without this patch after an rmmod, modprobe the card won't work anymore
until the next reboot.

This patch seem safe to apply for all cards as the bsd driver already do
that.

I had to add a timeout because strange things happen (issuecommand will
fail) if the card is already reseted (after a reboot).

PS : it seems there are missing reset when leaving monitor mode...
Signed-off-by: NMatthieu CASTET <castet.matthieu@free.fr>

Power management parameters could not be set by iwconfig due to
incorrect error handling.
Signed-off-by: NPavel Roskin <proski@gnu.org>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

ipw2100: Fix 'Driver using old /proc/net/wireless...' message

Wireless extensions moved the get_wireless_stats handler from being
in net_device into wireless_handler.

A prior instance of this patch resolved the issue for the ipw2200.
This one fixes it for the ipw2100.
Signed-off-by: NBenoit Boissinot <benoit.boissinot@ens-lyon.org>
Signed-off-by: NJames Ketrenos <jketreno@linux.intel.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

hermas_bap_pread,  hermes_bap_pwrite, and hermes_bap_pwrite_pad all have a parameter "len" that is declared unsigned,
but checked for a value less than zero. Auditing the callers, it is possible for len to be passed a negative value, so len should be an int.

Thanks to LinuxICC (http://linuxicc.sf.net)
Signed-off-by: NGabriel A. Devenyi <ace@staticwave.ca>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

In isl_38xx.c
In routine isl38xx_trigger-device

Move unnecessary udelay/register read.
This is only required when hand-compiling the driver and
setting  VERBOSE > SHOW_ERROR_MESSAGES
Signed-off-by: NRoger While <simrw@sim-basis.de>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

This fixes a slab corruption issue in the ipw2200 driver: it essentially
multiplied the error log number _twice_ by the size of the error element
entry (once explicitly in the code, and once implicitly as part of the
regular pointer arithmetic).

Cc: Henrik Brix Andersen <brix@gentoo.org>
Cc: Bernard Blackham <bernard@blackham.com.au>
Cc: Zilvinas Valinskas <zilvinas@gemtek.lt>
Cc: Pekka Enberg <penberg@cs.helsinki.fi>
Signed-off-by: NZhu Yi <yi.zhu@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>
--

The function ipw_request_direct_scan() should bail out when the device
is down.  This fixes a lockup caused by wpa_supplicant triggering
ipw_request_direct_scan() while the driver was in a middle of a reset
due to firmware errors.

Thanks to Zilvinas Valinskas for reporting the bug and helping me
debug it.
Signed-off-by: NPekka Enberg <penberg@cs.helsinki.fi>
Acked-by: NZhu Yi <yi.zhu@intel.com>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

* Merge PCMCIA card table with new Brodowski PCMCIA id table.
* Add missing entries to PCMCIA id table.
* Other tweaks to conform with Documentation/driver-changes.txt
  (types, call request_region, etc)
* Fix size of requested IO region.
* Reduce printk verbosity.
* Remove EXPERIMENTAL
* tweak to association code - don't force shared key authentication
  when wep in use.
Signed-off-by: NJeff Garzik <jgarzik@pobox.com>

This patch removes almost all inclusions of linux/version.h.  The 3
#defines are unused in most of the touched files.

A few drivers use the simple KERNEL_VERSION(a,b,c) macro, which is
unfortunatly in linux/version.h.

There are also lots of #ifdef for long obsolete kernels, this was not
touched.  In a few places, the linux/version.h include was move to where
the LINUX_VERSION_CODE was used.

quilt vi `find * -type f -name "*.[ch]"|xargs grep -El '(UTS_RELEASE|LINUX_VERSION_CODE|KERNEL_VERSION|linux/version.h)'|grep -Ev '(/(boot|coda|drm)/|~$)'`

search pattern:
/UTS_RELEASE\|LINUX_VERSION_CODE\|KERNEL_VERSION\|linux\/\(utsname\|version\).h
Signed-off-by: NOlaf Hering <olh@suse.de>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

More conversions of kmalloc/memset to kzalloc
Signed-off-by: NPanagiotis Issaris <takis@issaris.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Specify the correct range when calling memset in atmel_get_range.
Do this by specifying the size of the structure, rather than the size
of the pointer.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

Move update of the transmit statistics to the correct place.  This
would be just before starting transmission rather than (potentially
long) afterward.
Signed-off-by: NRoger While <simrw@sim-basis.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

In isl_38xx.c :
The variable "counter" is defined and incremented but never
used except if the driver is hand-compiled setting
VERBOSE > SHOW_ERROR_MESSAGES.
Move the definition and the increment to within the
#if VERBOSE ..   block.

Remove extraneous udelay's.
These are not required when triggering the device.
Signed-off-by: NRoger While <simrw@sim-basis.de>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

You can obtain the firmware at http://ipw2200.sf.net/firmware.phpSigned-off-by: NJames Ketrenos <jketreno@linux.intel.com>

Signed-off-by: NJames Ketrenos <jketreno@linux.intel.com>

Signed-off-by: NJames Ketrenos <jketreno@linux.intel.com>

Signed-off-by: NJames Ketrenos <jketreno@linux.intel.com>

configured.

Countermeasures default to being turned off when wpa_supplicant runs,
regardless of if TKIP is being used.  They are only turned on if a TKIP
is running.  The warning we were printing is therefore not needed.
Signed-off-by: NJames Ketrenos <jketreno@linux.intel.com>

Signed-off-by: NJames Ketrenos <jketreno@linux.intel.com>

Signed-off-by: NJames Ketrenos <jketreno@linux.intel.com>

Wireless extensions moved the get_wireless_stats handler from being
in net_device into wireless_handler.
Signed-off-by: NBenoit Boissinot <benoit.boissinot@ens-lyon.org>
Signed-off-by: NJames Ketrenos <jketreno@linux.intel.com>

Signed-off-by: NJames Ketrenos <jketreno@linux.intel.com>

Signed-off-by: NJames Ketrenos <jketreno@linux.intel.com>

The problem is caused by the patch in bug455 -- Channel change flood
generates fatal error.

The patch set the DISASSOCIATING status bit after sending the command.
The process was scheduled out when waiting for the command to be sent to
the card. The disassociated notification clears the DISASSOCIATING bit
in the tasklet before the process set the bit.

Move the bit setting code before sending the command now.
Signed-off-by: NHong Liu <hong.liu@intel.com>
Signed-off-by: NJames Ketrenos <jketreno@linux.intel.com>

Signed-off-by: NJames Ketrenos <jketreno@linux.intel.com>

Signed-off-by: NJames Ketrenos <jketreno@linux.intel.com>

The PF_SYNCTHREAD check was introduced to try and remain compatible with
SWSUSP2.  This check is no longer needed with newer versions.
Signed-off-by: NJames Ketrenos <jketreno@linux.intel.com>

Signed-off-by: NJames Ketrenos <jketreno@linux.intel.com>

error when it tries to auth to a WPA ap. The patch filters out WPA
networks if the card is not wpa enabled when selecting network to
associate to.
Signed-off-by: NHong Liu <hong.liu@intel.com>

Signed-off-by: NHong Liu <hong.liu@intel.com>

Signed-off-by: NJames Ketrenos <jketreno@linux.intel.com>

Signed-off-by: NMike Kershaw <dragorn@kismetwireless.net>
Signed-off-by: NJames Ketrenos <jketreno@linux.intel.com>

so you can cross-reference errno.h easily).
Signed-off-by: NPeter Jones <pjones@redhat.com>
Signed-off-by: NJames Ketrenos <jketreno@linux.intel.com>

Signed-off-by: NHong Liu <hong.liu@intel.com>

Signed-off-by: NZhu Yi <yi.zhu@intel.com>

Because of the frequent channel change, it is possible that when we are
try to associate with channel 1 (authenticated but not associated).
Another channel change comes at this time, then the driver will issue
disassociate command to the firmware which will cause the fatal error.

It seems that the association/disassociation procedure should not be
interrupted.

The patch attached adds test on STATUS_ASSOCIATING | STATUS_DISASSOCIATING
in ipw_send_cmd(), when ensures that commands will not be sent to firmware
when we are in these two status.
Signed-off-by: NHong Liu <hong.liu@intel.com>
Signed-off-by: NZhu Yi <yi.zhu@intel.com>