- 22 11月, 2014 20 次提交
-
-
由 Richard Alpe 提交于
Add TIPC_NL_MEDIA_SET command to the new tipc netlink API. This command can set one or more link properties for a particular media. Netlink logical layout of bearer set message: -> media -> name -> link properties [ -> tolerance ] [ -> priority ] [ -> window ] Signed-off-by: NRichard Alpe <richard.alpe@ericsson.com> Reviewed-by: NErik Hugne <erik.hugne@ericsson.com> Reviewed-by: NJon Maloy <jon.maloy@ericsson.com> Acked-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Alpe 提交于
Add TIPC_NL_MEDIA_GET command to the new tipc netlink API. This command supports dumping all information about all defined media as well as getting all information about a specific media. The information about a media includes name and link properties. Netlink logical layout of media get response message: -> media -> name -> link properties -> tolerance -> priority -> window Signed-off-by: NRichard Alpe <richard.alpe@ericsson.com> Reviewed-by: NErik Hugne <erik.hugne@ericsson.com> Reviewed-by: NJon Maloy <jon.maloy@ericsson.com> Acked-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Alpe 提交于
Add TIPC_NL_LINK_RESET_STATS command to the new netlink API. This command resets the link statistics for a particular link. Netlink logical layout of link reset message: -> link -> name Signed-off-by: NRichard Alpe <richard.alpe@ericsson.com> Reviewed-by: NErik Hugne <erik.hugne@ericsson.com> Reviewed-by: NJon Maloy <jon.maloy@ericsson.com> Acked-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Alpe 提交于
Add TIPC_NL_LINK_SET to the new tipc netlink API. This command can set one or more link properties for a particular link. Netlink logical layout of link set message: -> link -> name -> properties [ -> tolerance ] [ -> priority ] [ -> window ] Signed-off-by: NRichard Alpe <richard.alpe@ericsson.com> Reviewed-by: NErik Hugne <erik.hugne@ericsson.com> Reviewed-by: NJon Maloy <jon.maloy@ericsson.com> Acked-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Alpe 提交于
Add TIPC_NL_LINK_GET command to the new tipc netlink API. This command supports dumping all information about all links (including the broadcast link) or getting all information about a specific link (not the broadcast link). The information about a link includes name, transmission info, properties and link statistics. As the tipc broadcast link is special we unfortunately have to treat it specially. It is a deliberate decision not to abstract the broadcast link on this (API) level. Netlink logical layout of link response message: -> port -> name -> MTU -> RX -> TX -> up flag -> active flag -> properties -> priority -> tolerance -> window -> statistics -> rx_info -> rx_fragments -> rx_fragmented -> rx_bundles -> rx_bundled -> tx_info -> tx_fragments -> tx_fragmented -> tx_bundles -> tx_bundled -> msg_prof_tot -> msg_len_cnt -> msg_len_tot -> msg_len_p0 -> msg_len_p1 -> msg_len_p2 -> msg_len_p3 -> msg_len_p4 -> msg_len_p5 -> msg_len_p6 -> rx_states -> rx_probes -> rx_nacks -> rx_deferred -> tx_states -> tx_probes -> tx_nacks -> tx_acks -> retransmitted -> duplicates -> link_congs -> max_queue -> avg_queue Signed-off-by: NRichard Alpe <richard.alpe@ericsson.com> Reviewed-by: NErik Hugne <erik.hugne@ericsson.com> Reviewed-by: NJon Maloy <jon.maloy@ericsson.com> Acked-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Alpe 提交于
Add TIPC_NL_PUBL_GET command to the new tipc netlink API. This command supports dumping of all publications for a specific socket. Netlink logical layout of request message: -> socket -> reference Netlink logical layout of response message: -> publication -> type -> lower -> upper Signed-off-by: NRichard Alpe <richard.alpe@ericsson.com> Reviewed-by: NErik Hugne <erik.hugne@ericsson.com> Reviewed-by: NJon Maloy <jon.maloy@ericsson.com> Acked-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Alpe 提交于
Add TIPC_NL_SOCK_GET command to the new tipc netlink API. This command supports dumping of all available sockets with their associated connection or publication(s). It could be extended to reply with a single socket if the NLM_F_DUMP isn't set. The information about a socket includes reference, address, connection information / publication information. Netlink logical layout of response message: -> socket -> reference -> address [ -> connection -> node -> socket [ -> connected flag -> type -> instance ] ] [ -> publication flag ] Signed-off-by: NRichard Alpe <richard.alpe@ericsson.com> Reviewed-by: NErik Hugne <erik.hugne@ericsson.com> Reviewed-by: NJon Maloy <jon.maloy@ericsson.com> Acked-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Alpe 提交于
Add TIPC_NL_BEARER_SET command to the new tipc netlink API. This command can set one or more link properties for a particular bearer. Netlink logical layout of bearer set message: -> bearer -> name -> link properties [ -> tolerance ] [ -> priority ] [ -> window ] Signed-off-by: NRichard Alpe <richard.alpe@ericsson.com> Reviewed-by: NErik Hugne <erik.hugne@ericsson.com> Reviewed-by: NJon Maloy <jon.maloy@ericsson.com> Acked-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Alpe 提交于
Add TIPC_NL_BEARER_GET command to the new tipc netlink API. This command supports dumping all data about all bearers or getting all information about a specific bearer. The information about a bearer includes name, link priorities and domain. Netlink logical layout of bearer get message: -> bearer -> name Netlink logical layout of returned bearer information: -> bearer -> name -> link properties -> priority -> tolerance -> window -> domain Signed-off-by: NRichard Alpe <richard.alpe@ericsson.com> Reviewed-by: NErik Hugne <erik.hugne@ericsson.com> Reviewed-by: NJon Maloy <jon.maloy@ericsson.com> Acked-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Richard Alpe 提交于
A new netlink API for tipc that can disable or enable a tipc bearer. The new API is separated from the old API because of a bug in the user space client (tipc-config). The problem is that older versions of tipc-config has a very low receive limit and adding commands to the legacy genl_opts struct causes the ctrl_getfamily() response message to grow, subsequently breaking the tool. The new API utilizes netlink policies for input validation. Where the top-level netlink attributes are tipc-logical entities, like bearer. The top level entities then contain nested attributes. In this case a name, nested link properties and a domain. Netlink commands implemented in this patch: TIPC_NL_BEARER_ENABLE TIPC_NL_BEARER_DISABLE Netlink logical layout of bearer enable message: -> bearer -> name [ -> domain ] [ -> properties -> priority ] Netlink logical layout of bearer disable message: -> bearer -> name Signed-off-by: NRichard Alpe <richard.alpe@ericsson.com> Reviewed-by: NErik Hugne <erik.hugne@ericsson.com> Reviewed-by: NJon Maloy <jon.maloy@ericsson.com> Acked-by: NYing Xue <ying.xue@windriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Daniel Borkmann 提交于
It's just silly to hold the skb destructor argument around inside skb->cb[] as we currently do in SCTP. Nowadays, we're sort of cheating on data accounting in the sense that due to commit 4c3a5bda ("sctp: Don't charge for data in sndbuf again when transmitting packet"), we orphan the skb already in the SCTP output path, i.e. giving back charged data memory, and use a different destructor only to make sure the sk doesn't vanish on skb destruction time. Thus, cb[] is still valid here as we operate within the SCTP layer. (It's generally actually a big candidate for future rework, imho.) However, storing the destructor in the cb[] can easily cause issues should an non sctp_packet_set_owner_w()'ed skb ever escape the SCTP layer, since cb[] may get overwritten by lower layers and thus can corrupt the chunk pointer. There are no such issues at present, but lets keep the chunk in destructor_arg, as this is the actual purpose for it. Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Acked-by: NVlad Yasevich <vyasevich@gmail.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Willem de Bruijn 提交于
When sending packets out with PF_PACKET, SOCK_RAW, ensure that the packet is at least as long as the device's expected link layer header. This check already exists in tpacket_snd, but not in packet_snd. Also rate limit the warning in tpacket_snd. Signed-off-by: NWillem de Bruijn <willemb@google.com> Acked-by: NEric Dumazet <edumazet@google.com> Acked-by: NDaniel Borkmann <dborkman@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
This tc action allows to work with vlan tagged skbs. Two supported sub-actions are header pop and header push. Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NJamal Hadi Salim <jhs@mojatatu.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
So it can be used from out of openvswitch code. Did couple of cosmetic changes on the way, namely variable naming and adding support for 8021AD proto. Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
note that skb_make_writable already exists in net/netfilter/core.c but does something slightly different. Suggested-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NJiri Pirko <jiri@resnulli.us> Acked-by: NPravin B Shelar <pshelar@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Use them to push skb->vlan_tci into the payload and avoid code duplication. Signed-off-by: NJiri Pirko <jiri@resnulli.us> Acked-by: NPravin B Shelar <pshelar@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Name fits better. Plus there's going to be introduced __vlan_insert_tag later on. Signed-off-by: NJiri Pirko <jiri@resnulli.us> Acked-by: NPravin B Shelar <pshelar@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Always returns the same skb it gets, so change to void. Signed-off-by: NJiri Pirko <jiri@resnulli.us> Acked-by: NPravin B Shelar <pshelar@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jiri Pirko 提交于
Replace duplicated code by calling skb_postpull_rcsum Suggested-by: NEric Dumazet <eric.dumazet@gmail.com> Signed-off-by: NJiri Pirko <jiri@resnulli.us> Acked-by: NPravin B Shelar <pshelar@nicira.com> Acked-by: NSimon Horman <simon.horman@netronome.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Alexander Couzens 提交于
Signed-off-by: NAlexander Couzens <lynxis@fe80.eu> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 20 11月, 2014 6 次提交
-
-
由 Al Viro 提交于
... and do the same on the compat side of things. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
use {compat_,}rw_copy_check_uvector(). As the result, we are guaranteed that all iovecs seen in ->msg_iov by ->sendmsg() and ->recvmsg() will pass access_ok(). Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Al Viro 提交于
Kernel-side struct msghdr is (currently) using the same layout as userland one, but it's not a one-to-one copy - even without considering 32bit compat issues, we have msg_iov, msg_name and msg_control copied to kernel[1]. It's fairly localized, so we get away with a few functions where that knowledge is needed (and we could shrink that set even more). Pretty much everything deals with the kernel-side variant and the few places that want userland one just use a bunch of force-casts to paper over the differences. The thing is, kernel-side definition of struct msghdr is *not* exposed in include/uapi - libc doesn't see it, etc. So we can add struct user_msghdr, with proper annotations and let the few places that ever deal with those beasts use it for userland pointers. Saner typechecking aside, that will allow to change the layout of kernel-side msghdr - e.g. replace msg_iov/msg_iovlen there with struct iov_iter, getting rid of the need to modify the iovec as we copy data to/from it, etc. We could introduce kernel_msghdr instead, but that would create much more noise - the absolute majority of the instances would need to have the type switched to kernel_msghdr and definition of struct msghdr in include/linux/socket.h is not going to be seen by userland anyway. This commit just introduces user_msghdr and switches the few places that are dealing with userland-side msghdr to it. [1] actually, it's even trickier than that - we copy msg_control for sendmsg, but keep the userland address on recvmsg. Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
-
由 Markus Elfring 提交于
The __module_get() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Markus Elfring 提交于
The proc_remove() function tests whether its argument is NULL and then returns immediately. Thus the test around the call is not needed. This issue was detected by using the Coccinelle software. Signed-off-by: NMarkus Elfring <elfring@users.sourceforge.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Eric Dumazet 提交于
While working on sk_forward_alloc problems reported by Denys Fedoryshchenko, we found that tcp connect() (and fastopen) do not call sk_wmem_schedule() for SYN packet (and/or SYN/DATA packet), so sk_forward_alloc is negative while connect is in progress. We can fix this by calling regular sk_stream_alloc_skb() both for the SYN packet (in tcp_connect()) and the syn_data packet in tcp_send_syn_data() Then, tcp_send_syn_data() can avoid copying syn_data as we simply can manipulate syn_data->cb[] to remove SYN flag (and increment seq) Instead of open coding memcpy_fromiovecend(), simply use this helper. This leaves in socket write queue clean fast clone skbs. This was tested against our fastopen packetdrill tests. Reported-by: NDenys Fedoryshchenko <nuclearcat@nuclearcat.com> Signed-off-by: NEric Dumazet <edumazet@google.com> Acked-by: NYuchung Cheng <ycheng@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 19 11月, 2014 8 次提交
-
-
由 Rick Jones 提交于
If icmp_rcv() has successfully processed the incoming ICMP datagram, we should use consume_skb() rather than kfree_skb() because a hit on the likes of perf -e skb:kfree_skb is not called-for. Signed-off-by: NRick Jones <rick.jones2@hp.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabian Frederick 提交于
Also remove spaces after cast. Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabian Frederick 提交于
Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabian Frederick 提交于
Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabian Frederick 提交于
Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabian Frederick 提交于
Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabian Frederick 提交于
See Documentation/CodingStyle chapter 6. Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabian Frederick 提交于
Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 11月, 2014 5 次提交
-
-
由 Eric Dumazet 提交于
RSS (Receive Side Scaling) typically uses Toeplitz hash and a 40 or 52 bytes RSS key. Some drivers use a constant (and well known key), some drivers use a random key per port, making bonding setups hard to tune. Well known keys increase attack surface, considering that number of queues is usually a power of two. This patch provides infrastructure to help drivers doing the right thing. netdev_rss_key_fill() should be used by drivers to initialize their RSS key, even if they provide ethtool -X support to let user redefine the key later. A new /proc/sys/net/core/netdev_rss_key file can be used to get the host RSS key even for drivers not providing ethtool -x support, in case some applications want to precisely setup flows to match some RX queues. Tested: myhost:~# cat /proc/sys/net/core/netdev_rss_key 11:63:99:bb:79:fb:a5:a7:07:45:b2:20:bf:02:42:2d:08:1a:dd:19:2b:6b:23:ac:56:28:9d:70:c3:ac:e8:16:4b:b7:c1:10:53:a4:78:41:36:40:74:b6:15:ca:27:44:aa:b3:4d:72 myhost:~# ethtool -x eth0 RX flow hash indirection table for eth0 with 8 RX ring(s): 0: 0 1 2 3 4 5 6 7 RSS hash key: 11:63:99:bb:79:fb:a5:a7:07:45:b2:20:bf:02:42:2d:08:1a:dd:19:2b:6b:23:ac:56:28:9d:70:c3:ac:e8:16:4b:b7:c1:10:53:a4:78:41 Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabian Frederick 提交于
kcalloc manages count*sizeof overflow. Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabian Frederick 提交于
kmalloc_array manages count*sizeof overflow. Signed-off-by: NFabian Frederick <fabf@skynet.be> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Fabian Frederick 提交于
Signed-off-by: NFabian Frederick <fabf@skynet.be> Acked-by: NPravin B Shelar <pshelar@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Holger Brunck 提交于
There is no reason to limit the amount of possible links to a neighboring node to 2. If we have more then two bearers we can also establish more links. Signed-off-by: NHolger Brunck <holger.brunck@keymile.com> Reviewed-By: NJon Maloy <jon.maloy@ericsson.com> cc: Ying Xue <ying.xue@windriver.com> cc: Erik Hugne <erik.hugne@ericsson.com> cc: netdev@vger.kernel.org Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 11月, 2014 1 次提交
-
-
由 Pravin B Shelar 提交于
Add dependency on INET to fix following build error. I have also fixed MPLS dependency. ERROR: "ip_route_output_flow" [net/openvswitch/openvswitch.ko] undefined! make[1]: *** [__modpost] Error 1 Reported-by: NJim Davis <jim.epost@gmail.com> Signed-off-by: NPravin B Shelar <pshelar@nicira.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-