- 19 2月, 2016 1 次提交
-
-
由 Dave Hansen 提交于
We try to enforce protection keys in software the same way that we do in hardware. (See long example below). But, we only want to do this when accessing our *own* process's memory. If GDB set PKRU[6].AD=1 (disable access to PKEY 6), then tried to PTRACE_POKE a target process which just happened to have some mprotect_pkey(pkey=6) memory, we do *not* want to deny the debugger access to that memory. PKRU is fundamentally a thread-local structure and we do not want to enforce it on access to _another_ thread's data. This gets especially tricky when we have workqueues or other delayed-work mechanisms that might run in a random process's context. We can check that we only enforce pkeys when operating on our *own* mm, but delayed work gets performed when a random user context is active. We might end up with a situation where a delayed-work gup fails when running randomly under its "own" task but succeeds when running under another process. We want to avoid that. To avoid that, we use the new GUP flag: FOLL_REMOTE and add a fault flag: FAULT_FLAG_REMOTE. They indicate that we are walking an mm which is not guranteed to be the same as current->mm and should not be subject to protection key enforcement. Thanks to Jerome Glisse for pointing out this scenario. Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com> Reviewed-by: NThomas Gleixner <tglx@linutronix.de> Cc: Alexey Kardashevskiy <aik@ozlabs.ru> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Andy Lutomirski <luto@kernel.org> Cc: Arnd Bergmann <arnd@arndb.de> Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org> Cc: Boaz Harrosh <boaz@plexistor.com> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dan Williams <dan.j.williams@intel.com> Cc: Dave Chinner <dchinner@redhat.com> Cc: Dave Hansen <dave.hansen@linux.intel.com> Cc: David Gibson <david@gibson.dropbear.id.au> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: Dominik Dingel <dingel@linux.vnet.ibm.com> Cc: Dominik Vogt <vogt@linux.vnet.ibm.com> Cc: Eric B Munson <emunson@akamai.com> Cc: Geliang Tang <geliangtang@163.com> Cc: Guan Xuetao <gxt@mprc.pku.edu.cn> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Heiko Carstens <heiko.carstens@de.ibm.com> Cc: Hugh Dickins <hughd@google.com> Cc: Jan Kara <jack@suse.cz> Cc: Jason Low <jason.low2@hp.com> Cc: Jerome Marchand <jmarchan@redhat.com> Cc: Joerg Roedel <joro@8bytes.org> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Konstantin Khlebnikov <koct9i@gmail.com> Cc: Laurent Dufour <ldufour@linux.vnet.ibm.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Martin Schwidefsky <schwidefsky@de.ibm.com> Cc: Matthew Wilcox <willy@linux.intel.com> Cc: Mel Gorman <mgorman@suse.de> Cc: Michael Ellerman <mpe@ellerman.id.au> Cc: Michal Hocko <mhocko@suse.com> Cc: Mikulas Patocka <mpatocka@redhat.com> Cc: Minchan Kim <minchan@kernel.org> Cc: Oleg Nesterov <oleg@redhat.com> Cc: Paul Mackerras <paulus@samba.org> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Sasha Levin <sasha.levin@oracle.com> Cc: Shachar Raindel <raindel@mellanox.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: Xie XiuQi <xiexiuqi@huawei.com> Cc: iommu@lists.linux-foundation.org Cc: linux-arch@vger.kernel.org Cc: linux-kernel@vger.kernel.org Cc: linux-mm@kvack.org Cc: linux-s390@vger.kernel.org Cc: linuxppc-dev@lists.ozlabs.org Signed-off-by: NIngo Molnar <mingo@kernel.org>
-
- 16 2月, 2016 2 次提交
-
-
由 Dave Hansen 提交于
We will soon modify the vanilla get_user_pages() so it can no longer be used on mm/tasks other than 'current/current->mm', which is by far the most common way it is called. For now, we allow the old-style calls, but warn when they are used. (implemented in previous patch) This patch switches all callers of: get_user_pages() get_user_pages_unlocked() get_user_pages_locked() to stop passing tsk/mm so they will no longer see the warnings. Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com> Reviewed-by: NThomas Gleixner <tglx@linutronix.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave@sr71.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: jack@suse.cz Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20160212210156.113E9407@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
由 Dave Hansen 提交于
For protection keys, we need to understand whether protections should be enforced in software or not. In general, we enforce protections when working on our own task, but not when on others. We call these "current" and "remote" operations. This patch introduces a new get_user_pages() variant: get_user_pages_remote() Which is a replacement for when get_user_pages() is called on non-current tsk/mm. We also introduce a new gup flag: FOLL_REMOTE which can be used for the "__" gup variants to get this new behavior. The uprobes is_trap_at_addr() location holds mmap_sem and calls get_user_pages(current->mm) on an instruction address. This makes it a pretty unique gup caller. Being an instruction access and also really originating from the kernel (vs. the app), I opted to consider this a 'remote' access where protection keys will not be enforced. Without protection keys, this patch should not change any behavior. Signed-off-by: NDave Hansen <dave.hansen@linux.intel.com> Reviewed-by: NThomas Gleixner <tglx@linutronix.de> Cc: Andrea Arcangeli <aarcange@redhat.com> Cc: Andrew Morton <akpm@linux-foundation.org> Cc: Andy Lutomirski <luto@amacapital.net> Cc: Borislav Petkov <bp@alien8.de> Cc: Brian Gerst <brgerst@gmail.com> Cc: Dave Hansen <dave@sr71.net> Cc: Denys Vlasenko <dvlasenk@redhat.com> Cc: H. Peter Anvin <hpa@zytor.com> Cc: Kirill A. Shutemov <kirill.shutemov@linux.intel.com> Cc: Linus Torvalds <torvalds@linux-foundation.org> Cc: Naoya Horiguchi <n-horiguchi@ah.jp.nec.com> Cc: Peter Zijlstra <peterz@infradead.org> Cc: Rik van Riel <riel@redhat.com> Cc: Srikar Dronamraju <srikar@linux.vnet.ibm.com> Cc: Vlastimil Babka <vbabka@suse.cz> Cc: jack@suse.cz Cc: linux-mm@kvack.org Link: http://lkml.kernel.org/r/20160212210154.3F0E51EA@viggo.jf.intel.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
-
- 13 2月, 2016 2 次提交
-
-
由 Leon Romanovsky 提交于
Fix the RC QPs send queue overhead computation to take into account two additional segments in the WQE which are needed for registration operations. The ATOMIC and UMR segments can't coexist together, so chose maximum out of them. The commit 9e65dc37 ("IB/mlx5: Fix RC transport send queue overhead computation") was intended to update RC transport as commit messages states, but added the code to UC transport. Fixes: 9e65dc37 ("IB/mlx5: Fix RC transport send queue overhead computation") Signed-off-by: NKamal Heib <kamalh@mellanox.com> Signed-off-by: NLeon Romanovsky <leonro@mellanox.com> Reviewed-by: NSagi Grimberg <sagig@mellanox.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Alex Estrin 提交于
A narrow window for race condition still exist between multicast join thread and *dev_flush workers. A kernel crash caused by prolong erratic link state changes was observed (most likely a faulty cabling): [167275.656270] BUG: unable to handle kernel NULL pointer dereference at 0000000000000020 [167275.665973] IP: [<ffffffffa05f8f2e>] ipoib_mcast_join+0xae/0x1d0 [ib_ipoib] [167275.674443] PGD 0 [167275.677373] Oops: 0000 [#1] SMP ... [167275.977530] Call Trace: [167275.982225] [<ffffffffa05f92f0>] ? ipoib_mcast_free+0x200/0x200 [ib_ipoib] [167275.992024] [<ffffffffa05fa1b7>] ipoib_mcast_join_task+0x2a7/0x490 [ib_ipoib] [167276.002149] [<ffffffff8109d5fb>] process_one_work+0x17b/0x470 [167276.010754] [<ffffffff8109e3cb>] worker_thread+0x11b/0x400 [167276.019088] [<ffffffff8109e2b0>] ? rescuer_thread+0x400/0x400 [167276.027737] [<ffffffff810a5aef>] kthread+0xcf/0xe0 Here was a hit spot: ipoib_mcast_join() { .............. rec.qkey = priv->broadcast->mcmember.qkey; ^^^^^^^ ..... } Proposed patch should prevent multicast join task to continue if link state change is detected. Signed-off-by: NAlex Estrin <alex.estrin@intel.com> Changes from v4: - as suggested by Doug Ledford, optimized spinlock usage, i.e. ipoib_mcast_join() is called with lock held. Changes from v3: - sync with priv->lock before flag check. Chages from v2: - Move check for OPER_UP flag state to mcast_join() to ensure no event worker is in progress. - minor style fixes. Changes from v1: - No need to lock again if error detected. Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 12 2月, 2016 2 次提交
-
-
由 Eran Ben Elisha 提交于
When checking specific attribute from a bit mask, need to use bitwise AND and not logical AND, fixed that. Fixes: 145d9c54 ('IB/core: Display extended counter set if available') Signed-off-by: NEran Ben Elisha <eranbe@mellanox.com> Signed-off-by: NMatan Barak <matanb@mellanox.com> Reviewed-by: NOr Gerlitz <ogerlitz@mellanox.com> Reviewed-by: NChristoph Lameter <cl@linux.com> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
由 Rasmus Villemoes 提交于
The while loop after err_slaves should use post-decrement; otherwise we'll fail to do the kfrees for i==0, and will run into out-of-bounds accesses if the setup above failed already at i==0. [I'm not sure why one even bothers populating the ->vlan_filter array: mlx4.h isn't #included by anything outside drivers/net/ethernet/mellanox/mlx4/, and "git grep -C2 -w vlan_filter drivers/net/ethernet/mellanox/mlx4/" seems to suggest that the vlan_filter elements aren't used at all.] Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk> Signed-off-by: NDoug Ledford <dledford@redhat.com>
-
- 11 2月, 2016 22 次提交
-
-
由 Ulf Hansson 提交于
This reverts commit 829b6962. Revert this change as it causes a sysfs path to change and therefore introduces and ABI regression. More precisely Android's vold is not being able to access /sys/module/mmcblk/parameters/perdev_minors any more, since the path becomes changed to: "/sys/module/mmc_block/..." Fixes: 829b6962 ("mmc: block: don't use parameter prefix if built as module") Reported-by: NJohn Stultz <john.stultz@linaro.org> Cc: Andy Shevchenko <andriy.shevchenko@linux.intel.com> Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
-
由 Javi Merino 提交于
In __cpufreq_cooling_register() we allocate the arrays for time_in_idle and time_in_idle_timestamp to be as big as the number of cpus in this cpufreq device. However, in get_load() we access this array using the cpu number as index, which can result in an out of bound access. Index time_in_idle{,_timestamp} using the index in the cpufreq_device's allowed_cpus mask, as we do for the load_cpu array in cpufreq_get_requested_power() Reported-by: NNicolas Boichat <drinkcat@chromium.org> Cc: Amit Daniel Kachhap <amit.kachhap@gmail.com> Cc: Zhang Rui <rui.zhang@intel.com> Cc: Eduardo Valentin <edubezval@gmail.com> Tested-by: NNicolas Boichat <drinkcat@chromium.org> Acked-by: NViresh Kumar <viresh.kumar@linaro.org> Signed-off-by: NJavi Merino <javi.merino@arm.com> Signed-off-by: NEduardo Valentin <edubezval@gmail.com>
-
由 Adrian Hunter 提交于
Intel BXT/APL use a card detect GPIO however the host controller will not enable bus power unless it's card detect also reflects the presence of a card. Unfortunately those 2 things race which can result in commands not starting, after which the controller does nothing and there is a 10 second wait for the driver's 10-second timer to timeout. That is fixed by having the driver look also at the present state register to determine if the card is present. Consequently, provide a 'get_cd' mmc host operation for BXT/APL that does that. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org # v4.4+ Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
-
由 Adrian Hunter 提交于
Intel BXT/APL use a card detect GPIO however the host controller will not enable bus power unless it's card detect also reflects the presence of a card. Unfortunately those 2 things race which can result in commands not starting, after which the controller does nothing and there is a 10 second wait for the driver's 10-second timer to timeout. That is fixed by having the driver look also at the present state register to determine if the card is present. Consequently, provide a 'get_cd' mmc host operation for BXT/APL that does that. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org # v4.4+ Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
-
由 Adrian Hunter 提交于
Drivers may need to provide their own get_cd() mmc host op, but currently the internals of the current op (sdhci_get_cd()) are provided by sdhci_do_get_cd() which is also called from sdhci_request(). To allow override of the get_cd functionality, change sdhci_request() to call ->get_cd() instead of sdhci_do_get_cd(). Note, in the future the call to ->get_cd() will likely be removed from sdhci_request() since most drivers don't need actually it. However this change is being done now to facilitate a subsequent bug fix. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org # v4.4+ Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
-
由 Adrian Hunter 提交于
In the past, fixes for specific hardware devices were implemented in sdhci using quirks. That approach is no longer accepted because the growing number of quirks was starting to make the code difficult to understand and maintain. One alternative to quirks, is to allow drivers to override the default mmc host operations. This patch makes it easy to do that, and it is needed for a subsequent bug fix, for which separate patches are provided. Signed-off-by: NAdrian Hunter <adrian.hunter@intel.com> Cc: stable@vger.kernel.org # v4.4+ Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
-
由 Jon Hunter 提交于
EOImode1 is only used for the root controller and hence only the root controller uses the eoimode1 functions for handling interrupts. However, if the root controller supports EOImode1, then the EOImodeNS bit will be set for all GICs, enabling EOImode1. This is not what we want and this causes interrupts on non-root GICs to only be dropped in priority but never deactivated. Therefore, only set the EOImodeNS bit for the root controller. Acked-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NJon Hunter <jonathanh@nvidia.com> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
由 Jon Hunter 提交于
Setting the affinity of an IRQ, it only applicable for the root interrupt controller and so only populate this operator for the root controller. Acked-by: NMarc Zyngier <marc.zyngier@arm.com> Signed-off-by: NJon Hunter <jonathanh@nvidia.com> Signed-off-by: NMarc Zyngier <marc.zyngier@arm.com>
-
由 Daniel Stone 提交于
Calling component_add() may result in the completion of a set of devices, which will try to bring up a master. In bringing the master up, we populate its match array with the current set of children. If binding any of the devices fails, component_add() itself will fail, free the struct component entry, and return to the caller. The now-freed entry is never removed from the master's match array, and will later be used in a futile attempt to bind to freed memory. Bring component_add's behaviour on failure to bring up a master into line with component_del by removing the (to-be-freed) component from the master's match array. The specific case which broke was: - rockchip_drm_drv adds a component master - dwhdmi_rockchip adds a child component in probe (master incomplete) - rockchip_drm_vop adds two children in probe, which completes the set - inside component_add, we try to bring up the master, having populated the master's match array, and fail with EPROBE_DEFER from dwhdmi_rockchip; we delete the putative component - rockchip_drm_vop's probe fails and returns EPROBE_DEFER - we later re-probe rockchip_drm_vop and add the component; the master is complete, so we attempt to bring it up again - walking the match array, we find the previous child, whose master pointer doesn't match (as it has been freed in the meantime) - rockchip_drm_vop probe fails, and will never be attempted again Fixes: ffc30b74Signed-off-by: NDaniel Stone <daniels@collabora.com> Cc: Russell King <rmk+kernel@arm.linux.org.uk> Cc: Thierry Reding <treding@nvidia.com> Cc: Laurent Pinchart <laurent.pinchart@ideasonboard.com> Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
-
由 Quinn Tran 提交于
Signed-off-by: NQuinn Tran <quinn.tran@qlogic.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com> Fixes: fb3269ba ("qla2xxx: Add selective command queuing") Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Quinn Tran 提交于
Signed-off-by: NQuinn Tran <quinn.tran@qlogic.com> Reviewed-by: NChristoph Hellwig <hch@lst.de> Reviewed-by: NBart Van Assche <bart.vanassche@sandisk.com> Fixes: fb3269ba ("qla2xxx: Add selective command queuing") Signed-off-by: NHimanshu Madhani <himanshu.madhani@qlogic.com> Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Nicholas Bellinger 提交于
This patch fixes an incorrect return of zero from the new unmap_zeroes_data_store() configfs store attribute handler introduced in v4.5-rc1, to use the correct 'count' bytes return value. Signed-off-by: NNicholas Bellinger <nab@linux-iscsi.org>
-
由 Christian König 提交于
Otherwise we could try to evict overlapping userptr BOs in get_user_pages(), leading to a possible circular locking dependency. Signed-off-by: NChristian König <christian.koenig@amd.com> Acked-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Nicolai Hähnle 提交于
An arbitrary amount of time can pass between spin_unlock and radeon_fence_wait_any, so we need to ensure that nobody frees the fences from under us. Based on the analogous fix for amdgpu. Signed-off-by: NNicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org
-
由 Nicolai Hähnle 提交于
Signed-off-by: NNicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org
-
由 Nicolai Hähnle 提交于
An arbitrary amount of time can pass between spin_unlock and fence_wait_any_timeout, so we need to ensure that nobody frees the fences from under us. A stress test (rapidly starting and killing hundreds of glxgears instances) ran into a deadlock in fence_wait_any_timeout after about an hour, and this race condition appears to be a plausible cause. v2: agd: rebase on upstream Signed-off-by: NNicolai Hähnle <nicolai.haehnle@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Reviewed-by: NChristian König <christian.koenig@amd.com> Cc: stable@vger.kernel.org
-
由 Flora Cui 提交于
No need to re-init asic if it's already been initialized. Skip IB tests since kernel processes are frozen in thaw. Signed-off-by: NFlora Cui <Flora.Cui@amd.com> Reviewed-by: NAlex Deucher <alexander.deucher@amd.com> Cc: stable@vger.kernel.org
-
由 Alexandra Yates 提交于
Adding Intel codename DNV platform device IDs for SATA. Signed-off-by: NAlexandra Yates <alexandra.yates@linux.intel.com> Signed-off-by: NTejun Heo <tj@kernel.org> Cc: stable@vger.kernel.org
-
由 Rasmus Villemoes 提交于
This fails to undo the setup for pin==0; moreover, something interesting happens if the setup failed already at pin==0. Signed-off-by: NRasmus Villemoes <linux@rasmusvillemoes.dk> Fixes: f899fc64 ("drm/i915: use GMBUS to manage i2c links") Cc: stable@vger.kernel.org Signed-off-by: NJani Nikula <jani.nikula@intel.com> Link: http://patchwork.freedesktop.org/patch/msgid/1455048677-19882-3-git-send-email-linux@rasmusvillemoes.dk (cherry picked from commit 2417c8c0) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Lyude 提交于
We accidentally point both cfgcr registers for the second shared DPLL to the same location in i915_reg.h. This results in a lot of hw pipe state mismatches whenever we try to do a modeset that requires allocating the DPLL to a CRTC: [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in dpll_hw_state.cfgcr1 (expected 0x80000168, found 0x000004a5) [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in base.adjusted_mode.crtc_clock (expected 108000, found 49500) [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in port_clock (expected 108000, found 49500) This usually ends up causing blank monitors, since the DPLL never can get set to the right clock. Fixes: 086f8e84 ("drm/i915: Prefix raw register defines with underscore") Signed-off-by: NLyude <cpaul@redhat.com> Cc: drm-intel-fixes@lists.freedesktop.org Reviewed-by: NVille Syrjälä <ville.syrjala@linux.intel.com> Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1454600601-21900-1-git-send-email-cpaul@redhat.com (cherry picked from commit da3b891b) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
由 Chris Paterson 提交于
Commit 27cbd7e8 ("mmc: sh_mmcif: rework dma channel handling") introduced a typo causing the TX DMA channel allocation to be overwritten by the requested RX DMA channel. Fixes: 27cbd7e8 ("mmc: sh_mmcif: rework dma channel handling") Signed-off-by: NChris Paterson <chris.paterson2@renesas.com> Acked-by: NLaurent Pinchart <laurent.pinchart@ideasonboard.com> Acked-by: NArnd Bergmann <arnd@arndb.de> Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
-
由 Lyude 提交于
We don't actually check for INTEL_OUTPUT_DP_MST at all in here, as a result we skip assigning a DPLL to any DP MST ports, which makes link training fail: [ 1442.933896] [drm:intel_power_well_enable] enabling DDI D power well [ 1442.933905] [drm:skl_set_power_well] Enabling DDI D power well [ 1442.933957] [drm:intel_mst_pre_enable_dp] 0 [ 1442.935474] [drm:intel_dp_set_signal_levels] Using signal levels 00000000 [ 1442.935477] [drm:intel_dp_set_signal_levels] Using vswing level 0 [ 1442.935480] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 0 [ 1442.936190] [drm:intel_dp_set_signal_levels] Using signal levels 05000000 [ 1442.936193] [drm:intel_dp_set_signal_levels] Using vswing level 1 [ 1442.936195] [drm:intel_dp_set_signal_levels] Using pre-emphasis level 1 [ 1442.936858] [drm:intel_dp_set_signal_levels] Using signal levels 08000000 [ 1442.936862] [drm:intel_dp_set_signal_levels] Using vswing level 2 … [ 1442.998253] [drm:intel_dp_link_training_clock_recovery [i915]] *ERROR* too many full retries, give up [ 1442.998512] [drm:intel_dp_start_link_train [i915]] *ERROR* failed to train DP, aborting After which the pipe state goes completely out of sync: [ 70.075596] [drm:check_crtc_state] [CRTC:25] [ 70.075696] [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in ddi_pll_sel (expected 0x00000000, found 0x00000001) [ 70.075747] [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in shared_dpll (expected -1, found 0) [ 70.075798] [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in dpll_hw_state.ctrl1 (expected 0x00000000, found 0x00000021) [ 70.075840] [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in dpll_hw_state.cfgcr1 (expected 0x00000000, found 0x80400173) [ 70.075884] [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in dpll_hw_state.cfgcr2 (expected 0x00000000, found 0x000003a5) [ 70.075954] [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in base.adjusted_mode.crtc_clock (expected 262750, found 72256) [ 70.075999] [drm:intel_pipe_config_compare [i915]] *ERROR* mismatch in port_clock (expected 540000, found 148500) And if you're especially lucky, it keeps going downhill: [ 83.309256] Kernel panic - not syncing: Timeout: Not all CPUs entered broadcast exception handler [ 83.309265] [ 83.309265] ================================= [ 83.309266] [ INFO: inconsistent lock state ] [ 83.309267] 4.5.0-rc1Lyude-Test #265 Not tainted [ 83.309267] --------------------------------- [ 83.309268] inconsistent {IN-HARDIRQ-W} -> {HARDIRQ-ON-W} usage. [ 83.309270] Xorg/1194 [HC0[1]:SC0[0]:HE1:SE1] takes: [ 83.309293] (&(&dev_priv->uncore.lock)->rlock){?.-...}, at: [<ffffffffa02a6073>] gen9_write32+0x63/0x400 [i915] [ 83.309293] {IN-HARDIRQ-W} state was registered at: [ 83.309297] [<ffffffff810e84f4>] __lock_acquire+0x9c4/0x1d00 [ 83.309299] [<ffffffff810ea1be>] lock_acquire+0xce/0x1c0 [ 83.309302] [<ffffffff8177d936>] _raw_spin_lock_irqsave+0x56/0x90 [ 83.309321] [<ffffffffa02a5492>] gen9_read32+0x52/0x3d0 [i915] [ 83.309332] [<ffffffffa024beea>] gen8_irq_handler+0x27a/0x6a0 [i915] [ 83.309337] [<ffffffff810fdbc1>] handle_irq_event_percpu+0x41/0x300 [ 83.309339] [<ffffffff810fdeb9>] handle_irq_event+0x39/0x60 [ 83.309341] [<ffffffff811010b4>] handle_edge_irq+0x74/0x130 [ 83.309344] [<ffffffff81009073>] handle_irq+0x73/0x120 [ 83.309346] [<ffffffff817805f1>] do_IRQ+0x61/0x120 [ 83.309348] [<ffffffff8177e6d6>] ret_from_intr+0x0/0x20 [ 83.309351] [<ffffffff815f5105>] cpuidle_enter_state+0x105/0x330 [ 83.309353] [<ffffffff815f5367>] cpuidle_enter+0x17/0x20 [ 83.309356] [<ffffffff810dbe1a>] call_cpuidle+0x2a/0x50 [ 83.309358] [<ffffffff810dc1dd>] cpu_startup_entry+0x26d/0x3a0 [ 83.309360] [<ffffffff817701da>] rest_init+0x13a/0x140 [ 83.309363] [<ffffffff81f2af8e>] start_kernel+0x475/0x482 [ 83.309365] [<ffffffff81f2a315>] x86_64_start_reservations+0x2a/0x2c [ 83.309367] [<ffffffff81f2a452>] x86_64_start_kernel+0x13b/0x14a Fixes: 82d35437 ("drm/i915/skl: Implementation of SKL DPLL programming") Signed-off-by: NLyude <cpaul@redhat.com> Cc: stable@vger.kernel.org Signed-off-by: NDaniel Vetter <daniel.vetter@ffwll.ch> Link: http://patchwork.freedesktop.org/patch/msgid/1454428183-994-1-git-send-email-cpaul@redhat.com (cherry picked from commit 78385cb3) Signed-off-by: NJani Nikula <jani.nikula@intel.com>
-
- 10 2月, 2016 11 次提交
-
-
由 David Wragg 提交于
Prior to 4.3, openvswitch tunnel vports (vxlan, gre and geneve) could transmit vxlan packets of any size, constrained only by the ability to send out the resulting packets. 4.3 introduced netdevs corresponding to tunnel vports. These netdevs have an MTU, which limits the size of a packet that can be successfully encapsulated. The default MTU values are low (1500 or less), which is awkwardly small in the context of physical networks supporting jumbo frames, and leads to a conspicuous change in behaviour for userspace. Instead, set the MTU on openvswitch-created netdevs to be the relevant maximum (i.e. the maximum IP packet size minus any relevant overhead), effectively restoring the behaviour prior to 4.3. Signed-off-by: NDavid Wragg <david@weave.works> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Wragg 提交于
Allow the MTU of geneve devices to be set to large values, in order to exploit underlying networks with larger frame sizes. GENEVE does not have a fixed encapsulation overhead (an openvswitch rule can add variable length options), so there is no relevant maximum MTU to enforce. A maximum of IP_MAX_MTU is used instead. Encapsulated packets that are too big for the underlying network will get dropped on the floor. Signed-off-by: NDavid Wragg <david@weave.works> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 David Wragg 提交于
Allow the MTU of vxlan devices without an underlying device to be set to larger values (up to a maximum based on IP packet limits and vxlan overhead). Previously, their MTUs could not be set to higher than the conventional ethernet value of 1500. This is a very arbitrary value in the context of vxlan, and prevented vxlan devices from being able to take advantage of jumbo frames etc. The default MTU remains 1500, for compatibility. Signed-off-by: NDavid Wragg <david@weave.works> Acked-by: NRoopa Prabhu <roopa@cumulusnetworks.com> Signed-off-by: NDavid S. Miller <davem@davemloft.net>
-
由 Lokesh Vutla 提交于
Driver only needs to allocate for [ngpio / 32] controllers, as each controller handles 32 gpios. But the current driver allocates for ngpio of which the extra allocated are unused. Fix it be registering only the required number of controllers. Signed-off-by: NLokesh Vutla <lokeshvutla@ti.com> Signed-off-by: NKeerthy <j-keerthy@ti.com> Reviewed-by: NGrygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Keerthy 提交于
Currently the first parameter of irq_domain_add_legacy is NULL. irq_find_host function returns NULL when we do not populate the of_node and hence irq_of_parse_and_map call fails whenever we want to request a gpio irq. This fixes the request_irq failures for gpio interrupts. Signed-off-by: NKeerthy <j-keerthy@ti.com> Reviewed-by: NGrygorii Strashko <grygorii.strashko@ti.com> Signed-off-by: NLinus Walleij <linus.walleij@linaro.org>
-
由 Olof Johansson 提交于
This used to return -EFAULT, but the function above returns -EINVAL on the same condition so let's stick to that. The removal of error return on this path was introduced with b093410c ('mmc: block: copy resp[] data on err for MMC_IOC_MULTI_CMD'). Fixes: b093410c ('mmc: block: copy resp[] data on err for MMC_IOC_MULTI_CMD'). Signed-off-by: NOlof Johansson <olof@lixom.net> Cc: Grant Grundler <grundler@google.com> Signed-off-by: NUlf Hansson <ulf.hansson@linaro.org>
-
由 Tony Lindgren 提交于
If we reload phy-twl4030-usb, we get a warning about unbalanced pm_runtime_enable. Let's fix the issue and also fix idling of the device on unload before we attempt to shut it down. If we don't properly idle the PHY before shutting it down on removal, the twl4030 ends up consuming about 62mW of extra power compared to running idle with the module loaded. Cc: stable@vger.kernel.org Cc: Bin Liu <b-liu@ti.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: NeilBrown <neil@brown.name> Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
-
由 Tony Lindgren 提交于
Otherwise rmmod omap2430; rmmod phy-twl4030-usb; modprobe omap2430 will try to use a non-existing phy and oops: Unable to handle kernel paging request at virtual address b6f7c1f0 ... [<c048a284>] (devm_usb_get_phy_by_node) from [<bf0758ac>] (omap2430_musb_init+0x44/0x2b4 [omap2430]) [<bf0758ac>] (omap2430_musb_init [omap2430]) from [<bf055ec0>] (musb_init_controller+0x194/0x878 [musb_hdrc]) Cc: stable@vger.kernel.org Cc: Bin Liu <b-liu@ti.com> Cc: Felipe Balbi <balbi@ti.com> Cc: Kishon Vijay Abraham I <kishon@ti.com> Cc: NeilBrown <neil@brown.name> Signed-off-by: NTony Lindgren <tony@atomide.com> Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
-
由 Shawn Lin 提交于
If phy_pm_runtime_get_sync failed but we already enable regulator, current code return directly without doing regulator_disable. This patch fix this problem and cleanup err handle of phy_power_on to be more readable. Fixes: 3be88125 ("phy: core: Support regulator ...") Cc: <stable@vger.kernel.org> # v3.18+ Cc: Roger Quadros <rogerq@ti.com> Cc: Axel Lin <axel.lin@ingics.com> Signed-off-by: NShawn Lin <shawn.lin@rock-chips.com> Signed-off-by: NKishon Vijay Abraham I <kishon@ti.com>
-
由 Geert Uytterhoeven 提交于
drivers/input/touchscreen/colibri-vf50-ts.c: In function ‘vf50_ts_probe’: drivers/input/touchscreen/colibri-vf50-ts.c:302: error: implicit declaration of function ‘of_property_read_u32’ Signed-off-by: NGeert Uytterhoeven <geert@linux-m68k.org> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-
由 Lars-Peter Clausen 提交于
The adp5589 has row 5, don't skip it when creating the GPIO mapping. Otherwise the pin gets reserved as used and it is not possible to use it as a GPIO. Signed-off-by: NLars-Peter Clausen <lars@metafoo.de> Acked-by: NMichael Hennerich <michael.hennerich@analog.com> Signed-off-by: NDmitry Torokhov <dmitry.torokhov@gmail.com>
-