Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 20 11月, 2014 2 次提交
    • N
      KVM: x86: Stack size is overridden by __linearize · 1c1c35ae
      由 Nadav Amit 提交于 
      When performing segmented-read/write in the emulator for stack operations, it
ignores the stack size, and uses the ad_bytes as indication for the pointer
size. As a result, a wrong address may be accessed.

To fix this behavior, we can remove the masking of address in __linearize and
perform it beforehand.  It is already done for the operands (so currently it is
inefficiently done twice). It is missing in two cases:
1. When using rip_relative
2. On fetch_bit_operand that changes the address.

This patch masks the address on these two occassions, and removes the masking
from __linearize.

Note that it does not mask EIP during fetch. In protected/legacy mode code
fetch when RIP >= 2^32 should result in #GP and not wrap-around. Since we make
limit checks within __linearize, this is the expected behavior.

Partial revert of commit 518547b3 (KVM: x86: Emulator does not
calculate address correctly, 2014-09-30).
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      1c1c35ae
    • N
      KVM: x86: Revert NoBigReal patch in the emulator · 7d882ffa
      由 Nadav Amit 提交于 
      Commit 10e38fc7cab6 ("KVM: x86: Emulator flag for instruction that only support
16-bit addresses in real mode") introduced NoBigReal for instructions such as
MONITOR. Apparetnly, the Intel SDM description that led to this patch is
misleading.  Since no instruction is using NoBigReal, it is safe to remove it,
we fully understand what the SDM means.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      7d882ffa
  3. 18 11月, 2014 2 次提交
  5. 17 11月, 2014 5 次提交
    • N
      KVM: x86: Fix lost interrupt on irr_pending race · f210f757
      由 Nadav Amit 提交于 
      apic_find_highest_irr assumes irr_pending is set if any vector in APIC_IRR is
set.  If this assumption is broken and apicv is disabled, the injection of
interrupts may be deferred until another interrupt is delivered to the guest.
Ultimately, if no other interrupt should be injected to that vCPU, the pending
interrupt may be lost.

commit 56cc2406 ("KVM: nVMX: fix "acknowledge interrupt on exit" when APICv
is in use") changed the behavior of apic_clear_irr so irr_pending is cleared
after setting APIC_IRR vector. After this commit, if apic_set_irr and
apic_clear_irr run simultaneously, a race may occur, resulting in APIC_IRR
vector set, and irr_pending cleared. In the following example, assume a single
vector is set in IRR prior to calling apic_clear_irr:

apic_set_irr				apic_clear_irr
------------				--------------
apic->irr_pending = true;
					apic_clear_vector(...);
					vec = apic_search_irr(apic);
					// => vec == -1
apic_set_vector(...);
					apic->irr_pending = (vec != -1);
					// => apic->irr_pending == false

Nonetheless, it appears the race might even occur prior to this commit:

apic_set_irr				apic_clear_irr
------------				--------------
apic->irr_pending = true;
					apic->irr_pending = false;
					apic_clear_vector(...);
					if (apic_search_irr(apic) != -1)
						apic->irr_pending = true;
					// => apic->irr_pending == false
apic_set_vector(...);

Fixing this issue by:
1. Restoring the previous behavior of apic_clear_irr: clear irr_pending, call
   apic_clear_vector, and then if APIC_IRR is non-zero, set irr_pending.
2. On apic_set_irr: first call apic_set_vector, then set irr_pending.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      f210f757
    • P
      KVM: compute correct map even if all APICs are software disabled · a3e339e1
      由 Paolo Bonzini 提交于 
      Logical destination mode can be used to send NMI IPIs even when all
APICs are software disabled, so if all APICs are software disabled we
should still look at the DFRs.

So the DFRs should all be the same, even if some or all APICs are
software disabled.  However, the SDM does not say this, so tweak
the logic as follows:

- if one APIC is enabled and has LDR != 0, use that one to build the map.
This picks the right DFR in case an OS is only setting it for the
software-enabled APICs, or in case an OS is using logical addressing
on some APICs while leaving the rest in reset state (using LDR was
suggested by Radim).

- if all APICs are disabled, pick a random one to build the map.
We use the last one with LDR != 0 for simplicity.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      a3e339e1
    • N
      KVM: x86: Software disabled APIC should still deliver NMIs · 173beedc
      由 Nadav Amit 提交于 
      Currently, the APIC logical map does not consider VCPUs whose local-apic is
software-disabled.  However, NMIs, INIT, etc. should still be delivered to such
VCPUs. Therefore, the APIC mode should first be determined, and then the map,
considering all VCPUs should be constructed.

To address this issue, first find the APIC mode, and only then construct the
logical map.
Signed-off-by: NNadav Amit <namit@cs.technion.ac.il>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      173beedc
    • P
      kvm: simplify update_memslots invocation · 5cc15027
      由 Paolo Bonzini 提交于 
      The update_memslots invocation is only needed in one case.  Make
the code clearer by moving it to __kvm_set_memory_region, and
removing the wrapper around insert_memslot.
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NTakuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      5cc15027
    • P
      kvm: commonize allocation of the new memory slots · f2a81036
      由 Paolo Bonzini 提交于 
      The two kmemdup invocations can be unified.  I find that the new
placement of the comment makes it easier to see what happens.
Reviewed-by: NIgor Mammedov <imammedo@redhat.com>
Reviewed-by: NTakuya Yoshikawa <yoshikawa_takuya_b1@lab.ntt.co.jp>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      f2a81036
  7. 14 11月, 2014 3 次提交
  9. 13 11月, 2014 1 次提交
    • C
      kvm: svm: move WARN_ON in svm_adjust_tsc_offset · d913b904
      由 Chris J Arges 提交于 
      When running the tsc_adjust kvm-unit-test on an AMD processor with the
IA32_TSC_ADJUST feature enabled, the WARN_ON in svm_adjust_tsc_offset can be
triggered. This WARN_ON checks for a negative adjustment in case __scale_tsc
is called; however it may trigger unnecessary warnings.

This patch moves the WARN_ON to trigger only if __scale_tsc will actually be
called from svm_adjust_tsc_offset. In addition make adj in kvm_set_msr_common
s64 since this can have signed values.
Signed-off-by: NChris J Arges <chris.j.arges@canonical.com>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      d913b904
  11. 12 11月, 2014 2 次提交
    • A
      x86, kvm, vmx: Don't set LOAD_IA32_EFER when host and guest match · 54b98bff
      由 Andy Lutomirski 提交于 
      There's nothing to switch if the host and guest values are the same.
I am unable to find evidence that this makes any difference
whatsoever.
Signed-off-by: NAndy Lutomirski <luto@amacapital.net>
[I could see a difference on Nehalem.  From 5 runs:

 userspace exit, guest!=host   12200 11772 12130 12164 12327
 userspace exit, guest=host    11983 11780 11920 11919 12040
 lightweight exit, guest!=host  3214  3220  3238  3218  3337
 lightweight exit, guest=host   3178  3193  3193  3187  3220

 This passes the t-test with 99% confidence for userspace exit,
 98.5% confidence for lightweight exit. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      54b98bff
    • A
      x86, kvm, vmx: Always use LOAD_IA32_EFER if available · f6577a5f
      由 Andy Lutomirski 提交于 
      At least on Sandy Bridge, letting the CPU switch IA32_EFER is much
faster than switching it manually.

I benchmarked this using the vmexit kvm-unit-test (single run, but
GOAL multiplied by 5 to do more iterations):

Test                                  Before      After    Change
cpuid                                   2000       1932    -3.40%
vmcall                                  1914       1817    -5.07%
mov_from_cr8                              13         13     0.00%
mov_to_cr8                                19         19     0.00%
inl_from_pmtimer                       19164      10619   -44.59%
inl_from_qemu                          15662      10302   -34.22%
inl_from_kernel                         3916       3802    -2.91%
outl_to_kernel                          2230       2194    -1.61%
mov_dr                                   172        176     2.33%
ipi                                (skipped)  (skipped)
ipi+halt                           (skipped)  (skipped)
ple-round-robin                           13         13     0.00%
wr_tsc_adjust_msr                       1920       1845    -3.91%
rd_tsc_adjust_msr                       1892       1814    -4.12%
mmio-no-eventfd:pci-mem                16394      11165   -31.90%
mmio-wildcard-eventfd:pci-mem           4607       4645     0.82%
mmio-datamatch-eventfd:pci-mem          4601       4610     0.20%
portio-no-eventfd:pci-io               11507       7942   -30.98%
portio-wildcard-eventfd:pci-io          2239       2225    -0.63%
portio-datamatch-eventfd:pci-io         2250       2234    -0.71%

I haven't explicitly computed the significance of these numbers,
but this isn't subtle.
Signed-off-by: NAndy Lutomirski <luto@amacapital.net>
[The results were reproducible on all of Nehalem, Sandy Bridge and
 Ivy Bridge.  The slowness of manual switching is because writing
 to EFER with WRMSR triggers a TLB flush, even if the only bit you're
 touching is SCE (so the page table format is not affected).  Doing
 the write as part of vmentry/vmexit, instead, does not flush the TLB,
 probably because all processors that have EPT also have VPID. - Paolo]
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
      f6577a5f
  13. 10 11月, 2014 1 次提交
  15. 08 11月, 2014 7 次提交
  17. 07 11月, 2014 17 次提交