Daniel Vetter pointed out that in this case is would be clearer and
cleaner to use a spinlock instead of a mutex to protect the per-file
request list manipulation. Make it so.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

It's the same code, essentially, so kill all copies safe one unified
version.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

All functions are extremely similar, so fold them into one generic
implementation.

This function isn't used anyway, because there's not yet a bsd ring
error state dumper.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Two macros that use a base address for HWS_PGA were missing, add them.
Also switch the remaining users of *_ACTHD to the ring-base one.
Kill the other ring-specific macros because they're now unused.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
[ickle: And silence checkpatch whilst in the vicinity]
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

This was mixed up in the following patch:

commit a6c45cf0
Author: Chris Wilson <chris@chris-wilson.co.uk>
Date:   Fri Sep 17 00:32:17 2010 +0100

    drm/i915: INTEL_INFO->gen supercedes i8xx, i9xx, i965g
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Everything is now handled in intel-gtt.h so these defines
are only confusing.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

... and combine it with the wedged completion handler.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Owain Ainsworth reported an issue between the interaction of the
hangcheck and userspace immediately (and permanently) falling back to
s/w rasterisation. In order to break the mutex and begin resetting the
GPU, we must abort the current operation (usually within the wait) and
climb sufficiently far back up the call chain to drop the mutex. In his
implementation, Owain has a loop within the ioctl handler to detect the
hang and then sleep until the error handler has run. I've chosen to
return to userspace and report an EAGAIN which should trigger the
userspace ioctl handler to repeat the call (simply because it felt less
invasive...). Before hitting a wedged GPU, we then wait upon completion
of the error handler.
Reported-by: NOwain G. Ainsworth <zerooa@googlemail.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Avoid cause latencies in other clients by not taking the global struct
mutex and moving the per-client request manipulation a local per-client
mutex. For example, this allows a compositor to schedule a page-flip
(through X) whilst an OpenGL application is monopolising the GPU.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

This patch fixes the black screen bug on Dell e6510, by
adding two delays to give the eDP panel time to turn on before we
continue with the next write.

300ms is rather arbitray and a rather long sleep, we need to find a way
of refining this value.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29278Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>
Acked-by: NJesse Barnes <jbarnes@virtuousgeek.org>

In commit e517a5e9 the call to
map_page_into_agp() got removed from intel_i830_setup_flush(), but the
counterpart call from intel_i830_fini_flush() to unmap_page_from_agp()
was left in place.

Additionally, the page allocated here never gets its physical address
used for sending to hardware, so there's no need to allocate it with
GFP_DMA32. Nor is __GFP_ZERO really necessary, as the page is used
only to store data to force flushing of some internal processor state.
Signed-off-by: NJan Beulich <jbeulich@novell.com>
Cc: Eric Anholt <eric@anholt.net>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

First step, lets have a look at the values for troublesome panels and
see if they may be used to improve our link training.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

We need to drain the pending flips prior to disabling the pipe during
modeset, and these need to be done in an uninterruptible fashion.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

This is now private to the DVO connector, remove it from the main device
private.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

As we presume space is signed when computing and looking for wrap along,
make it so.
Reported-by: NOwain G. Ainsworth <zerooa@googlemail.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

These have served their purpose and are now just noise in the debug
stream.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Try to validate the panel's connection by writing to address 0xA0.

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=18072Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

We need to wait for the PLLs to settle prior to detecting the state
changes. The BIOS writers guide suggests waiting for the next vblank.
Reported-by: NCarlos R. Mafra <crmafra2@gmail.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

This is already performed with the pipelined flush, so by the time we
schedule the flush in the page-flip, the ring is NULL and we OOPs
instead.
Reported-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

The BIOS writer's guide suggests that a VGA connection will ACK a write
to address 0xA0 and that this should be used before doing legacy
load-detection. Considering the extreme cost of load-detection,
performing an extra DDC seems a risk worth taking.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

We are not currently using it as intended, so remove the complication.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Previously when converting the GMBUS pin to the GPIO reg, we would
offset the pin by one and then use the look-up table. Now that we first
try to use the GMBUS pin, we no longer need the offset and can use the
value from the VBIOS directly.
Reported-by: NCarlos R. Mafra <crmafra2@gmail.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Otherwise we will hit a list handling assertion when moving the object
to the inactive list.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

During i915_gem_create_mmap_offset() if the subsystem reports an error
code, use it.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

As we do not wait for the panel to turn off when we need to adjust the
panel-fitting registers we also need to unlock the PLLs as with the
non-pfit update path.
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

In order to handle disable_functions() where the framebuffer is
decoupled from the crtc we need to unpin the fb in order to prevent a
leak.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=29857Reported-by: NSitsofe Wheeler <sitsofe@yahoo.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Suspending (especially hibernating) may take a finite amount of time,
during which a hotplug event may trigger and we will attempt to handle
it with inconsistent state. Disable hotplug polling around suspend and
resume.

Bugzilla: https://bugs.freedesktop.org/show_bug.cgi?id=30070Reported-by: NRui Tiago Matos <tiagomatos@gmail.com>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

The old code didn't clean up the i830 chipset flush page. And it
looks nicer.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Storing this explicitly makes for clearer code and hopefully
less further confusion.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Consolidate everything in intel-gtt.c and also kill the export
of intel_max_stolen.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

DMA remapping was only used by the intel-gtt driver. With that
code now folded into the driver, kill the agp generic support for
it.

Cc: Dave Airlie <airlied@linux.ie>
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

They're now all the same.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

This is the last differentiator between the different fake agp drivers.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

That indirection mess can now go. Add a dummy i81x gtt_driver to
avoid a NULL pointer check.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Like before, but now with the added bonus of being able to kill
quite a bit of no-longer userful code (the old dmar support stuff).
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Like for the i915.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>

Beef up the generic version to support dmar. Otherwise like for the i830.

v2: Don't try to DMA remap on resume for already remapped pages.
Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch>
Signed-off-by: NChris Wilson <chris@chris-wilson.co.uk>