Adds the set-2038 test which sets the time to near-edge cases
like the start and end of the 32 bit epoch and checks that
time behaves properly. There is also a dangerous mode, which
lets the clock roll over past 2038 on 32bit systems, which
on some older kernels will cause system hangs.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

This patch adds the set-tai test which ensures the tai offset
can be set properly from adjtimex.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

This change adds the leapcrash test which tests to see if a
leapsecond deadlock which was observed from 2.6.26 to 3.3
is present on this system.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

This change adds the leap-a-day test which sets STA_INS and
STA_DEL each day to trigger leapseconds each day. It also
has a mode to jump the time to right before the end of the
day each iteration.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

Adds the clocksource-switch tests which continually switches the
current clocksource between all the available ones, watching for
any timekeeping inconsistencies.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

This change adds the skew_consistency test, which twists the
ADJ_FREQUENCY knob back and forth and watches for timekeeping
inconsistencies.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

This patch adds the change_skew test which validates the
adjtimex freq can be set to various values and then using
the inconsistency-check, raw_skew, and nanosleep tests
ensures time behaves properly.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

This adds the alarmtimer-suspend test from the timetests suite,
which tests that the alarmtimers wake the system up from suspend
shortly after the time they were set to fire.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

This adds a adjtimex validation test which checks the behavior
for a set of valida and invalid inputs. So far this only tests
ADJ_FREQUENCY, but hopefully will grow.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

Add test to validate mqueue timeout latency from the timetest suite

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

Add the threaded time inconsistency test from the timetest suite.
This checks for time inconsistencies between cpus, usually associated
with clock skew as sometimes found w/ TSCs.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

Add my set-timer-lat test from the timetest suite. This
test checks the latency from set_timer and reports if
any are unreasonable (>40ms).

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

This adds my clock skew estimation test from the timetest suite.
It measures the drift between CLOCK_MONOTONIC and CLOCK_MONOTONIC_RAW
and compares it with the current frequency value from adjtimex.

It sometimes can trigger false failures when ntpd isn't in a
steady state, but its a useful too when doing adjtimex testing.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

Adds my nanosleep latency test from the timetest suite.
This checks to make sure we don't see "unreasonable"
latencies (> 40ms) when calling nanosleep.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

This adds my inconsistency-test from my timetests suite,
which checks for (single threaded) time inconsistencies
across the various clockids.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

Add my basic nanosleep test from my timetest suite.
This test validates that nanosleep doesn't return early
against a number of clockids.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

Try to streamline the makefile so its easier to add timer/timekeeping
tests.

Also adds support for the CROSS_COMPILE variable.

Cc: Shuah Khan <shuahkh@osg.samsung.com>
Cc: Prarit Bhargava <prarit@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Richard Cochran <richardcochran@gmail.com>
Signed-off-by: NJohn Stultz <john.stultz@linaro.org>
Tested-by: NPrarit Bhargava <prarit@redhat.com>
Signed-off-by: NShuah Khan <shuahkh@osg.samsung.com>

Add some initial basic tests on a few posix timers interface such as
setitimer() and timer_settime().

These simply check that expiration happens in a reasonable timeframe after
expected elapsed clock time (user time, user + system time, real time,
...).

This is helpful for finding basic breakages while hacking
on this subsystem.
Signed-off-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Stanislaw Gruszka <sgruszka@redhat.com>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Steven Rostedt <rostedt@goodmis.org>
Cc: KOSAKI Motohiro <kosaki.motohiro@gmail.com>
Cc: Olivier Langlois <olivier@trillion01.com>
Signed-off-by: NAndrew Morton <akpm@linux-foundation.org>