- 14 5月, 2008 15 次提交
-
-
由 Michael Ellerman 提交于
This is a little messier than I'd like because xmon.h only exists on powerpc and we can't have a static inline and an extern declaration visible at the same time. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
warning: Using plain integer as NULL pointer warning: Using plain integer as NULL pointer warning: symbol 'excprint' was not declared. Should it be static? warning: symbol 'prregs' was not declared. Should it be static? warning: symbol 'cacheflush' was not declared. Should it be static? warning: symbol 'read_spr' was not declared. Should it be static? warning: symbol 'write_spr' was not declared. Should it be static? warning: symbol 'super_regs' was not declared. Should it be static? warning: symbol 'mread' was not declared. Should it be static? warning: symbol 'mwrite' was not declared. Should it be static? warning: symbol 'byterev' was not declared. Should it be static? warning: symbol 'memex' was not declared. Should it be static? warning: symbol 'bsesc' was not declared. Should it be static? warning: symbol 'dump' was not declared. Should it be static? warning: symbol 'prdump' was not declared. Should it be static? warning: symbol 'generic_inst_dump' was not declared. Should it be static? warning: symbol 'ppc_inst_dump' was not declared. Should it be static? warning: symbol 'memops' was not declared. Should it be static? warning: symbol 'memdiffs' was not declared. Should it be static? warning: symbol 'memlocate' was not declared. Should it be static? warning: symbol 'memzcan' was not declared. Should it be static? warning: symbol 'proccall' was not declared. Should it be static? warning: symbol 'scannl' was not declared. Should it be static? warning: symbol 'hexdigit' was not declared. Should it be static? warning: symbol 'flush_input' was not declared. Should it be static? warning: symbol 'inchar' was not declared. Should it be static? warning: symbol 'take_input' was not declared. Should it be static? warning: symbol 'xmon_init' was not declared. Should it be static? Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
The typdef for irqreturn_t was moved into its own header a while back, so there's no reason we can't move xmon_irq() into xmon.h now. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
Usually we call xmon() via debugger(), so this could be static. Sometimes when debugging it's nice to be able to call xmon() directly though, so add a declaration. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
Some of the routines defined in mpic_msi.c are declared mpic.h, so the former should include the latter. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
Somewhere along the way (e28f7faf, "Four level pagetables for ppc64") we ended up with duplicate definitions for pte_freelist_cur and pte_freelist_force_free. Somehow this compiles, but it would be better to just have one definition for each. The two definitions we end up with can be static too! Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
... instead of having extern declarations in a .c file. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
Make two vmemmap helpers static in init_64.c Make stab variables static in stab.c Make psize defs static in hash_utils_64.c Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Michael Ellerman 提交于
... instead of having an extern declaration in a .c file. Signed-off-by: NMichael Ellerman <michael@ellerman.id.au> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Remi Machet 提交于
For each mv64360 entry in the OpenFirmware database, add the registration of an of_bus to take care of devices connected to the MV64x60 asynchronous devices controller. This change makes it possible for those devices to be detected by drivers that support the of_platform without having a custom call for each of them in the board file. Signed-off-by: NRemi Machet <rmachet@slac.stanford.edu> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Kumar Gala 提交于
We use the low bits of regs->trap as flag bits. We already indicate critical and machine check level exceptions via this mechanism. Extend it to indicate debug level exceptions. Signed-off-by: NKumar Gala <galak@kernel.crashing.org> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Roland McGrath 提交于
Replace TIF_RESTORE_SIGMASK with TLF_RESTORE_SIGMASK and define our own set_restore_sigmask() function. This saves the costly SMP-safe set_bit operation, which we do not need for the sigmask flag since TIF_SIGPENDING always has to be set too. Signed-off-by: NRoland McGrath <roland@redhat.com> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Olaf Hering 提交于
Create /sys/bus/of_platform/devices/*/modalias file to allow autoloading of modules. Modalias files are already present for many other bus types. This adds also a newline to the devspec files. Also create a devspec file for mac-io devices. They were created as a side effect. Use correct buffer size for mac-io modalias buffer. Tested on iBook1 and Efika. Signed-off-by: NOlaf Hering <olaf@aepfle.de> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Roel Kluin 提交于
bitmap_find_free_region(), called by mpic_msi_alloc_hwirqs() may return signed, but hwirq is unsigned. A failed allocation remains unnoticed. Signed-off-by: NRoel Kluin <12o3l@tiscali.nl> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
由 Roel Kluin 提交于
bitmap_find_free_region(), called by mpic_msi_alloc_hwirqs() may return signed, but hwirq is unsigned. A failed allocation remains unnoticed. Signed-off-by: NRoel Kluin <12o3l@tiscali.nl> Signed-off-by: NPaul Mackerras <paulus@samba.org>
-
- 13 5月, 2008 13 次提交
-
-
由 Becky Bruce 提交于
This driver has been superseded by fs_enet and is no longer in use. Signed-off-by: NBecky Bruce <becky.bruce@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Jeremy McNicoll 提交于
The following adds local bus, flash and MTD partition nodes for sbc8548. As well, a compatible field for the soc node, so that of_platform_bus_probe() will pick it up. Something that is provided through this newly added epld node is the Hardware Revision which is now being utilized. Signed-off-by: NJeremy McNicoll <jeremy.mcnicoll@windriver.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Andy Fleming 提交于
Signed-off-by: NAndy Fleming <afleming@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Zhang Wei 提交于
Signed-off-by: NZhang Wei <wei.zhang@freescale.com> Cc: "Nelson, Shannon" <shannon.nelson@intel.com> Cc: Dan Williams <dan.j.williams@intel.com> Signed-off-by: NAndrew Morton <akpm@linux-foundation.org> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Anton Vorontsov 提交于
DIU platform code should not just write to the PIXIS' BRDCFG0 register, it should set and clear its own bits only, otherwise it will break firmware setup (in fact it breaks second uart). Also get rid of magic numbers in the related code. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Anton Vorontsov 提交于
This patch adds device tree nodes for NOR and NAND flashes and places board-control node inside the localbus. defconfig and board file updated appropriately. Signed-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Andy Fleming 提交于
The 8568 MDS needs some configuration changes to the PHY in order to work properly. These are done in the firmware, normally, but Linux shouldn't need to rely on the firmware running such things (someone could disable the PHY support in the firmware to save space, for instance). Signed-off-by: NAndy Fleming <afleming@freescale.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Anton Vorontsov 提交于
As of current mainline tree, TULIP driver is unusable on MPC8610HPCD boards. There is a patch[1] floating around (and also included in the BSP), which tries to heal the situation, though the ethernet is still unusable. Practically it takes ages to mount NFS filesystem: VFS: Mounted root (nfs filesystem). Freeing unused kernel memory: 180k init nfs: server 10.0.0.2 not responding, still trying nfs: server 10.0.0.2 OK nfs: server 10.0.0.2 not responding, still trying nfs: server 10.0.0.2 not responding, still trying nfs: server 10.0.0.2 not responding, still trying nfs: server 10.0.0.2 not responding, still trying nfs: server 10.0.0.2 OK nfs: server 10.0.0.2 not responding, still trying So, instead of trying to add uli526x functionality into TULIP driver (which is already bloated enough), I fixed existing ULI526X driver and now it works perfectly well here. [1] http://www.bitshrine.org/gpp/0024-MPC8610-ETH-Lyra-native-ethernet.txtSigned-off-by: NAnton Vorontsov <avorontsov@ru.mvista.com> Signed-off-by: NKumar Gala <galak@kernel.crashing.org>
-
由 Linus Torvalds 提交于
Because it's not correct with a non-preemptable BKL and just causes PREEMPT kernels to have longer latencies than non-PREEMPT ones (which is obviously not the point of it at all). Of course, that config option actually got removed as an option earlier, so for now this basically disables it entirely, but if BKL preemption is ever resurrected it will be a meaningful optimization. And in the meantime, it at least documents the intent of the code, while not doing the wrong thing. Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/sfrench/cifs-2.6: [CIFS] don't allow demultiplex thread to exit until kthread_stop is called [CIFS] when not using unix extensions, check for and set ATTR_READONLY on create and mkdir [CIFS] add local struct inode pointer to cifs_setattr [CIFS] cifs_find_tcp_session cleanup
-
由 Linus Torvalds 提交于
We should not go through the task pointer to get at the thread info, since it's usually cheaper to just access the thread info directly. So don't make the code look up 'current', when we can just use the thread info accessor functions directly. This generally avoids one level of indirection and tends to work better together with code that also looks at other thread flags (eg preempt_count). Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
-
git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-inttypes由 Linus Torvalds 提交于
* git://git.kernel.org/pub/scm/linux/kernel/git/hpa/linux-2.6-inttypes: types: s390: fix #ifdef reversal in <asm-s390/types.h>
-
git://ftp.linux-mips.org/pub/scm/upstream-linus由 Linus Torvalds 提交于
* 'upstream' of git://ftp.linux-mips.org/pub/scm/upstream-linus: (28 commits) [MIPS] Pb1000: bury the remnants of the PCI code [MIPS] Fix build failure in mips oprofile code [MIPS] fix warning message on SMP kernels [MIPS] markeins: build fix [MIPS] ELF handling - use SELFMAG instead of numeric constant [MIPS] Get rid of __ilog2 [MIPS] Fix __fls for non-MIPS32/MIPS64 cpus [MIPS] XXS1500 code style cleanup [MIPS] MTX-1 code style cleanup [MIPS] Pb1200/DBAu1200 code style cleanup [MIPS] Pb1550 code style cleanup [MIPS] Pb1500 code style cleanup [MIPS] Pb1100 code style cleanup [MIPS] Pb1000 code style cleanup [MIPS] DBAu1xx0 code style cleanup [MIPS] Alchemy PCI code style cleanup [MIPS] Alchemy common code style cleanup [MIPS] Alchemy common headers style cleanup [MIPS] Add empty argument parenthesis to GCC_IMM_ASM [MIPS] msp_hwbutton.c: minor irq handler cleanups ...
-
- 12 5月, 2008 12 次提交
-
-
由 H. Peter Anvin 提交于
The #ifdef for the integer types was reversed; the standard pattern in these files are: #ifndef __s390x__ /* 32-bit code */ #else /* 64-bit code */ #endif Stick with the original pattern, but make sure the 32-bit code actually comes first! Reported by Al Viro. Signed-off-by: NH. Peter Anvin <hpa@zytor.com> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Al Viro <viro@zeniv.linux.org.uk>
-
由 Sergei Shtylyov 提交于
Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Thiemo Seufer 提交于
This patch fixes a warning-as-error induced build failure of 64bit MIPS kernels. Signed-off-by: NThiemo Seufer <ths@networkno.de> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Thiemo Seufer 提交于
This patch fixes a (harmless) warning message. Signed-off-by: NThiemo Seufer <ths@networkno.de> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Adrian Bunk 提交于
This patch fixes the following build errror caused by commit 7dffa3c6 (ntp: handle leap second via timer): <-- snip --> ... CC arch/mips/emma2rh/markeins/setup.o /home/bunk/linux/kernel-2.6/git/linux-2.6/arch/mips/emma2rh/markeins/setup.c:79: error: conflicting types for 'clock' /home/bunk/linux/kernel-2.6/git/linux-2.6/include/linux/clocksource.h:96: error: previous declaration of 'clock' was here make[2]: *** [arch/mips/emma2rh/markeins/setup.o] Error 1 <-- snip --> [Ralf: reformated to 80 colums after the fix and marked emma2rh_clock as __initdata] Signed-off-by: NAdrian Bunk <bunk@kernel.org> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Cyrill Gorcunov 提交于
Signed-off-by: NCyrill Gorcunov <gorcunov@gmail.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Ralf Baechle 提交于
56a6b1eb was a bit too conservative and left __ilog2 around which is only used as an internal function for other bitops. Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Thomas Bogendoerfer 提交于
Only MIPS32 and MIPS64 CPUs implement clz/dclz. Therefore don't export __ilog2() for non MIPS32/MIPS64 cpus and use generic __fls bitop code for these cpus. Signed-off-by: NThomas Bogendoerfer <tsbogend@alpha.franken.de> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Sergei Shtylyov 提交于
Fix several errors and warnings given by checkpatch.pl: - use of C99 // comments; - using simple_strtol() where strict_strtol() could be used. In addition to these changes, also do the following: - remove needless parentheses; - remove unneeded numeric literal type cast; - insert spaces between operator and its operands; - remove excess new lines; - remove space after the type cast's closing parenthesis; - insert missing space before closing brace in the structure initializer; - fix typos, capitalize acronyms, etc. in the comments; - update MontaVista copyright; - remove Pete Popov's old email address... Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Sergei Shtylyov 提交于
Fix many errors and warnings given by checkpatch.pl: - space after opening and before closing parentheses; - use of C99 // comments; - leading spaces instead of tabs; - brace not on the same line with 'else' in the 'if' statement; statement; - printk() without KERN_* facility level; - using simple_strtol() where strict_strtol() could be used. - including <asm/gpio.h> instead of <linux/gpio.h>. In addition to these changes, also do the following: - insert spaces between operator and its operands; - replace tab between the function type and name with space in mtx1_pci_idsel() declaration; - remove space after the type cast's closing parenthesis; - insert missing space before closing brace in the array/structure initializers; - update MontaVista copyright; - remove Pete Popov's old email address... Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Sergei Shtylyov 提交于
Fix several errors and warnings given by checkpatch.pl: - use of C99 // comments; - initialization of a 'static' variable to 0; - space after opening and before closing parentheses; - missing space between 'for' and opening parenthesis; - macros with complex values not enclosed in parentheses; - printk() without KERN_* facility level; - unnecessary braces for single-statement block; - using simple_strtol() where strict_strtol() could be used; - line over 80 characters. In addition to these changes, also do the following: - mention DBAu1200 board in the Makefile; - replace the group of #include/#ifdef directives by a single #include <au1xxx.h> since this header contains the needed stuff; - properly indent the blocks; - insert spaces between operator and its operands, remove excess spaces there; - remove needless parentheses and add some for clarity; - replace numeric literals/expressions with the matching macros; - remove space after the type cast's closing parenthesis; - reduce pb1200_setup_cascade() to the single 'return' statement; - reduce the number of printed empty lines in the so-called CPLD workaround; - remove #undef AU1X00_EXTERNAL_INT since that macro is not defined anywhere; - replace spaces after the macro name with tabs in the #define directives; - remove excess tabs after the macro name in the #define directives; - fix typo in the BCSR_RESETS_PWMR1mUX macro's name; - group all Pb1200 PCMCIA definitions together; - put the function's result type and name/parameters on the same line; - insert missing and remove excess new lines; - make the multi-line comment style consistent with the kernel style elsewhere by adding empty first line and/or adding space/asterisk on their left side; - fix typos/errors, capitalize acronyms, etc. in the comments; - combine some comments; - update MontaVista copyright; - remove Pete Popov's old email address... Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-
由 Sergei Shtylyov 提交于
Fix a few errors and warnings given by checkpatch.pl: - macros with complex values not enclosed in parentheses; - printk() without KERN_* facility level; - unnecessary braces for single-statement block; - using simple_strtol() where strict_strtol() could be used. In addition to these changes, also do the following: - replace numeric literals with the matching macros; - properly indent the code and the array initializers; - insert spaces between operator and its operands, also remove excess spaces there; - remove space after the type cast's closing parenthesis; - insert missing space before closing brace in the array initializers; - replace spaces after the macro name with tabs in the #define directives, also sometimes insert space there for better looks; - remove excess tabs after the macro name in the #define directives; - fix typos/errors, capitalize acronyms, etc. in the comments; - make the multi-line comment style consistent with the kernel style elsewhere by adding empty first line; - update MontaVista copyright; - remove Pete Popov's old email address... Signed-off-by: NSergei Shtylyov <sshtylyov@ru.mvista.com> Signed-off-by: NRalf Baechle <ralf@linux-mips.org>
-