Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org

Need to swap on BE.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Cc: stable@vger.kernel.org

This fixes fast color clear with 1D-tiled single-sample surfaces
and Hyper-Z corruption with 1D-tiled depth surfaces.

Even though it seems it is not needed for 1D tiling, CMASK and HTILE are
always 2D-tiled, thus the hw needs to know the actual pipe configuration
for CMASK and HTILE addressing no matter what the tiling mode of the surface
is.
Signed-off-by: NMarek Olšák <marek.olsak@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Signed-off-by: NChristian König <christian.koenig@amd.com>

When we disable the rings, set the status properly.  If
not other code pathes may try and use the rings which are
not functional at this point.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Copy-paste typo.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Moving the pm resume up in the init order to fix
dpm seems to have regressed somes cases with the old
pm code.  Move it back to late resume.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The reason for the false positives was fixed quite some time ago and since
most engines can still execute NOPs while being locked up it leads to false
negatives.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

In all cases where it really matters we are using the read functions anyway.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Reviewed-by: NAlex Deucher <alexander.deucher@amd.com>

Some of the vce clocks are automatic, others need to
be manually enabled.  For ease, just disable cg when
vce is active.

v2: rebased
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Only VCE 2.0 support so far.

v2: squashing multiple patches into this one
v3: add IRQ support for CIK, major cleanups,
    basic code documentation
v4: remove HAINAN from chipset list
Signed-off-by: NChristian König <christian.koenig@amd.com>

If we are not able to properly initialize one of the gpu
engines for buffer paging, we limit vram to the size of
the cpu visible aperture.  We generally either use the gfx
or dma engine to do this.  Clean up the size limiting code
to only adjust the size based on what ring is selected
for buffer paging rather than making assumptions about which
engine is selected for paging.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>

Use the hw power up values rather than 0.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This is the preferred flushing method on CIK.

Note, this only works on the PFP so the engine bit must be
set.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It's used in several places so move to a common shared
function.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This reverts commit 99b4f251.

Semaphores work fine after further review and testing.
Cc: 3.13 <stable@vger.kernel.org> # 3.13

pci config reset is a low level reset that resets
the entire chip from the bus interface.  It can
be more reliable if soft reset fails.

v2: fix rebase
v3: hide behind module parameter
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Fill in asic family specific versions rather than
using the generic version.  This lets us handle asic
specific differences more easily.  In this case, we
disable sw swapping of the rtpr writeback value on
r6xx+ since the hw does it for us.  Fixes bogus
rptr readback on BE systems.

v2: remove missed cpu_to_le32(), add comments
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We need more control over the ordering of dpm init with
respect to the rest of the asic.  Specifically, the SMC
has to be initialized before the rlc and cg/pg.  The pm
code currently initializes late in the driver, but we need
it to happen much earlier so move pm handling into the asic
specific callbacks.

This makes dpm more reliable and makes clockgating work
properly on CIK parts and should help on SI parts as well.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

We need to reorder the driver init sequence to better accomodate
dpm which needs to be loaded earlier in the init sequence.  Move
fw init up so that it's available for dpm init.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This will allow userspace to correctly program the PA_SC_RASTER_CONFIG
register, so it can be considered a fix.
Signed-off-by: NMarek Olšák <marek.olsak@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Only the render backends of the first shader engine were enabled. The others
were erroneously disabled. Enabling the other render backends improves
performance a lot.

Unigine Sanctuary on Bonaire:
  Before: 15 fps
  After:  90 fps

Judging from the fan noise, the GPU was also underclocked when the other
render backends were disabled, resulting in horrible performance. The fan is
a lot noisy under load now.
Signed-off-by: NMarek Olšák <marek.olsak@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

This is required to properly calculate the tiling parameters
in userspace.
Signed-off-by: NMichel Dänzer <michel.daenzer@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

A single doorbell page is plenty for cik kms compute.
Use a single page and manage doorbell allocation by
individual doorbells rather than pages.  Identify
doorbells by their index rather than byte offset.
Signed-off-by: NAndrew Lewycky <Andrew.Lewycky@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

To workaround bugs and/or certain limits it's sometimes
useful to fall back to waiting on fences.
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>
Cc: stable@vger.kernel.org

Set the PA_SC_RASTER_CONFIG[_1] registers for hawaii.
The rest is the same as the other asics.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This just updates the firmware loading functions
to look for the appropriate firmware files for
hawaii.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The formula needs to be adjusted since there are 4 RBs
per SH rather than 2 as on previous asics.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The golden register settings are optimal settings for
certain registers from the hardware team.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Hawaii uses a different tiling configuration.  Add support
for it.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Skip programming a register that was removed and
adjust the mask of the VM client status.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

This adds the hawaii asic specific configuration
details.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The DMA ring seems to be stable now.

v2: remove pt_ring_index as well
Signed-off-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

It is said to cause hangs.
Signed-off-by: NMarek Olšák <marek.olsak@amd.com>
Reviewed-by: NChristian König <christian.koenig@amd.com>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The buffers needs to be in little endian format.
Noticed-by: NSylvain BERTRAND <sylware@legeek.net>
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Uses the CP ring rather than the DMA ring.  Useful
for debugging and benchmarking.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Allows you to enable dither in the display hardware
when the monitor supports lower a lower bpc than the
current framebuffer format.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

The FMT blocks control how data is sent from the backend
of the display pipe to to monitor.  Proper set up of the
FMT blocks are required for 30bpp formats.  Additionally,
dithering can be enabled on for better display with 18 and
24bpp displays.  The exception is LVDS/eDP which atom
takes care of in the SelectCRTC_Source table.  For now
just enable truncation until we test dithering more.
Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>

Prevent driver load problems if the smc is missing.

bug:
https://bugzilla.kernel.org/show_bug.cgi?id=63011Signed-off-by: NAlex Deucher <alexander.deucher@amd.com>