Fix CI data transfer regression introduced by previous cleanup.
Signed-off-by: NOliver Endriss <o.endriss@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Some v4l drivers currently don't initialize their struct v4l2_subdev
with zeros, and this is a problem since some of the v4l2 code expects
this. One example is the addition of internal_ops in commit 45f6f84a,
after that we are at risk of random oopses with these drivers when code
in v4l2_device_register_subdev tries to dereference sd->internal_ops->*,
as can be shown by the report at http://bugs.launchpad.net/bugs/745213
and analysis of its crash at https://lkml.org/lkml/2011/4/1/168

Use kzalloc within problematic drivers to ensure we have a zeroed struct
v4l2_subdev.

BugLink: http://bugs.launchpad.net/bugs/745213
Cc: <stable@kernel.org>
Signed-off-by: NHerton Ronaldo Krzesinski <herton.krzesinski@canonical.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Forgot to add the DVB_STV0299/DVB_PLL to config
Signed-off-by: NMalcolm Priestley <tvboxspy@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The following is a patch to avoid a kernel oops when running rmmod
saa7134 on kernel 2.6.27.1. The change is as suggested by mchehab on
irc.freenode.org
Signed-off-by: NHussam Al-Tayeb <ht990332@gmail.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The imon_ir_change_protocol function gets called two different ways, one
way is from rc_register_device, for initial protocol selection/setup,
and the other is via a userspace-initiated protocol change request,
either by direct sysfs prodding or by something like ir-keytable.

In the rc_register_device case, the imon context lock is already held,
but when initiated from userspace, it is not, so we must acquire it,
prior to calling send_packet, which requires that the lock is held.

Without this change, there's an easily reproduceable deadlock when
another function calls send_packet (such as either of the display write
fops) after a userspace-initiated change_protocol.

With a lock-debugging-enabled kernel, I was getting this:

[   15.014153] =====================================
[   15.015048] [ BUG: bad unlock balance detected! ]
[   15.015048] -------------------------------------
[   15.015048] ir-keytable/773 is trying to release lock (&ictx->lock) at:
[   15.015048] [<ffffffff814c6297>] mutex_unlock+0xe/0x10
[   15.015048] but there are no more locks to release!
[   15.015048]
[   15.015048] other info that might help us debug this:
[   15.015048] 2 locks held by ir-keytable/773:
[   15.015048]  #0:  (&buffer->mutex){+.+.+.}, at: [<ffffffff8119d400>] sysfs_write_file+0x3c/0x144
[   15.015048]  #1:  (s_active#87){.+.+.+}, at: [<ffffffff8119d4ab>] sysfs_write_file+0xe7/0x144
[   15.015048]
[   15.015048] stack backtrace:
[   15.015048] Pid: 773, comm: ir-keytable Not tainted 2.6.38.4-20.fc15.x86_64.debug #1
[   15.015048] Call Trace:
[   15.015048]  [<ffffffff81089715>] ? print_unlock_inbalance_bug+0xca/0xd5
[   15.015048]  [<ffffffff8108b35c>] ? lock_release_non_nested+0xc1/0x263
[   15.015048]  [<ffffffff814c6297>] ? mutex_unlock+0xe/0x10
[   15.015048]  [<ffffffff814c6297>] ? mutex_unlock+0xe/0x10
[   15.015048]  [<ffffffff8108b67b>] ? lock_release+0x17d/0x1a4
[   15.015048]  [<ffffffff814c6229>] ? __mutex_unlock_slowpath+0xc5/0x125
[   15.015048]  [<ffffffff814c6297>] ? mutex_unlock+0xe/0x10
[   15.015048]  [<ffffffffa02964b6>] ? send_packet+0x1c9/0x264 [imon]
[   15.015048]  [<ffffffff8108b376>] ? lock_release_non_nested+0xdb/0x263
[   15.015048]  [<ffffffffa0296731>] ? imon_ir_change_protocol+0x126/0x15e [imon]
[   15.015048]  [<ffffffffa024a334>] ? store_protocols+0x1c3/0x286 [rc_core]
[   15.015048]  [<ffffffff81326e4e>] ? dev_attr_store+0x20/0x22
[   15.015048]  [<ffffffff8119d4cc>] ? sysfs_write_file+0x108/0x144
...

The original report that led to the investigation was the following:

[ 1679.457305] INFO: task LCDd:8460 blocked for more than 120 seconds.
[ 1679.457307] "echo 0 > /proc/sys/kernel/hung_task_timeout_secs" disables this message.
[ 1679.457309] LCDd            D ffff88010fcd89c8     0  8460      1 0x00000000
[ 1679.457312]  ffff8800d5a03b48 0000000000000082 0000000000000000 ffff8800d5a03fd8
[ 1679.457314]  00000000012dcd30 fffffffffffffffd ffff8800d5a03fd8 ffff88010fcd86f0
[ 1679.457316]  ffff8800d5a03fd8 ffff8800d5a03fd8 ffff88010fcd89d0 ffff8800d5a03fd8
[ 1679.457319] Call Trace:
[ 1679.457324]  [<ffffffff810ff1a5>] ? zone_statistics+0x75/0x90
[ 1679.457327]  [<ffffffff810ea907>] ? get_page_from_freelist+0x3c7/0x820
[ 1679.457330]  [<ffffffff813b0a49>] __mutex_lock_slowpath+0x139/0x320
[ 1679.457335]  [<ffffffff813b0c41>] mutex_lock+0x11/0x30
[ 1679.457338]  [<ffffffffa0d54216>] display_open+0x66/0x130 [imon]
[ 1679.457345]  [<ffffffffa01d06c0>] usb_open+0x180/0x310 [usbcore]
[ 1679.457349]  [<ffffffff81143b3b>] chrdev_open+0x1bb/0x2d0
[ 1679.457350]  [<ffffffff8113d93d>] __dentry_open+0x10d/0x370
[ 1679.457352]  [<ffffffff81143980>] ? chrdev_open+0x0/0x2d0
...

Bump the driver version here so its easier to tell if people have this
locking fix or not, and also make locking during probe easier to follow.

CC: stable@kernel.org
Reported-by: NBenjamin Hodgetts <ben@xnode.org>
Signed-off-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add device ID for a Dell-branded, Philips device ID transceiver reported
by an OpenELEC user on their forums.

http://openelec.tv/forum/27-hardware-support/5622-adding-support-for-an-ir-receiver--dell-branded--#5622Signed-off-by: NJarod Wilson <jarod@redhat.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

These changes were incorrectly fixed by codespell. They were now
manually corrected.
Signed-off-by: NLucas De Marchi <lucas.demarchi@profusion.mobi>

q->memory entry is initialized to late, so if allocation of memory buffers
fails, the buffers might not be freed correctly (q->memory is tested in
__vb2_free_mem, which can be called before setting q->memory).
Reported-by: NKamil Debski <k.debski@samsung.com>
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
CC: Pawel Osciak <pawel@osciak.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Videobuf2 core assumes that driver doesn't set any buffer flags.
This is correct for buffer state flags that videobuf2 manages,
but the other flags like V4L2_BUF_FLAG_{KEY,P,B}FRAME,
V4L2_BUF_FLAG_TIMECODE and V4L2_BUF_FLAG_INPUT should be passed from or to
the driver.
Reported-by: NJonghun Han <jonghun.han@samsung.com>
Signed-off-by: NMarek Szyprowski <m.szyprowski@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
CC: Pawel Osciak <pawel@osciak.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add support for buffer timestamps and the sequence number in
the video capture driver.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Make sure the sizeimage for 3-planar color formats is
width * height * 3/2 and the bytesperline is same for each
plane in case of a multi-planar format.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Protecting the color format with vb2_is_streaming() is not sufficient
as this prevents changing the format only after VIDIOC_STREAMON.
To prevent the color format reconfiguration as soon as buffers
are allocated use vb2_is_busy() instead.
Also make the videobuf queue ops structure static.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Correct pixel limits for the fourth FIMC entity on Exynos4 SoCs.
FIMC3 only supports the writeback input from the LCD mixer.
Also rename s5pv310 variant to exynos4 which is needed after
renaming s5pv310 series to Exynos4.
Signed-off-by: NSylwester Nawrocki <s.nawrocki@samsung.com>
Signed-off-by: NKyungmin Park <kyungmin.park@samsung.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

This reverts commit 35d9f510.

Quoth Jiri Slaby:
 "It fixes mmap when IOMMU is used on x86 only, but breaks architectures
  like ARM or PPC where virt_to_phys(dma_alloc_coherent) doesn't work.
  We need there dma_mmap_coherent or similar (the trickery what
  snd_pcm_default_mmap does but in some saner way).  But this cannot be
  done at this phase."
Requested-by: NJiri Slaby <jslaby@suse.cz>
Cc: Russell King - ARM Linux <linux@arm.linux.org.uk>
Cc: Janusz Krzysztofik <jkrzyszt@tis.icnet.pl>
Acked-by: NMauro Carvalho Chehab <mchehab@redhat.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Cc: Stefan Sibiga <stefansibiga@yahoo.ca>
Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Cc: Stefan Sibiga <stefansibiga@yahoo.ca>
Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

R_MPD bit 3 does not depend on analog vs. digital. Just use
(0x7f & pd) directly from the values in the main pll table.

Thanks to Stefan Sibiga for pointing this out.

Cc: Stefan Sibiga <stefansibiga@yahoo.ca>
Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Fix type of prog_cal and prog_tab variables to avoid any possible
calculation errors.
Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Misplaced parenthesis cause a calculation bug in
tda18271_rf_tracking_filters_init

Thanks to Stefan Sibiga for pointing this out.

Cc: Stefan Sibiga <stefansibiga@yahoo.ca>
Signed-off-by: NMichael Krufky <mkrufky@kernellabs.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

get_user_pages() can return a negative error code when it fails. Set
buf->npages to 0 in that case, to prevent isp_video_buffer_cleanup()
from releasing invalid pages.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Subdevs already have their own entity, don't register as second one when
registering the subdev device node.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Acked-by: NSakari Ailus <sakari.ailus@maxwell.research.nokia.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

When open a device node, all entities part of the same pipeline are
powered on. If one of the entities fails to be powered on, the open
operations fails. In that case the device node entity use count must not
be incremented.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

To use the lane shifter, set different pixel formats at each end of
the link at the CCDC input.
Signed-off-by: NMichael Jones <michael.jones@matrix-vision.de>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Add support for 8-bit bayer and 10- and 12-bit grey formats at the CCDC
input. Y12 is truncated to Y10 at the CCDC output.
Signed-off-by: NMichael Jones <michael.jones@matrix-vision.de>
Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Use isp defines for isp xclk selection in isp_set_xclk().
Signed-off-by: NStanimir Varbanov <svarbanov@mm-sol.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

When a failure to stop a module in the pipeline is detected, the only
way to recover is to reset the ISP. However, as other users can be using
a different pipeline with other modules, the ISP can't be reset
synchronously with the error detection.

Mark the ISP as needing a reset when a failure to stop a pipeline is
detected, and reset the ISP when the last user releases the last
reference to the ISP.

Modify the omap3isp_pipeline_set_stream() function to record the new ISP
pipeline state only when no error occurs, except when stopping the
pipeline in which case the pipeline is still marked as stopped.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

struct ispstat_generic_config's comments refers to isph3a_aewb_config,
isph3a_af_config and isphist_config. But those structs have had their
names prefixed with 'omap3'. So, let's update the comments.
Signed-off-by: NDavid Cohen <david.cohen@nokia.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

The link flags were not properly handled in __media_entity_setup_link
which could lead to link_notify callback to be called when the flags are
not modified. Fix this.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

It doesn't get more trivial than these.
Signed-off-by: NMichael Jones <michael.jones@matrix-vision.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Round properly the rsz factor so that we get highest rsz so that the input
width (or height) is highest possible smaller or equal to what the user
asks.
Signed-off-by: NSakari Ailus <sakari.ailus@maxwell.research.nokia.com>
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

As the number of phases/taps, used to select the correct equations to
compute the ratio, depends on the ratio, start with the 7-tap mode
equations to compute an approximation of the ratio, and switch to the
4-tap mode equations if the approximation is lower than or equal to 512.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

When the crop rectangle needs to be modified to match hardware
requirements, center the resulting rectangle on the requested rectangle
instead of removing pixels from the right and bottom sides only.
Signed-off-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Since commit

	379fa5d3 ([media] V4L: mx3_camera: convert to videobuf2)

mx3_camera uses videobuf2, but that commit didn't upgrade the select
resulting in the following build failure:

	drivers/built-in.o: In function `mx3_camera_init_videobuf':
	clkdev.c:(.text+0x86580): undefined reference to `vb2_dma_contig_memops'
	drivers/built-in.o: In function `mx3_camera_probe':
	clkdev.c:(.devinit.text+0x3548): undefined reference to `vb2_dma_contig_init_ctx'
	clkdev.c:(.devinit.text+0x3578): undefined reference to `vb2_dma_contig_cleanup_ctx'
	drivers/built-in.o: In function `mx3_camera_remove':
	clkdev.c:(.devexit.text+0x674): undefined reference to `vb2_dma_contig_cleanup_ctx'
	make[2]: *** [.tmp_vmlinux1] Error 1
	make[1]: *** [sub-make] Error 2
	make: *** [all] Error 2
Signed-off-by: NUwe Kleine-König <u.kleine-koenig@pengutronix.de>
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

If the camera host driver (sh_mobile_ceu_camera.c) is unloaded and then
reloaded, probe will fail, because camera client .set_bus_param() and
.query_bus_param() methods have been set to NULL. Fix this by caching
the original pointers and restoring them on driver-unbind.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

i2c_unregister_device() frees the I2C client, so, dereferencing it
afterwards is a bug, that leads to Oopses.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>

With the introduction of CSI2 support on sh-mobile, the host driver
switched to using v4l2_device_call_until_err() with grp_id == 0 to
call subdev operations on the sensor and the CSI2 subdev. However,
this has broken multi-client set ups like the one on migor, because
that way all operations get called on both clients. To fix this add
a grp_id and set it to the client private context.
Signed-off-by: NGuennadi Liakhovetski <g.liakhovetski@gmx.de>
Signed-off-by: NMauro Carvalho Chehab <mchehab@redhat.com>