- 15 2月, 2014 1 次提交
-
-
由 WANG Cong 提交于
There are many drivers calling alloc_percpu() to allocate pcpu stats and then initializing ->syncp. So just introduce a helper function for them. Cc: David S. Miller <davem@davemloft.net> Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 23 1月, 2014 1 次提交
-
-
由 Jiri Pirko 提交于
No longer used API bond-specific can be removed now. This is now handled in a generic way in rtnl_link_ops. Signed-off-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 22 1月, 2014 1 次提交
-
-
由 Or Gerlitz 提交于
Add GRO handlers for protocols that do UDP encapsulation, with the intent of being able to coalesce packets which encapsulate packets belonging to the same TCP session. For GRO purposes, the destination UDP port takes the role of the ether type field in the ethernet header or the next protocol in the IP header. The UDP GRO handler will only attempt to coalesce packets whose destination port is registered to have gro handler. Use a mark on the skb GRO CB data to disallow (flush) running the udp gro receive code twice on a packet. This solves the problem of udp encapsulated packets whose inner VM packet is udp and happen to carry a port which has registered offloads. Signed-off-by: NShlomo Pongratz <shlomop@mellanox.com> Signed-off-by: NOr Gerlitz <ogerlitz@mellanox.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 1月, 2014 1 次提交
-
-
If link is IFF_SLAVE, extend link dev netlink attributes to include slave attributes with new IFLA_SLAVE nest. Add netlink notification (RTM_NEWLINK) when slave status changes from backup to active, or visa-versa. Adds new ndo_get_slave op to net_device_ops to fill skb with IFLA_SLAVE attributes. Currently only used by bonding driver, but could be used by other aggregating devices with slaves. Signed-off-by: NScott Feldman <sfeldma@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 17 1月, 2014 2 次提交
-
-
由 Michael Dalton 提交于
Extend existing support for netdevice receive queue sysfs attributes to permit a device-specific attribute group. Initial use case for this support will be to allow the virtio-net device to export per-receive queue mergeable receive buffer size. Signed-off-by: NMichael Dalton <mwdalton@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Veaceslav Falico 提交于
Currently, if a device changes its mtu, first the change happens (invloving all the side effects), and after that the NETDEV_CHANGEMTU is sent so that other devices can catch up with the new mtu. However, if they return NOTIFY_BAD, then the change is reverted and error returned. This is a really long and costy operation (sometimes). To fix this, add NETDEV_PRECHANGEMTU notification which is called prior to any change actually happening, and if any callee returns NOTIFY_BAD - the change is aborted. This way we're skipping all the playing with apply/revert the mtu. CC: "David S. Miller" <davem@davemloft.net> CC: Jiri Pirko <jiri@resnulli.us> CC: Eric Dumazet <edumazet@google.com> CC: Nicolas Dichtel <nicolas.dichtel@6wind.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: NVeaceslav Falico <vfalico@redhat.com> Acked-by: NJiri Pirko <jiri@resnulli.us> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 1月, 2014 1 次提交
-
-
由 Veaceslav Falico 提交于
Currently, we don't rename the upper/lower_ifc symlinks in /sys/class/net/*/ , which might result stale/duplicate links/names. Fix this by adding netdev_adjacent_rename_links(dev, oldname) which renames all the upper/lower interface's links to dev from the upper/lower_oldname to the new name. We don't need a rollback because only we control these symlinks and if we fail to rename them - sysfs will anyway complain. Reported-by: NDing Tianhong <dingtianhong@huawei.com> CC: Ding Tianhong <dingtianhong@huawei.com> CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Nicolas Dichtel <nicolas.dichtel@6wind.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: NVeaceslav Falico <vfalico@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 1月, 2014 1 次提交
-
-
由 Jason Wang 提交于
Currently, the tx queue were selected implicitly in ndo_dfwd_start_xmit(). The will cause several issues: - NETIF_F_LLTX were removed for macvlan, so txq lock were done for macvlan instead of lower device which misses the necessary txq synchronization for lower device such as txq stopping or frozen required by dev watchdog or control path. - dev_hard_start_xmit() was called with NULL txq which bypasses the net device watchdog. - dev_hard_start_xmit() does not check txq everywhere which will lead a crash when tso is disabled for lower device. Fix this by explicitly introducing a new param for .ndo_select_queue() for just selecting queues in the case of l2 forwarding offload. netdev_pick_tx() was also extended to accept this parameter and dev_queue_xmit_accel() was used to do l2 forwarding transmission. With this fixes, NETIF_F_LLTX could be preserved for macvlan and there's no need to check txq against NULL in dev_hard_start_xmit(). Also there's no need to keep a dedicated ndo_dfwd_start_xmit() and we can just reuse the code of dev_queue_xmit() to do the transmission. In the future, it was also required for macvtap l2 forwarding support since it provides a necessary synchronization method. Cc: John Fastabend <john.r.fastabend@intel.com> Cc: Neil Horman <nhorman@tuxdriver.com> Cc: e1000-devel@lists.sourceforge.net Signed-off-by: NJason Wang <jasowang@redhat.com> Acked-by: NNeil Horman <nhorman@tuxdriver.com> Acked-by: NJohn Fastabend <john.r.fastabend@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 1月, 2014 1 次提交
-
-
由 Jerry Chu 提交于
This patch built on top of Commit 299603e8 ("net-gro: Prepare GRO stack for the upcoming tunneling support") to add the support of the standard GRE (RFC1701/RFC2784/RFC2890) to the GRO stack. It also serves as an example for supporting other encapsulation protocols in the GRO stack in the future. The patch supports version 0 and all the flags (key, csum, seq#) but will flush any pkt with the S (seq#) flag. This is because the S flag is not support by GSO, and a GRO pkt may end up in the forwarding path, thus requiring GSO support to break it up correctly. Currently the "packet_offload" structure only contains L3 (ETH_P_IP/ ETH_P_IPV6) GRO offload support so the encapped pkts are limited to IP pkts (i.e., w/o L2 hdr). But support for other protocol type can be easily added, so is the support for GRE variations like NVGRE. The patch also support csum offload. Specifically if the csum flag is on and the h/w is capable of checksumming the payload (CHECKSUM_COMPLETE), the code will take advantage of the csum computed by the h/w when validating the GRE csum. Note that commit 60769a5d "ipv4: gre: add GRO capability" already introduces GRO capability to IPv4 GRE tunnels, using the gro_cells infrastructure. But GRO is done after GRE hdr has been removed (i.e., decapped). The following patch applies GRO when pkts first come in (before hitting the GRE tunnel code). There is some performance advantage for applying GRO as early as possible. Also this approach is transparent to other subsystem like Open vSwitch where GRE decap is handled outside of the IP stack hence making it harder for the gro_cells stuff to apply. On the other hand, some NICs are still not capable of hashing on the inner hdr of a GRE pkt (RSS). In that case the GRO processing of pkts from the same remote host will all happen on the same CPU and the performance may be suboptimal. I'm including some rough preliminary performance numbers below. Note that the performance will be highly dependent on traffic load, mix as usual. Moreover it also depends on NIC offload features hence the following is by no means a comprehesive study. Local testing and tuning will be needed to decide the best setting. All tests spawned 50 copies of netperf TCP_STREAM and ran for 30 secs. (super_netperf 50 -H 192.168.1.18 -l 30) An IP GRE tunnel with only the key flag on (e.g., ip tunnel add gre1 mode gre local 10.246.17.18 remote 10.246.17.17 ttl 255 key 123) is configured. The GRO support for pkts AFTER decap are controlled through the device feature of the GRE device (e.g., ethtool -K gre1 gro on/off). 1.1 ethtool -K gre1 gro off; ethtool -K eth0 gro off thruput: 9.16Gbps CPU utilization: 19% 1.2 ethtool -K gre1 gro on; ethtool -K eth0 gro off thruput: 5.9Gbps CPU utilization: 15% 1.3 ethtool -K gre1 gro off; ethtool -K eth0 gro on thruput: 9.26Gbps CPU utilization: 12-13% 1.4 ethtool -K gre1 gro on; ethtool -K eth0 gro on thruput: 9.26Gbps CPU utilization: 10% The following tests were performed on a different NIC that is capable of csum offload. I.e., the h/w is capable of computing IP payload csum (CHECKSUM_COMPLETE). 2.1 ethtool -K gre1 gro on (hence will use gro_cells) 2.1.1 ethtool -K eth0 gro off; csum offload disabled thruput: 8.53Gbps CPU utilization: 9% 2.1.2 ethtool -K eth0 gro off; csum offload enabled thruput: 8.97Gbps CPU utilization: 7-8% 2.1.3 ethtool -K eth0 gro on; csum offload disabled thruput: 8.83Gbps CPU utilization: 5-6% 2.1.4 ethtool -K eth0 gro on; csum offload enabled thruput: 8.98Gbps CPU utilization: 5% 2.2 ethtool -K gre1 gro off 2.2.1 ethtool -K eth0 gro off; csum offload disabled thruput: 5.93Gbps CPU utilization: 9% 2.2.2 ethtool -K eth0 gro off; csum offload enabled thruput: 5.62Gbps CPU utilization: 8% 2.2.3 ethtool -K eth0 gro on; csum offload disabled thruput: 7.69Gbps CPU utilization: 8% 2.2.4 ethtool -K eth0 gro on; csum offload enabled thruput: 8.96Gbps CPU utilization: 5-6% Signed-off-by: NH.K. Jerry Chu <hkchu@google.com> Reviewed-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 05 1月, 2014 1 次提交
-
-
由 Li RongQing 提交于
They are same, so unify them as one, pcpu_sw_netstats. Define pcpu_sw_netstat in netdevice.h, remove pcpu_tstats from if_tunnel and remove br_cpu_netstats from br_private.h Cc: Cong Wang <xiyou.wangcong@gmail.com> Cc: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: NLi RongQing <roy.qing.li@gmail.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 1月, 2014 1 次提交
-
-
由 Daniel Borkmann 提交于
While we're at it and introduced CGROUP_NET_CLASSID, lets also make NETPRIO_CGROUP more consistent with the rest of cgroups and rename it into CONFIG_CGROUP_NET_PRIO so that for networking, we now have CONFIG_CGROUP_NET_{PRIO,CLASSID}. This not only makes the CONFIG option consistent among networking cgroups, but also among cgroups CONFIG conventions in general as the vast majority has a prefix of CONFIG_CGROUP_<SUBSYS>. Signed-off-by: NDaniel Borkmann <dborkman@redhat.com> Cc: Zefan Li <lizefan@huawei.com> Cc: cgroups@vger.kernel.org Acked-by: NLi Zefan <lizefan@huawei.com> Signed-off-by: NPablo Neira Ayuso <pablo@netfilter.org>
-
- 03 1月, 2014 1 次提交
-
-
由 Wei-Chun Chao 提交于
VM to VM GSO traffic is broken if it goes through VXLAN or GRE tunnel and the physical NIC on the host supports hardware VXLAN/GRE GSO offload (e.g. bnx2x and next-gen mlx4). Two issues - (VXLAN) VM traffic has SKB_GSO_DODGY and SKB_GSO_UDP_TUNNEL with SKB_GSO_TCP/UDP set depending on the inner protocol. GSO header integrity check fails in udp4_ufo_fragment if inner protocol is TCP. Also gso_segs is calculated incorrectly using skb->len that includes tunnel header. Fix: robust check should only be applied to the inner packet. (VXLAN & GRE) Once GSO header integrity check passes, NULL segs is returned and the original skb is sent to hardware. However the tunnel header is already pulled. Fix: tunnel header needs to be restored so that hardware can perform GSO properly on the original packet. Signed-off-by: NWei-Chun Chao <weichunc@plumgrid.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 02 1月, 2014 1 次提交
-
-
由 stephen hemminger 提交于
The following functions are not used outside of net/core/dev.c and should be declared static. call_netdevice_notifiers_info __dev_remove_offload netdev_has_any_upper_dev __netdev_adjacent_dev_remove __netdev_adjacent_dev_link_lists __netdev_adjacent_dev_unlink_lists __netdev_adjacent_dev_unlink __netdev_adjacent_dev_link_neighbour __netdev_adjacent_dev_unlink_neighbour And the following are never used and should be deleted netdev_lower_dev_get_private_rcu __netdev_find_adj_rcu Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 1月, 2014 1 次提交
-
-
由 David S. Miller 提交于
When the vlan code detects that the real device can do TX VLAN offloads in hardware, it tries to arrange for the real device's header_ops to be invoked directly. But it does so illegally, by simply hooking the real device's header_ops up to the VLAN device. This doesn't work because we will end up invoking a set of header_ops routines which expect a device type which matches the real device, but will see a VLAN device instead. Fix this by providing a pass-thru set of header_ops which will arrange to pass the proper real device instead. To facilitate this add a dev_rebuild_header(). There are implementations which provide a ->cache and ->create but not a ->rebuild (f.e. PLIP). So we need a helper function just like dev_hard_header() to avoid crashes. Use this helper in the one existing place where the header_ops->rebuild was being invoked, the neighbour code. With lots of help from Florian Westphal. Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 18 12月, 2013 1 次提交
-
-
由 stephen hemminger 提交于
These function to manipulate multiple addresses are not used anywhere in current net-next tree. Some out of tree code maybe using these but too bad; they should submit their code upstream.. Also, make __hw_addr_flush local since only used by dev_addr_lists.c Signed-off-by: NStephen Hemminger <stephen@networkplumber.org> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 12月, 2013 1 次提交
-
-
由 dingtianhong 提交于
The bond_first_slave_rcu() will be used to instead of bond_first_slave() in rcu_read_lock(). According to the Jay Vosburgh's suggestion, the struct netdev_adjacent should hide from users who wanted to use it directly. so I package a new function to get the first slave of the bond. Suggested-by: NNikolay Aleksandrov <nikolay@redhat.com> Suggested-by: NJay Vosburgh <fubar@us.ibm.com> Suggested-by: NVeaceslav Falico <vfalico@redhat.com> Signed-off-by: NDing Tianhong <dingtianhong@huawei.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 13 12月, 2013 2 次提交
-
-
由 Sebastian Siewior 提交于
neigh_priv_len is defined as u8. With all debug enabled struct ipoib_neigh has 200 bytes. The largest part is sk_buff_head with 96 bytes and here the spinlock with 72 bytes. The size value still fits in this u8 leaving some room for more. On -RT struct ipoib_neigh put on weight and has 392 bytes. The main reason is sk_buff_head with 288 and the fatty here is spinlock with 192 bytes. This does no longer fit into into neigh_priv_len and gcc complains. This patch changes neigh_priv_len from being 8bit to 16bit. Since the following element (dev_id) is 16bit followed by a spinlock which is aligned, the struct remains with a total size of 3200 (allmodconfig) / 2048 (with as much debug off as possible) bytes on x86-64. On x86-32 the struct is 1856 (allmodconfig) / 1216 (with as much debug off as possible) bytes long. The numbers were gained with and without the patch to prove that this change does not increase the size of the struct. Cc: Steven Rostedt <rostedt@goodmis.org> Cc: Thomas Gleixner <tglx@linutronix.de> Signed-off-by: NSebastian Andrzej Siewior <bigeasy@linutronix.de> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Jerry Chu 提交于
This patch modifies the GRO stack to avoid the use of "network_header" and associated macros like ip_hdr() and ipv6_hdr() in order to allow an arbitary number of IP hdrs (v4 or v6) to be used in the encapsulation chain. This lays the foundation for various IP tunneling support (IP-in-IP, GRE, VXLAN, SIT,...) to be added later. With this patch, the GRO stack traversing now is mostly based on skb_gro_offset rather than special hdr offsets saved in skb (e.g., skb->network_header). As a result all but the top layer (i.e., the the transport layer) must have hdrs of the same length in order for a pkt to be considered for aggregation. Therefore when adding a new encap layer (e.g., for tunneling), one must check and skip flows (e.g., by setting NAPI_GRO_CB(p)->same_flow to 0) that have a different hdr length. Note that unlike the network header, the transport header can and will continue to be set by the GRO code since there will be at most one "transport layer" in the encap chain. Signed-off-by: NH.K. Jerry Chu <hkchu@google.com> Suggested-by: NEric Dumazet <edumazet@google.com> Reviewed-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 11 12月, 2013 1 次提交
-
-
由 Ying Xue 提交于
TIPC is currently using the field 'af_packet_priv' in struct net_device as a handle to find the bearer instance associated to the given network device. But, by doing so it is blocking other networking cleanups, such as the one discussed here: http://patchwork.ozlabs.org/patch/178044/ This commit removes this usage from TIPC. Instead, we introduce a new field, 'tipc_ptr', to the net_device structure, to serve this purpose. When TIPC bearer is enabled, the bearer object is associated to 'tipc_ptr'. When a TIPC packet arrives in the recv_msg() upcall from a networking device, the bearer object can now be obtained from 'tipc_ptr'. When a bearer is disabled, the bearer object is detached from its underlying network device by setting 'tipc_ptr' to NULL. Additionally, an RCU lock is used to protect the new pointer. Henceforth, the existing tipc_net_lock is used in write mode to serialize write accesses to this pointer, while the new RCU lock is applied on the read side to ensure that the pointer is 100% valid within its wrapped area for all readers. Signed-off-by: NYing Xue <ying.xue@windriver.com> Cc: Patrick McHardy <kaber@trash.net> Reviewed-by: NPaul Gortmaker <paul.gortmaker@windriver.com> Signed-off-by: NJon Maloy <jon.maloy@ericsson.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 12月, 2013 1 次提交
-
-
由 Eric Dumazet 提交于
Some network drivers use dev_kfree_skb_any() and dev_kfree_skb_irq() helpers to free skbs, both for dropped packets and TX completed ones. We need to separate the two causes to get better diagnostics given by dropwatch or "perf record -e skb:kfree_skb" This patch provides two new helpers, dev_consume_skb_any() and dev_consume_skb_irq() to be used for consumed skbs. __dev_kfree_skb_irq() is slightly optimized to remove one atomic_dec_and_test() in fast path, and use this_cpu_{r|w} accessors. Signed-off-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 08 11月, 2013 2 次提交
-
-
由 John Fastabend 提交于
Add a operations structure that allows a network interface to export the fact that it supports package forwarding in hardware between physical interfaces and other mac layer devices assigned to it (such as macvlans). This operaions structure can be used by virtual mac devices to bypass software switching so that forwarding can be done in hardware more efficiently. Signed-off-by: NJohn Fastabend <john.r.fastabend@intel.com> Signed-off-by: NNeil Horman <nhorman@tuxdriver.com> CC: Andy Gospodarek <andy@greyhouse.net> CC: "David S. Miller" <davem@davemloft.net> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Dan Carpenter 提交于
There is a bug in cpsw_probe() where we do: ndev->irq = platform_get_irq(pdev, 0); if (ndev->irq < 0) { The problem is that "ndev->irq" is unsigned so the error handling doesn't work. I have changed it to a regular int. Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 04 11月, 2013 1 次提交
-
-
由 Eric Dumazet 提交于
Joby Poriyath provided a xen-netback patch to reduce the size of xenvif structure as some netdev allocation could fail under memory pressure/fragmentation. This patch is handling the problem at the core level, allowing any netdev structures to use vmalloc() if kmalloc() failed. As vmalloc() adds overhead on a critical network path, add __GFP_REPEAT to kzalloc() flags to do this fallback only when really needed. Signed-off-by: NEric Dumazet <edumazet@google.com> Reported-by: NJoby Poriyath <joby.poriyath@citrix.com> Cc: Ben Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 29 10月, 2013 1 次提交
-
-
由 Jacob Keller 提交于
napi_disable uses an msleep() call to wait for outstanding napi work to be finished after setting the disable bit. It does not always sleep incase there was no outstanding work. This resulted in a rare bug in ixgbe_down operation where a napi_disable call took place inside of a local_bh_disable()d context. In order to enable easier detection of future sleep while atomic BUGs, this patch adds a might_sleep() call, so that every use of napi_disable during atomic context will be visible. Signed-off-by: NJacob Keller <jacob.e.keller@intel.com> Cc: Eliezer Tamir <eliezer.tamir@linux.intel.com> Cc: Alexander Duyck <alexander.duyck@intel.com> Cc: Hyong-Youb Kim <hykim@myri.com> Cc: Amir Vadai <amirv@mellanox.com> Cc: Dmitry Kravkov <dmitry@broadcom.com> Tested-by: NPhil Schmitt <phillip.j.schmitt@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com>
-
- 18 10月, 2013 1 次提交
-
-
由 Ben Hutchings 提交于
Macro definitions should not normally end with a semi-colon, as this makes it dangerous to use them an if...else statement. Happily this has not happened yet. Signed-off-by: NBen Hutchings <bhutchings@solarflare.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 14 10月, 2013 1 次提交
-
-
由 Maxime Jayat 提交于
Correct common misspelling of "identify" as "indentify" throughout the kernel Signed-off-by: NMaxime Jayat <maxime@artisandeveloppeur.fr> Signed-off-by: NJiri Kosina <jkosina@suse.cz>
-
- 08 10月, 2013 2 次提交
-
-
由 Eric W. Biederman 提交于
Separate the unreg_list and the close_list in dev_close_many preventing dev_close_many from permuting the unreg_list. The permutations of the unreg_list have resulted in cases where the loopback device is accessed it has been freed in code such as dst_ifdown. Resulting in subtle memory corruption. This is the second bug from sharing the storage between the close_list and the unreg_list. The issues that crop up with sharing are apparently too subtle to show up in normal testing or usage, so let's forget about being clever and use two separate lists. v2: Make all callers pass in a close_list to dev_close_many Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Michael S. Tsirkin 提交于
virtio wants to pass in cpumask_of(cpu), make parameter const to avoid build warnings. Signed-off-by: NMichael S. Tsirkin <mst@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 01 10月, 2013 1 次提交
-
-
由 Nicolas Dichtel 提交于
This patch only prepares the next one, there is no functional change. Now, __dev_notify_flags() can also be used to notify flags changes via rtnetlink. Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 27 9月, 2013 6 次提交
-
-
由 Joe Perches 提交于
There are a mix of function prototypes with and without extern in the kernel sources. Standardize on not using extern for function prototypes. Function prototypes don't need to be written with extern. extern is assumed by the compiler. Its use is as unnecessary as using auto to declare automatic/local variables in a block. Signed-off-by: NJoe Perches <joe@perches.com>
-
由 Tejun Heo 提交于
sysfs ns (namespace) implementation became more convoluted than necessary while trying to hide ns information from visible interface. The relatively recent attr ns support is a good example. * attr ns tag is determined by sysfs_ops->namespace() callback while dir tag is determined by kobj_type->namespace(). The placement is arbitrary. * Instead of performing operations with explicit ns tag, the namespace callback is routed through sysfs_attr_ns(), sysfs_ops->namespace(), class_attr_namespace(), class_attr->namespace(). It's not simpler in any sense. The only thing this convolution does is traversing the whole stack backwards. The namespace callbacks are unncessary because the operations involved are inherently synchronous. The information can be provided in in straight-forward top-down direction and reversing that direction is unnecessary and against basic design principles. This backward interface is unnecessarily convoluted and hinders properly separating out sysfs from driver model / kobject for proper layering. This patch updates attr ns support such that * sysfs_ops->namespace() and class_attr->namespace() are dropped. * sysfs_{create|remove}_file_ns(), which take explicit @ns param, are added and sysfs_{create|remove}_file() are now simple wrappers around the ns aware functions. * ns handling is dropped from sysfs_chmod_file(). Nobody uses it at this point. sysfs_chmod_file_ns() can be added later if necessary. * Explicit @ns is propagated through class_{create|remove}_file_ns() and netdev_class_{create|remove}_file_ns(). * driver/net/bonding which is currently the only user of attr namespace is updated to use netdev_class_{create|remove}_file_ns() with @bh->net as the ns tag instead of using the namespace callback. This patch should be an equivalent conversion without any functional difference. It makes the code easier to follow, reduces lines of code a bit and helps proper separation and layering. Signed-off-by: NTejun Heo <tj@kernel.org> Cc: Eric W. Biederman <ebiederm@xmission.com> Cc: Kay Sievers <kay@vrfy.org> Acked-by: NDavid S. Miller <davem@davemloft.net> Signed-off-by: NGreg Kroah-Hartman <gregkh@linuxfoundation.org>
-
由 Veaceslav Falico 提交于
It will be useful to get first/last element. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NVeaceslav Falico <vfalico@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Veaceslav Falico 提交于
Add a possibility to iterate through netdev_adjacent's private, currently only for lower neighbours. Add both RCU and RTNL/other locking variants of iterators, and make the non-rcu variant to be safe from removal. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NVeaceslav Falico <vfalico@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Veaceslav Falico 提交于
Currently, even though we can access any linked device, we can't attach anything to it, which is vital to properly manage them. To fix this, add a new void *private to netdev_adjacent and functions setting/getting it (per link), so that we can save, per example, bonding's slave structures there, per slave device. netdev_master_upper_dev_link_private(dev, upper_dev, private) links dev to upper dev and populates the neighbour link only with private. netdev_lower_dev_get_private{,_rcu}() returns the private, if found. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> Signed-off-by: NVeaceslav Falico <vfalico@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Veaceslav Falico 提交于
Currently, we distinguish neighbours (first-level linked devices) from non-neighbours by the neighbour bool in the netdev_adjacent. This could be quite time-consuming in case we would like to traverse *only* through neighbours - cause we'd have to traverse through all devices and check for this flag, and in a (quite common) scenario where we have lots of vlans on top of bridge, which is on top of a bond - the bonding would have to go through all those vlans to get its upper neighbour linked devices. This situation is really unpleasant, cause there are already a lot of cases when a device with slaves needs to go through them in hot path. To fix this, introduce a new upper/lower device lists structure - adj_list, which contains only the neighbours. It works always in pair with the all_adj_list structure (renamed from upper/lower_dev_list), i.e. both of them contain the same links, only that all_adj_list contains also non-neighbour device links. It's really a small change visible, currently, only for __netdev_adjacent_dev_insert/remove(), and doesn't change the main linked logic at all. Also, add some comments a fix a name collision in netdev_for_each_upper_dev_rcu() and rework the naming by the following rules: netdev_(all_)(upper|lower)_* If "all_" is present, then we work with the whole list of upper/lower devices, otherwise - only with direct neighbours. Uninline functions - to get better stack traces. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: NVeaceslav Falico <vfalico@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 16 9月, 2013 1 次提交
-
-
由 Joseph Gasparakis 提交于
This patch fixes sparse warnings when incorrectly handling the port number and using int instead of unsigned int iterating through &vn->sock_list[]. Keeping the port as __be16 also makes things clearer wrt endianess. Also, it was pointed out that vxlan_get_rx_port() had unnecessary checks which got removed. Signed-off-by: NJoseph Gasparakis <joseph.gasparakis@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 07 9月, 2013 1 次提交
-
-
由 Florian Fainelli 提交于
Provide a kernel-doc comment documentation for the BQL helpers: - netdev_sent_queue - netdev_completed_queue - netdev_reset_queue Similarly to how it is done for the other functions, the documentation only covers the function operating on struct net_device and not struct netdev_queue. Signed-off-by: NFlorian Fainelli <f.fainelli@gmail.com> Acked-by: NEric Dumazet <edumazet@google.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 06 9月, 2013 1 次提交
-
-
由 Joseph Gasparakis 提交于
This patch adds two more ndo ops: ndo_add_rx_vxlan_port() and ndo_del_rx_vxlan_port(). Drivers can get notifications through the above functions about changes of the UDP listening port of VXLAN. Also, when physical ports come up, now they can call vxlan_get_rx_port() in order to obtain the port number(s) of the existing VXLAN interface in case they already up before them. This information about the listening UDP port would be used for VXLAN related offloads. A big thank you to John Fastabend (john.r.fastabend@intel.com) for his input and his suggestions on this patch set. CC: John Fastabend <john.r.fastabend@intel.com> CC: Stephen Hemminger <stephen@networkplumber.org> Signed-off-by: NJoseph Gasparakis <joseph.gasparakis@intel.com> Signed-off-by: NJeff Kirsher <jeffrey.t.kirsher@intel.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
- 30 8月, 2013 2 次提交
-
-
由 Veaceslav Falico 提交于
The new macro netdev_for_each_upper_dev_rcu(dev, upper, iter) iterates through the dev->upper_dev_list starting from the first element, using the netdev_upper_get_next_dev_rcu(dev, &iter). Must be called under RCU read lock. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: NVeaceslav Falico <vfalico@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Veaceslav Falico 提交于
This patch adds lower_dev_list list_head to net_device, which is the same as upper_dev_list, only for lower devices, and begins to use it in the same way as the upper list. It also changes the way the whole adjacent device lists work - now they contain *all* of upper/lower devices, not only the first level. The first level devices are distinguished by the bool neighbour field in netdev_adjacent, also added by this patch. There are cases when a device can be added several times to the adjacent list, the simplest would be: /---- eth0.10 ---\ eth0- --- bond0 \---- eth0.20 ---/ where both bond0 and eth0 'see' each other in the adjacent lists two times. To avoid duplication of netdev_adjacent structures ref_nr is being kept as the number of times the device was added to the list. The 'full view' is achieved by adding, on link creation, all of the upper_dev's upper_dev_list devices as upper devices to all of the lower_dev's lower_dev_list devices (and to the lower_dev itself), and vice versa. On unlink they are removed using the same logic. I've tested it with thousands vlans/bonds/bridges, everything works ok and no observable lags even on a huge number of interfaces. Memory footprint for 128 devices interconnected with each other via both upper and lower (which is impossible, but for the comparison) lists would be: 128*128*2*sizeof(netdev_adjacent) = 1.5MB but in the real world we usualy have at most several devices with slaves and a lot of vlans, so the footprint will be much lower. CC: "David S. Miller" <davem@davemloft.net> CC: Eric Dumazet <edumazet@google.com> CC: Jiri Pirko <jiri@resnulli.us> CC: Alexander Duyck <alexander.h.duyck@intel.com> CC: Cong Wang <amwang@redhat.com> Signed-off-by: NVeaceslav Falico <vfalico@redhat.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-