- 10 1月, 2015 1 次提交
-
-
由 Jaegeuk Kim 提交于
This patch adds two new ioctls to release inmemory pages grabbed by atomic writes. o f2fs_ioc_abort_volatile_write - If transaction was failed, all the grabbed pages and data should be written. o f2fs_ioc_release_volatile_write - This is to enhance the performance of PERSIST mode in sqlite. In order to avoid huge memory consumption which causes OOM, this patch changes volatile writes to use normal dirty pages, instead blocked flushing to the disk as long as system does not suffer from memory pressure. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 02 12月, 2014 1 次提交
-
-
由 Chao Yu 提交于
Fix the wrong error number in error path of f2fs_write_begin. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 26 11月, 2014 1 次提交
-
-
由 Jaegeuk Kim 提交于
A deadlock can be occurred: Thread 1] Thread 2] - f2fs_write_data_pages - f2fs_write_begin - lock_page(page #0) - grab_cache_page(page #X) - get_node_page(inode_page) - grab_cache_page(page #0) : to convert inline_data - f2fs_write_data_page - f2fs_write_inline_data - get_node_page(inode_page) In this case, trying to lock inode_page and page #0 causes deadlock. In order to avoid this, this patch adds a rule for this locking policy, which is that page #0 should be locked followed by inode_page lock. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 19 11月, 2014 1 次提交
-
-
由 Jaegeuk Kim 提交于
We should put the inode page when error was occurred. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 05 11月, 2014 2 次提交
-
-
由 Jaegeuk Kim 提交于
__submit_merged_bio f2fs_write_end_io f2fs_write_end_io wait_io = X wait_io = x complete(X) complete(X) wait_io = NULL wait_for_completion() free(X) spin_lock(X) kernel panic In order to avoid this, this patch removes the wait_io facility. Instead, we can use wait_on_all_pages_writeback(sbi) to wait for end_ios. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch simplifies the inline_data usage with the following rule. 1. inline_data is set during the file creation. 2. If new data is requested to be written ranges out of inline_data, f2fs converts that inode permanently. 3. There is no cases which converts non-inline_data inode to inline_data. 4. The inline_data flag should be changed under inode page lock. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 04 11月, 2014 4 次提交
-
-
由 Jan Kara 提交于
f2fs_write_begin() doesn't initialize the 'dn' variable if the inode has inline data. However it uses its contents to decide whether it should just zero out the page or load data to it. Thus if we are unlucky we can zero out page contents instead of loading inline data into a page. CC: stable@vger.kernel.org CC: Changman Lee <cm224.lee@samsung.com> Signed-off-by: NJan Kara <jack@suse.cz> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
The sceanrio is like this. inline_data i_size page write_begin/vm_page_mkwrite X 30 dirty_page X 30 write to #4096 position X 30 get_dnode_of_data wait for get_dnode_of_data O 30 write inline_data O 30 get_dnode_of_data O 30 reserve data block .. In this case, we have #0 = NEW_ADDR and inline_data as well. We should not allow this condition for further access. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
If user truncates file's data, we should truncate inmemory pages too. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch let inmemory pages be clean all the time. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 08 10月, 2014 1 次提交
-
-
由 Jaegeuk Kim 提交于
This patch adds support for volatile writes which keep data pages in memory until f2fs_evict_inode is called by iput. For instance, we can use this feature for the sqlite database as follows. While supporting atomic writes for main database file, we can keep its journal data temporarily in the page cache by the following sequence. 1. open -> ioctl(F2FS_IOC_START_VOLATILE_WRITE); 2. writes : keep all the data in the page cache. 3. flush to the database file with atomic writes a. ioctl(F2FS_IOC_START_ATOMIC_WRITE); b. writes c. ioctl(F2FS_IOC_COMMIT_ATOMIC_WRITE); 4. close -> drop the cached data Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 07 10月, 2014 1 次提交
-
-
由 Jaegeuk Kim 提交于
This patch introduces a very limited functionality for atomic write support. In order to support atomic write, this patch adds two ioctls: o F2FS_IOC_START_ATOMIC_WRITE o F2FS_IOC_COMMIT_ATOMIC_WRITE The database engine should be aware of the following sequence. 1. open -> ioctl(F2FS_IOC_START_ATOMIC_WRITE); 2. writes : all the written data will be treated as atomic pages. 3. commit -> ioctl(F2FS_IOC_COMMIT_ATOMIC_WRITE); : this flushes all the data blocks to the disk, which will be shown all or nothing by f2fs recovery procedure. 4. repeat to #2. The IO pattens should be: ,- START_ATOMIC_WRITE ,- COMMIT_ATOMIC_WRITE CP | D D D D D D | FSYNC | D D D D | FSYNC ... `- COMMIT_ATOMIC_WRITE Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 24 9月, 2014 4 次提交
-
-
由 Chao Yu 提交于
Block size in f2fs is 4096 bytes, so theoretically, f2fs can support 4096 bytes sector device at maximum. But now f2fs only support 512 bytes size sector, so block device such as zRAM which uses page cache as its block storage space will not be mounted successfully as mismatch between sector size of zRAM and sector size of f2fs supported. In this patch we support large sector size in f2fs, so block device with sector size of 512/1024/2048/4096 bytes can be supported in f2fs. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
The f2fs_direct_IO uses __allocate_data_block, but inside the allocation path, we should update i_size at the changed time to update its inode page. Otherwise, we can get wrong i_size after roll-forward recovery. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch cleans up a simple macro. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch revisited whole the recovery information during the f2fs_sync_file. In this patch, there are three information to make a decision. a) IS_CHECKPOINTED, /* is it checkpointed before? */ b) HAS_FSYNCED_INODE, /* is the inode fsynced before? */ c) HAS_LAST_FSYNC, /* has the latest node fsync mark? */ And, the scenarios for our rule are based on: [Term] F: fsync_mark, D: dentry_mark 1. inode(x) | CP | inode(x) | dnode(F) 2. inode(x) | CP | inode(F) | dnode(F) 3. inode(x) | CP | dnode(F) | inode(x) | inode(F) 4. inode(x) | CP | dnode(F) | inode(F) 5. CP | inode(x) | dnode(F) | inode(DF) 6. CP | inode(DF) | dnode(F) 7. CP | dnode(F) | inode(DF) 8. CP | dnode(F) | inode(x) | inode(DF) For example, #3, the three conditions should be changed as follows. inode(x) | CP | dnode(F) | inode(x) | inode(F) a) x o o o o b) x x x x o c) x o o x o If f2fs_sync_file stops ------^, it should write inode(F) --------------^ So, the need_inode_block_update should return true, since c) get_nat_flag(e, HAS_LAST_FSYNC), is false. For example, #8, CP | alloc | dnode(F) | inode(x) | inode(DF) a) o x x x x b) x x x o c) o o x o If f2fs_sync_file stops -------^, it should write inode(DF) --------------^ Note that, the roll-forward policy should follow this rule, which means, if there are any missing blocks, we doesn't need to recover that inode. Signed-off-by: NHuang Ying <ying.huang@intel.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 16 9月, 2014 1 次提交
-
-
由 Jaegeuk Kim 提交于
Previously f2fs only counts dirty dentry pages, but there is no reason not to expand the scope. This patch changes the names on the management of dirty pages and to count dirty pages in each inode info as well. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 10 9月, 2014 1 次提交
-
-
由 Jaegeuk Kim 提交于
If any f2fs_bug_on is triggered, fsck.f2fs is needed. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 04 9月, 2014 1 次提交
-
-
由 Jaegeuk Kim 提交于
This patch adds three inline functions to clean up dirty casting codes. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 22 8月, 2014 2 次提交
-
-
由 Jaegeuk Kim 提交于
The init_inode_metadata calls truncate_blocks when error is occurred. The callers holds f2fs_lock_op, so we should not call it again in truncate_blocks. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
There are two rules when EIO is occurred. 1. don't write any checkpoint data to preserve the previous checkpoint 2. don't lose the cached dentry/node/meta pages So, at first, this patch adds set_page_dirty in f2fs_write_end_io's failure. Then, writing checkpoint/dentry/node blocks is not allowed. Note that, for the data pages, we can't just throw away by redirtying them. Otherwise, kworker can fall into infinite loop to flush them. (Ref. xfstests/019) Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 20 8月, 2014 2 次提交
-
-
由 Jaegeuk Kim 提交于
If mkwrite is called to an inode having inline_data, it can overwrite the data index space as NEW_ADDR. (e.g., the first 4 bytes are coincidently zero) Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 arter97 提交于
Fix typo and some grammatical errors. The words "filesystem" and "readahead" are being used without the space treewide. Signed-off-by: NPark Ju Hyung <qkrwngud825@gmail.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 02 8月, 2014 1 次提交
-
-
由 Chao Yu 提交于
This patch adds a tracepoint for f2fs_direct_IO. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 29 7月, 2014 2 次提交
-
-
由 Jaegeuk Kim 提交于
This patch introduces a inode number list in which represents inodes having appended data writes or updated data writes after last checkpoint. This will be used at fsync to determine whether the recovery information should be written or not. Reviewed-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Jaegeuk Kim 提交于
This patch adds a mount option, nobarrier, in f2fs. The assumption in here is that file system keeps the IO ordering, but doesn't care about cache flushes inside the storages. Reviewed-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 25 7月, 2014 1 次提交
-
-
由 Huang Ying 提交于
Otherwise, if a large amount of direct IO writes were done, the segment allocation may be failed because no enough segments are gced. Changes: v2: add f2fs_balance_fs into __get_data_block instead of f2fs_direct_IO. Signed-off-by: NHuang, Ying <ying.huang@intel.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 10 7月, 2014 2 次提交
-
-
由 Chao Yu 提交于
When we fail in ->write_begin()/->direct_IO(), our allocated node block in disk and page cache are still kept, despite these may not be used again. This patch introduce f2fs_write_failed() to handle the error case of these two interfaces, it will truncate page cache and blocks of this file according to i_size. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
由 Chao Yu 提交于
We have already set page update in ->write_begin, so we should remove redundant SetPageUptodate in ->write_end. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 23 6月, 2014 1 次提交
-
-
由 Jaegeuk Kim 提交于
Previous get_block in f2fs didn't report the newly allocated region which has NEW_ADDR. For reader, it should not report, but fiemap needs this. So, this patch introduces two get_block sharing core function. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 08 6月, 2014 1 次提交
-
-
由 Jaegeuk Kim 提交于
This patch links f2fs_fiemap with generic function with get_block. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 04 6月, 2014 1 次提交
-
-
由 Jaegeuk Kim 提交于
If data are overwritten through dio, previous f2fs doesn't remain the fsync mark due to no additional node writes. Note that this patch should resolve the xfstests:311. Signed-off-by: NJaegeuk Kim <jaegeuk@kernel.org>
-
- 07 5月, 2014 8 次提交
-
-
由 Chao Yu 提交于
This patch adds a tracepoint for f2fs_read_data_page to trace when page is readed by user. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Chao Yu 提交于
This patch adds a tracepoint for f2fs_write_{meta,node,data}_pages to trace when pages are fsyncing/flushing. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Chao Yu 提交于
This patch adds a tracepoint for f2fs_write_{meta,node,data}_page to trace when page is writting out. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Chao Yu 提交于
This patch adds a tracepoint for f2fs_write_end to trace write op of user. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Chao Yu 提交于
This patch adds a tracepoint for f2fs_write_begin to trace write op of user. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Jaegeuk Kim 提交于
This patch reduces the lock granularity during write_begin. When the system is under memory pressure, it would be better to reduce the locking time for the data pages. Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Jaegeuk Kim 提交于
We don't need to wait on page writeback for these cases. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-
由 Chao Yu 提交于
Introduce help macro ADDRS_PER_PAGE() to get the number of address pointers in direct node or inode. Signed-off-by: NChao Yu <chao2.yu@samsung.com> Signed-off-by: NJaegeuk Kim <jaegeuk.kim@samsung.com>
-