- 11 6月, 2008 32 次提交
-
-
由 Gerrit Renker 提交于
This fixes a bug in the reverse lookup of p: given a value f(p), instead of p, the function returned the smallest tabulated value f(p). The smallest tabulated value of 10^6 * f(p) = sqrt(2*p/3) + 12 * sqrt(3*p/8) * (32 * p^3 + p) for p=0.0001 is 8172. Since this value is scaled by 10^6, the outcome of this bug is that a loss of 8172/10^6 = 0.8172% was reported whenever the input was below the table resolution of 0.01%. This means that the value was over 80 times too high, resulting in large spikes of the initial loss interval, thus unnecessarily reducing the throughput. Also corrected the printk format (%u for u32). Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>
-
由 Gerrit Renker 提交于
This fixes an oversight from an earlier patch, ensuring that Ack Vectors are not processed on request sockets. The issue is that Ack Vectors must not be parsed on request sockets, since the Ack Vector feature depends on the selection of the (TX) CCID. During the initial handshake the CCIDs are undefined, and so RFC 4340, 10.3 applies: "Using CCID-specific options and feature options during a negotiation for the corresponding CCID feature is NOT RECOMMENDED [...]" And it is not even possible: when the server receives the Request from the client, the CCID and Ack vector features are undefined; when the Ack finalising the 3-way hanshake arrives, the request socket has not been cloned yet into a full socket. (This order is necessary, since otherwise the newly created socket would have to be destroyed whenever an option error occurred - a malicious hacker could simply send garbage options and exploit this.) Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>
-
由 Gerrit Renker 提交于
This patch fixes the following sparse warnings: * nested min(max()) expression: net/dccp/ccids/ccid3.c:91:21: warning: symbol '__x' shadows an earlier one net/dccp/ccids/ccid3.c:91:21: warning: symbol '__y' shadows an earlier one * Declaration of function prototypes in .c instead of .h file, resulting in "should it be static?" warnings. * Declared "struct dccpw" static (local to dccp_probe). * Disabled dccp_delayed_ack() - not fully removed due to RFC 4340, 11.3 ("Receivers SHOULD implement delayed acknowledgement timers ..."). * Used a different local variable name to avoid net/dccp/ackvec.c:293:13: warning: symbol 'state' shadows an earlier one net/dccp/ackvec.c:238:33: originally declared here * Removed unused functions `dccp_ackvector_print' and `dccp_ackvec_print'. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>
-
由 Gerrit Renker 提交于
In commit $(825de27d) (from 27th May, commit message `dccp ccid-3: Fix "t_ipi explosion" bug'), the CCID-3 window counter computation was fixed to cope with RTTs < 4 microseconds. Such RTTs can be found e.g. when running CCID-3 over loopback. The fix removed a check against RTT < 4, but introduced a divide-by-zero bug. All steady-state RTTs in DCCP are filtered using dccp_sample_rtt(), which ensures non-zero samples. However, a zero RTT is possible on initialisation, when there is no RTT sample from the Request/Response exchange. The fix is to use the fallback-RTT from RFC 4340, 3.4. This is also better than just fixing update_win_count() since it allows other parts of the code to always assume that the RTT is non-zero during the time that the CCID is used. Signed-off-by: NGerrit Renker <gerrit@erg.abdn.ac.uk>
-
由 David S. Miller 提交于
-
由 Krzysztof Piotr Oledzki 提交于
Most legacy software do not like tables > 255 as rtm_table is u8 so tb_id is sent &0xff and it is possible to mismatch for example table 510 with table 254 (main). This patch introduces RT_TABLE_COMPAT=252 so the code uses it if tb_id > 255. It makes such old applications happy, new ones are still able to use RTA_TABLE to get a proper table id. Signed-off-by: NKrzysztof Piotr Oledzki <ole@ans.pl> Acked-by: NPatrick McHardy <kaber@trash.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ben Hutchings 提交于
dev_close() must be called holding the RTNL. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Al Viro 提交于
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jay Cliburn 提交于
Using vendor magic to force the PHY into power save mode breaks suspend. It isn't needed anyway, so remove it. Tested-by: NAvuton Olrich <avuton@gmail.com> Signed-off-by: NJay Cliburn <jacliburn@bellsouth.net> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Frank Blaschka 提交于
In case the xmit function drop out with an error, we have to wake the netdevice queue to start another xmit. Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Peter Tiedemann 提交于
Prepare-function to call s390dbf was wrong handling variable arguments. This worked as macro but not as function any more. Now using va_list processing. Signed-off-by: NPeter Tiedemann <ptiedem@de.ibm.com> Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Frank Blaschka 提交于
Remove unnecessary messages. Write important debug information to s390dbf. Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Cornelia Huck 提交于
Get the devno from the ccw device via ccw_device_get_id() instead of parsing the bus_id. Signed-off-by: NCornelia Huck <cornelia.huck@de.ibm.com> Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com> Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Frank Blaschka 提交于
The ip event handler may present us non qeth network interfaces. Add qeth card pointer check. Signed-off-by: NFrank Blaschka <frank.blaschka@de.ibm.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Rusty Russell 提交于
virtio_net uses a timer to free old transmitted packets, rather than leaving callbacks enabled all the time. If the host promises to always notify us when the transmit ring is empty, we can free packets at that point and avoid the timer. Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Mark McLoughlin 提交于
virtio_net currently only frees old transmit skbs just before queueing new ones. If the queue is full, it then enables interrupts and waits for notification that more work has been performed. However, a side-effect of this scheme is that there are always xmit skbs left dangling when no new packets are sent, against the Documentation/networking/driver.txt guideline: "... it is not allowed for your TX mitigation scheme to let TX packets "hang out" in the TX ring unreclaimed forever if no new TX packets are sent." Add a timer to ensure that any time we queue new TX skbs, we will shortly free them again. This fixes an easily reproduced hang at shutdown where iptables attempts to unload nf_conntrack and nf_conntrack waits for an skb it is tracking to be freed, but virtio_net never frees it. Signed-off-by: NMark McLoughlin <markmc@redhat.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Mark McLoughlin 提交于
Signed-off-by: NMark McLoughlin <markmc@redhat.com> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Mark McLoughlin 提交于
hdr->csum_start is the offset from the start of the ethernet header to the transport layer checksum field. skb->csum_start is the offset from skb->head. skb_partial_csum_set() assumes that skb->data points to the ethernet header - i.e. it computes skb->csum_start by adding the headroom to hdr->csum_start. Since eth_type_trans() skb_pull()s the ethernet header, skb_partial_csum_set() should be called before eth_type_trans(). (Without this patch, GSO packets from a guest to the world outside the host are corrupted). Signed-off-by: NMark McLoughlin <markmc@redhat.com> Acked-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NRusty Russell <rusty@rustcorp.com.au> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jan-Bernd Themann 提交于
eHEA has to call firmware functions in order to change the mac address of a logical port. This patch checks if the logical port is up when calling the register / deregister mac address calls. If the port is down these firmware calls would fail and are therefore not executed. Signed-off-by: NJan-Bernd Themann <themann@de.ibm.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Steve Hodgson 提交于
RX queue flush can fail if traffic continues to arrive. Recover by performing an invisible reset. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Adrian Bunk 提交于
This patch fixes the following build error: <-- snip --> ... Building modules, stage 2. MODPOST 1203 modules ERROR: "lance_open" [drivers/net/mvme147.ko] undefined! ERROR: "lance_close" [drivers/net/mvme147.ko] undefined! ERROR: "lance_tx_timeout" [drivers/net/mvme147.ko] undefined! ERROR: "lance_set_multicast" [drivers/net/mvme147.ko] undefined! ERROR: "lance_start_xmit" [drivers/net/mvme147.ko] undefined! ... make[2]: *** [__modpost] Error 1 <-- snip --> Reported-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jeff Kirsher 提交于
Define names were accidently transposed. Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Ayaz Abdulla 提交于
Add a workaround for lost MSI interrupts. There is a race condition in the HW in which future interrupts could be missed. The workaround is to toggle the MSI irq mask. Added cleanup based on comments from Andrew Morton. Signed-off-by: NAyaz Abdulla <aabdulla@nvidia.com> Cc: Manfred Spraul <manfred@colorfullife.com> Cc: Jeff Garzik <jeff@garzik.org> Cc: <stable@kernel.org> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NJeff Garzik <jgarzik@redhat.com>
-
由 Jamal Hadi Salim 提交于
When pfkey has no km listeners, it still does a lot of work before finding out there aint nobody out there. If a tree falls in a forest and no one is around to hear it, does it make a sound? In this case it makes a lot of noise: With this short-circuit adding 10s of thousands of SAs using netlink improves performance by ~10%. Signed-off-by: NJamal Hadi Salim <hadi@cyberus.ca> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
We need to unshare the skb first as otherwise pskb_may_pull may write to a shared skb which could be bad. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Herbert Xu 提交于
The length field in the PPPOE header wasn't checked completely. This patch causes all packets shorter than the declared length to be dropped. It also changes the memcpy_toiovec call to skb_copy_datagram_iovec so that paged packets (rare for PPPOE) are handled properly. Thanks to Ilja of the Netric Security Team for discovering and reporting this bug, and Chris Wright for the total_len check. Signed-off-by: NHerbert Xu <herbert@gondor.apana.org.au> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Akinobu Mita 提交于
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Acked-by: NKarsten Keil <kkeil@suse.de> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexey Dobriyan 提交于
1. creating proc entry and not saving pointer to PDE and checking it is not going to work. 2. if proc entry wasn't created, no reason to remove it on error path. Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Pradeep Singh Rautela 提交于
KERNEL_OFFSET macro in eni.h is not required as it is not used anywhere. Remove the unused macro from eni.h header file. Signed-off-by: NPradeep Singh <rautelap@gmail.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Arnaldo Carvalho de Melo 提交于
Wei Yongjun noticed that we may call reqsk_free on request sock objects where the opt fields may not be initialized, fix it by introducing inet_reqsk_alloc where we initialize ->opt to NULL and set ->pktopts to NULL in inet6_reqsk_alloc. Signed-off-by: NArnaldo Carvalho de Melo <acme@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Rami Rosen 提交于
- The tcp_unhash() method in /include/net/tcp.h is no more needed, as the unhash method in tcp_prot structure is now inet_unhash (instead of tcp_unhash in the past); see tcp_prot structure in net/ipv4/tcp_ipv4.c. - So, this patch removes tcp_unhash() declaration from include/net/tcp.h Signed-off-by: NRami Rosen <ramirose@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 James Chapman 提交于
This patch fixes a potential memory corruption in pppol2tp_recvmsg(). If skb->len is bigger than the caller's buffer length, memcpy_toiovec() will go into unintialized data on the kernel heap, interpret it as an iovec and start modifying memory. The fix is to change the memcpy_toiovec() call to skb_copy_datagram_iovec() so that paged packets (rare for PPPOL2TP) are handled properly. Also check that the caller's buffer is big enough for the data and set the MSG_TRUNC flag if it is not so. Reported-by: NIlja <ilja@netric.org> Signed-off-by: NJames Chapman <jchapman@katalix.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 10 6月, 2008 8 次提交
-
-
由 Pavel Emelyanov 提交于
The bindv6only is tuned via sysctl. It is already on a struct net and per-net sysctls allow for its modification (ipv6_sysctl_net_init). Despite this the value configured in the init net is used for the rest of them. Signed-off-by: NPavel Emelyanov <xemul@openvz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Ingo Molnar 提交于
-tip testing found the following build error: drivers/built-in.o: In function `mcs_receive_irq': mcs7780.c:(.text+0x4e429): undefined reference to `crc32_le' drivers/built-in.o: In function `mcs_hard_xmit': mcs7780.c:(.text+0x4e9af): undefined reference to `crc32_le' with: http://redhat.com/~mingo/misc/config-Sun_Jun__8_22_56_14_CEST_2008.bad the reason is a missing enablement of the CRC32 library in the Kconfig. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NSamuel Ortiz <samuel@sortiz.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch increments the version to 3.92.1. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
On 5761 non-e devices, two problems prevent the administrator from overriding the WOL settings in the device's NVRAM. The first problem is that GPIO 0 and GPIO 2 have been swapped. This change prevented the administrator from turning on WOL when it is disabled in NVRAM. The fix is to add a new path for the 5761 that swaps the two GPIOs in the code as well. The second problem is that GPIO 1 could not be toggled by the driver because the GPIO is shared with the debug UART GPIO. This will prevent the administrator from being able to turn WOL off if it was enabled in NVRAM. The fix is to always disable the debug UART after a GRC reset. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
This patch fixes a problem where the TG3_FLAG_10_100_ONLY flag was testing against the wrong flags variable. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Matt Carlson 提交于
The git commit ef167e27 entitled "Fix supporting flowctrl code" introduced a bug that prevents 5714S, 5715S and 5780S devices from falling back to a forced link mode. The problem is that the added flow control check will always fail if flow control is set to autoneg and either RX or TX (or both) flow control is enabled. The driver defaults to setting flow control to autoneg and advertises both RX and TX flow control. The fix is to remove the errant check. Signed-off-by: NMatt Carlson <mcarlson@broadcom.com> Signed-off-by: NMichael Chan <mchan@broadcom.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Marcin Slusarz 提交于
fix race between: ieee80211_open->ieee80211_led_radio->led_trigger_event->led_set_brightness->iwl3945_led_brightness_set (which assumes that "led->priv" is not NULL) and iwl3945_pci_probe->iwl3945_setup_deferred_work->(...)->iwl3945_bg_alive_start->iwl3945_alive_start->iwl3945_led_register->iwl3945_led_register_led which sets priv field in struct iwl3945_led after led->led_dev.brightness_set = iwl3945_led_brightness_set; (...) led_classdev_register(device, &led->led_dev); http://kerneloops.org/guilty.php?guilty=iwl3945_led_brightness_set&version=2.6.25-release&start=1671168&end=1703935&class=oopsSigned-off-by: NMarcin Slusarz <marcin.slusarz@gmail.com> Cc: Zhu Yi <yi.zhu@intel.com> Cc: Reinette Chatre <reinette.chatre@intel.com> Cc: Tomas Winkler <tomas.winkler@intel.com> Cc: linux-wireless@vger.kernel.org Cc: ipw3945-devel@lists.sourceforge.net Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-
由 Adrian Bunk 提交于
This patch fixes a typo in the name of a config variable. Reported-by: NRobert P. J. Day <rpjday@crashcourse.ca> Signed-off-by: NAdrian Bunk <bunk@kernel.org> Reviewed-by: NMichael Buesch <mb@bu3sch.de> Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
-