trace output.
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

This change greatly increases the performance of package objects
within the interpreter. It changes the processing of reference
counts for packages by optimizing for the most common case where
the package subobjects are either integers, strings, or buffers.
Increases the performance of the ASLTS test suite by 1.5X.
Chao Guan. ACPICA BZ 943.
https://www.acpica.org/bugzilla/show_bug.cgi?id=943Signed-off-by: NChao Guan <chao.guan@intel.com>
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Ensure cleanup after a memory allocation failure in dsmethod.c.
Original Linux change from Jesper Juhl.
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Signed-off-by: NBob Moore <robert.moore@intel.com>
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

This patch decreases 18 lines of 20121018 divergence.diff.

This patch updates initialization codes as they are already been updated in
ACPICA. This can also help to reduce source code differences between Linux
and ACPICA.
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

This patch decreases 29 lines of 20121018 divergence.diff.

This patch updates error messages that already have been enhanced in
ACPICA. This patch can also help to reduce the source code differences
between Linux and ACPICA.
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

This patch does not affect the generation of the Linux binary.
This patch decreases 26 lines of 20121018 divergence.diff.

The ACPICA uses a call depth tracing mechanism by wrapping the return
statements with return macros and marking the entrance with
ACPI_FUNCTION_TRACE_ macros. There are other ACPI_FUNCTION_ macros used
to mark the functions not using this tracing mechanism.

This patch fixes broken call depth tracing logic.
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

This is a cosmetic patch only. Comparison of the resulting binary showed
only line number differences.

This patch does not affect the generation of the Linux binary.
This patch decreases 314 lines of 20121018 divergence.diff.

ACPICA core uses ()'s on return statements. This is a known and committed
differences from Linux standard coding style.

This patch cleans up the Linux side ACPICA code to use this codying style
in order to reduce the source code differences between Linux and ACPICA.
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

This is a cosmetic patch only. Comparison of the resulting binary showed
only line number differences.

This patch does not affect the generation of the Linux binary.
This patch decreases 210 lines of 20121018 divergence.diff.

The ACPICA source codes uses a totally different indentation style from the
Linux to be compatible with other users (operating systems or BIOS).

Indentation differences are critical to the release automation. There are
two causes related to the "indentation" that are affecting the release
automation:
1. The ACPICA -> Linux release process is:
     ACPICA source -- acpisrc - hierarchy - indent ->
     linuxized ACPICA source -- diff ->
     linuxized ACPICA patch (x) -- human intervention ->
     linuxized ACPICA patch (o)
     Where
       'x' means "cannot be directly applied to the Linux"
       'o' means "can be directly applied to the Linux"
   Different "indent" version or "indent" options used in the "indent"
   step will lead to different divergences.
   The version of "indent" used for the current release process is:
     GNU indent 2.2.11
   The options of "indent" used for the current release process is:
     -npro -kr -i8 -ts8 -sob -l80 -ss -ncs
2. Manual indentation prettifying work in the Linux side will also harm the
   automatically generated linuxized ACPICA patches, making them impossible
   to apply directly.

This patch fixes source code differences caused by the two causes so that
the "human intervention" can be reduced in the future.
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

This is a cosmetic patch only. Comparison of the resulting binary showed
only line number differences.

This patch does not affect the generation of the Linux binary.
This patch decreases 389 lines of 20121018 divergence.diff.

This patch reduces source code diff caused by the simple code maintenance
work:
1. Deletion of the unused include files.
2. Deletion of the deprecated codes blocks.
3. Repositioning of the code blocks.
4. Replacing the values with the well defined macros.
5. Replacing the types with the equivalent types.
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

This is a cosmetic patch only. Comparison of the resulting binary showed
only line number differences.

This patch does not affect the generation of the Linux binary.
This patch decreases 170 lines of 20121018 divergence.diff.

This patch updates ACPICA codes surrounded by some disabled build options
so that the source code diff between Linux and ACPICA can be reduced.

Some of these build options may never be used in the kernel, so they may
be deleted entirely in future patches.
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

This is a cosmetic patch only. Comparison of the resulting binary showed
only line number differences.

This patch does not affect the generation of the Linux binary.
This patch decreases 558 lines of 20121018 divergence.diff.

This patch reduces the source code diff between Linux and ACPICA by
cleaning the comments that already have been updated in ACPICA.

There is no extra indentation done in this patch. Even the empty line
deletions and insertions are also splitted into another cleanup patch so
that this patch can be easily reviewed, and the binary differences can be
held to a lowest level.
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

At one point acpi_device_set_id() checks if acpi_device_hid(device)
returns NULL, but that never happens, so system bus devices with an
empty list of PNP IDs are given the dummy HID ("device") instead of
the "system bus HID" ("LNXSYBUS").  Fix the code to use the right
check.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Cc: <stable@vger.kernel.org>

After commit 71fbad6c (PCI/ACPI: Notify PCI devices when their power
resource is turned on) made acpi_pci_bind() call
acpi_power_resource_register_device(), the debug message at the end
of the latter appears in the kernel log for every PCI device that
doesn't happen to have power resources assigned (which is the vast
majority of them).  However, this message is totally useless, because
it doesn't even say which device it is about.  Moreover, it is
misleading, because it only means that the given device has no power
resources, which isn't exceptional at all.

Remove that useless message altogether and simplify
acpi_power_resource_register_device() slightly.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Currently these DBG statements are emitted at KERN_DEFAULT.
Change the macro to emit at KERN_DEBUG.

This can help avoid unexpected message interleaving.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Since the return value of acpi_bus_get_device() is not of type
acpi_status, ACPI_SUCCESS() should not be used for checking its
return value.  Fix that.
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: NMika Westerberg <mika.westerberg@linux.intel.com>

When memory hotadd, acpi_memory_enable_device has already been done
at drv->ops.add (acpi_memory_device_add), no need to do it again
at notify callback.

At acpi_memory_enable_device, acpi_memory_get_device_resources
is also a redundant action, since it has been done at drv->ops.add.
Signed-off-by: NLiu Jinsong <jinsong.liu@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

If the persistent store is empty initially, the function 'erst_dbg_read'
returns a nonzero value. The better way is to return a zero indicating the
read operation reaches EOF.

Tested on two different servers.
Signed-off-by: NAdrian Huang <adrian.huang@hp.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The mini-C library implementation is used by the embedded ACPICA users
other than Linux.  It was added to the kernel source to make it easier
to incorporate future ACPICA changes, but as it turns our we can avoid
carrying it thanks to some ACPICA release process tweaks, so remove
drivers/acpi/acpica/utclib.c from the kernel source tree.

[rjw: Modified the changelog slightly.]
Signed-off-by: NLv Zheng <lv.zheng@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

All devices behind Haswell LPSS (Low Power Subsystem) should be represented
as platform devices so add them to the acpi_platform_device_ids list.
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

To handle error trigger table correctly, memory region must be
removed from request region. We had a series of patches to do this
culminating in:
	commit b4e008dc
	ACPI, APEI, EINJ, Refine the fix of resource conflict

but when ACPI5 support was added, we missed updating this area. So
when using EINJ table on an ACPI5 enabled machine, we get following error:

APEI: Can not request [mem 0x526b80000-0x526b80007] for APEI EINJ
Trigger registers

Fix this by checking for the acpi5 case and using the same code
that was added earlier.
Signed-off-by: NChen Gong <gong.chen@linux.intel.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Or else the laptop will boot with a dimmed screen.

References: https://bugzilla.kernel.org/show_bug.cgi?id=51141Tested-by: NStefan Nagy <public@stefan-nagy.at>
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

When system enters power off, the _PSW of Lid device is enabled.
But this may cause the system to reboot instead of power off.

A proper way to fix this is to always disable lid wakeup capability for S5.

References: https://bugzilla.kernel.org/show_bug.cgi?id=35262Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The ACPI video driver can't control backlight correctly on
Asus UL30VT.  Vendor driver (asus-laptop) can work.  This patch is to
add "Asus UL30VT" to ACPI video detect blacklist in order to use
asus-laptop for video control on the "Asus UL30VT" rather than ACPI
video driver.

References: https://bugzilla.kernel.org/show_bug.cgi?id=32592Reported-by: NAlex Williamson <alex.williamson@redhat.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NLan Tianyu <tianyu.lan@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The current acpisleep DMI checks only run when CONFIG_SUSPEND is set.
And this may break hibernation on some platforms when CONFIG_SUSPEND
is cleared.

Move acpisleep DMI check into #ifdef CONFIG_ACPI_SLEEP instead.

[rjw: Added acpi_sleep_dmi_check() and rebased on top of earlier
 patches adding entries to acpisleep_dmi_table[].]
References: https://bugzilla.kernel.org/show_bug.cgi?id=45921Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Cc: <stable@vger.kernel.org>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

CONFIG_HOTPLUG is going away as an option so __devinit is no longer
needed.
Signed-off-by: NBill Pemberton <wfp5p@virginia.edu>
Acked-by: NRafael J. Wysocki <rjw@sisk.pl>
Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>

On some platforms, _TMP and _CRT/_HOT/_PSV/_ACx have dependency.
And there is no way for OS to detect this dependency.

commit 9bcb8118 shows us a problem
that _TMP must be evaluate after _CRT/_HOT/_PSV/_ACx, or else
firmware will shutdown the system.

But the machine in https://bugzilla.kernel.org/show_bug.cgi?id=43284
shows us that _PSV would return valid value only if _TMP has been
evaluated once.

With this patch, all of the control methods will be evaluated once,
in the _CRT/_HOT/_PSV/_CRT/_TMP order, before they are actually used.

[rjw: Added a local variable for the handle and modified the loop
 slightly.]
Signed-off-by: NZhang Rui <rui.zhang@intel.com>
Tested-by: Nkatabami <katabami@lavabit.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Many cpuidle drivers measure their time spent in an idle state by
reading the wallclock time before and after idling and calculating the
difference. This leads to erroneous results when the wallclock time gets
updated by another processor in the meantime, adding that clock
adjustment to the idle state's time counter.

If the clock adjustment was negative, the result is even worse due to an
erroneous cast from int to unsigned long long of the last_residency
variable. The negative 32 bit integer will zero-extend and result in a
forward time jump of roughly four billion milliseconds or 1.3 hours on
the idle state residency counter.

This patch changes all affected cpuidle drivers to either use the
monotonic clock for their measurements or make use of the generic time
measurement wrapper in cpuidle.c, which was already working correctly.
Some superfluous CLIs/STIs in the ACPI code are removed (interrupts
should always already be disabled before entering the idle function, and
not get reenabled until the generic wrapper has performed its second
measurement). It also removes the erroneous cast, making sure that
negative residency values are applied correctly even though they should
not appear anymore.
Signed-off-by: NJulius Werner <jwerner@chromium.org>
Reviewed-by: NPreeti U Murthy <preeti@linux.vnet.ibm.com>
Tested-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: NDaniel Lezcano <daniel.lezcano@linaro.org>
Acked-by: NLen Brown <len.brown@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

There is no need to initialize the node before appending it to the list.
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Reviewed-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The internal.h declares the acpi_create_platform_device(). Without
that include we get a following warning:

drivers/acpi/acpi_platform.c:133:24: warning: symbol 'acpi_create_platform_device' was not declared. Should it be static?
Signed-off-by: NAndy Shevchenko <andriy.shevchenko@linux.intel.com>
Acked-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

[Issue]

Currently, a variable name, which identifies each entry, consists of type, id and ctime.
But if multiple events happens in a short time, a second/third event may fail to log because
efi_pstore can't distinguish each event with current variable name.

[Solution]

A reasonable way to identify all events precisely is introducing a sequence counter to
the variable name.

The sequence counter has already supported in a pstore layer with "oopscount".
So, this patch adds it to a variable name.
Also, it is passed to read/erase callbacks of platform drivers in accordance with
the modification of the variable name.

  <before applying this patch>
 a variable name of first event: dump-type0-1-12345678
 a variable name of second event: dump-type0-1-12345678

  type:0
  id:1
  ctime:12345678

 If multiple events happen in a short time, efi_pstore can't distinguish them because
 variable names are same among them.

  <after applying this patch>

 it can be distinguishable by adding a sequence counter as follows.

 a variable name of first event: dump-type0-1-1-12345678
 a variable name of Second event: dump-type0-1-2-12345678

  type:0
  id:1
  sequence counter: 1(first event), 2(second event)
  ctime:12345678

In case of a write callback executed in pstore_console_write(), "0" is added to
an argument of the write callback because it just logs all kernel messages and
doesn't need to care about multiple events.
Signed-off-by: NSeiji Aguchi <seiji.aguchi@hds.com>
Acked-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Acked-by: NMike Waychison <mikew@google.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

[Issue]

Currently, a variable name, which is used to identify each log entry, consists of type,
id and ctime. But an erase callback does not use ctime.

If efi_pstore supported just one log, type and id were enough.
However, in case of supporting multiple logs, it doesn't work because
it can't distinguish each entry without ctime at erasing time.

 <Example>

 As you can see below, efi_pstore can't differentiate first event from second one without ctime.

 a variable name of first event: dump-type0-1-12345678
 a variable name of second event: dump-type0-1-23456789

  type:0
  id:1
  ctime:12345678, 23456789

[Solution]

This patch adds ctime to an argument of an erase callback.

It works across reboots because ctime of pstore means the date that the record was originally stored.
To do this, efi_pstore saves the ctime to variable name at writing time and passes it to pstore
at reading time.
Signed-off-by: NSeiji Aguchi <seiji.aguchi@hds.com>
Acked-by: NMike Waychison <mikew@google.com>
Signed-off-by: NTony Luck <tony.luck@intel.com>

Make it possible to ask the routines used for adding/removing devices
to/from the general ACPI PM domain, acpi_dev_pm_attach() and
acpi_dev_pm_detach(), respectively, to change the power states of
devices so that they are put into the full-power state automatically
by acpi_dev_pm_attach() and into the lowest-power state available
automatically by acpi_dev_pm_detach().
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
Reviewed-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Tested-by: NMika Westerberg <mika.westerberg@linux.intel.com>

Add the generic ACPI SDHCI device ID to acpi_platform_device_ids[]
to make the ACPI core create a platform device object for the ACPI
device node of that ID.

[rjw: Added the changelog.]
Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com>
Reviewed-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

ACPI 5 introduced I2cSerialBus resource that makes it possible to enumerate
and configure the I2C slave devices behind the I2C controller. This patch
adds helper functions to support I2C slave enumeration.

An ACPI enabled I2C controller driver only needs to call acpi_i2c_register_devices()
in order to get its slave devices enumerated, created and bound to the
corresponding ACPI handle.
Signed-off-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

The LEN variable is unsigned, therefore checking whether it is less than 0 is
useless. Also drop the LEN variable, since the COUNT parameter can be used
instead.

[rjw: Changed the subject.]
Signed-off-by: NCyril Roelandt <tipecaml@gmail.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Work around a defect in the printk subsystem introduced by a
logging change.
Signed-off-by: NJoe Perches <joe@perches.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Currently we have valid flag to represent if this ACPI device power
state is valid. A device power state is valid does not necessarily
mean we, as OSPM, has a mean to put the device into that power state,
e.g. D3 cold is always a valid power state for any ACPI device, but if
there is no _PS3 or _PRx for this device, we can't really put that
device into D3 cold power state. The same is true for D0 power state.

So here comes the os_accessible flag, which is only set if the device
has provided us the required means to put it into that power state,
e.g. if we have _PS3 or _PRx, we can put the device into D3 cold state
and thus, D3 cold power state's os_accessible flag will be set in this
case.

And a new wrapper inline function is added to be used to check if
firmware has provided us a way to power off the device during runtime.
Signed-off-by: NAaron Lu <aaron.lu@intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>

Updated Dock hotplug error messages with acpi_handle_<level>()
and pr_<level>().  Replaced acpi_get_name() & kfree() with
apci_handle_<level>().  Added error status to the messages where
needed.
Signed-off-by: NToshi Kani <toshi.kani@hp.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>