Fix to return a negative error code from the error handling
case instead of 0, as returned elsewhere in this function.
Signed-off-by: NWei Yongjun <yongjun_wei@trendmicro.com.cn>
Acked-by: NSjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Some head files were split or moved to uapi/ without
updating MAINTAINERS.
Signed-off-by: Amos Kong <kongjianjun@gmail.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

virtio_balloon.h exports "u16" and "u64" to userspace. Use "__u16" and
"__u64" instead.
Signed-off-by: NPaul Bolle <pebolle@tiscali.nl>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Check that vringh_config is not NULL before using it.
Signed-off-by: NSjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Check on the correct return value from
vringh_notify_enable_kern(). It returns false if
more packets are available, not true.
Signed-off-by: NSjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Make the rest of the paths use virtqueue_add_sgs or add_outbuf.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

virtio_add_buf() is going away, replaced with virtio_add_sgs() which
takes multiple terminated scatterlists.

Cc: Eric Van Hensbergen <ericvh@gmail.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

We never add buffers with input and output parts, so use the new accessors.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

We never add buffers with input and output parts, so use the new accessors.

Cc: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

We never add buffers with input and output parts, so use the new accessors.

Cc: Sjur Brendeland <sjur.brandeland@stericsson.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

We never add buffers with input and output parts, so use the new accessors.
Acked-by: NAmit Shah <amit.shah@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

We never add buffers with input and output parts, so use the new accessors.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Reviewed-by: NAsias He <asias@redhat.com>

We never add buffers with input and output parts, so use the new accessors.

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Reviewed-by: NAsias He <asias@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

It's a bit cleaner to hand multiple sgs, rather than one big one.

Cc: "Michael S. Tsirkin" <mst@redhat.com>
Tested-by: NWanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

It's a bit clearer, and add_buf is going away.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Reviewed-by: NAsias He <asias@redhat.com>

Using the new virtqueue_add_sgs function lets us simplify the queueing
path.  In particular, all data protected by the tgt_lock is just gone
(multiqueue will find a new use for the lock).
Signed-off-by: NWanlong Gao <gaowanlong@cn.fujitsu.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAsias He <asias@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

It's simply a flag as to whether we have data now, so make it an
explicit function parameter rather than a member of struct
virtblk_req.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Reviewed-by: NAsias He <asias@redhat.com>

(This is a respin of Paolo Bonzini's patch, but it calls
virtqueue_add_sgs() instead of his multi-part API).

This is similar to the previous patch, but a bit more radical
because the bio and req paths now share the buffer construction
code.  Because the req path doesn't use vbr->sg, however, we
need to add a couple of arguments to __virtblk_add_req.

We also need to teach __virtblk_add_req how to build SCSI command
requests.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Reviewed-by: NAsias He <asias@redhat.com>

(This is a respin of Paolo Bonzini's patch, but it calls
virtqueue_add_sgs() instead of his multi-part API).

Move the creation of the request header and response footer to
__virtblk_add_req.  vbr->sg only contains the data scatterlist,
the header/footer are added separately using virtqueue_add_sgs().

With this change, virtio-blk (with use_bio) is not relying anymore on
the virtio functions ignoring the end markers in a scatterlist.
The next patch will do the same for the other path.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Reviewed-by: NAsias He <asias@redhat.com>

Right now, both virtblk_add_req and virtblk_add_req_wait call
virtqueue_add_buf.  To prepare for the next patches, abstract the call
to virtqueue_add_buf into a new function __virtblk_add_req, and include
the waiting logic directly in virtblk_add_req.
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Reviewed-by: NAsias He <asias@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

As expected, the simplified accessors are faster.

for i in `seq 50`; do /usr/bin/time -f 'Wall time:%e' ./vringh_test --indirect --eventidx --parallel --fast-vringh; done 2>&1 | stats --trim-outliers:

Before:
	Using CPUS 0 and 3
	Guest: notified 0, pinged 39062-39063(39063)
	Host: notified 39062-39063(39063), pinged 0
	Wall time:1.760000-2.220000(1.789167)

After:
	Using CPUS 0 and 3
	Guest: notified 0, pinged 39037-39063(39062)
	Host: notified 39037-39063(39062), pinged 0
	Wall time:1.640000-1.810000(1.676875)
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

These are specialized versions of virtqueue_add_buf(), which cover
over 80% of cases and are far clearer.

In particular, the scatterlists passed to these functions don't have
to be clean (ie. we ignore end markers).
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

virtio_scsi can really use this, to avoid the current hack of copying
the whole sg array.  Some other things get slightly neater, too.

This causes a slowdown in virtqueue_add_buf(), which is implemented as
a wrapper.  This is addressed in the next patches.

for i in `seq 50`; do /usr/bin/time -f 'Wall time:%e' ./vringh_test --indirect --eventidx --parallel --fast-vringh; done 2>&1 | stats --trim-outliers:

Before:
	Using CPUS 0 and 3
	Guest: notified 0, pinged 39009-39063(39062)
	Host: notified 39009-39063(39062), pinged 0
	Wall time:1.700000-1.950000(1.723542)

After:
	Using CPUS 0 and 3
	Guest: notified 0, pinged 39062-39063(39063)
	Host: notified 39062-39063(39063), pinged 0
	Wall time:1.760000-2.220000(1.789167)
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Reviewed-by: NWanlong Gao <gaowanlong@cn.fujitsu.com>
Reviewed-by: NAsias He <asias@redhat.com>

This is useful in places that recycle the same scatterlist multiple
times, and do not want to incur the cost of sg_init_table every
time in hot paths.
Acked-by: NJens Axboe <axboe@kernel.dk>
Signed-off-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Add the CAIF Virtio shared memory driver for talking
to a modem.

This CAIF Link layer communicates to the modem over
shared memory. It is implemented as a virtio_driver.
The underlying virtio device is managed by the remoteproc
framework. The Virtio queue is used for transmitting data
to the modem, and the new vringh is used for receiving data.

Genalloc is used for managing the shared memory used for TX
data. The default dma-alloc-coherent allocator can only
allocate whole pages, and this wastes too much shared memory.

Flow control is implemented by stopping the TX-queues if the
virtio queues go full or we run out of memory. Queued are
reopened when queues are below the watermark.

NAPI is used in RX path, and a dedicated tasklet is used
for releasing TX buffers.
Signed-off-by: NErwan Yvin <erwan.yvin@stericsson.com>
Acked-by: NDavid S. Miller <davem@davemloft.net>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (minor fixes)

Add wrappers for the host vrings to support loose
coupling between the virtio device and driver.

A new struct vringh_config_ops with the functions
find_vrhs() and del_vrhs() is added to the virtio_device
struct. This enables virtio drivers to manage virtio
host rings without detailed knowledge of how the
vrings are created and deleted.

The function vringh_notify() is added so vringh clients
can notify the other side that buffers are added to the
used-ring.

Cc: Ohad Ben-Cohen <ohad@wizery.com>
Signed-off-by: NSjur Brændeland <sjur.brandeland@stericsson.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (constified vringh_config)

This is mainly to test the drivers/vhost/vringh.c code, but it also
uses the drivers/virtio/virtio_ring.c code for the guest side.

Usage for testing the basic implementation:

	./vringh_test
	# Test with indirect descriptors
	./vringh_test --indirect
	# Test with indirect descriptors and event indexex
	./vringh_test --indirect --eventidx

You can run a parallel stress test by adding --parallel to any of the
above options.

eg ./vringh_test --parallel:
	Using CPUS 0 and 3
	Guest: notified 10107974, pinged 107970
	Host: notified 108158, pinged 3172148

./vringh_test --indirect --eventidx --parallel:
	Using CPUS 0 and 3
	Guest: notified 156357, pinged 156251
	Host: notified 156251, pinged 78179

Average of 50 times doing ./vringh_test --indirect --eventidx --parallel:
	2.840000-3.040000(2.927292)user
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Getting use of virtio rings correct is tricky, and a recent patch saw
an implementation of in-kernel rings (as separate from userspace).

This abstracts the business of dealing with the virtio ring layout
from the access (userspace or direct); to do this, we use function
pointers, which gcc inlines correctly.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>
Acked-by: NMichael S. Tsirkin <mst@redhat.com>

This makes them a bit more like the kernel headers, so we can include more
real kernel headers in our tests.

In addition this means that we don't break tools/virtio with the next
patch.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

The host side of ring needs this logic too.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Signed-off-by: NMichael S. Tsirkin <mst@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

We haven't been keeping it in sync, so just remove it.
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

When virtio-blk device is resized from host (using block_resize from QEMU) emit
KOBJ_CHANGE uevent to notify guest about such change. This allows user to have
custom udev rules which would take whatever action if such event occurs. As a
proof of concept I've created simple udev rule that automatically resize
filesystem on virtio-blk device.

ACTION=="change", KERNEL=="vd*", \
        ENV{RESIZE}=="1", \
        ENV{ID_FS_TYPE}=="ext[3-4]", \
        RUN+="/sbin/resize2fs /dev/%k"
ACTION=="change", KERNEL=="vd*", \
        ENV{RESIZE}=="1", \
        ENV{ID_FS_TYPE}=="LVM2_member", \
        RUN+="/sbin/pvresize /dev/%k"
Signed-off-by: NMilos Vyletel <milos.vyletel@sde.cz>
Tested-by: NAsias He <asias@redhat.com>
Signed-off-by: Rusty Russell <rusty@rustcorp.com.au> (minor simplification)

Convert the virtio-scsi driver to use pr_err() instead of printk().
Signed-off-by: NWanlong Gao <gaowanlong@cn.fujitsu.com>
Acked-by: NPaolo Bonzini <pbonzini@redhat.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

After commit 07fe9977, lguest tool has already moved from
Documentation/virtual/lguest/ to tools/lguest/.
Signed-off-by: NWanlong Gao <gaowanlong@cn.fujitsu.com>
Signed-off-by: NRusty Russell <rusty@rustcorp.com.au>

Pull fbdev UAPI disintegration from David Howells:
 "You'll be glad to here that the end is nigh for the UAPI patches.
  Only the fbdev/framebuffer piece remains now that the SCSI stuff has
  gone in.

  Here are the UAPI disintegration bits for the fbdev drivers.  It
  appears that Florian hasn't had time to deal with my patch, but back
  in December he did say he didn't mind if I pushed it forward."

Yay.  No more uapi movement.  And hopefully no more big header file
cleanups coming up either, it just tends to be very painful.

* tag 'disintegrate-fbdev-20121220' of git://git.infradead.org/users/dhowells/linux-headers:
  UAPI: (Scripted) Disintegrate include/video

Merge tag 'stable/for-linus-3.9-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen

Pull Xen bug-fixes from Konrad Rzeszutek Wilk:
 - Update the Xen ACPI memory and CPU hotplug locking mechanism.
 - Fix PAT issues wherein various applications would not start
 - Fix handling of multiple MSI as AHCI now does it.
 - Fix ARM compile failures.

* tag 'stable/for-linus-3.9-rc1-tag' of git://git.kernel.org/pub/scm/linux/kernel/git/konrad/xen:
  xenbus: fix compile failure on ARM with Xen enabled
  xen/pci: We don't do multiple MSI's.
  xen/pat: Disable PAT using pat_enabled value.
  xen/acpi: xen cpu hotplug minor updates
  xen/acpi: xen memory hotplug minor updates

Pull  more VFS bits from Al Viro:
 "Unfortunately, it looks like xattr series will have to wait until the
  next cycle ;-/

  This pile contains 9p cleanups and fixes (races in v9fs_fid_add()
  etc), fixup for nommu breakage in shmem.c, several cleanups and a bit
  more file_inode() work"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/viro/vfs:
  constify path_get/path_put and fs_struct.c stuff
  fix nommu breakage in shmem.c
  cache the value of file_inode() in struct file
  9p: if v9fs_fid_lookup() gets to asking server, it'd better have hashed dentry
  9p: make sure ->lookup() adds fid to the right dentry
  9p: untangle ->lookup() a bit
  9p: double iput() in ->lookup() if d_materialise_unique() fails
  9p: v9fs_fid_add() can't fail now
  v9fs: get rid of v9fs_dentry
  9p: turn fid->dlist into hlist
  9p: don't bother with private lock in ->d_fsdata; dentry->d_lock will do just fine
  more file_inode() open-coded instances
  selinux: opened file can't have NULL or negative ->f_path.dentry

(In the meantime, the hlist traversal macros have changed, so this
required a semantic conflict fixup for the newly hlistified fid->dlist)

Pull btrfs fixup from Chris Mason:
 "Geert and James both sent this one in, sorry guys"

* 'for-linus' of git://git.kernel.org/pub/scm/linux/kernel/git/mason/linux-btrfs:
  btrfs/raid56: Add missing #include <linux/vmalloc.h>