- 24 6月, 2008 1 次提交
-
-
由 Abhishek Sagar 提交于
Let records identified as being kprobe'd be marked as "frozen". The trouble with records which have a kprobe installed on their mcount call-site is that they don't get updated. So if such a function which is currently being traced gets its tracing disabled due to a new filter rule (or because it was added to the notrace list) then it won't be updated and continue being traced. This patch allows scanning of all frozen records during tracing to check if they should be traced. Signed-off-by: NAbhishek Sagar <sagar.abhishek@gmail.com> Cc: Steven Rostedt <rostedt@goodmis.org> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 12 6月, 2008 1 次提交
-
-
由 Jiri Slaby 提交于
Do not print loglevel before "entries of %ld bytes". Move it to the previous pr_info. Signed-off-by: NJiri Slaby <jirislaby@gmail.com> Cc: Steven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 10 6月, 2008 1 次提交
-
-
由 Ankita Garg 提交于
Found that inspite of setting the current_tracer to "none", trace from the previous trace type continued to be collected. The patch below fixes this and causes the trace to be disabled when the "none" type is selected. Compile and boot tested the patch for functionality. Signed-off-by: NAnkita Garg <ankita@in.ibm.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 02 6月, 2008 1 次提交
-
-
由 Abhishek Sagar 提交于
Tracing functions via ftrace which have a kretprobe installed on them, can produce misleading output in their trace logs. E.g, consider the correct trace of the following sequence: do_IRQ() { ~ irq_enter(); ~ } Trace log (sample): <idle>-0 [00] 4154504455.781616: irq_enter <- do_IRQ But if irq_enter() has a kretprobe installed on it, the return value stored on the stack at each invocation is modified to divert the return to a kprobe trampoline function called kretprobe_trampoline(). So with this the trace would (currently) look like: <idle>-0 [00] 4154504455.781616: irq_enter <- kretprobe_trampoline Now this is quite misleading to the end user, as it suggests something that didn't actually happen. So just to avoid such misinterpretations, the inlined patch aims to output such a log as: <idle>-0 [00] 4154504455.781616: irq_enter <- [unknown/kretprobe'd] Signed-off-by: NAbhishek Sagar <sagar.abhishek@gmail.com> Acked-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
- 27 5月, 2008 3 次提交
-
-
由 Steven Rostedt 提交于
The new work with converting the trace hooks over to markers broke the command line recording of ftrace. This patch fixes it again. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Mathieu Desnoyers <mathieu.desnoyers@polymtl.ca> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Steven Rostedt 提交于
Move the ftrace_special out of sched_switch to trace.c. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Cc: pq@iki.fi Cc: proski@gnu.org Cc: sandmann@redhat.com Cc: a.p.zijlstra@chello.nl Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Steven Rostedt 提交于
The check_pages function is called often enough that it can cause problems with trace outputs or even bringing the system to a halt. This patch limits the check_pages to the places that are most likely to have problems. The check is made at the flip between the global array and the max save array, as well as when the size of the buffers changes and the self tests. This patch also removes the BUG_ON from check_pages and replaces it with a WARN_ON and disabling of the tracer. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Cc: pq@iki.fi Cc: proski@gnu.org Cc: sandmann@redhat.com Cc: a.p.zijlstra@chello.nl Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
- 24 5月, 2008 33 次提交
-
-
由 Ingo Molnar 提交于
Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Steven Rostedt 提交于
Currently there is no protection from the root user to use up all of memory for trace buffers. If the root user allocates too many entries, the OOM killer might start kill off all tasks. This patch adds an algorith to check the following condition: pages_requested > (freeable_memory + current_trace_buffer_pages) / 4 If the above is met then the allocation fails. The above prevents more than 1/4th of freeable memory from being used by trace buffers. To determine the freeable_memory, I made determine_dirtyable_memory in mm/page-writeback.c global. Special thanks goes to Peter Zijlstra for suggesting the above calculation. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Pekka Paalanen 提交于
Refactor code from tracing_read_pipe() and create trace_seq_to_user(). Moved trace_seq_reset() call before iter->trace->read() call so that when all leftover data is returned, trace_seq is reset automatically. Signed-off-by: NPekka Paalanen <pq@iki.fi> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Steven Rostedt 提交于
In resetting the iterator in read_pipe, the reset of pos was postitioned in the wrong location with respect to the memset operation. The current code sets pos, incorrectly, to zero. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Steven Rostedt 提交于
This patch adds a method for open_pipe and open_read to the pluggins so that they can add a header to the trace pipe call. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Steven Rostedt 提交于
This patch sets up the infrastructure to record overruns of the tracing buffer. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Steven Rostedt 提交于
In cleaning up of the sched_switch code, the function trace recording of task comms was removed. This patch adds back the recording of comms for function trace. The output of ftrace now has the task comm instead of <...>. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Steven Rostedt 提交于
This is first installment of adding documentation to the ftrace. Expect many more patches of this kind in the near future. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Steven Rostedt 提交于
Currently ftrace allocates a trace buffer for every possible CPU. Work is being done to change it to only online CPUs and add hooks to hotplug CPUS. This patch lays out the infrastructure for such a change. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Steven Rostedt 提交于
Andrew Morton suggested using strict_strtoul over simple_strtoul. This patch replaces them in ftrace. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Steven Rostedt 提交于
Andrew Morton mentioned some clean ups that should be done to ftrace. This patch does some of the simple clean ups. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
no code changed. Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Thomas Gleixner 提交于
simplify hex to ascii conversion. Signed-off-by: NThomas Gleixner <tglx@linutronix.de> Signed-off-by: NIngo Molnar <mingo@elte.hu>
-
由 Steven Rostedt 提交于
This patch adds /debug/tracing/trace_entries that allows users to see as well as modify the number of trace entries the buffers hold. The number of entries only increments in ENTRIES_PER_PAGE which is calculated by the size of an entry with the number of entries that can fit in a page. The user does not need to use an exact size, but the entries will be rounded to one of the increments. Trying to set the entries to 0 will return with -EINVAL. To avoid race conditions, the modification of the buffer size can only be done when tracing is completely disabled (current_tracer == none). A info message will be printed if a user tries to modify the buffer size when not set to none. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Steven Rostedt 提交于
This patch implements "NONBLOCK" for trace_pipe. If the trace_pipe is opened with O_NONBLOCK, then the trace_pipe read will not block when buffer is empty. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Steven Rostedt 提交于
Break out of while loop with EOF when the current_trace changes. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Steven Rostedt 提交于
The trace iterator is reset in the read. We still need to restore the tracer that the trace_pipe was opened with. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Steven Rostedt 提交于
We expect things like "cat" to block on reads to trace_pipe. That's what trace_pipe is for. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ankita Garg 提交于
The conversion of task states to a character in the sched_switch tracer (part of latency tracer infrastructure), seems to be incorrect. We currently do it by indexing into the state_to_char array using the state value. The state values do not map directly into the array index and are thus incorrect. The following patch addresses this issue. This is also what is being done even in the show_task() routine in kernel/sched.c The patch has been compile and run tested. Signed-off-by: NAnkita Garg <ankita@in.ibm.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Thomas Gleixner 提交于
picked from the mmiotracer patches to distangle the patch queues. Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Steven Rostedt 提交于
If the trace output changes on reading the trace files, there is a chance that the start function will return NULL. If the start function of a sequence returns NULL the stop equivalent is not called. In this case, all locks that are taken must be released even if they are released in the stop function. This patch fixes a case that a mutex was not released on return of NULL in the start sequence function. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Steven Rostedt 提交于
Lock debugging enabled cause huge performance problems for tracing. Having the lock verification happening for every function that is called because mcount calls spin_lock can cripple the system. This patch converts the spin_locks used by ftrace into raw_spin_locks. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Steven Rostedt 提交于
trace_function is called by mcount and calling wake_up from that can have unpredictable results. This patch removes the wakeup from trace_function. Signed-off-by: NSteven Rostedt <srostedt@redhat.com> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Peter Zijlstra 提交于
Signed-off-by: NPeter Zijlstra <a.p.zijlstra@chello.nl> Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-
由 Ingo Molnar 提交于
Signed-off-by: NIngo Molnar <mingo@elte.hu> Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
-