- 23 7月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
The commit 099db17e introduced a regression at suspend/resume where the GPIO1 bit isn't properly restored, thus the speaker output gets muted initially after resume. The fix is simple, use the cached write for storing GPIO data. Reference: Novell bnc#522764 https://bugzilla.novell.com/show_bug.cgi?id=522764Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 03 7月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
HP laptops with AD1984A codecs (at least mobile models) need to set GPIO1 appropriately to indicate the mute state. The BIOS checks this bit to judge whether the mute on or off is sent via F8 key. Without changing this bit, the BIOS can be confused and may toggle the mute wrongly. Reference: Novell bnc#515266 https://bugzilla.novell.com/show_bug.cgi?id=515266Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 02 7月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Added a quirk model=laptop for HP 6930p (103c:30dc) with AD1984A codec. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 24 6月, 2009 3 次提交
-
-
由 Takashi Iwai 提交于
Samsung P50 requires the HP auto-muting unlike other Samsung models. Added a new model=samsung-p50 to support this. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Add a new flag to ad_spec struct so that the same hack can be used for any other models (if any). This also allows other models to reuse the auto-mute functions. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Split mixer element arrays of AD1986A models to several pieces so that each model can share the same mixer arrays. This removes lots of duplicated data. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 23 4月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
The current ad1884a-mobile model has a problem that the speaker output doesn't work sometimes after boot or power-saving on some HP laptops. It seems that the verbs accessing to the non-functional widgets cause this problem. This patch simplifies the init verbs for mobile model not to touch unnecessary setups so that it avoids the speaker-mute problem. Reference: Novell bnc#495668 https://bugzilla.novell.com/show_bug.cgi?id=495668Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 16 4月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Add the upper-limit of mixer amp for AD1884A-laptop model just like the mobile model for some HP laptops. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 07 4月, 2009 1 次提交
-
-
由 Akinobu Mita 提交于
Signed-off-by: NAkinobu Mita <akinobu.mita@gmail.com> Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 26 2月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Use SND_PCI_QUIRK_MASK() to clean up / support better HP laptops with AD1984A codec. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 23 2月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Set the upper limit 0dB to the volume of mixer amp 0x20 for AD1984A HP laptops. The overloaded volume may damage the internal speaker. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 20 2月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Replace the accessor to pin defaults with the common code for caching. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 16 2月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Clean up quirks for HP laptops with AD1984A using SND_PCI_QUIRK_MASK() Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 13 2月, 2009 2 次提交
-
-
由 Takashi Iwai 提交于
Added the helper function snd_hda_multi_out_dig_cleanup() to clean up the digital outputs with multi setup. This call is needed in cases the codec supports multiple digital outputs as slaves. Otherwise the slave widgets aren't properly cleaned up. For a single digital output (e.g. in patch_conexant.c), this call isn't needed. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Added the missing terminator for ad1989b_slave_dig_outs[]. Cc: <stable@kernel.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 12 2月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Detect multiple digital-out pins in snd_hda_parse_pin_defconfig(). The dig_out_pin and dig_out_type fields become arrays. The codec parser still doesn't use this multiple pins detection, though. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 10 2月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Clean up quirk lists with bit masks. Also, sorted in numerical order for alc662_cfg_tbl[]. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 07 2月, 2009 1 次提交
-
-
由 Takashi Iwai 提交于
Use digital beep instead of analog pc-beep for AD codecs. Create the beep mixer controls dynamically on demand. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 05 2月, 2009 2 次提交
-
-
由 Takashi Iwai 提交于
Add model=laptop entry for another HP laptop (103c:3077) with AD1984A. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Added model=laptop for another HP laptop (103c:3072) with AD1984A codec. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 23 1月, 2009 4 次提交
-
-
由 Takashi Iwai 提交于
The docking mic-boost (0x25) has no mute bit. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The mic-boosts (0x14 and 0x15) on AD1884* codecs are input-amps, not output-amps. Fix the invalid initialization verbs. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The ADC widgets on AD1988* codecs have no amp controls. Remove invalid initialization verbs. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
The mic boosts (NID 0x08 and 0x18) are input-amps, not output-amps. Fix the initial verbs for them. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 07 1月, 2009 2 次提交
-
-
由 Clemens Fruhwirth 提交于
Fixed typos of codec-id checks for AD1882/AD1882A. Cc: stable@kernel.org Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
由 Takashi Iwai 提交于
Added a quirk for HP 2230s, model=laptop, with AD1984A codec. Reference: Novell bnc#461660 https://bugzilla.novell.com/show_bug.cgi?id=461660Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 10 12月, 2008 1 次提交
-
-
由 Takashi Iwai 提交于
Added model=laptop for HP 6730B laptop with AD1984A codec. Reference: Novell bnc#457909 https://bugzilla.novell.com/show_bug.cgi?id=457909Signed-off-by: NTakashi Iwai <tiwai@suse.de> Cc: stable@kernel.org
-
- 27 11月, 2008 1 次提交
-
-
由 Takashi Iwai 提交于
Split the monolithc HD-audio driver into several pieces: - snd-hda-intel HD-audio PCI controller driver; loaded via udev - snd-hda-codec HD-audio codec bus driver - snd-hda-codec-* Specific HD-audio codec drivers When built as modules, snd-hda-codec (that is invoked by snd-hda-intel) looks up the codec vendor ID and loads the corresponding codec module automatically via request_module(). When built in a kernel, each codec drivers are statically hooked up before probing the PCI. This patch adds appropriate EXPORT_SYMBOL_GPL()'s and the module information for each driver, and driver-linking codes between codec-bus and codec drivers. TODO: - Avoid EXPORT_SYMBOL*() when built-in kernel - Restore __devinit appropriately depending on the condition Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 21 11月, 2008 1 次提交
-
-
由 Takashi Iwai 提交于
The changes specific for Samsung laptops seem unapplicable to other hardware models like ASUS. The mic inputs are lost on such hardware by the change 5d5d5f43. This patch adds back the old laptop-eapd model, and create a new model "samsung" for the new one specific to Samsung laptops with automatic mic selection feature. Reference: kernel bugzilla #12070 http://bugzilla.kernel.org/show_bug.cgi?id=12070Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 11 11月, 2008 1 次提交
-
-
由 Travis Place 提交于
Added a QUIRK to patch_analog.c for the HP Elitebook 8530p (IDs 0x103c:0x30e7) to use AD1884A model 'laptop' by default. Playback and Capture confirmed working. Signed-off-by: NTravis Place <wishie@wishie.net> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 09 11月, 2008 1 次提交
-
-
由 Michel Marti 提交于
Added model=laptop for another HP machine (103c:3614) with AD1884A codec. Signed-off-by: NMichel Marti <mma@objectxp.com> Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 28 10月, 2008 1 次提交
-
-
由 Takashi Iwai 提交于
Added a quirk entry for another HP mobile device with AD1884A codec. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 13 10月, 2008 1 次提交
-
-
由 Takashi Iwai 提交于
Use generic array helpers to simplify array handling in snd-hda-intel. Signed-off-by: NTakashi Iwai <tiwai@suse.de>
-
- 23 9月, 2008 3 次提交
-
-
由 Robin H. Johnson 提交于
Use 6STACK_DIG for the AD2000BX variant of the AD1989B chip used by Asus on their Asus P5Q Premium and Pro boards. Signed-off-by: NRobin H. Johnson <robbat2@gentoo.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Robin H. Johnson 提交于
Implement the slave_dig_outs for AD1989 cards. Untested due to lack of hardware. Signed-off-by: NRobin H. Johnson <robbat2@gentoo.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
由 Robin H. Johnson 提交于
The SPDIF pins for AD1989 are not enabled by default. Set OUT bit so that they actually work. Also initialize the HDMI SPDIF at the same time. Signed-off-by: NRobin H. Johnson <robbat2@gentoo.org> Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 25 8月, 2008 1 次提交
-
-
由 Takashi Iwai 提交于
Added the basic support of AD1882A codec chip. It's almost compatible with AD1882, but with a digital mic and some differences in connections. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 13 8月, 2008 1 次提交
-
-
由 Takashi Iwai 提交于
The widget node 0x21 should be initialized as unmuted/full (0dB) as default. This will reduce additional manual work by user at the first time use. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 10 7月, 2008 1 次提交
-
-
由 Takashi Iwai 提交于
Added the missing SSID of Thinkpad Z60m for model=thinkpad with AD1981HD. Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-
- 18 6月, 2008 1 次提交
-
-
由 Takashi Iwai 提交于
Don't create mixer volume elements for Headphone and Speaker if they use the same DAC as normal line-outs on AD1988. Otherwise the amp value gets screwed up, e.g. https://bugzilla.novell.com/show_bug.cgi?id=398255Signed-off-by: NTakashi Iwai <tiwai@suse.de> Signed-off-by: NJaroslav Kysela <perex@perex.cz>
-