Ths simplifies flow-table-destroy API. No need to pass explicit
parameter about context.
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>
Acked-by: NThomas Graf <tgraf@redhat.com>

Allow datapath to recognize and extract MPLS labels into flow keys
and execute actions which push, pop, and set labels on packets.

Based heavily on work by Leo Alterman, Ravi K, Isaku Yamahata and Joe Stringer.

Cc: Ravi K <rkerur@gmail.com>
Cc: Leo Alterman <lalterman@nicira.com>
Cc: Isaku Yamahata <yamahata@valinux.co.jp>
Cc: Joe Stringer <joe@wand.net.nz>
Signed-off-by: NSimon Horman <horms@verge.net.au>
Signed-off-by: NJesse Gross <jesse@nicira.com>
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>

ERROR: "lockdep_ovsl_is_held" [net/openvswitch/vport-gre.ko] undefined!
Reported-by: NAlexei Starovoitov <alexei.starovoitov@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The internal and netdev vport remain part of openvswitch.ko. Encap
vports including vxlan, gre, and geneve can be built as separate
modules and are loaded on demand. Modules can be unloaded after use.
Datapath ports keep a reference to the vport module during their
lifetime.

Allows to remove the error prone maintenance of the global list
vport_ops_list.
Signed-off-by: NThomas Graf <tgraf@suug.ch>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

skb_gso_segment has three possible return values:
1. a pointer to the first segmented skb
2. an errno value (IS_ERR())
3. NULL.  This can happen when GSO is used for header verification.

However, several callers currently test IS_ERR instead of IS_ERR_OR_NULL
and would oops when NULL is returned.

Note that these call sites should never actually see such a NULL return
value; all callers mask out the GSO bits in the feature argument.

However, there have been issues with some protocol handlers erronously not
respecting the specified feature mask in some cases.

It is preferable to get 'have to turn off hw offloading, else slow' reports
rather than 'kernel crashes'.
Signed-off-by: NFlorian Westphal <fw@strlen.de>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The Openvswitch implementation is completely agnostic to the options
that are in use and can handle newly defined options without
further work. It does this by simply matching on a byte array
of options and allowing userspace to setup flows on this array.
Signed-off-by: NJesse Gross <jesse@nicira.com>
Singed-off-by: NAnsis Atteka <aatteka@nicira.com>
Signed-off-by: NAndy Zhou <azhou@nicira.com>
Acked-by: NThomas Graf <tgraf@noironetworks.com>
Acked-by: NPravin B Shelar <pshelar@nicira.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

As the size of the flow key grows, it can put some pressure on the
stack. This is particularly true in ovs_flow_cmd_set(), which needs several
copies of the key on the stack. One of those uses is logically separate,
so this factors it out to reduce stack pressure and improve readibility.
Signed-off-by: NJesse Gross <jesse@nicira.com>
Signed-off-by: NAndy Zhou <azhou@nicira.com>
Acked-by: NPravin B Shelar <pshelar@nicira.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Some tunnel formats have mechanisms for indicating that packets are
OAM frames that should be handled specially (either as high priority or
not forwarded beyond an endpoint). This provides support for allowing
those types of packets to be matched.
Signed-off-by: NJesse Gross <jesse@nicira.com>
Signed-off-by: NAndy Zhou <azhou@nicira.com>
Acked-by: NPravin B Shelar <pshelar@nicira.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Since commit fb5d1e9e ("openvswitch: Build flow cmd netlink reply only if needed."),
the new flows are not notified to the listeners of OVS_FLOW_MCGROUP.

This commit fixes the problem by using the genl function, ie
genl_has_listerners() instead of netlink_has_listeners().
Signed-off-by: NSamuel Gauthier <samuel.gauthier@6wind.com>
Signed-off-by: NNicolas Dichtel <nicolas.dichtel@6wind.com>
Acked-by: NPravin B Shelar <pshelar@nicira.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Recirc action allows a packet to reenter openvswitch processing.
currently openvswitch lookup flow for packet received and execute
set of actions on that packet, with help of recirc action we can
process/modify the packet and recirculate it back in openvswitch
for another pass.

OVS hash action calculates 5-tupple hash and set hash in flow-key
hash. This can be used along with recirculation for distributing
packets among different ports for bond devices.
For example:
OVS bonding can use following actions:
Match on: bond flow; Action: hash, recirc(id)
Match on: recirc-id == id and hash lower bits == a;
          Action: output port_bond_a
Signed-off-by: NAndy Zhou <azhou@nicira.com>
Acked-by: NJesse Gross <jesse@nicira.com>
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>

Currently tun_key is used for passing tunnel information
on ingress and egress path, this cause confusion.  Following
patch removes its use on ingress path make it egress only parameter.
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>
Acked-by: NAndy Zhou <azhou@nicira.com>

OVS flow extract is called on packet receive or packet
execute code path.  Following patch defines separate API
for extracting flow-key in packet execute code path.
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>
Acked-by: NAndy Zhou <azhou@nicira.com>

OVS keeps pointer to packet key in skb->cb, but the packet key is
store on stack. This could make code bit tricky. So it is better to
get rid of the pointer.
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>

distinguish between the dropped and consumed skb, not assume the skb
is consumed always

Cc: Thomas Graf <tgraf@noironetworks.com>
Cc: Pravin Shelar <pshelar@nicira.com>
Signed-off-by: NLi RongQing <roy.qing.li@gmail.com>
Acked-by: NPravin B Shelar <pshelar@nicira.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The user_skb maybe be leaked if the operation on it failed and codes
skipped into the label "out:" without calling genlmsg_unicast.

Cc: Pravin Shelar <pshelar@nicira.com>
Signed-off-by: NLi RongQing <roy.qing.li@gmail.com>
Acked-by: NPravin B Shelar <pshelar@nicira.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

The #include headers net/genetlink.h and linux/genetlink.h both were
included twice, so delete each of the duplicate.
Signed-off-by: NJean Sacren <sakiwit@gmail.com>
Cc: Pravin Shelar <pshelar@nicira.com>
Cc: dev@openvswitch.org
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This patch introduces the use of the macro IS_ERR_OR_NULL in place of
tests for NULL and IS_ERR.

The following Coccinelle semantic patch was used for making the change:

@@
expression e;
@@

- e == NULL || IS_ERR(e)
+ IS_ERR_OR_NULL(e)
 || ...
Signed-off-by: NHimangi Saraogi <himangi774@gmail.com>
Acked-by: NJulia Lawall <julia.lawall@lip6.fr>
Acked-by: NPravin B Shelar <pshelar@nicira.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

In queue_userspace_packet(), the ovs_nla_put_flow return value is
not checked. This is fine as long as key_attr_size() returns the
correct value. In case it does not, the current code may corrupt buffer
memory. Add a run time assertion catch this case to avoid silent
failure.
Reported-by: NBen Pfaff <blp@nicira.com>
Signed-off-by: NAndy Zhou <azhou@nicira.com>
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>

In order to allow handlers directly read upcalls from datapath,
we need to support per-handler netlink socket for each vport in
datapath.  This commit makes this happen.  Also, it is guaranteed
to be backward compatible with previous branch.
Signed-off-by: NAlex Wang <alexw@nicira.com>
Acked-by: NThomas Graf <tgraf@redhat.com>
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>

Generic netlink tables can be const.
Signed-off-by: NStephen Hemminger <stephen@networkplumber.org>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

This stub now allows userspace to see IFLA_INFO_KIND for ovs master and
IFLA_INFO_SLAVE_KIND for slave.
Signed-off-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Due to the race condition in userspace, there is chance that two
overlapping megaflows could be installed in datapath.  And this
causes userspace unable to delete the less inclusive megaflow flow
even after it timeout, since the flow_del logic will stop at the
first match of masked flow.

This commit fixes the bug by making the kernel flow_del and flow_get
logic check all masks in that case.

Introduced by 03f0d916 (openvswitch: Mega flow implementation).
Signed-off-by: NAlex Wang <alexw@nicira.com>
Acked-by: NAndy Zhou <azhou@nicira.com>
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>

Flow statistics need to take into account the TCP flags from the packet
currently being processed (in 'key'), not the TCP flags matched by the
flow found in the kernel flow table (in 'flow').

This bug made the Open vSwitch userspace fin_timeout action have no effect
in many cases.
This bug is introduced by commit 88d73f6c (openvswitch: Use
TCP flags in the flow key for stats.)
Reported-by: NLen Gao <leng@vmware.com>
Signed-off-by: NBen Pfaff <blp@nicira.com>
Acked-by: NJarno Rajahalme <jrajahalme@nicira.com>
Acked-by: NJesse Gross <jesse@nicira.com>
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>

Following patch get rid of struct genl_family_and_ops which is
redundant due to changes to struct genl_family.
Signed-off-by: NKyle Mestery <mestery@noironetworks.com>
Acked-by: NKyle Mestery <mestery@noironetworks.com>
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>

Signed-off-by: NJarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>

Following patch will be easier to reason about with separate
ovs_flow_cmd_new() and ovs_flow_cmd_set() functions.
Signed-off-by: NJarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>

ovs_flow_cmd_del() now allocates reply (if needed) after the flow has
already been removed from the flow table.  If the reply allocation
fails, a netlink error is signaled with netlink_set_err(), as is
already done in ovs_flow_cmd_new_or_set() in the similar situation.
Signed-off-by: NJarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>

Reduce and clarify locking requirements for ovs_flow_cmd_alloc_info(),
ovs_flow_cmd_fill_info() and ovs_flow_cmd_build_info().

A datapath pointer is available only when holding a lock.  Change
ovs_flow_cmd_fill_info() and ovs_flow_cmd_build_info() to take a
dp_ifindex directly, rather than a datapath pointer that is then
(only) used to get the dp_ifindex.  This is useful, since the
dp_ifindex is available even when the datapath pointer is not, both
before and after taking a lock, which makes further critical section
reduction possible.

Make ovs_flow_cmd_alloc_info() take an 'acts' argument instead a
'flow' pointer.  This allows some future patches to do the allocation
before acquiring the flow pointer.

The locking requirements after this patch are:

ovs_flow_cmd_alloc_info(): May be called without locking, must not be
called while holding the RCU read lock (due to memory allocation).
If 'acts' belong to a flow in the flow table, however, then the
caller must hold ovs_mutex.

ovs_flow_cmd_fill_info(): Either ovs_mutex or RCU read lock must be held.

ovs_flow_cmd_build_info(): This calls both of the above, so the caller
must hold ovs_mutex.
Signed-off-by: NJarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>

Move most memory allocations away from the ovs_mutex critical
sections.  vport allocations still happen while the lock is taken, as
changing that would require major refactoring. Also, vports are
created very rarely so it should not matter.

Change ovs_dp_cmd_get() now only takes the rcu_read_lock(), rather
than ovs_lock(), as nothing need to be changed.  This was done by
ovs_vport_cmd_get() already.
Signed-off-by: NJarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>

Use netlink_has_listeners() and NLM_F_ECHO flag to determine if a
reply is needed or not for OVS_FLOW_CMD_NEW, OVS_FLOW_CMD_SET, or
OVS_FLOW_CMD_DEL.  Currently, OVS userspace does not request a reply
for OVS_FLOW_CMD_NEW, but usually does for OVS_FLOW_CMD_DEL, as stats
may have changed.
Signed-off-by: NJarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>

Remove unnecessary locking from functions that are always called with
appropriate locking.
Signed-off-by: NJarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: NThomas Graf <tgraf@redhat.com>
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>

Flow SET can accept an empty set of actions, with the intended
semantics of leaving existing actions unmodified.  This seems to have
been brokin after OVS 1.7, as we have assigned the flow's actions
pointer to NULL in this case, but we never check for the NULL pointer
later on.  This patch restores the intended behavior and documents it
in the include/linux/openvswitch.h.
Signed-off-by: NJarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>

The 5-tuple optimization becomes unnecessary with a later per-NUMA
node stats patch.  Remove it first to make the changes easier to
grasp.
Signed-off-by: NJarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: NJesse Gross <jesse@nicira.com>

skb_zerocopy can copy elements of the frags array between skbs, but it doesn't
orphan them. Also, it doesn't handle errors, so this patch takes care of that
as well, and modify the callers accordingly. skb_tx_error() is also added to
the callers so they will signal the failed delivery towards the creator of the
skb.
Signed-off-by: NZoltan Kiss <zoltan.kiss@citrix.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

Replace the bh safe variant with the hard irq safe variant.

We need a hard irq safe variant to deal with netpoll transmitting
packets from hard irq context, and we need it in most if not all of
the places using the bh safe variant.

Except on 32bit uni-processor the code is exactly the same so don't
bother with a bh variant, just have a hard irq safe variant that
everyone can use.
Signed-off-by: N"Eric W. Biederman" <ebiederm@xmission.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

ovs_vport_cmd_dump() did rcu_read_lock() only after getting the
datapath, which could have been deleted in between.  Resolved by
taking rcu_read_lock() before the get_dp() call.
Signed-off-by: NJarno Rajahalme <jrajahalme@nicira.com>
Signed-off-by: NPravin B Shelar <pshelar@nicira.com>

This fixes crash when userspace does "ovs-dpctl add-dp dev" where dev is
existing non-dp netdevice.

Introduced by:
commit 44da5ae5
"openvswitch: Drop user features if old user space attempted to create datapath"
Signed-off-by: NJiri Pirko <jiri@resnulli.us>
Signed-off-by: NJesse Gross <jesse@nicira.com>

Openvswitch defines u64_stats_sync as ->sync rather than ->syncp,
so fails to compile with netdev_alloc_pcpu_stats(). So just rename it to ->syncp.
Reported-by: Nkbuild test robot <fengguang.wu@intel.com>
Fixes: 1c213bd2 (net: introduce netdev_alloc_pcpu_stats() for drivers)
Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Reviewed-by: NFlavio Leitner <fbl@redhat.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

There are many drivers calling alloc_percpu() to allocate pcpu stats
and then initializing ->syncp. So just introduce a helper function for them.

Cc: David S. Miller <davem@davemloft.net>
Signed-off-by: NCong Wang <xiyou.wangcong@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

With subfacets, we'd expect megaflow updates message to carry
the original micro flow. If not, EINVAL is returned and kernel
logs an error message.  Now that the user space subfacet layer is
removed, it is expected that flow updates can arrive with a
micro flow other than the original. Change the return code to
EEXIST and remove the kernel error log message.
Reported-by: NBen Pfaff <blp@nicira.com>
Signed-off-by: NAndy Zhou <azhou@nicira.com>
Signed-off-by: NJesse Gross <jesse@nicira.com>