Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: Ben Collins <bcollins@debian.org>
Cc: Jody McIntyre <scjody@modernduck.com>
Cc: Stefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This is Adam's pnp probing fix.  It's been reported to fix hangs on several
people's machines.  I don't know if it's official or final, and Adam isn't
contactable at present.  But I'm not aware of the patch causing any
regressions.
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Some "inline" removing that Andrew suggested, removed some locking on
add/remove at this level - we'll let the callees decide.
Signed-off-by: NPatrick Gefre <pfg@sgi.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The RedBoot boot loader writes flash partition tables containing native
byte sex 32 bit values.  When booting an opposite byte sex kernel (e.g.  an
LE kernel from BE RedBoot) the current MTD driver fails to handle the
partition table and therefore is unable to generate the correct partition
map for the flash.

So far as I am aware this problem is ARM specific, because only ARM
supports software change of the CPU (memory system) byte sex, however the
partition table parsing is in generic MTD code.  The patch below has been
tested on NSLU2 (an IXP4XX based system) with a patch,
10-ixp4xx-copy-from.patch (submitted to linux-arm-kernel - it's ARM
specific) required to make the maps/ixp4xx.c driver work with an LE kernel.

Builds of the patched system are in the 'unstable' release of OpenSlug and
UcSlugC available from www.nslu2-linux.org.  These builds are BE, the
archives at www.nslu2-linux.org and www.handhelds.org (see
monotone.vanille.de) can be built LE (currently DISTRO targets
nslu-ltu.conf for LE thumb uclibc (32 bit kernel) and nslu2-lau.conf,
nslu2-lag.conf for LE arm uclibc/glibc) and this patch has been tested
extensively will both BE and LE systems on the NSLU2 (including swapping
between BE and LE by reflashing from both RedBoot and Linux).

The patch recognises that the FIS directory (the partition table) is
byte-reversed by examining the partition table size, which is known to be
one erase block (this is an assumption made elsewhere in redboot.c).  If
the size matches the erase block after byte swapping the value then
byte-reversal is assumed, if not no further action is taken.  The patched
code is fail safe; should redboot.c be changed to support a partition table
with a modified size field the test will fail and the partition table will
be assumed to have the host byte sex.

If byte-reversal is detected the patch byte swaps the remainder of the 32
bit fields in the copy of the table; this copy is then used to set up the
MTD partition map.
Signed-off-by: NJohn Bowler <jbowler@acm.org>
Cc: David Woodhouse <dwmw2@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Martin Michlmayr <tbm@cyrius.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch adds a bunch of new device IDs to the ftdi_sio driver for
various devices from microHAM using FTDI chips.

Micheal Studer supplied the PID for the USB-Y9 device.  I examined the
INF file in microHAM's Windows driver package for the USB-KW, USB-YS,
USB-IC, USB-DB9 and USB-RS232 devices.
Signed-off-by: NIan Abbott <abbotti@mev.co.uk>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Added the USB vendorID of GSPDA and the productID of GSPDA's palm
smartphone 'xplore m68' to the list of known devices.
Signed-off-by: NHendrik Schweppe <linuxkpatch@hendrik.fam-schweppe.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Remote NDIS response to OID_GEN_SUPPORTED_LIST only allocated space
for the data attached to the reply, and not the reply structure
itself. This caused other kmalloc'd memory to be corrupted.
Signed-off-by: NShaun Tancheff <shaun@tancheff.com>
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

There is a dead lock in lh7a40x udc driver. When the driver receive a
SET_FEATURE HALT request, the dev lock is taken by the interrupt
handler lh7a40x_udc_irq then the handler will call lh7a40x_set_halt
function which in its turn will try to acquire the dev lock.
Signed-off-by: NFranck Bui-Huu <franck.bui-huu@innova-card.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch (as656) adds an unusual_devs.h entry for the Lyra RCA RD1080
MP3 player.  Its card-reader firmware has the common
report-one-too-many-sectors bug.  This fixes Novell bug #152175.
Signed-off-by: NAlan Stern <stern@rowland.harvard.edu>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

This patch is for the Dual USB Joypad [0925:8866] from Wisegroup.  The
HID_QUIRK_NOGET is necessary for it to respond to input, and the
HID_QUIRK_MULTI_INPUT is necessary to have two js# nodes appear.
Signed-off-by: NAndrew Fuller <mactalla.obair@gmail.com>
Cc: "Dmitry Torokhov" <dmitry.torokhov@gmail.com>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

Fix http://bugzilla.kernel.org/show_bug.cgi?id=6128

Finish morphing the "early handoff" version of the EHCI BIOS handshake over
to match the previous implementation inside the EHCI driver (except that
now we forcibly disable the SMI).  The version that had been with the PCI
code was surprisingly full of bugs.
Signed-off-by: NDavid Brownell <dbrownell@users.sourceforge.net>
Cc: <yazar256@gmail.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NGreg Kroah-Hartman <gregkh@suse.de>

The caller takes the UART port lock, so we shouldn't try
to take it again.
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Until problems are sorted.

Some Sun parts don't have PCI_VENDOR_ID_SUN in the subsystem
vendor ID.  So add another fallback test, which is the name
of the OBP firmware device tree node.  If it's a Sun part we'll
get "network", else it will be named "ethernet".
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With the latest kernels, I experienced some strange corruption, some
'*****' being randomly inserted in the character flow, like this:

	ashes:~#
	ashes:~#
	a*******shes:~#
	ashes:~#
	ashes:~#

Further investigation shows that the problem was introduced during
Alan's "TTY layer buffering revamp" patch, the amount of data to be
copied being reduced after buffer allocation.  Moving the count fixup
around solves the problem.
Signed-off-by: NMarc Zyngier <maz@misterjones.org>
Approved-by: NRogier Wolff <R.E.Wolff@BitWizard.nl>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

ACPI is initialized very early on x86-64, before the DMI code is
initialized.  This means it would often discover a 0 year and then turn
off ACPI because it thought the BIOS was too old.  Some systems don't
boot without ACPI so this was a problem.

I have a full fix by adding new very early DMI detection, but it needs
more testing before it can be merged.  For 2.6.16 let's just turn the
check off.  It never made much sense anyways because there are no x86-64
systems older than 2002 or so and they generally all have working ACPI.

Cc: len.brown@intel.com
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This makes x86-64 use the common X86_PM_TIMER Kconfig entry in drivers/acpi

And since PM timer is needed for correct timing on a lot of systems
now (e.g. AMD dual cores) and we often get bug reports from people
who forgot to set it make it depend on CONFIG_EMBEDDED. x86-64 had
this change before and it's a good thing.

I also fixed the description slightly to make this more clear.

Cc: len.brown@intel.com
Signed-off-by: NAndi Kleen <ak@suse.de>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

As the (probably) last user of a Specialix SI board, I noticed that
recent kernels would fail to probe the sucker.  Quick investigation
indicate a few missing braces...

I left the double probing in place, as it looks like it's been here
forever.
Signed-off-by: NMarc Zyngier <maz@misterjones.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

There's a problem in sd where we blindly believe the length of the
headers and block descriptors.  Some devices return insane values for
these and cause our length to end up greater than the actual buffer
size, so check to make sure.
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>

Also removed the buffer size magic number (512) and added DPOFUA of
zero to the defaults
Signed-off-by: NJames Bottomley <James.Bottomley@SteelEye.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix two bugs in the WoL implementation of sis900. The first causes
hangs on some system on driver load, the second causes troubles
when disabling WoL support.  Both fixes are one liner and really
simple.
Signed-off-by: NLennert Buytenhek <buytenh@wantstofly.org>
Signed-off-by: NDaniele Venzano <venza@brownhat.org>

Silicon Image has disclosed a new sil3114/3152 errata and workaround
which causes the controller to return R_ERR on DMA activate FIS if the
FIS is received while the next PRD is being fetched.  This patch
implements the workaround.

This errata results in lock up and doesn't trigger if m15w workaround
is in effect.  We stopped applying m15w to 3512 and 3114 in 2.6.14-rc1
which makes 3512/3114 lock up with some drives on all kernel versions
since 2.6.14-rc1 upto now (2.6.16-rc4).  This patch should fix the
regression.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

3512 is slightly different from 3112 errata-wise.  Differentiate it.
Signed-off-by: NTejun Heo <htejun@gmail.com>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

Minor number should be freed after del_gendisk().  Otherwise, there could
be a window where 2 registered gendisk has same minor number.
Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Acked-by: NAlasdair G Kergon <agk@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Need to unfreeze and release bdev otherwise the bdev inode with
inconsistent state is reused later and cause problem.
Signed-off-by: NJun'ichi Nomura <j-nomura@ce.jp.nec.com>
Acked-by: NAlasdair G Kergon <agk@redhat.com>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The setcolreg function will attempt to write 24 color entries to the
pseudo_pallette.  However, the pseudo_palette has only space for 16 entries.

Thanks to Atsushi Nemoto for reporting this bug.
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Replaced the no longer existing io_remap_page_range() routine with the
io_remap_pfn_range() routine.  Did not have a chance yet to test the
functionality of the driver, but at least the kernel compiles cleanly again.
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Allocating more than 4 MB memory for the GBE (SGI O2) framebuffer completely
breakfs gbefb support at the moment.  According to comments on #mipslinux,
more than 4 MB has never worked correctly in Linux.  Therefore, the default
should be 4 MB.
Signed-off-by: NMartin Michlmayr <tbm@cyrius.com>
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The gbefb driver does not update the framebuffer layers visual setting when
depth is changed with fbset, resulting in strange colors (very dark blue in
16-bit, almost black in 24-bit).
Signed-off-by: NKaj-Michael Lang <milang@tal.org>
Signed-off-by: NMartin Michlmayr <tbm@cyrius.com>
Signed-off-by: NAntonino Daplas <adaplas@pol.net>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix a kernel oops for Intel P30 flashes, where the wait queue head was not
initialized for the flchip struct, which in turn caused a crash at the
first read operation.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: <stable@kernel.org>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

EGA boards suck: they mostly have write-only registers.  This is
particularly problematic for the overflow register: for being able to write
to it, we would have to handle vertical sync & such too, which (I'd say)
would potentially break a lot of configurations.  Instead, just disabling
vertical resize for EGA boards is just nice enough (horizontal resize still
works).

Fixes http://bugzilla.kernel.org/show_bug.cgi?id=6106Signed-off-by: NSamuel Thibault <samuel.thibault@ens-lyon.org>
Cc: Rafal Olearski <olearski@mail2.kim.net.pl>
Cc: "Antonino A. Daplas" <adaplas@pol.net>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

drivers/net/tlan.c compiles with CONFIG_PCI=n only with a warning and
due to the dead code elimination of gcc.

Additionally, this fixes the only compile error I found with
CONFIG_PCI=n and the gcc -Werror-implicit-function-declaration
flag on i386.
Signed-off-by: NAdrian Bunk <bunk@stusta.de>
Signed-off-by: NJeff Garzik <jeff@garzik.org>

tty_schedule_flip() would schedule a thread that would call flush_to_ldisc().
If tty_buffer_request_room() gets called prior to that thread running --
which is likely in this loop in hvc_poll(), it would set the active flag
in the tty buffer and consequently flush_to_ldisc() would ignore it.

The result is that input on the hvc console is not processed.

This fix calls tty_flip_buffer_push (and flags the tty as
"low_latency").  The push to the ldisc thus happens synchronously.
Signed-off-by: NMichal Ostrowski <mostrows@watson.ibm.com>
Signed-off-by: NPaul Mackerras <paulus@samba.org>

The most usable number of ifb devices is 2. Change the default to 2.
Signed-off-by: NRichard Lucassen <spamtrap@lucassen.org>
Signed-off-by: NJamal Hadi Salim <hadi@cyberus.ca>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There is a race between updating the irq mask and setting it
which can be triggered on SMP with a bad cable.
Similar patch from Ingo Molnar and Thomas Gleixner
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>

The SysKonnect Genesis based board would fail on initialization
with phy_read errors caused by not waiting for last phy write.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>

Fix a race in the receive NAPI, irq handling. The interrupt clear and the
start need to be separated.  Otherwise there is a window between the last
frame received and the NAPI done level handling.
Signed-off-by: NStephen Hemminger <shemminger@osdl.org>

Similar to 8139cp code but more inspired/lucky.
Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com>

rtl8169_hw_start() requires that the descriptor ring indexes be
set to zero. Let a deferred invocation of rtl8169_reset_task()
handle it. Enabling a few power management bits will not hurt
either.

suspend/resume is issued with irq on: the spinlock do not need
to save the irq flag.
Signed-off-by: NFrancois Romieu <romieu@fr.zoreil.com>

early_serial_setup() must not be called after console initialisation.
Add a comment prior to the function explicitly stating this.
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>

Since about Linux 2.6.14, sbp2's inquiry workaround did not work anymore
due to changes in the SCSI layer. Update it to become effective again.
Testing one of the two known affected bridges has shown that skip_ms_page_8
is required as well.

Also, make force_inquiry_hack tunable via /sys/module/sbp2/parameters.
Signed-off-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Signed-off-by: NJody McIntyre <scjody@modernduck.com>
(cherry picked from 99496037c6744fd938ffb8ccfc8fc91762322ff8 commit)