Quote from Amit Salecha:

"Actually I was not updated, NX_UNIFIED_ROMIMAGE_NAME (phanfw.bin) is already
submitted and its present in linux-firmware.git.

I will get back to you on NX_P2_MN_ROMIMAGE_NAME, NX_P3_CT_ROMIMAGE_NAME and
NX_P3_MN_ROMIMAGE_NAME. Whether this will be submitted ?"

We have to remove these, otherwise we will get wrong info from modinfo.
Signed-off-by: NWANG Cong <amwang@redhat.com>
Cc: Amit Kumar Salecha <amit.salecha@qlogic.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Dhananjay Phadke <dhananjay.phadke@qlogic.com>
Cc: Narender Kumar <narender.kumar@qlogic.com>
Acked-by:  Amit Kumar Salecha <amit.salecha@qlogic.com>--
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Signed-off-by: NSjur Braendeland <sjur.brandeland@stericsson.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The SMSC911x supports 128 x 8-bit EEPROMs.  Increase the EEPROM size
so more than just the MAC address can be stored.
Signed-off-by: NJohn Faith <jfaith7@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Stopping TX queues at driver load time is not necessary.
Signed-off-by: NCasey Leedom <leedom@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove racy queue stopping after device registration.
Signed-off-by: NDimitris Michailidis <dm@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Remove racy queue stopping after device registration.
Signed-off-by: NDivy Le Ray <divy@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Touching the queue state before register_netdev is not
allowed, and besides the queue state before ->open()
is "don't care"
Reported-by: NJosh Boyer <jwboyer@gmail.com>
Reported-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since usbnet already took usb runtime pm, we have to
enable runtime pm for usb interface of usbnet, otherwise
usb_autopm_get_interface may return failure and cause
'ifconfig usb0 up' failed if USB_SUSPEND(RUNTIME_PM) is
enabled.

Cc: David Brownell <dbrownell@users.sourceforge.net>
Cc: Greg Kroah-Hartman <gregkh@suse.de>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Ben Hutchings <ben@decadent.org.uk>
Cc: Joe Perches <joe@perches.com>
Cc: Oliver Neukum <oliver@neukum.org>
Cc: Andy Shevchenko <andy.shevchenko@gmail.com>
Cc: stable@kernel.org
Signed-off-by: NMing Lei <tom.leiming@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Update bnx2x version number.
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Resetting 8073 during common init is required on boards in which the
8073 reset pin is not asserted by default.
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Enabling CL37 BAM on BCM8073 by default may lead to link issues since
not all switches support it. So enable CL37 BAM only if explicitly
selected.
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On BCM8726 based designs, the ports are swapped, hence the reset needs
to be asserted through port0 and not port1.
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

When using latch indication for link change notification, need to
clear it when port is unloaded, otherwise it might generate false
indication on next load.
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On E2 flavor, dual-port mode, the port argument used for some
functions is needed as the global port number rather than the port per
path.
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

BCM848x3 requires additional of 50ms after reset done indication,
instead of fixed time of 200ms
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Fix delay during BMAC reset from 10usec to 1ms.
Signed-off-by: NYaniv Rosner <yanivr@broadcom.com>
Signed-off-by: NEilon Greenstein <eilong@broadcom.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Its now illegal to call netif_stop_queue() before register_netdev()
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Cc: Amit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Its now illegal to call netif_stop_queue() before register_netdev()
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Cc: Guo-Fu Tseng <cooldavid@cooldavid.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

My old mail address doesn't exist anymore. This changes all occurrences
to my new address.
Signed-off-by: NHans J. Koch <hjk@hansjkoch.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

pcnet_cs:
    add new_id: "corega Ether CF-TD" 10Base-T PCMCIA card.
Signed-off-by: NKen Kawasaki <ken_kawasaki@spring.nifty.jp>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes the following section mismatch warning:

WARNING: drivers/net/can/pch_can.o(.data+0x18):
Section mismatch in reference from the variable pch_can_pcidev
to the variable .devinit.rodata:pch_pci_tbl
The variable pch_can_pcidev references
the variable __devinitconst pch_pci_tbl

This is actually a false positive which is fixed by giving the offending
variable a whitelisted name, it's renamed to "pch_can_pci_driver".
This makes sense because the variable is of the type "struct pci_driver".
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
Acked-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch fixes the following sparse warning:

drivers/net/can/pch_can.c:231:26: warning: incorrect type in argument 1 (different address spaces)
drivers/net/can/pch_can.c:231:26:    expected unsigned int [usertype] *addr
drivers/net/can/pch_can.c:231:26:    got unsigned int [noderef] <asn:2>*<noident>

Let pch_can_bit_{set,clear} first parameter be a void __iomem pointer.
Signed-off-by: NMarc Kleine-Budde <mkl@pengutronix.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

We should not stop the egress queue during probe because it is wrong.
Signed-off-by: NDenis Kirjanov <dkirjanov@kernel.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Noticed by sparse:
drivers/net/vmxnet3/vmxnet3_drv.c:876:38: warning: cast from restricted __be16
drivers/net/vmxnet3/vmxnet3_drv.c:876:38: warning: cast from restricted __be16
drivers/net/vmxnet3/vmxnet3_drv.c:876:24: warning: restricted __be16 degrades to integer
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

readl/writel swap to little-endian internally.
Signed-off-by: NHarvey Harrison <harvey.harrison@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The marvell 88ec048's official part number is 88e1318s.  This patch renames
definitions in the driver to reflect this.

In addition, a minor bug fix has been added to write back the MSCR1 register
value properly.
Signed-off-by: NCyril Chemparathy <cyril@ti.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

On module removal, the sdio version of b43 generates the following warning:

[  851.560519] ------------[ cut here ]------------
[  851.560531] WARNING: at drivers/mmc/core/core.c:237 mmc_wait_for_cmd+0x88/0x90()
[  851.560534] Hardware name: 20552PG
[  851.560536] Modules linked in: b43(-) ssb mmc_block binfmt_misc rfcomm sco bnep ppdev l2cap ipt_MASQUERADE iptable_nat nf_nat nf_conntrack_ipv4 nf_defrag_ipv4 xt_state nf_conntrack ipt_REJECT xt_tcpudp iptable_filter ip_tables x_tables bridge stp kvm_intel kvm arc4 iwlagn snd_hda_codec_conexant snd_hda_intel snd_hda_codec iwlcore snd_hwdep snd_pcm thinkpad_acpi mac80211 snd_seq_midi snd_rawmidi snd_seq_midi_event snd_seq r852 joydev snd_timer sm_common pcmcia nand snd_seq_device cfg80211 sdhci_pci btusb psmouse tpm_tis yenta_socket nand_ids lp snd pcmcia_rsrc nand_ecc bluetooth sdhci tpm pcmcia_core parport mtd snd_page_alloc serio_raw tpm_bios soundcore nvram led_class sha256_generic aes_i586 aes_generic dm_crypt i915 drm_kms_helper drm ahci intel_agp i2c_algo_bit intel_gtt e1000e libahci video agpgart output
[  851.560620] Pid: 2504, comm: rmmod Not tainted 2.6.36-titan0+ #1
[  851.560622] Call Trace:
[  851.560631]  [<c014a102>] warn_slowpath_common+0x72/0xa0
[  851.560636]  [<c04d94c8>] ? mmc_wait_for_cmd+0x88/0x90
[  851.560641]  [<c04d94c8>] ? mmc_wait_for_cmd+0x88/0x90
[  851.560645]  [<c014a152>] warn_slowpath_null+0x22/0x30
[  851.560649]  [<c04d94c8>] mmc_wait_for_cmd+0x88/0x90
[  851.560655]  [<c0401585>] ? device_release+0x25/0x80
[  851.560660]  [<c04df210>] mmc_io_rw_direct_host+0xa0/0x150
[  851.560665]  [<c04df370>] mmc_io_rw_direct+0x30/0x40
[  851.560669]  [<c04e06e7>] sdio_disable_func+0x37/0xa0
[  851.560683]  [<f8dfcb80>] b43_sdio_remove+0x30/0x50 [b43]
[  851.560687]  [<c04df8cc>] sdio_bus_remove+0x1c/0x60
[  851.560692]  [<c016d39f>] ? blocking_notifier_call_chain+0x1f/0x30
[  851.560697]  [<c0404991>] __device_release_driver+0x51/0xb0
[  851.560701]  [<c0404a7f>] driver_detach+0x8f/0xa0
[  851.560705]  [<c0403c83>] bus_remove_driver+0x63/0xa0
[  851.560709]  [<c0405039>] driver_unregister+0x49/0x80
[  851.560713]  [<c0405039>] ? driver_unregister+0x49/0x80
[  851.560718]  [<c04dfad7>] sdio_unregister_driver+0x17/0x20
[  851.560727]  [<f8dfcb42>] b43_sdio_exit+0x12/0x20 [b43]
[  851.560734]  [<f8dfe76f>] b43_exit+0x17/0x3c [b43]
[  851.560740]  [<c017fb8d>] sys_delete_module+0x13d/0x200
[  851.560747]  [<c01fd7d2>] ? do_munmap+0x212/0x300
[  851.560752]  [<c010311f>] sysenter_do_call+0x12/0x28
[  851.560757] ---[ end trace 31e14488072d2f7d ]---
[  851.560759] ------------[ cut here ]------------

The warning is caused by b43 not claiming the device before calling
sdio_disable_func().
Signed-off-by: NLarry Finger <Larry.Finger@lwfinger.net>
Reported-by: NArnd Hannemann <arnd@arndnet.de>
Tested-by: NArnd Hannemann <arnd@arndnet.de>
Cc: Stable <stable@kernel.org>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

For the SD8686, we cannot rely on the scratch register to read the firmware
load status, because the same register is used for storing RX packet length.
Broaden the check to account for this.

The module can now be unloaded/reloaded successfully.

Based on the implementation from libertas_tf.
Signed-off-by: NDaniel Drake <dsd@laptop.org>
Acked-by: NDan Williams <dcbw@redhat.com>
Signed-off-by: NSteve deRosier <steve@cozybit.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

The index variable to access the rate flags should be obtained from the
inner loop counter which corresponds to the rate table structure.This
fixes the invalid rate selection i.e when the supported basic rate is
invalid on a particular band and also the following warning message.
Thanks to Raj for finding this out.

Call Trace:

 [<ffffffff8104ee4a>] warn_slowpath_common+0x7a/0xb0

 [<ffffffff8104ee95>] warn_slowpath_null+0x15/0x20

 [<ffffffffa0583c45>] ath_get_rate+0x595/0x5b0 [ath9k]

 [<ffffffff811a0636>] ? cpumask_next_and+0x36/0x50

 [<ffffffffa0405186>] rate_control_get_rate+0x86/0x160 [mac80211]

 [<ffffffffa040dfac>] invoke_tx_handlers+0x81c/0x12d0 [mac80211]

 [<ffffffffa040eae9>] ieee80211_tx+0x89/0x2b0 [mac80211]

 [<ffffffff812891bc>] ? pskb_expand_head+0x1cc/0x1f0

 [<ffffffffa040edc5>] ieee80211_xmit+0xb5/0x1c0 [mac80211]

 [<ffffffffa041026f>] ieee80211_tx_skb+0x4f/0x60 [mac80211]

 [<ffffffffa03fe016>] ieee80211_send_nullfunc+0x46/0x60 [mac80211]

 [<ffffffffa03f91d7>] ieee80211_offchannel_stop_station+0x107/0x150
[mac80211]

 [<ffffffff812891bc>] ? pskb_expand_head+0x1cc/0x1f0

 [<ffffffffa040edc5>] ieee80211_xmit+0xb5/0x1c0 [mac80211]

 [<ffffffffa041026f>] ieee80211_tx_skb+0x4f/0x60 [mac80211]

 [<ffffffffa03fe016>] ieee80211_send_nullfunc+0x46/0x60 [mac80211]

 [<ffffffffa03f91d7>] ieee80211_offchannel_stop_station+0x107/0x150
[mac80211]

 [<ffffffffa03f8896>] ieee80211_scan_work+0x146/0x600 [mac80211]

 [<ffffffff8133a375>] ? schedule+0x2f5/0x8e0

 [<ffffffffa03f8750>] ? ieee80211_scan_work+0x0/0x600 [mac80211]

 [<ffffffff81064fcf>] process_one_work+0x10f/0x380

 [<ffffffff81066bc2>] worker_thread+0x162/0x340

 [<ffffffff81066a60>] ? worker_thread+0x0/0x340

Cc: stable@kernel.org
Signed-off-by: NMohammed Shafi Shajakhan <mshajakhan@atheros.com>
Signed-off-by: NJohn W. Linville <linville@tuxdriver.com>

This patch enables and disables the rx and tx bits in the MAC control reg
by using a single write operation.
This also solves a possible problem (spotted on SPEAr platforms) at 10Mbps
where two consecutive writes to a MAC control register can take more than
4 phy_clk cycles.
Signed-off-by: NArmando Visconti <armando.visconti@st.com>
Acked-by: NGiuseppe Cavallaro <peppe.cavallaro@st.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

drivers/net/atarilance.c: In function ‘addr_accessible’:
drivers/net/atarilance.c:413: warning: comparison of distinct pointer types lacks a cast
drivers/net/atarilance.c:450: warning: comparison of distinct pointer types lacks a cast
Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Reset the whole hw instead of freeing hw resources
consumed by each pci function.
Signed-off-by: NRajesh Borundia <rajesh.borundia@qlogic.com>
Signed-off-by: NAmit Kumar Salecha <amit.salecha@qlogic.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

I got a few of these panics (on 2.6.36-rc7) when running high
number of netperf sessions:

BUG: unable to handle kernel paging request at 0000100000000000
IP: [<ffffffff813125f0>] skb_release_data+0xa0/0xd0
Oops: 0000 [#1] SMP
Pid: 2155, comm: vhost-2115 Not tainted 2.6.36-rc7-ORG #1 49Y6512     /System x3650 M2 -[7947AC1]-
RIP: 0010:[<ffffffff813125f0>]  [<ffffffff813125f0>] skb_release_data+0xa0/0xd0
RSP: 0018:ffff880001803738  EFLAGS: 00010206
RAX: ffff880179b0fc00 RBX: ffff880178b441c0 RCX: 0000000000000000
RSP: 0018:ffff880001803738  EFLAGS: 00010206
RAX: ffff880179b0fc00 RBX: ffff880178b441c0 RCX: 0000000000000000
RDX: ffff880179b0fd40 RSI: 0000000000000000 RDI: 0000100000000000
RBP: ffff880001803748 R08: 0000000000000001 R09: ffff88017f117000
R10: ffff88017b990608 R11: ffff88017f117090 R12: ffff880178b441c0
R13: ffff88017f117090 R14: 0000000000000000 R15: ffff880178b441c0
FS:  0000000000000000(0000) GS:ffff880001800000(0000) knlGS:0000000000000000
CS:  0010 DS: 0000 ES: 0000 CR0: 000000008005003b
CR2: 0000100000000000 CR3: 000000017ea64000 CR4: 00000000000026e0
DR0: 0000000000000000 DR1: 0000000000000000 DR2: 0000000000000000
DR3: 0000000000000000 DR6: 00000000ffff0ff0 DR7: 0000000000000400
Process vhost-2115 (pid: 2155, threadinfo ffff88017d872000, task ffff88017e954680)
Stack:
ffff880178b441c0 0000000000000007 ffff880001803768 ffffffff81312119
<0> 0000000000000000 0000000000000002 ffff880001803778 ffffffff813121f9
<0> ffff880001803818 ffffffffa012d14c ffffffffa02de076 ffff880001803700
Call Trace:
<IRQ>
[<ffffffff81312119>] __kfree_skb+0x19/0xa0
[<ffffffff813121f9>] kfree_skb+0x19/0x40
[<ffffffffa012d14c>] free_tx_desc+0x2fc/0x350 [cxgb3]
[<ffffffffa02de076>] ? vhost_poll_wakeup+0x16/0x20 [vhost_net]
[<ffffffffa01323db>] t3_eth_xmit+0x28b/0x380 [cxgb3]
[<ffffffff8131ce47>] dev_hard_start_xmit+0x377/0x5a0
[<ffffffff81335a4a>] sch_direct_xmit+0xfa/0x1d0
[<ffffffff8131d1a9>] dev_queue_xmit+0x139/0x450
[<ffffffff81326225>] neigh_resolve_output+0x125/0x340
[<ffffffff8135a77c>] ip_finish_output+0x14c/0x320
[<ffffffff8135a9fe>] ip_output+0xae/0xc0
[<ffffffff8135620f>] ip_forward_finish+0x3f/0x50
[<ffffffff8135641f>] ip_forward+0x1ff/0x400
[<ffffffff81354789>] ip_rcv_finish+0x119/0x3e0
[<ffffffff81354c7d>] ip_rcv+0x22d/0x300
[<ffffffff8131a95b>] __netif_receive_skb+0x29b/0x570
[<ffffffff8131ba70>] ? netif_receive_skb+0x0/0x80
[<ffffffff8131bae8>] netif_receive_skb+0x78/0x80
[<ffffffffa02a96d8>] br_handle_frame_finish+0x198/0x260 [bridge]
[<ffffffffa02aebc8>] br_nf_pre_routing_finish+0x238/0x380 [bridge]
[<ffffffff813424bc>] ? nf_hook_slow+0x6c/0x100
[<ffffffffa02ae990>] ? br_nf_pre_routing_finish+0x0/0x380 [bridge]
[<ffffffffa02afb08>] br_nf_pre_routing+0x698/0x7a0 [bridge]
[<ffffffff81342414>] nf_iterate+0x64/0xa0
[<ffffffffa02a9540>] ? br_handle_frame_finish+0x0/0x260 [bridge]
[<ffffffff813424bc>] nf_hook_slow+0x6c/0x100
[<ffffffffa02a9540>] ? br_handle_frame_finish+0x0/0x260 [bridge]
[<ffffffffa02a9931>] br_handle_frame+0x191/0x240 [bridge]
[<ffffffffa02a97a0>] ? br_handle_frame+0x0/0x240 [bridge]
[<ffffffff8131a863>] __netif_receive_skb+0x1a3/0x570
[<ffffffff812ef3f6>] ? dma_issue_pending_all+0x76/0xa0
[<ffffffff8131ad32>] process_backlog+0x102/0x200
[<ffffffff8131c2d0>] net_rx_action+0x100/0x220
[<ffffffff810548ef>] __do_softirq+0xaf/0x140
[<ffffffff8100bcdc>] call_softirq+0x1c/0x30
[<ffffffff8100dfc5>] ? do_softirq+0x65/0xa0
[<ffffffff8131c6b8>] netif_rx_ni+0x28/0x30
[<ffffffffa02c305d>] tun_sendmsg+0x2cd/0x4b0 [tun]
[<ffffffffa02e01af>] handle_tx+0x1df/0x340 [vhost_net]
[<ffffffffa02e0340>] handle_tx_kick+0x10/0x20 [vhost_net]
[<ffffffffa02de29b>] vhost_worker+0xbb/0x130 [vhost_net]
[<ffffffffa02de1e0>] ? vhost_worker+0x0/0x130 [vhost_net]
[<ffffffffa02de1e0>] ? vhost_worker+0x0/0x130 [vhost_net]
[<ffffffff81069686>] kthread+0x96/0xa0
[<ffffffff8100bbe4>] kernel_thread_helper+0x4/0x10
[<ffffffff810695f0>] ? kthread+0x0/0xa0
[<ffffffff8100bbe0>] ? kernel_thread_helper+0x0/0x10
Code: 8b 94 24 d0 00 00 00 49 8b 84 24 d8 00 00 00 48 8d 14 10 0f b7 0a 39 d9 7f d1 48 8b 7a 10 48 85 ff 74 20 48 c7 42 10 00 00 00 00 <48> 8b 1f e8 e8 fb ff ff 48 85 db 48 89 df 75 f0 49 8b 84 24 d8

Patch below fixes the panic. cxgb4 and cxgb4vf already have this fix.
Signed-off-by: NKrishna Kumar <krkumar2@in.ibm.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Along the same lines as "cxgb4: fix crash due to manipulating queues
before registration" (8f6d9f40), before
commit "net: allocate tx queues in register_netdevice"
netif_tx_stop_all_queues and related functions could be used between
device allocation and registration but now only after registration.
cxgb4 has such a call before registration and crashes now.  Move it
after register_netdev.
Signed-off-by: NNishanth Aravamudan <nacc@us.ibm.com>
Cc: eric.dumazet@gmail.com
Cc: sonnyrao@us.ibm.com
Cc: Divy Le Ray <divy@chelsio.com>
Cc: Dimitris Michailidis <dm@chelsio.com>
Cc: netdev@vger.kernel.org
Cc: linux-kernel@vger.kernel.org
Tested-by: NNishanth Aravamudan <nacc@us.ibm.com>
Acked-by: NDivy Le Ray <divy@chelsio.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The __NS8390_init tries to start the device queue before the
device is registered. This results in an oops (snipped):

[    2.865493] BUG: unable to handle kernel NULL pointer dereference at 0000000000000010
[    2.866106] IP: [<ffffffffa000602a>] netif_start_queue+0xb/0x12 [8390]
[    2.881267] Call Trace:
[    2.881437]  [<ffffffffa000624d>] __NS8390_init+0x102/0x15a [8390]
[    2.881999]  [<ffffffffa00062ae>] NS8390_init+0x9/0xb [8390]
[    2.882237]  [<ffffffffa000d820>] ne2k_pci_init_one+0x297/0x354 [ne2k_pci]
[    2.882955]  [<ffffffff811c7a0e>] local_pci_probe+0x12/0x16
[    2.883308]  [<ffffffff811c85ad>] pci_device_probe+0xc3/0xef
[    2.884049]  [<ffffffff8129218d>] driver_probe_device+0xbe/0x14b
[    2.884937]  [<ffffffff81292260>] __driver_attach+0x46/0x62
[    2.885170]  [<ffffffff81291788>] bus_for_each_dev+0x49/0x78
[    2.885781]  [<ffffffff81291fbb>] driver_attach+0x1c/0x1e
[    2.886089]  [<ffffffff812912ab>] bus_add_driver+0xba/0x227
[    2.886330]  [<ffffffff8129259a>] driver_register+0x9e/0x115
[    2.886933]  [<ffffffff811c8815>] __pci_register_driver+0x50/0xac
[    2.887785]  [<ffffffffa001102c>] ne2k_pci_init+0x2c/0x2e [ne2k_pci]
[    2.888093]  [<ffffffff81000212>] do_one_initcall+0x7c/0x130
[    2.888693]  [<ffffffff8106d74f>] sys_init_module+0x99/0x1da
[    2.888946]  [<ffffffff81002a2b>] system_call_fastpath+0x16/0x1b

This happens because the netif_start_queue sets respective bit on the dev->_tx
array which is not yet allocated.

As far as I understand the code removing the netif_start_queue from __NS8390_init
is OK, since queue will be started later on device open. Plz, correct me if I'm wrong.

Found in the Dave's current tree, so he's in Cc.
Signed-off-by: NPavel Emelyanov <xemul@openvz.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Introduced by commit:e6484930
net: allocate tx queues in register_netdevice
Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com>
Acked-by: NGreg Rose <greg.v.rose@intel.com>
Tested-by: NJeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ixgb fails to work after reload on recent kernels:

rmmod ixgb (dev->current_state = PCI_UNKNOWN)
modprobe ixgb (pci_enable_device will bail leaving current_state to PCI_UNKNOWN)
ifup eth0
do_IRQ: 2.82 No irq handler for vector (irq -1)

The issue was exposed by commit fcd097f3
PCI: MSI: Remove unsafe and unnecessary hardware access

which avoids HW writes for power states != PCI_D0

CC: Ben Hutchings <bhutchings@solarflare.com>
Signed-off-by: NEmil Tantilov <emil.s.tantilov@intel.com>
Tested-by: NJeff Pieper <jeffrey.e.pieper@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The DCB credits refill quantum _must_ be greater than half the max
packet size. This is needed to guarantee that TX DMA operations
are not attempted during a pause state. Additionally, the min IFG
must be set correctly for DCB mode. If a DMA operation is
requested unexpectedly during the pause state the HW data
store may be corrupted leading to a DMA hang.  The DMA hang
requires a reset to correct. This fixes the HW configuration
to avoid this condition.
Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com>
Tested-by: NRoss Brattain <ross.b.brattain@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some parts need to execute resets during normal operation.  This flag
check ensures that those parts reset without needlessly alarming the
user.  Other unexpected resets by other parts will dump debug info
and message the reset action to the user, as originally intended.
Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com>
Acked-by: NBruce Allan <bruce.w.allan@intel.com>
Tested-by: NEmil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some errors can be induced in the PHY via environmental testing
(specifically extreme temperature changes and electro static
discharge testing), and in the case of the PHY hanging due to
this input, this detects the problem and resets to continue.
This issue only applies to 82574 silicon.
Signed-off-by: NJesse Brandeburg <jesse.brandeburg@intel.com>
Signed-off-by: NCarolyn Wyborny <carolyn.wyborny@intel.com>
Tested-by: NEmil Tantilov <emil.s.tantilov@intel.com>
Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>