This is the x86 implementation of the crashkernel option.  It reserves a
window of memory very early in the bootup process, so we never use it for
anything but the kernel to switch to when the running kernel panics.

In addition to reserving this memory a resource structure is registered so
looking at /proc/iomem it is clear what happened to that memory.

ISSUES:
Is it possible to implement this in a architecture generic way?
What should be done with architectures that always use an iommu and
thus don't report their RAM memory resources in /proc/iomem?
Signed-off-by: NEric Biederman <ebiederm@xmission.com>
Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

In the case of a crash/panic an architecture specific function
machine_crash_shutdown is called.  This patch adds to the x86 machine_crash
function the standard kernel code for shutting down apics.

Every line of code added to that function increases the risk that we will call
code after a kernel panic that is not safe.

This patch should not make it to the stable kernel without a being reviewed a
lot more.  It is unclear how much a hardned kernel can take when it comes to
misconfigured apics.  So since a normal kernel has problems this patch does a
clean shutdown.

It is my expectation this patch will be dropped from future generations of the
kexec work.  But for the moment it is a crutch to keep from breaking
everything.
Signed-off-by: NEric Biederman <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

After the kernel panics if we wish to generate an entire machine core file it
is very nice to know the register state at the time the machine crashed.

After long discussion it was realized that if you are going to be saving the
information anyway it is reasonable to store the information in a format that
it will be used and recognized in so the register state is stored in the
standard ELF note format.
Signed-off-by: NEric Biederman <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

One of the dangers when switching from one kernel to another is what happens
to all of the other cpus that were running in the crashed kernel.  In an
attempt to avoid that problem this patch adds a nmi handler and attempts to
shoot down the other cpus by sending them non maskable interrupts.

The code then waits for 1 second or until all known cpus have stopped running
and then jumps from the running kernel that has crashed to the kernel in
reserved memory.

The kernel spin loop is used for the delay as that should behave continue to
be safe even in after a crash.
Signed-off-by: NEric Biederman <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This is the i386 implementation of kexec.
Signed-off-by: NEric Biederman <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Factor out the apic and smp shutdown code from machine_restart so it can be
called by in the kexec reboot path as well.

By switching to the bootstrap cpu by default on reboot I can delete/simplify
some motherboard fixups well.
Signed-off-by: NEric Biederman <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

For one kernel to report a crash another kernel has created we need
to have 2 kernels loaded simultaneously in memory.  To accomplish this
the two kernels need to built to run at different physical addresses.

This patch adds the CONFIG_PHYSICAL_START option to the x86_64 kernel
so we can do just that.  You need to know what you are doing and
the ramifications are before changing this value, and most users
won't care so I have made it depend on CONFIG_EMBEDDED

bzImage kernels will work and run at a different address when compiled
with this option but they will still load at 1MB.  If you need a kernel
loaded at a different address as well you need to boot a vmlinux.
Signed-off-by: NEric Biederman <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch fixes a problem with reserving memory during boot up of a kernel
built for non-default location.  Currently boot memory allocator reserves
the memory required by kernel image, boot allocaotor bitmap etc.  It
assumes that kernel is loaded at 1MB (HIGH_MEMORY hard coded to 1024*1024).
 But kernel can be built for non-default locatoin, hence existing
hardcoding will lead to reserving unnecessary memory.  This patch fixes it.
Signed-off-by: NVivek Goyal <vgoyal@in.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

For one kernel to report a crash another kernel has created we need
to have 2 kernels loaded simultaneously in memory.  To accomplish this
the two kernels need to built to run at different physical addresses.

This patch adds the CONFIG_PHYSICAL_START option to the x86 kernel
so we can do just that.  You need to know what you are doing and
the ramifications are before changing this value, and most users
won't care so I have made it depend on CONFIG_EMBEDDED

bzImage kernels will work and run at a different address when compiled
with this option but they will still load at 1MB.  If you need a kernel
loaded at a different address as well you need to boot a vmlinux.
Signed-off-by: NEric Biederman <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The vmlinux on x86_64 does not report the correct physical address of
the kernel.  Instead in the physical address field it currently
reports the virtual address of the kernel.

This is patch is a bug fix that corrects vmlinux to report the
proper physical addresses.

This is potentially a help for crash dump analysis tools.

This definitiely allows bootloaders that load vmlinux as a standard
ELF executable.  Bootloaders directly loading vmlinux become of
practical importance when we consider the kexec on panic case.
Signed-off-by: NEric Biederman <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

The vmlinux on i386 does not report the correct physical address of
the kernel.  Instead in the physical address field it currently
reports the virtual address of the kernel.

This is patch is a bug fix that corrects vmlinux to report the
proper physical addresses.

This is potentially a help for crash dump analysis tools.

This definitiely allows bootloaders that load vmlinux as a standard
ELF executable.  Bootloaders directly loading vmlinux become of
practical importance when we consider the kexec on panic case.
Signed-off-by: NEric Biederman <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When coming out of apic mode attempt to set the appropriate
apic back into virtual wire mode.  This improves on previous versions
of this patch by by never setting bot the local apic and the ioapic
into veritual wire mode.

This code looks at data from the mptable to see if an ioapic has
an ExtInt input to make this decision.  A future improvement
is to figure out which apic or ioapic was in virtual wire mode
at boot time and to remember it.  That is potentially a more accurate
method, of selecting which apic to place in virutal wire mode.
Signed-off-by: NEric Biederman <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

When coming out of apic mode attempt to set the appropriate
apic back into virtual wire mode.  This improves on previous versions
of this patch by by never setting bot the local apic and the ioapic
into veritual wire mode.

This code looks at data from the mptable to see if an ioapic has
an ExtInt input to make this decision.  A future improvement
is to figure out which apic or ioapic was in virtual wire mode
at boot time and to remember it.  That is potentially a more accurate
method, of selecting which apic to place in virutal wire mode.
Signed-off-by: NEric Biederman <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

From: Eric W. Biederman <ebiederm@xmission.com

The following patch simply adds a shutdown method to the x86_64 i8259 code.
Signed-off-by: NEric Biederman <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

From: Eric W. Biederman <ebiederm@xmission.com>

This patch disables interrupt generation from the legacy pic on reboot.  Now
that there is a sys_device class it should not be called while drivers are
still using interrupts.

There is a report about this breaking ACPI power off on some systems.
http://bugme.osdl.org/show_bug.cgi?id=4041
However the final comment seems to exonerate this code.  So until
I get more information I believe that was a false positive.
Signed-off-by: NEric Biederman <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

From: Eric W. Biederman <ebiederm@xmission.com>

It is ok to reserve resources > 4G on x86_64 struct resource is 64bit now :)
Signed-off-by: NEric Biederman <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

From: "Maciej W. Rozycki" <macro@linux-mips.org>

Fix a kexec problem whcih causes local APIC detection failure.

The problem is detect_init_APIC() is called early, before the command line
have been processed.  Therefore "lapic" (and "nolapic") have not been seen,
yet.
Signed-off-by: NMaciej W. Rozycki <macro@linux-mips.org>
Signed-off-by: NEric Biederman <ebiederm@xmission.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch consolidates the CONFIG_PREEMPT and CONFIG_PREEMPT_BKL
preemption options into kernel/Kconfig.preempt.  This, besides reducing
source-code, also enables more centralized tweaking of preemption related
options.
Signed-off-by: NIngo Molnar <mingo@elte.hu>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

ia64 changes similar to kernel/sched.c.
Signed-off-by: NDinakar Guniguntala <dino@in.ibm.com>
Acked-by: NPaul Jackson <pj@sgi.com>
Acked-by: NNick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Do some basic initial tuning.
Signed-off-by: NNick Piggin <nickpiggin@yahoo.com.au>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

2.6.12-rc6-mm1 has a few remaining synchronize_kernel()s, some (but not
all) in comments.  This patch changes these synchronize_kernel() calls (and
comments) to synchronize_rcu() or synchronize_sched() as follows:

- arch/x86_64/kernel/mce.c mce_read(): change to synchronize_sched() to
  handle races with machine-check exceptions (synchronize_rcu() would not cut
  it given RCU implementations intended for hardcore realtime use.

- drivers/input/serio/i8042.c i8042_stop(): change to synchronize_sched() to
  handle races with i8042_interrupt() interrupt handler.  Again,
  synchronize_rcu() would not cut it given RCU implementations intended for
  hardcore realtime use.

- include/*/kdebug.h comments: change to synchronize_sched() to handle races
  with NMIs.  As before, synchronize_rcu() would not cut it...

- include/linux/list.h comment: change to synchronize_rcu(), since this
  comment is for list_del_rcu().

- security/keys/key.c unregister_key_type(): change to synchronize_rcu(),
  since this is interacting with RCU read side.

- security/keys/process_keys.c install_session_keyring(): change to
  synchronize_rcu(), since this is interacting with RCU read side.
Signed-off-by: N"Paul E. McKenney" <paulmck@us.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch changes the memory allocation method for the s390 debug feature.
Trace buffers had been allocated using the get_free_pages() function before.
Therefore it was not possible to get big memory areas in a running system due
to memory fragmentation.  Now the trace buffers are subdivided into several
subbuffers with pagesize.  Therefore it is now possible to allocate more
memory for the trace buffers and more trace records can be written.

In addition to that, dynamic specification of the size of the trace buffers is
implemented.  It is now possible to change the size of a trace buffer using a
new debugfs file instance.  When writing a number into this file, the trace
buffer size is changed to 'number * pagesize'.

In the past all the traces could be obtained from userspace by accessing files
in the "proc" filesystem.  Now with debugfs we have a new filesystem which
should be used for debugging purposes.  This patch moves the debug feature
from procfs to debugfs.

Since the interface of debug_register() changed, all device drivers, which use
the debug feature had to be adjusted.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Add interface to issue VM control program commands.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Improved machine check handling.  Kernel is now able to receive machine checks
while in kernel mode (system call, interrupt and program check handling).
Also register validation is now performed.
Signed-off-by: NMartin Schwidefsky <schwidefsky@de.ibm.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Clean up the hot-unplugging code.  There is now an id procedure which is
called to figure out what device we're talking to.  The error messages from
that are now done from mconsole_remove instead of the driver.  remove is now
called with the device number, after it has been checked, so doesn't need to
do sanity checking on it.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

user_time_init_skas and user_time_init_tt were essentially the same.  So, this
merges them, deleting the mode-specific functions and declarations.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

kmalloc wasn't being disabled during panic.  This patch ensures that, no
matter how UML is exiting, it is disabled.  This matters because part of the
cleanup is to remove the umid file, which involves readdir, which calls
malloc.  This must map to libc malloc, rather than kmalloc or vmalloc.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

In skas mode, the call to uml_idle_timer permanently shut off the virtual
timer, resulting in no timer ticks to anything but the idle thread.  This is
likely the cause of the soft lockups that are seen sporadically in recent
UMLs.
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Fix the do_fork calling convention: normal arch pass the regs and the new sp
value to do_fork instead of NULL.

Currently the arch-independent code ignores these values, while the UML code
(actually it's copy_thread) gets the right values by itself.

With this patch, things are fixed up.
Signed-off-by: NPaolo 'Blaisorblade' Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Here's a small patch to remove a few unnessesary NULL pointer checks before
kfree() in arch/um/drivers/daemon_user.c
Signed-off-by: NJesper Juhl <juhl-lkml@dif.dk>
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Size of pointer doesn't seem right, but maybe my solution isn't either
(sig_size maybe?).
Signed-off-by: NDomen Puncer <domen@coderock.org>
Signed-off-by: NJeff Dike <jdike@addtoit.com>
Cc: Paolo Giarrusso <blaisorblade@yahoo.it>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch fixes register saving so that each register is only saved once,
and adds missing saving of %cr8 on x86-64.  Some reordering so that
save/restore is more logical/safer (segment registers should be restored
after gdt).
Signed-off-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Sleep code uses wrong version of lgdt, that does the wrong thing when
gdt is beyond 16MB or so.
Signed-off-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

CONFIG_PM_DISK is long gone, but it still managed to survived at few
places.
Signed-off-by: NPavel Machek <pavel@suse.cz>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Using CPU hotplug to support suspend/resume SMP.  Both S3 and S4 use
disable/enable_nonboot_cpus API.  The S4 part is based on Pavel's original S4
SMP patch.

Signed-off-by: Li Shaohua<shaohua.li@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Dead CPU notifies online CPU that it's dead using cpu_state variable.
After switching to physical cpu hotplug, we forgot setting the variable.
This patch fixes it.  Currently only __cpu_die uses it.  We changed other
locations for consistency in case others use it.
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Acked-by: NAshok Raj <ashok.raj@intel.com>
Cc: "Luck, Tony" <tony.luck@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch provides an option to switch broadcast or use mask version for
sending IPI's.  If CONFIG_HOTPLUG_CPU is defined, we choose not to use
broadcast shortcuts by default, otherwise we choose broadcast mode as default.

both cases, one can change this via startup cmd line option, to choose
no-broadcast mode.

	no_ipi_broadcast=1

This is provided on request from Andi Kleen, since he doesnt agree with
replacing IPI shortcuts as a solution for CPU hotplug.  Without removing
broadcast IPI's, it would mean lots of new code for __cpu_up() path, which
would acheive the same results.
Signed-off-by: NAshok Raj <ashok.raj@intel.com>
Acked-by: NAndi Kleen <ak@muc.de>
Acked-by: NZwane Mwaikambo <zwane@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

Broadcast IPI's provide un-expected behaviour for cpu hotplug.  CPU's in
offline state also end up receiving the IPI.  Once the cpus become online they
receive these stale IPI's which are bad and introduce unexpected behaviour.

This is easily avoided by not sending a broadcast and addressing just the
CPU's in online map.  Doing prelim cycle counts it appears there is no big
overhead and numbers seem around 0x3000-0x3900 on an average on x86 and x86_64
systems with CPUS running 3G, both for broadcast and mask version of the
API's.

The shortcuts are useful only for flat mode (where the perf shows no
degradation), and in cluster mode, its unicast anyway.  Its simpler to just
not use broadcast anymore.
Signed-off-by: NAshok Raj <ashok.raj@intel.com>
Acked-by: NAndi Kleen <ak@muc.de>
Acked-by: NZwane Mwaikambo <zwane@arm.linux.org.uk>
Signed-off-by: NShaohua Li <shaohua.li@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

This patch is a minor cleanup to the cpu sibling/core map.  It is required
that this setup happens on a per-cpu bringup time.
Signed-off-by: NAshok Raj <ashok.raj@intel.com>
Acked-by: NAndi Kleen <ak@muc.de>
Acked-by: NZwane Mwaikambo <zwane@arm.linux.org.uk>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>

  Experimental CPU hotplug patch for x86_64
  -----------------------------------------
This supports logical CPU online and offline.
- Test with maxcpus=1, and then kick other cpu's off to test if init code
  is all cleaned up. CONFIG_SCHED_SMT works as well.
- idle threads are forked on demand from keventd threads for clean startup

TBD:
1. Not tested on a real NUMA machine (tested with numa=fake=2)
2. Handle ACPI pieces for physical hotplug support.
Signed-off-by: NAshok Raj <ashok.raj@intel.com>
Acked-by: NAndi Kleen <ak@muc.de>
Acked-by: NZwane Mwaikambo <zwane@arm.linux.org.uk>
Signed-off-by: Shaohua.li<shaohua.li@intel.com>
Signed-off-by: NAndrew Morton <akpm@osdl.org>
Signed-off-by: NLinus Torvalds <torvalds@osdl.org>