Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 12 2月, 2011 1 次提交
  3. 14 1月, 2011 2 次提交
  5. 13 1月, 2011 1 次提交
  7. 07 1月, 2011 2 次提交
  9. 05 1月, 2011 1 次提交
  11. 02 1月, 2011 1 次提交
  13. 24 12月, 2010 1 次提交
    • E
      ARM: 6532/1: Allow machine to specify it's own IRQ handlers at run-time · 52108641
      由 eric miao 提交于 
      Normally different ARM platform has different way to decode the IRQ
hardware status and demultiplex to the corresponding IRQ handler.
This is highly optimized by macro irq_handler in entry-armv.S, and
each machine defines their own macro to decode the IRQ number.
However, this prevents multiple machine classes to be built into a
single kernel.

By allowing each machine to specify thier own handler, and making
function pointer 'handle_arch_irq' to point to it at run time, this
can be solved. And introduce CONFIG_MULTI_IRQ_HANDLER to allow both
solutions to work.

Comparing with the highly optimized macro of irq_handler, the new
function must be written with care not to lose too much performance.
And the IPI stuff on SMP is expected to move to the provided arch
IRQ handler as well.

The assembly code to invoke handle_arch_irq is optimized by Russell
King.
Signed-off-by: NEric Miao <eric.miao@canonical.com>
Acked-by: NNicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
      52108641
  15. 23 12月, 2010 12 次提交
  17. 21 12月, 2010 2 次提交
  19. 20 12月, 2010 2 次提交
    • D
      ARM: 6516/1: Allow SMP_ON_UP to work with Thumb-2 kernels. · ed3768a8
      由 Dave Martin 提交于 
        * __fixup_smp_on_up has been modified with support for the
    THUMB2_KERNEL case.  For THUMB2_KERNEL only, fixups are split
    into halfwords in case of misalignment, since we can't rely on
    unaligned accesses working before turning the MMU on.

    No attempt is made to optimise the aligned case, since the
    number of fixups is typically small, and it seems best to keep
    the code as simple as possible.

  * Add a rotate in the fixup_smp code in order to support
    CPU_BIG_ENDIAN, as suggested by Nicolas Pitre.

  * Add an assembly-time sanity-check to ALT_UP() to ensure that
    the content really is the right size (4 bytes).

    (No check is done for ALT_SMP().  Possibly, this could be fixed
    by splitting the two uses ot ALT_SMP() (ALT_SMP...SMP_UP versus
    ALT_SMP...SMP_UP_B) into two macros.  In the first case,
    ALT_SMP needs to expand to >= 4 bytes, not == 4.)

  * smp_mpidr.h (which implements ALT_SMP()/ALT_UP() manually due
    to macro limitations) has not been modified: the affected
    instruction (mov) has no 16-bit encoding, so the correct
    instruction size is satisfied in this case.

  * A "mode" parameter has been added to smp_dmb:

    smp_dmb arm @ assumes 4-byte instructions (for ARM code, e.g. kuser)
    smp_dmb     @ uses W() to ensure 4-byte instructions for ALT_SMP()

    This avoids assembly failures due to use of W() inside smp_dmb,
    when assembling pure-ARM code in the vectors page.

    There might be a better way to achieve this.

  * Kconfig: make SMP_ON_UP depend on
    (!THUMB2_KERNEL || !BIG_ENDIAN) i.e., THUMB2_KERNEL is now
    supported, but only if !BIG_ENDIAN (The fixup code for Thumb-2
    currently assumes little-endian order.)

Tested using a single generic realview kernel on:
	ARM RealView PB-A8 (CONFIG_THUMB2_KERNEL={n,y})
	ARM RealView PBX-A9 (SMP)
Signed-off-by: NDave Martin <dave.martin@linaro.org>
Acked-by: NNicolas Pitre <nicolas.pitre@linaro.org>
Signed-off-by: NRussell King <rmk+kernel@arm.linux.org.uk>
      ed3768a8
    • H
      ARM: pxa: add iwmmx support for PJ4 · ef6c8445
      由 Haojian Zhuang 提交于 
      iwmmxt is used in XScale, XScale3, Mohawk and PJ4 core. But the instructions
of accessing CP0 and CP1 is changed in PJ4. Append more files to support
iwmmxt in PJ4 core.
Signed-off-by: NZhou Zhu <zzhu3@marvell.com>
Signed-off-by: NHaojian Zhuang <haojian.zhuang@marvell.com>
Acked-by: NNicolas Pitre <nico@fluxnic.net>
Signed-off-by: NEric Miao <eric.y.miao@gmail.com>
      ef6c8445
  21. 15 12月, 2010 2 次提交
  23. 14 12月, 2010 1 次提交
  25. 09 12月, 2010 1 次提交
  27. 06 12月, 2010 1 次提交
  29. 05 12月, 2010 1 次提交
  31. 04 12月, 2010 1 次提交
  33. 30 11月, 2010 2 次提交
  35. 26 11月, 2010 1 次提交
  37. 23 11月, 2010 2 次提交
  39. 20 11月, 2010 1 次提交
    • R
      ARM: ftrace: enable function graph tracer · 0e341af8
      由 Rabin Vincent 提交于 
      Add the options to enable the function graph tracer on ARM.  Function
graph tracer support requires frame pointers, so exclude Thumb-2 and
also make sure FRAME_POINTER gets enabled when FUNCTION_GRAPH_TRACER is
used, since FUNCTION_TRACER doesn't "select FRAME_POINTER" when
ARM_UNWIND is used.  Therefore, with GCC 4.4.0+, you get plain function
tracing without frame pointers, but you'll need them if you want
function graph tracing.
Acked-by: NCatalin Marinas <catalin.marinas@arm.com>
Signed-off-by: NRabin Vincent <rabin@rab.in>
      0e341af8
  41. 16 11月, 2010 1 次提交
    • P
      ARM: mach-shmobile: Tidy up the Kconfig bits. · 6d72ad35
      由 Paul Mundt 提交于 
      Presently each one of the CPUs manually selects the same feature set, and
there's a reasonable expectation that none of these will change for
future CPUs in the SH-Mobile / R-Mobile family, so we move those over to
the top-level ARCH_SHMOBILE.

While we're at it, all of the CPUs support optional GPIOs via the PFC,
do not have I/O ports, and expect sparse IRQ, so we bring the
configuration in line across the board.

This more or less brings the ARM-based parts in sync with their SH
counterparts.
Signed-off-by: NPaul Mundt <lethal@linux-sh.org>
      6d72ad35
  43. 13 11月, 2010 1 次提交