- 17 11月, 2011 3 次提交
-
-
由 Christian Borntraeger 提交于
There is a potential host deadlock in the tprot intercept handling. We must not hold the mmap semaphore while resolving the guest address. If userspace is remapping, then the memory detection in the guest is broken anyway so we can safely separate the address translation from walking the vmas. Signed-off-by: NChristian Borntraeger <borntraeger@de.ibm.com> Signed-off-by: NCarsten Otte <cotte@de.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Cornelia Huck 提交于
SIGP sense running may cause an intercept on higher level virtualization, so handle it by checking the CPUSTAT_RUNNING flag. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NCarsten Otte <cotte@de.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
由 Cornelia Huck 提交于
CPUSTAT_RUNNING was implemented signifying that a vcpu is not stopped. This is not, however, what the architecture says: RUNNING should be set when the host is acting on the behalf of the guest operating system. CPUSTAT_RUNNING has been changed to be set in kvm_arch_vcpu_load() and to be unset in kvm_arch_vcpu_put(). For signifying stopped state of a vcpu, a host-controlled bit has been used and is set/unset basically on the reverse as the old CPUSTAT_RUNNING bit (including pushing it down into stop handling proper in handle_stop()). Cc: stable@kernel.org Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NCarsten Otte <cotte@de.ibm.com> Signed-off-by: NAvi Kivity <avi@redhat.com>
-
- 13 11月, 2011 1 次提交
-
-
由 Rafael J. Wysocki 提交于
After commit e978aa7d ("cpuidle: Move dev->last_residency update to driver enter routine; remove dev->last_state") setting acpi_idle_suspend to 1 by acpi_processor_suspend() causes the ACPI cpuidle routines to return error codes continuously, which in turn causes cpuidle to lock up (hard). However, acpi_idle_suspend doesn't appear to be useful for any particular purpose (it's racy and doesn't really provide any real protection), so it can be removed, which makes the problem go away. Reported-and-tested-by: NTomas M. <tmezzadra@gmail.com> Reported-and-tested-by: NFerenc Wagner <wferi@niif.hu> Tested-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NRafael J. Wysocki <rjw@sisk.pl> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
- 12 11月, 2011 17 次提交
-
-
git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc由 Linus Torvalds 提交于
* 'fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/arm/arm-soc: arm/imx: fix imx6q mmc error when mounting rootfs arm/imx: fix AUTO_ZRELADDR selection arm/imx: fix the references to ARCH_MX3 ARM: mx51/53: set pwm clock parent to ipg_perclk arm/tegra: enable headphone detection gpio on seaboard arm/dt: Fix ventana SDHCI power-gpios arm/tegra: Don't create duplicate gpio and pinmux devices ARM: at91: Fix USBA gadget registration atmel/spi: fix missing probe at91/yl-9200: Fix section mismatch at91: vmalloc fix missing AT91_VIRT_BASE define ARM: at91: usart: drop static map regs for dbgu ARM: picoxcell: add extra temp register to addruart ARM: msm: fix compilation flags for MSM_SCM arm/mxs: fix mmc device adding for mach-mx28evk ARM: mxc: Remove test_for_ltirq ARM:i.MX: fix build error in clock-mx51-mx53.c ARM:i.MX: fix build error in tzic/avic.c ARM: mxc: fix local timer interrupt handling msm: boards: Fix fallout from removal of machine_desc in fixup
-
由 Axel Lin 提交于
The variable i is removed by commit ded84337 "[CPUFREQ] db8500: remove unneeded for loop iteration over freq_table", but current code to print available frequencies still uses the i variable. Thus add the i variable back to fix below buld error: CC drivers/cpufreq/db8500-cpufreq.o drivers/cpufreq/db8500-cpufreq.c: In function 'db8500_cpufreq_init': drivers/cpufreq/db8500-cpufreq.c:123: error: 'i' undeclared (first use in this function) drivers/cpufreq/db8500-cpufreq.c:123: error: (Each undeclared identifier is reported only once drivers/cpufreq/db8500-cpufreq.c:123: error: for each function it appears in.) make[2]: *** [drivers/cpufreq/db8500-cpufreq.o] Error 1 make[1]: *** [drivers/cpufreq] Error 2 make: *** [drivers] Error 2 This patch also fixes using uninitialized i variable as array index. Signed-off-by: NAxel Lin <axel.lin@gmail.com> Acked-by: NLinus Walleij <linus.walleij@linaro.org> Signed-off-by: NDave Jones <davej@redhat.com>
-
git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/geert/linux-m68k: (29 commits) m68k/mac: Remove mac_irq_{en,dis}able() wrappers m68k/irq: Remove obsolete support for user vector interrupt fixups m68k/irq: Remove obsolete m68k irq framework m68k/q40: Convert Q40/Q60 to genirq m68k/sun3: Convert Sun3/3x to genirq m68k/sun3: Use the kstat_irqs_cpu() wrapper m68k/apollo: Convert Apollo to genirq m68k/vme: Convert VME to genirq m68k/hp300: Convert HP9000/300 and HP9000/400 to genirq m68k/mac: Optimize interrupts using chain handlers m68k/mac: Convert Mac to genirq m68k/amiga: Optimize interrupts using chain handlers m68k/amiga: Convert Amiga to genirq m68k/amiga: Refactor amiints.c m68k/atari: Remove code and comments about different irq types m68k/atari: Convert Atari to genirq m68k/irq: Add genirq support m68k/irq: Remove obsolete IRQ_FLG_* users m68k/irq: Rename {,__}m68k_handle_int() m68k/irq: Add m68k_setup_irq_controller() ...
-
git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media由 Linus Torvalds 提交于
* 'v4l_for_linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media: [media] v4l2-ctrl: Send change events to all fh for auto cluster slave controls [media] v4l2-event: Don't set sev->fh to NULL on unsubscribe [media] v4l2-event: Remove pending events from fh event queue when unsubscribing [media] v4l2-event: Deny subscribing with a type of V4L2_EVENT_ALL [media] MAINTAINERS: add a maintainer for s5p-mfc driver [media] v4l: s5p-mfc: fix reported capabilities [media] media: vb2: reset queued list on REQBUFS(0) call [media] media: vb2: set buffer length correctly for all buffer types [media] media: vb2: add a check for uninitialized buffer [media] mxl111sf: fix build warning [media] mxl111sf: remove pointless if condition in mxl111sf_config_spi [media] mxl111sf: check for errors after mxl111sf_write_reg in mxl111sf_idac_config [media] mxl111sf: fix return value of mxl111sf_idac_config [media] uvcvideo: GET_RES should only be checked for BITMAP type menu controls
-
git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc由 Linus Torvalds 提交于
* 'merge' of git://git.kernel.org/pub/scm/linux/kernel/git/benh/powerpc: powerpc/kvm: Fix build failure with HV KVM and CBE powerpc/ps3: Fix lv1_gpu_attribute hcall powerpc/ps3: Fix PS3 repository build warnings powerpc/ps3: irq: Remove IRQF_DISABLED powerpc/irq: Remove IRQF_DISABLED powerpc/numa: NUMA topology support for PowerNV powerpc: Add System RAM to /proc/iomem powerpc: Add KVM as module to defconfigs powerpc/kvm: Fix build with older toolchains powerpc, tqm5200: update tqm5200_defconfig to fit for charon board. powerpc/5200: add support for charon board
-
git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild由 Linus Torvalds 提交于
* 'rc-fixes' of git://git.kernel.org/pub/scm/linux/kernel/git/mmarek/kbuild: kbuild: Fix missing system calls check on mips.
-
由 William Douglas 提交于
This needed the sfi IRQ 0xFF fix to go in first. It simply plumbs in the bma023 driver with the firmware naming of it. Signed-off-by: NWilliam Douglas <william.douglas@intel.com> Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Feng Tang 提交于
Real world year equals the value in vrtc YEAR register plus an offset. We used 1960 as the offset to make leap year consistent, but for a device's first use, its YEAR register is 0 and the system year will be parsed as 1960 which is not a valid UNIX time and will cause many applications to fail mysteriously. So we use 1972 instead to fix this issue. Updated patch which adds a sanity check suggested by Mathias This isn't a change in behaviour for systems, because 1972 is the one we actually use. It's the old version in upstream which is out of sync with all devices. Signed-off-by: NFeng Tang <feng.tang@intel.com> Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
由 Zhang Rui 提交于
Fix a build error. CE4100 with no serial errors because the alternate function is only a prototype not a null function as intended. Signed-off-by: NZhang Rui <rui.zhang@intel.com> Signed-off-by: NAlan Cox <alan@linux.intel.com> Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://github.com/jgarzik/libata-dev由 Linus Torvalds 提交于
* 'upstream-linus' of git://github.com/jgarzik/libata-dev: pata_of_platform: Don't use NO_IRQ [libata] ahci: Add ASMedia ASM1061 support [libata] Issue SRST to Sil3726 PMP sata_sis.c: trivial spelling fix ahci_platform: use dev_get_platdata() [libata] libata-scsi.c: Add function parameter documentation
-
git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs: btrfs: rename the option to nospace_cache Btrfs: handle bio_add_page failure gracefully in scrub Btrfs: fix deadlock caused by the race between relocation Btrfs: only map pages if we know we need them when reading the space cache Btrfs: fix orphan backref nodes Btrfs: Abstract similar code for btrfs_block_rsv_add{, _noflush} Btrfs: fix unreleased path in btrfs_orphan_cleanup() Btrfs: fix no reserved space for writing out inode cache Btrfs: fix nocow when deleting the item Btrfs: tweak the delayed inode reservations again Btrfs: rework error handling in btrfs_mount() Btrfs: close devices on all error paths in open_ctree() Btrfs: avoid null dereference and leaks when bailing from open_ctree() Btrfs: fix subvol_name leak on error in btrfs_mount() Btrfs: fix memory leak in btrfs_parse_early_options() Btrfs: fix our reservations for updating an inode when completing io Btrfs: fix oops on NULL trans handle in btrfs_truncate btrfs: fix double-free 'tree_root' in 'btrfs_mount()'
-
git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound由 Linus Torvalds 提交于
* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/tiwai/sound: ALSA: usb-audio: Use kmemdup rather than duplicating its implementation ALSA: hda - Re-enable the check NO_PRESENCE misc bit ALSA: vmaster - Free slave-links when freeing the master element ALSA: hda - Don't add elements of other codecs to vmaster slave ALSA: intel8x0: improve virtual environment detection ALSA: intel8x0: move virtual environment detection code into one place ALSA: snd_usb_audio: add Logitech HD Webcam c510 to quirk-384 ALSA: hda - fix internal mic on Dell Vostro 3500 laptop ALSA: HDA: Remove quirk for Toshiba T110 ALSA: usb-audio - Fix the missing volume quirks at delayed init ALSA: hda - Mute unused capture sources for Realtek codecs ALSA: intel8x0: Improve comments for VM optimization ASoC: Ensure we get an impedence reported for WM8958 jack detect ASoC: Don't use wm8994->control_data when requesting IRQs ASoC: Don't use wm8994->control_data in wm8994_readable_register() ASoC: Update git repository URL
-
git://people.freedesktop.org/~airlied/linux由 Linus Torvalds 提交于
* 'drm-fixes' of git://people.freedesktop.org/~airlied/linux: (42 commits) drm/radeon/kms/pm: switch to dynamically allocating clock mode array drm/radeon/kms: optimize r600_pm_profile_init drm/radeon/kms/pm: add a proper pm profile init function for fusion drm/radeon/kms: remove extraneous calls to radeon_pm_compute_clocks() drm/exynos: added padding to be 64-bit align. drm: fix kconfig unmet dependency warning drm: add some comments to drm_wait_vblank and drm_queue_vblank_event drm/radeon/benchmark: signedness bug in radeon_benchmark_move() drm: do not sleep on vblank while holding a mutex MAINTAINERS: exynos: Add EXYNOS DRM maintainer entry drm: try to restore previous CRTC config if mode set fails drm/radeon/kms: make an aux failure debug only drm: drop select of SLOW_WORK drm: serialize access to list of debugfs files drm/radeon/kms: fix use of vram scratch page on evergreen/ni drm/radeon: Make sure CS mutex is held across GPU reset. drm: Ensure string is null terminated. vmwgfx: Only allow 64x64 cursors vmwgfx: Initialize clip rect loop correctly in surface dirty vmwgfx: Close screen object system ...
-
git://github.com/herbertx/crypto由 Linus Torvalds 提交于
* git://github.com/herbertx/crypto: crypto: algapi - Fix build problem with NET disabled crypto: user - Fix rwsem leak in crypto_user
-
git://oss.sgi.com/xfs/xfs由 Linus Torvalds 提交于
* 'for-linus' of git://oss.sgi.com/xfs/xfs: xfs: fix force shutdown handling in xfs_end_io xfs: constify xfs_item_ops xfs: Fix possible memory corruption in xfs_readlink
-
-
-
- 11 11月, 2011 19 次提交
-
-
由 Shawn Guo 提交于
The following error is seen in some case when mounting rootfs from SD/MMC cards. Waiting for root device /dev/mmcblk0p1... mmc1: host does not support reading read-only switch. assuming write-enable. mmc1: new high speed SDHC card at address b368 mmcblk0: mmc1:b368 SDC 3.74 GiB mmcblk0: p1 mmc1: Timeout waiting for hardware interrupt. mmcblk0: error -110 transferring data, sector 3678224, nr 40, cmd response 0x900, card status 0xc00 end_request: I/O error, dev mmcblk0, sector 3678225 Buffer I/O error on device mmcblk0p1, logical block 458754 lost page write due to I/O error on mmcblk0p1 This patch fixes the problem by lowering the usdhc clock and correcting watermark configuration. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Cc: Chris Ball <cjb@laptop.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
由 Shawn Guo 提交于
The AUTO_ZRELADDR selection for ARCH_IMX_V4_V5 and ARCH_MX5 should really be mutually exclusive to ZBOOT_ROM just like what ARCH_IMX_V6_V7 does. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
由 Shawn Guo 提交于
The config symbol ARCH_MX3 has been removed by commit 'a89cf59b arm/imx: merge i.MX3 and i.MX6', and it should not be referenced any more. The patch also change ARCH_MX* to SOC_IMX* for other platforms. Signed-off-by: NShawn Guo <shawn.guo@linaro.org> Cc: Sascha Hauer <s.hauer@pengutronix.de> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
由 Richard Zhao 提交于
Signed-off-by: NRichard Zhao <richard.zhao@linaro.org> Signed-off-by: NSascha Hauer <s.hauer@pengutronix.de>
-
由 David Sterba 提交于
Rename no_space_cache option to nospace_cache to be more consistent with the rest, where the simple prefix 'no' is used to negate an option. The option has been introduced during the -rc1 cycle and there are has not been widely used, so it's safe. Signed-off-by: NDavid Sterba <dsterba@suse.cz> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Alex Deucher 提交于
On newer chips the number of clock modes per power state varies. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Avoid a lot of extra loops through the pm state array. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
The new power tables need to be handled differently when setting up the profiles. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
It's already called via the DPMS functions. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Arne Jansen 提交于
Currently scrub fails with ENOMEM when bio_add_page fails. Unfortunately dm based targets accept only one page per bio, thus making scrub always fails. This patch just submits the current bio when an error is encountered and starts a new one. Signed-off-by: NArne Jansen <sensille@gmx.net> Signed-off-by: NChris Mason <chris.mason@oracle.com>
-
由 Inki Dae 提交于
Signed-off-by: NInki Dae <inki.dae@samsung.com> Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Randy Dunlap 提交于
Fix kconfig unmet dependency warning. BACKLIGHT_CLASS_DEVICE depends on BACKLIGHT_LCD_SUPPORT, so select the latter along with the former. warning: (DRM_RADEON_KMS && DRM_I915 && STUB_POULSBO && FB_BACKLIGHT && PANEL_SHARP_LS037V7DW01 && PANEL_ACX565AKM && USB_APPLEDISPLAY && FB_OLPC_DCON && ASUS_LAPTOP && SONY_LAPTOP && THINKPAD_ACPI && EEEPC_LAPTOP && ACPI_ASUS && ACPI_CMPC && SAMSUNG_Q10) selects BACKLIGHT_CLASS_DEVICE which has unmet direct dependencies (HAS_IOMEM && BACKLIGHT_LCD_SUPPORT) Signed-off-by: NRandy Dunlap <rdunlap@xenotime.net> Cc: David Airlie <airlied@linux.ie> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
git://git.freedesktop.org/git/nouveau/linux-2.6由 Dave Airlie 提交于
* 'drm-nouveau-fixes' of git://git.freedesktop.org/git/nouveau/linux-2.6: drm/nouveau: Fix bandwidth calculation for DisplayPort drm/nouveau: by default use low bpp framebuffer on low memory cards drm/nv10: Change the BO size threshold determining the memory placement range. drm/nvc0: enable acceleration for nvc1 by default drm/nvc0/gr: fixup the mmio list register writes for 0xc1 drm/nvc1: hacky workaround to fix accel issues drm/nvc0/gr: fix some bugs in grctx generation drm/nvc0: enable acceleration on 0xc8 by default drm/nvc0/vram: skip disabled PBFB subunits drm/nv40/pm: fix issues on igp chipsets, which don't have memory drm/nouveau: testing the wrong variable drm/nvc0/vram: storage type 0xc3 is not compressed drm/nv50: fix stability issue on NV86. drm/nouveau: initialize chan->fence.lock before use drm/nv50/vram: fix incorrect detection of bank count on newer chipsets drm/nv50/gr: typo fix, how about we not reset fifo during graph init? drm/nv50/bios: fixup mpll programming from the init table parser drm/nouveau: fix oops if i2c bus not found in nouveau_i2c_identify() drm: make sure drm_vblank_init() has been called before touching vbl_lock
-
由 Ilija Hadzic 提交于
during the review of the fix for locks problems in drm_wait_vblank, a couple of false concerns were raised about how the drm_vblank_get and drm_vblank_put are used in this function; it turned out that the code is correct and that it cannot be simplified add a few comments to explain non-obvious flows in the code, to prevent "false alarms" in the future v2: incorporate comments received from Daniel Vetter Signed-off-by: NIlija Hadzic <ihadzic@research.bell-labs.com> Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Dan Carpenter 提交于
radeon_benchmark_do_move() returns an int so "time" should be int too. Making it unsigned breaks the error handling. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Ilija Hadzic 提交于
drm_wait_vblank must be DRM_UNLOCKED because otherwise it will grab the drm_global_mutex and then go to sleep until the vblank event it is waiting for. That can wreck havoc in the windowing system because if one process issues this ioctl, it will block all other processes for the duration of all vblanks between the current and the one it is waiting for. In some cases it can block the entire windowing system. v2: incorporate comments received from Daniel Vetter and Michel Daenzer. v3/v4: after a lengty discussion with Daniel Vetter, it was concluded that the only thing not yet protected with locks and atomic ops is the write to dev->last_vblank_wait. It's only used in a debug file in proc, and the current code already employs no correct locking: the proc file only takes dev->struct_mutex, whereas drm_wait_vblank implicitly took the drm_global_mutex. Given all this, it's not worth bothering to try to fix the locks at this time. Signed-off-by: NIlija Hadzic <ihadzic@research.bell-labs.com> Reviewed-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Kyungmin Park 提交于
As Exynos DRM is merged at mainline. Also update the maintainer entry. Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Jesse Barnes 提交于
We restore the CRTC, encoder, and connector configurations, but if the mode set failed, the attached display may have been turned off, so we need to try set_config again to restore things to the way they were. Signed-off-by: NJesse Barnes <jbarnes@virtuousgeek.org> Reviewed-by: NAlex Deucher <alexdeucher@gmail.com> Signed-off-by: NDave Airlie <airlied@redhat.com>
-
由 Alex Deucher 提交于
Can happen when there is no DP panel attached, confusing users. Make it debug only. Signed-off-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@kernel.org Signed-off-by: NDave Airlie <airlied@redhat.com>
-