Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 10 6月, 2008 2 次提交
  3. 02 6月, 2008 4 次提交
    • A
      ftrace: export kretprobe_trampoline for function tracer · e0773410
      由 Abhishek Sagar 提交于 
      Follow suit from kprobe implementations on other archs and make kretprobe_trampoline non-static. Ftrace implmentation (more specifically, kernel/trace/trace.c) requires access to it (see-> http://kerneltrap.org/mailarchive/linux-kernel/2008/5/27/1955234).
Signed-off-by: NAbhishek Sagar <sagar.abhishek@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      e0773410
    • S
      ftrace: user update and disable dynamic ftrace daemon · ad90c0e3
      由 Steven Rostedt 提交于 
      In dynamic ftrace, the mcount function starts off pointing to a stub
function that just returns.

On start up, the call to the stub is modified to point to a "record_ip"
function. The job of the record_ip function is to add the function to
a pre-allocated hash list. If the function is already there, it simply is
ignored, otherwise it is added to the list.

Later, a ftraced daemon wakes up and calls kstop_machine if any functions
have been recorded, and changes the calls to the recorded functions to
a simple nop.  If no functions were recorded, the daemon goes back to sleep.

The daemon wakes up once a second to see if it needs to update any newly
recorded functions into nops.  Usually it does not, but if a lot of code
has been executed for the first time in the kernel, the ftraced daemon
will call kstop_machine to update those into nops.

The problem currently is that there's no way to stop the daemon from doing
this, and it can cause unneeded latencies (800us which for some is bothersome).

This patch adds a new file /debugfs/tracing/ftraced_enabled. If the daemon
is active, reading this will return "enabled\n" and "disabled\n" when the
daemon is not running. To disable the daemon, the user can echo "0" or
"disable" into this file, and "1" or "enable" to re-enable the daemon.

Since the daemon is used to convert the functions into nops to increase
the performance of the system, I also added that anytime something is
written into the ftraced_enabled file, kstop_machine will run if there
are new functions that have been detected that need to be converted.

This way the user can disable the daemon but still be able to control the
conversion of the mcount calls to nops by simply,

  "echo 0 > /debugfs/tracing/ftraced_enabled"

when they need to do more conversions.

To see the number of converted functions:

  "cat /debugfs/tracing/dyn_ftrace_total_info"
Signed-off-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      ad90c0e3
    • A
      ftrace: distinguish kretprobe'd functions in trace logs · 76094a2c
      由 Abhishek Sagar 提交于 
      Tracing functions via ftrace which have a kretprobe installed on them, can produce misleading output in their trace logs. E.g, consider the correct trace of the following sequence:

do_IRQ()
{
~
  irq_enter();
~
}

Trace log (sample):
<idle>-0     [00] 4154504455.781616: irq_enter <- do_IRQ

But if irq_enter() has a kretprobe installed on it, the return value stored on the stack at each invocation is modified to divert the return to a kprobe trampoline function called kretprobe_trampoline(). So with this the trace would (currently) look like:

<idle>-0     [00] 4154504455.781616: irq_enter <- kretprobe_trampoline

Now this is quite misleading to the end user, as it suggests something that didn't actually happen. So just to avoid such misinterpretations, the inlined patch aims to output such a log as:

<idle>-0     [00] 4154504455.781616: irq_enter <- [unknown/kretprobe'd]
Signed-off-by: NAbhishek Sagar <sagar.abhishek@gmail.com>
Acked-by: NSteven Rostedt <srostedt@redhat.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      76094a2c
    • A
      ftrace: core support for ARM · 014c257c
      由 Abhishek Sagar 提交于 
      Core ftrace support for the ARM architecture, which includes support
for dynamic function tracing.
Signed-off-by: NAbhishek Sagar <sagar.abhishek@gmail.com>
Signed-off-by: NIngo Molnar <mingo@elte.hu>
      014c257c
  5. 28 5月, 2008 1 次提交
  7. 27 5月, 2008 9 次提交
  9. 25 5月, 2008 1 次提交
  11. 24 5月, 2008 23 次提交