Split the ioctl handling out of inode.c into a file of it's own.
Also fix up checkpatch.pl warnings for the moved code.
Signed-off-by: NChristoph Hellwig <hch@lst.de>
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Btrfs has been using workqueues to spread the checksumming load across
other CPUs in the system.  But, workqueues only schedule work on the
same CPU that queued the work, giving them a limited benefit for systems with
higher CPU counts.

This code adds a generic facility to schedule work with pools of kthreads,
and changes the bio submission code to queue bios up.  The queueing is
important to make sure large numbers of procs on the system don't
turn streaming workloads into random workloads by sending IO down
concurrently.

The end result of all of this is much higher performance (and CPU usage) when
doing checksumming on large machines.  Two worker pools are created,
one for writes and one for endio processing.  The two could deadlock if
we tried to service both from a single pool.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

These ioctls let a user application hold a transaction open while it
performs a series of operations.  A final ioctl does a sync on the fs
(closing the current transaction).  This is the main requirement for
Ceph's OSD to be able to keep the data it's storing in a btrfs volume
consistent, and AFAICS it works just fine.  The application would do
something like

	fd = ::open("some/file", O_RDONLY);
	::ioctl(fd, BTRFS_IOC_TRANS_START);
	/* do a bunch of stuff */
	::ioctl(fd, BTRFS_IOC_TRANS_END);
or just
	::close(fd);

And to ensure it commits to disk,

	::ioctl(fd, BTRFS_IOC_SYNC);

When a transaction is held open, the trans_handle is attached to the
struct file (via private_data) so that it will get cleaned up if the
process dies unexpectedly.  A held transaction is also ended on fsync() to
avoid a deadlock.

A misbehaving application could also deliberately hold a transaction open,
effectively locking up the FS, so it may make sense to restrict something
like this to root or something.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

We need to invalidate an existing dcache entry after creating a new
snapshot or subvolume, because a negative dache entry will stop us from
accessing the new snapshot or subvolume.

---
  ctree.h       |   23 +++++++++++++++++++++++
  inode.c       |    4 ++++
  transaction.c |    4 ++++
  3 files changed, 31 insertions(+)
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Use btrfs_release_file instead of a put_inode call
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The extent_io writepage calls needed an extra check for discarding
pages that started on th last byte in the file.

btrfs_truncate_page needed checks to make sure the page was still part
of the file after reading it, and most importantly, needed to wait for
all IO to the page to finish before freeing the corresponding extents on
disk.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

When duplicate copies exist, writes are allowed to fail to one of those
copies.  This changeset includes a few changes that allow the FS to
continue even when some IOs fail.

It also adds verification of the parent generation number for btree blocks.
This generation is stored in the pointer to a block, and it ensures
that missed writes to are detected.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Once part of a delalloc request fails the cow checks, just cow the
entire range

It is possible for the back references to all be from the same root,
but still have snapshots against an extent.  The checks are now more strict,
forcing cow any time there are multiple refs against the data extent.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Before, nodatacow only checked to make sure multiple roots didn't have
references on a single extent.  This check makes sure that multiple
inodes don't have references.

nodatacow needed an extra check to see if the block group was currently
readonly.  This way cows forced by the chunk relocation code are honored.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This required a few structural changes to the code that manages bdev pointers:

The VFS super block now gets an anon-bdev instead of a pointer to the
lowest bdev.  This allows us to avoid swapping the super block bdev pointer
around at run time.

The code to read in the super block no longer goes through the extent
buffer interface.  Things got ugly keeping the mapping constant.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Add a new ioctl to clone file data
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

The generic O_DIRECT code assumes all the bios have the same bdev,
which isn't true for multi-device btrfs.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

btrfs_invalidatepage is not allowed to leave pages around on the lru.
Any such pages will trigger an oops later on because the VM will see
page->private and assume it is a buffer head.

This also forces extra flushes of the async work queues before
dropping all the pages on the btree inode during unmount.  Left over
items on the work queues are one possible cause of busy state ranges
during truncate_inode_pages.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

The data read retry code needs to find the logical disk block before it
can resubmit new bios.  But, finding this block isn't allowed to take
the fs_mutex because that will deadlock with a number of different callers.

This changes the retry code to use the extent map cache instead, but
that requires the extent map cache to have the extent we're looking for.
This is a problem because btrfs_drop_extent_cache just drops the entire
extent instead of the little tiny part it is invalidating.

The bulk of the code in this patch changes btrfs_drop_extent_cache to
invalidate only a portion of the extent cache, and changes btrfs_get_extent
to deal with the results.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This isn't required anymore because we don't reallocate blocks that
have already been written in this transaction.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This significantly improves streaming write performance by allowing
concurrency in the data checksumming.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

This allows checksumming to happen in parallel among many cpus, and
keeps us from bogging down pdflush with the checksumming code.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

On huge machines, delayed allocation may try to allocate massive extents.
This change allows btrfs_alloc_extent to return something smaller than
the caller asked for, and the data allocation routines will loop over
the allocations until it fills the whole delayed alloc.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

This adds basic O_DIRECT read and write support.  In the write case, we
just do a normal buffered write followed by a cache flush.  O_DIRECT +
O_SYNC are required to trigger metadata syncs.

In the read case, there is a basic btrfs_get_block call for use by
the generic O_DIRECT code.  This does honor multi-volume mapping rules
but it skips all checksumming.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Before it was done by the bio end_io routine, the work queue code is able
to scale much better with faster IO subsystems.
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

This allows intelligent versions of unplug and congestion functions
Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>

Signed-off-by: NChris Mason <chris.mason@oracle.com>