* Rename ide_noacpi{tfs,onboot} to ide_acpi{gtf,onboot} (+ reverse logic).

* Move ide_*acpi* variables to ide-acpi.c and remove unnecessary initializers.

* Add "noacpi" / "acpigtf" / "acpionboot" parameters.

* Obsolete "ide=noacpi" / "ide=acpigtf" / "ide=acpionboot" kernel parameters.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Remove obsoleted "hdx=autotune" kernel parameter
  (we always auto-tune PIO if possible nowadays).

* Remove no longer needed ide_drive_t.autotune flag.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Don't set IDE_HFLAG_NO_AUTOTUNE host flag in sgiioc4 and icside
  host drivers - there is no need for it as they don't implement
  ->set_pio_mode method.

* Remove no longer needed IDE_HFLAG_NO_AUTOTUNE host flag.

There should be no functional changes caused by this patch.
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add "vlb_clock=" parameter for specifying VLB clock frequency (in MHz).

* Add "pci_clock=" parameter for specifying PCI bus clock frequency (in MHz).

While at it:

* qd65xx.c: rename {active,recovery}_cycle variables to {act,rec}_cyc.

Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Remove obsoleted "hdx=noautotune" kernel parameter
(it has been obsoleted since 1 Nov 2004).

Then make ide_hwif_t.autotune a single bit flag
and remove no longer needed IDE_TUNE_* defines.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Remove obsoleted "idex=reset" kernel parameter
(it has been obsoleted since 1 Nov 2004).

Then remove corresponding code from ide_probe_port()
and no longer used ->reset field from ide_hwif_t.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add "ignore_cable" parameter:

* "ide_core.ignore_cable=[interface_number]" boot option if IDE is built-in
  (i.e. "ide_core.ignore_cable=1" to force ignoring cable for "ide1")

* "ignore_cable=[interface_number]" module parameter (for ide_core module)
  if IDE is compiled as module

v2:
* Add ide_port_apply_params() helper
  - use it in ide_device_add_all() and ide_scan_port().

* Make it possible to later disable ignoring cable detection by passing
  "[interface_number]:0" to /sys/module/ide_core/parameters/ignore_cable
  (however sysfs interface is not enabled yet since it needs some other
   IDE changes to make it work reliable).
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Export ide_dma_exec_cmd() and __ide_dma_test_irq().

* Constify struct ide_dma_ops.

* Always set hwif->dma_ops to &sff_dma_ops in ide_setup_dma()
  (it is later overriden by ide_init_port() if needed) and drop
  'const struct ide_port_info *d' argument.

While at it:

* Rename __ide_dma_test_irq() to ide_dma_test_irq().
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add struct ide_dma_ops and convert core code + drivers to use it.

While at it:

* Drop "ide_" prefix from ->ide_dma_end and ->ide_dma_test_irq methods.

* Drop "ide_" "infixes" from DMA methods.

* au1xxx-ide.c:
  - use auide_dma_{test_irq,end}() directly in auide_dma_timeout()

* pdc202xx_old.c:
  - drop "old_" "infixes" from DMA methods

* siimage.c:
  - add siimage_dma_test_irq() helper
  - print SATA warning in siimage_init_one()

* Remove no longer needed ->init_hwif implementations.

v2:
* Changes based on review from Sergei:
  - s/siimage_ide_dma_test_irq/siimage_dma_test_irq/
  - s/drive->hwif/hwif/ in idefloppy_pc_intr().
  - fix patch description w.r.t. au1xxx-ide changes
  - fix au1xxx-ide build
  - fix naming for cmd64*_dma_ops
  - drop "ide_" and "old_" infixes
  - s/hpt3xxx_dma_ops/hpt37x_dma_ops/
  - s/hpt370x_dma_ops/hpt370_dma_ops/
  - use correct DMA ops for HPT302/N, HPT371/N and HPT374
  - s/it821x_smart_dma_ops/it821x_pass_through_dma_ops/

v3:
* Two bugs slipped in v2 (noticed by Sergei):
  - use correct DMA ops for HPT374 (for real this time)
  - handle HPT370/HPT370A properly
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add IDE_HFLAG_SERIALIZE_DMA host flag to serialize ports
  if DMA is available and handle it in ide_init_port().

* Convert sl82c105 host driver to use this new flag.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Make ide_hwif_setup_dma() return an error value.

* Pass 'const struct ide_port_info *d' instead of 'unsigned long dmabase'
  to ->init_dma method and make it return an error value.

* Rename ide_get_or_set_dma_base() to ide_pci_dma_base(),
  change ordering of its arguments and then export it.

* Export ide_pci_set_master().

* Do complete DMA setup inside ->init_dma method and update ->init_dma
  users accordingly.

* Sanitize code for DMA setup in ide_init_port().

v2:
* Fix for CONFIG_BLK_DEV_IDEDMA_PCI=n configs
  (from Jiri Slaby <jirislaby@gmail.com>):

  Fix following compiler warning by returning EINVAL:

  In file included from ANYTHING-INCLUDING-IDE.H:45:
  include/linux/ide.h: In function ‘ide_hwif_setup_dma’:
  include/linux/ide.h:1022: warning: no return statement in function returning non-void

Cc: Jiri Slaby <jirislaby@gmail.com>
Cc: Andrew Morton <akpm@linux-foundation.org>
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Export ide_allocate_dma_engine() and use it in trm290 host driver.
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Use hwif->name instead of cds->name in ide_allocate_dma_engine().

* Use pci_name(dev) instead of cds->name in init_dma_pdc202xx().

* Remove no longer needed ->cds field from ide_hwif_t.

v2:

* scc_pata.c also needs to be updated now (noticed by Stephen Rothwell).

There should be no functional changes caused by this patch.

Cc: Kou Ishizaki <kou.ishizaki@toshiba.co.jp>
Cc: Akira Iguchi <akira2.iguchi@toshiba.co.jp>
Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Always setup hwif->extra_base in ide_iomio_dma() and remove
no longer needed ->extra field from struct ide_port_info.

There should be no functional changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Remove no longer used ide_hwif_request_regions() and hwif_request_region().
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Reserve PCI BARs 0-3 (0-1 for single port controllers) in
  ide_pci_enable() and remove ide_hwif_request_regions() call
  from ide_device_add_all() (also cleanup resource management
  in scc_pata host driver).

* Fix handling of PCI BAR 4 in ide_pci_enable(), then cleanup
  ide_iomio_dma() (+ init_hwif_trm290() in trm290 host driver)
  and remove ide_release[_iomio]_dma().

v2:
* Fixup trm290 host driver.

v3:
* Because of scc_pata host driver changes we need to call
  pci_request_selected_regions() also in setup_mmio_scc().
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

All host drivers using ide_unregister()/module_exit() have been fixed
to manage resources themselves so this function can be removed now.

There should be no functional changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add 'unsigned long config' argument to ide_legacy_device_add()
  for setting hwif->config_data.

* Use ide_find_port_slot() instead of ide_find_port() in
  ide_legacy_device_add().

* Handle IDE_HFLAG_QD_2ND_PORT and IDE_HFLAG_SINGLE host flags in
  ide_legacy_device_add().

* Convert qd65xx host driver to use ide_legacy_device_add().

v2:
* Update ali14xx, dtc2278, ht6560b and umc8672 host drivers.

There should be no functional changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add ide_legacy_device_add() helper for use by legacy VLB host drivers
(+ convert them to use it).

There should be no functional changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Update IDE PMAC host driver to use drive->noprobe instead of hwif->noprobe
and remove hwif->noprobe completely (it is always set to zero now).

There should be no functional changes caused by this patch.

Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Move hooks for port/host specific methods from ide_hwif_t to
  'struct ide_port_ops'.

* Add 'const struct ide_port_ops *port_ops' to 'struct ide_port_info'
  and ide_hwif_t.

* Update host drivers and core code accordingly.

While at it:

* Rename ata66_*() cable detect functions to *_cable_detect() to match
  the standard naming. (Suggested by Sergei Shtylyov)

v2:
* Fix build for bast-ide. (Noticed by Andrew Morton)
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

All host drivers now either set hwif->mmio or reserve continuous
I/O resources so remove no longer needed hwif->straight8 flag
and never reached code for 'hwif->straight8 == 0' case.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Sergei suggested that it shouldn't be necessary + it had no effect
anyway since ide_id_dma_bug() is called earlier in ide_tune_dma().

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add IDE_HFLAG_QD_2ND_PORT host flag to indicate the need of skipping
  first ide_hwifs[] slot for the second port of QD65xx controller.

* Handle this new host flag in ide_find_port_slot().

* Convert legacy VLB host drivers to use ide_find_port().

While at it:

* Fix couple of printk()-s in qd65xx host driver to not use hwif->name.

v2:
* Fix qd65xx.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Change ide_match_hwif() argument from 'u8 bootable' to
  'struct ide_port_info *d'.

* Move ide_match_hwif() to ide-probe.c from setup-pci.c and rename
  it to ide_find_port_slot().  Update some comments while at it.

* ide_find_port() can be now just a wrapper for ide_find_port_slot().

There should be no functional changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

No need for it nowadays so remove quirk code from ide_get_best_pio_mode()
and IDE_HFLAG_PIO_DOWNGRADE host flag.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

"bootable" should be the default behavior so replace
IDE_HFLAG_BOOTABLE host flag with IDE_HFLAG_NON_BOOTABLE.

There should be no functional changes caused by this patch.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Remove no longer needed matching against I/O base and 'base' argument.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

None of these files use any of the functionality promised by
asm/semaphore.h.  It's possible that they (or some user of them) rely
on it dragging in some unrelated header file, but I can't build all
these files, so we'll have to fix any build failures as they come up.
Signed-off-by: NMatthew Wilcox <willy@linux.intel.com>

* Add CONFIG_IDE_ARCH_OBSOLETE_DEFAULTS to drivers/ide/Kconfig and use
  it instead of defining IDE_ARCH_OBSOLETE_DEFAULTS in <arch/ide.h>.

v2:
* Define ide_default_irq() in ide-probe.c/ns87415.c if not already defined
  and drop defining ide_default_irq() for CONFIG_IDE_ARCH_OBSOLETE_DEFAULTS=n.

  [ Thanks to Stephen Rothwell and David Miller for noticing the problem. ]

Cc: Stephen Rothwell <sfr@canb.auug.org.au>
Cc: David Miller <davem@davemloft.net>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Signed-off-by: NBorislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

This new struct unifies ide{-floppy,-tape,-scsi}'s view of a packet command. For now,
it represents the common denominator between the three drivers while adding driver-
specific members at the end of the struct which will be merged/simplified into the
generic ATAPI handling code in later steps, or removed completely.

Bart:
- move struct ide_atapi_pc outside of #ifdef/#endif CONFIG_IDE_PROC_FS
Signed-off-by: NBorislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add IDE_{ALTSTATUS,IREASON,BCOUNTL,BCOUNTH}_OFFSET defines.

* Remove IDE_*_REG macros - this results in more readable
  and slightly smaller code.

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

Add ide_atapi_{discard_data,write_zeros} inline helpers to <linux/ide.h>
and use them instead of home-brewn helpers in ide-{floppy,tape,scsi}.

There should be no functional changes caused by this patch.

Cc: Borislav Petkov <petkovbb@gmail.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

ide_init_hwif_ports() is only used by init_ide_data() now, inline it there.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

->hold is write-only now, remove it.

v2:
* v1 missed bast-ide, palm_bk3710, ide-cs and delkin_cb host drivers.
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

hdparm explicitely marks HDIO_[UNREGISTER,SCAN]_HWIF ioctls as DANGEROUS
and given the number of bugs we can assume that there are no real users:

* DMA has no chance of working because DMA resources are released by
  ide_unregister() and they are never allocated again.

* Since ide_init_hwif_ports() is used for ->io_ports[] setup the ioctls
  don't work for almost all hosts with "non-standard" (== non ISA-like)
  layout of IDE taskfile registers (there is a lot of such host drivers).

* ide_port_init_devices() is not called when probing IDE devices so:
  - drive->autotune is never set and IDE host/devices are not programmed
    for the correct PIO/DMA transfer modes (=> possible data corruption)
  - host specific I/O 32-bit and IRQ unmasking settings are not applied
    (=> possible data corruption)
  - host specific ->port_init_devs method is not called (=> no luck with
    ht6560b, qd65xx and opti621 host drivers)

* ->rw_disk method is not preserved (=> no HPT3xxN chipsets support).

* ->serialized flag is not preserved (=> possible data corruption when
   using icside, aec62xx (ATP850UF chipset), cmd640, cs5530, hpt366
   (HPT3xxN chipsets), rz1000, sc1200, dtc2278 and ht6560b host drivers).

* ->ack_intr method is not preserved (=> needed by ide-cris, buddha,
  gayle and macide host drivers).

* ->sata_scr[] and sata_misc[] is cleared by ide_unregister() and it
  isn't initialized again (SiI3112 support needs them).

* To issue an ioctl() there need to be at least one IDE device present
  in the system.

* ->cable_detect method is not preserved + it is not called when probing
  IDE devices so cable detection is broken (however since DMA support is
  also broken it doesn't really matter ;-).

* Some objects which may have already been freed in ide_unregister()
  are restored by ide_hwif_restore() (i.e. ->hwgroup).

* ide_register_hw() may unregister unrelated IDE ports if free ide_hwifs[]
  slot cannot be found.

* When IDE host drivers are modular unregistered port may be re-used by
  different host driver that owned it first causing subtle bugs.

Since we now have a proper warm-plug support remove these ioctls,
then remove no longer needed:
- ide_register_hw() and ide_hwif_restore() functions
- 'init_default' and 'restore' arguments of ide_unregister()
- zeroeing of hwif->{dma,extra}_* fields in ide_unregister()

As an added bonus IDE core code size shrinks by ~3kB (x86-32).

v2:
* fix ide_unregister() arguments in cleanup_module() (Andrew Morton).

v3:
* fix ide_unregister() arguments in palm_bk3710.c.
Acked-by: NSergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Remove obsoleted "idex=base[,ctl[,irq]]" kernel parameters
  and update Documentation/ide/ide.txt.

* Remove no longer needed ide_forced chipset type.

v2:
* is_chipset_set[] -> is_chipset_set in ide.c.

* Documentation/ide/ide.txt fix.
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

* Add 'struct class ide_port_class' ('ide_port' class) and a 'struct
  device *portdev' ('ide_port' class device) in ide_hwif_t.

* Register 'ide_port' class in ide_init() and unregister it in
  cleanup_module().

* Create ->portdev in ide_register_port () and unregister it in
  ide_unregister().

* Add "delete_devices" class device attribute for unregistering IDE devices
  on a port and "scan" one for probing+registering IDE devices on a port.

* Add ide_sysfs_register_port() helper for registering "delete_devices"
  and "scan" attributes with ->portdev.  Call it in ide_device_add_all().

* Document IDE warm-plug support in Documentation/ide/warm-plug-howto.txt.

v2:
* Convert patch from using 'struct class_device' to use 'struct device'.
  (thanks to Kay Sievers for doing it)
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>

->busproc method is used by HDIO_SET_BUSSTATE ioctl but it has no chance
of working as intended (in 2.4.x days) because to issue an ioctl there
is a device node needed and:

- for BUSSTATE_TRISTATE+OFF it is too late (devices are already gone)

- for BUSSTATE_TRISTATE+ON it is too early (devices are not registered yet)

Just remove ->busproc method for now (it was only implemented by hpt366,
siimage and tc86c001 host drivers).

Cc: Sergei Shtylyov <sshtylyov@ru.mvista.com>
Signed-off-by: NBartlomiej Zolnierkiewicz <bzolnier@gmail.com>