Skip to content

R
raspberrypi-kernel

openeuler / raspberrypi-kernel

通知 13
Star 1
Fork 0
R
raspberrypi-kernel
切换分支/标签
  1. 15 7月, 2016 9 次提交
  3. 14 7月, 2016 5 次提交
  5. 13 7月, 2016 6 次提交
    • T
      sched/core: Correct off by one bug in load migration calculation · d60585c5
      由 Thomas Gleixner 提交于 
      The move of calc_load_migrate() from CPU_DEAD to CPU_DYING did not take into
account that the function is now called from a thread running on the outgoing
CPU. As a result a cpu unplug leakes a load of 1 into the global load
accounting mechanism.

Fix it by adjusting for the currently running thread which calls
calc_load_migrate().
Reported-by: NAnton Blanchard <anton@samba.org>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Acked-by: NPeter Zijlstra <peterz@infradead.org>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Michael Ellerman <mpe@ellerman.id.au>
Cc: Vaidyanathan Srinivasan <svaidy@linux.vnet.ibm.com>
Cc: rt@linutronix.de
Cc: shreyas@linux.vnet.ibm.com
Fixes: e9cd8fa4: ("sched/migration: Move calc_load_migrate() into CPU_DYING")
Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1607121744350.4083@nanosSigned-off-by: NIngo Molnar <mingo@kernel.org>
      d60585c5
    • L
      Merge tag 'media/v4.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media · cf875cc1
      由 Linus Torvalds 提交于 
      Pull media fixes from Mauro Carvalho Chehab:
 "Two regression fixes:

  - a regression when handling VIDIOC_CROPCAP at the media core;

  - a regression at adv7604 that was ignoring pad number in subdev ops"

* tag 'media/v4.7-2' of git://git.kernel.org/pub/scm/linux/kernel/git/mchehab/linux-media:
  [media] adv7604: Don't ignore pad number in subdev DV timings pad operations
  [media] v4l2-ioctl: fix stupid mistake in cropcap condition
      cf875cc1
    • T
      cpu/hotplug: Keep enough storage space if SMP=n to avoid array out of bounds scribble · a7c73414
      由 Thomas Gleixner 提交于 
      Xiaolong Ye reported lock debug warnings triggered by the following commit:

  8de4a0066106 ("perf/x86: Convert the core to the hotplug state machine")

The bug is the following: the cpuhp_bp_states[] array is cut short when
CONFIG_SMP=n, but the dynamically registered callbacks are stored nevertheless
and happily scribble outside of the array bounds...

We need to store them in case that the state is unregistered so we can invoke
the teardown function. That's independent of CONFIG_SMP. Make sure the array
is large enough.
Reported-by: Nkernel test robot <xiaolong.ye@intel.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Adam Borowski <kilobyte@angband.pl>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Anna-Maria Gleixner <anna-maria@linutronix.de>
Cc: Arnaldo Carvalho de Melo <acme@kernel.org>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Borislav Petkov <bp@suse.de>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Kan Liang <kan.liang@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Sebastian Andrzej Siewior <bigeasy@linutronix.de>
Cc: Stephane Eranian <eranian@google.com>
Cc: Vince Weaver <vincent.weaver@maine.edu>
Cc: lkp@01.org
Cc: stable@vger.kernel.org
Cc: tipbuild@zytor.com
Fixes: cff7d378 "cpu/hotplug: Convert to a state machine for the control processor"
Link: http://lkml.kernel.org/r/alpine.DEB.2.11.1607122144560.4083@nanosSigned-off-by: NIngo Molnar <mingo@kernel.org>
      a7c73414
    • L
      Merge tag 'acpi-urgent-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm · f1b5e4fa
      由 Linus Torvalds 提交于 
      Pull ACPI fixes from Rafael Wysocki:
 "One ACPI EC driver regression fix (code ordering) and three reverts of
  ACPICA commits, one that introduced a problem and two unsuccessful
  attempted fixes on top of it.

  Specifics:

   - Fix a recent regression in the ACPI EC driver introduced by a fix
     of another problem that uncovered a latent code ordering issue in
     the driver (Lv Zheng).

   - Revert a recent ACPICA commit that attempted to address a lock
     ordering issue introduced by a previous fix, but caused Dell
     Precision 5510 to fail to boot, revert that previous fix too and
     finally revert the commit that caused the original problem (a
     deadlock in the ACPICA code) to happen (Rafael Wysocki)"

* tag 'acpi-urgent-4.7' of git://git.kernel.org/pub/scm/linux/kernel/git/rafael/linux-pm:
  Revert "ACPI 2.0 / AML: Improve module level execution by moving the If/Else/While execution to per-table basis"
  Revert "ACPICA: Namespace: Fix deadlock triggered by MLC support in dynamic table loading"
  Revert "ACPICA: Namespace: Fix namespace/interpreter lock ordering"
  ACPI / EC: Fix code ordering issue in ec_remove_handlers()
      f1b5e4fa
    • R
      Merge branches 'acpica-fixes' and 'acpi-ec-fixes' · d0420d20
      由 Rafael J. Wysocki 提交于 
      * acpica-fixes:
  Revert "ACPI 2.0 / AML: Improve module level execution by moving the If/Else/While execution to per-table basis"
  Revert "ACPICA: Namespace: Fix deadlock triggered by MLC support in dynamic table loading"
  Revert "ACPICA: Namespace: Fix namespace/interpreter lock ordering"

* acpi-ec-fixes:
  ACPI / EC: Fix code ordering issue in ec_remove_handlers()
      d0420d20
    • L
      Merge tag 'qcom-smd-list-voltage' of... · 63bab220
      由 Linus Torvalds 提交于 
      Merge tag 'qcom-smd-list-voltage' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator

Pull regulator fix from Mark Brown:
 "Fix qcom-smd list voltage issues for msm8974

  This commit looks like a cleanup but in fact by causing the core to go
  down some simplified code paths for noop regulators it avoids a boot
  time crash for msm8974 platforms which was introduced in v4.7.  It has
  been in -next for a while, the issues in mainline for these platforms
  weren't flagged up to me until yesterday (I think it took some time to
  figure out what was going wrong)"

* tag 'qcom-smd-list-voltage' of git://git.kernel.org/pub/scm/linux/kernel/git/broonie/regulator:
  regulator: qcom_smd: Remove list_voltage callback for rpm_smps_ldo_ops_fixed
      63bab220
  7. 12 7月, 2016 2 次提交
  9. 11 7月, 2016 11 次提交
    • A
      posix_cpu_timer: Exit early when process has been reaped · 2c13ce8f
      由 Alexey Dobriyan 提交于 
      Variable "now" seems to be genuinely used unintialized
if branch

	if (CPUCLOCK_PERTHREAD(timer->it_clock)) {

is not taken and branch

	if (unlikely(sighand == NULL)) {

is taken. In this case the process has been reaped and the timer is marked as
disarmed anyway. So none of the postprocessing of the sample is
required. Return right away.
Signed-off-by: NAlexey Dobriyan <adobriyan@gmail.com>
Cc: stable@vger.kernel.org
Link: http://lkml.kernel.org/r/20160707223911.GA26483@p183.telecom.bySigned-off-by: NThomas Gleixner <tglx@linutronix.de>
      2c13ce8f
    • R
      Revert "ACPI 2.0 / AML: Improve module level execution by moving the... · 00c611de
      由 Rafael J. Wysocki 提交于 
      Revert "ACPI 2.0 / AML: Improve module level execution by moving the If/Else/While execution to per-table basis"

Revert commit 3d4b7ae9 (ACPI 2.0 / AML: Improve module level
execution by moving the If/Else/While execution to per-table basis)
that enabled the execution of module-level AML after loading each
table (rather than after all AML tables have been loaded), but
overlooked locking issues resulting from that change.

Fixes: 3d4b7ae9 (ACPI 2.0 / AML: Improve module level execution by moving the If/Else/While execution to per-table basis)
Reported-by: NMika Westerberg <mika.westerberg@linux.intel.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
      00c611de
    • R
      Revert "ACPICA: Namespace: Fix deadlock triggered by MLC support in dynamic table loading" · ffd8d618
      由 Rafael J. Wysocki 提交于 
      Revert commit 2f38b1b1 (ACPICA: Namespace: Fix deadlock triggered by
MLC support in dynamic table loading) that attempted to fix a deadlock
issue introduced by a previous commit, but it led to a lock ordering
inconsistency that caused further problems to appear.

Fixes: 2f38b1b1 (ACPICA: Namespace: Fix deadlock triggered by MLC support in dynamic table loading)
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
      ffd8d618
    • R
      Revert "ACPICA: Namespace: Fix namespace/interpreter lock ordering" · e8807e44
      由 Rafael J. Wysocki 提交于 
      Revert commit 45209046 (ACPICA: Namespace: Fix namespace/interpreter
lock ordering) that renders Dell Precision 5510 with the latest (1.2.10)
BIOS applied unable to boot.

Fixes: 45209046 (ACPICA: Namespace: Fix namespace/interpreter lock ordering)
Link: https://bugzilla.kernel.org/show_bug.cgi?id=121701Reported-by: NGreg White <gwhite@kupulau.com>
Signed-off-by: NRafael J. Wysocki <rafael.j.wysocki@intel.com>
      e8807e44
    • L
      Linux 4.7-rc7 · 92d21ac7
      由 Linus Torvalds 提交于
      92d21ac7
    • H
      tmpfs: fix regression hang in fallocate undo · 7f556567
      由 Hugh Dickins 提交于 
      The well-spotted fallocate undo fix is good in most cases, but not when
fallocate failed on the very first page.  index 0 then passes lend -1
to shmem_undo_range(), and that has two bad effects: (a) that it will
undo every fallocation throughout the file, unrestricted by the current
range; but more importantly (b) it can cause the undo to hang, because
lend -1 is treated as truncation, which makes it keep on retrying until
every page has gone, but those already fully instantiated will never go
away.  Big thank you to xfstests generic/269 which demonstrates this.

Fixes: b9b4bb26 ("tmpfs: don't undo fallocate past its last page")
Cc: stable@vger.kernel.org
Signed-off-by: NHugh Dickins <hughd@google.com>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>
      7f556567
    • L
      x86/quirks: Add early quirk to reset Apple AirPort card · abb2bafd
      由 Lukas Wunner 提交于 
      The EFI firmware on Macs contains a full-fledged network stack for
downloading OS X images from osrecovery.apple.com. Unfortunately
on Macs introduced 2011 and 2012, EFI brings up the Broadcom 4331
wireless card on every boot and leaves it enabled even after
ExitBootServices has been called. The card continues to assert its IRQ
line, causing spurious interrupts if the IRQ is shared. It also corrupts
memory by DMAing received packets, allowing for remote code execution
over the air. This only stops when a driver is loaded for the wireless
card, which may be never if the driver is not installed or blacklisted.

The issue seems to be constrained to the Broadcom 4331. Chris Milsted
has verified that the newer Broadcom 4360 built into the MacBookPro11,3
(2013/2014) does not exhibit this behaviour. The chances that Apple will
ever supply a firmware fix for the older machines appear to be zero.

The solution is to reset the card on boot by writing to a reset bit in
its mmio space. This must be done as an early quirk and not as a plain
vanilla PCI quirk to successfully combat memory corruption by DMAed
packets: Matthew Garrett found out in 2012 that the packets are written
to EfiBootServicesData memory (http://mjg59.dreamwidth.org/11235.html).
This type of memory is made available to the page allocator by
efi_free_boot_services(). Plain vanilla PCI quirks run much later, in
subsys initcall level. In-between a time window would be open for memory
corruption. Random crashes occurring in this time window and attributed
to DMAed packets have indeed been observed in the wild by Chris
Bainbridge.

When Matthew Garrett analyzed the memory corruption issue in 2012, he
sought to fix it with a grub quirk which transitions the card to D3hot:
http://git.savannah.gnu.org/cgit/grub.git/commit/?id=9d34bb85da56

This approach does not help users with other bootloaders and while it
may prevent DMAed packets, it does not cure the spurious interrupts
emanating from the card. Unfortunately the card's mmio space is
inaccessible in D3hot, so to reset it, we have to undo the effect of
Matthew's grub patch and transition the card back to D0.

Note that the quirk takes a few shortcuts to reduce the amount of code:
The size of BAR 0 and the location of the PM capability is identical
on all affected machines and therefore hardcoded. Only the address of
BAR 0 differs between models. Also, it is assumed that the BCMA core
currently mapped is the 802.11 core. The EFI driver seems to always take
care of this.

Michael Büsch, Bjorn Helgaas and Matt Fleming contributed feedback
towards finding the best solution to this problem.

The following should be a comprehensive list of affected models:
    iMac13,1        2012  21.5"       [Root Port 00:1c.3 = 8086:1e16]
    iMac13,2        2012  27"         [Root Port 00:1c.3 = 8086:1e16]
    Macmini5,1      2011  i5 2.3 GHz  [Root Port 00:1c.1 = 8086:1c12]
    Macmini5,2      2011  i5 2.5 GHz  [Root Port 00:1c.1 = 8086:1c12]
    Macmini5,3      2011  i7 2.0 GHz  [Root Port 00:1c.1 = 8086:1c12]
    Macmini6,1      2012  i5 2.5 GHz  [Root Port 00:1c.1 = 8086:1e12]
    Macmini6,2      2012  i7 2.3 GHz  [Root Port 00:1c.1 = 8086:1e12]
    MacBookPro8,1   2011  13"         [Root Port 00:1c.1 = 8086:1c12]
    MacBookPro8,2   2011  15"         [Root Port 00:1c.1 = 8086:1c12]
    MacBookPro8,3   2011  17"         [Root Port 00:1c.1 = 8086:1c12]
    MacBookPro9,1   2012  15"         [Root Port 00:1c.1 = 8086:1e12]
    MacBookPro9,2   2012  13"         [Root Port 00:1c.1 = 8086:1e12]
    MacBookPro10,1  2012  15"         [Root Port 00:1c.1 = 8086:1e12]
    MacBookPro10,2  2012  13"         [Root Port 00:1c.1 = 8086:1e12]

For posterity, spurious interrupts caused by the Broadcom 4331 wireless
card resulted in splats like this (stacktrace omitted):

    irq 17: nobody cared (try booting with the "irqpoll" option)
    handlers:
    [<ffffffff81374370>] pcie_isr
    [<ffffffffc0704550>] sdhci_irq [sdhci] threaded [<ffffffffc07013c0>] sdhci_thread_irq [sdhci]
    [<ffffffffc0a0b960>] azx_interrupt [snd_hda_codec]
    Disabling IRQ #17

Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=79301
Bugzilla: https://bugzilla.kernel.org/show_bug.cgi?id=111781
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=728916
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=895951#c16
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1009819
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1098621
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1149632#c5
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1279130
Bugzilla: https://bugzilla.redhat.com/show_bug.cgi?id=1332732
Tested-by: Konstantin Simanov <k.simanov@stlk.ru>        # [MacBookPro8,1]
Tested-by: Lukas Wunner <lukas@wunner.de>                # [MacBookPro9,1]
Tested-by: Bryan Paradis <bryan.paradis@gmail.com>       # [MacBookPro9,2]
Tested-by: Andrew Worsley <amworsley@gmail.com>          # [MacBookPro10,1]
Tested-by: Chris Bainbridge <chris.bainbridge@gmail.com> # [MacBookPro10,2]
Signed-off-by: NLukas Wunner <lukas@wunner.de>
Acked-by: NRafał Miłecki <zajec5@gmail.com>
Acked-by: NMatt Fleming <matt@codeblueprint.co.uk>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Chris Milsted <cmilsted@redhat.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Matthew Garrett <mjg59@srcf.ucam.org>
Cc: Michael Buesch <m@bues.ch>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: b43-dev@lists.infradead.org
Cc: linux-pci@vger.kernel.org
Cc: linux-wireless@vger.kernel.org
Cc: stable@vger.kernel.org
Cc: stable@vger.kernel.org # 123456789abc: x86/quirks: Apply nvidia_bugs quirk only on root bus
Cc: stable@vger.kernel.org # 123456789abc: x86/quirks: Reintroduce scanning of secondary buses
Link: http://lkml.kernel.org/r/48d0972ac82a53d460e5fce77a07b2560db95203.1465690253.git.lukas@wunner.de
[ Did minor readability edits. ]
Signed-off-by: NIngo Molnar <mingo@kernel.org>
      abb2bafd
    • L
      x86/quirks: Reintroduce scanning of secondary buses · 850c3210
      由 Lukas Wunner 提交于 
      We used to scan secondary buses until the following commit that
was applied in 2009:

  8659c406 ("x86: only scan the root bus in early PCI quirks")

which commit constrained early quirks to the root bus only. Its
motivation was to prevent application of the nvidia_bugs quirk
on secondary buses.

We're about to add a quirk to reset the Broadcom 4331 wireless card on
2011/2012 Macs, which is located on a secondary bus behind a PCIe root
port. To facilitate that, reintroduce scanning of secondary buses.

The commit message of 8659c406 notes that scanning only the root bus
"saves quite some unnecessary scanning work". The algorithm used prior
to 8659c406 was particularly time consuming because it scanned
buses 0 to 31 brute force. To avoid lengthening boot time, employ a
recursive strategy which only scans buses that are actually reachable
from the root bus.

Yinghai Lu pointed out that the secondary bus number read from a
bridge's config space may be invalid, in particular a value of 0 would
cause an infinite loop. The PCI core goes beyond that and recurses to a
child bus only if its bus number is greater than the parent bus number
(see pci_scan_bridge()). Since the root bus is numbered 0, this implies
that secondary buses may not be 0. Do the same on early scanning.

If this algorithm is found to significantly impact boot time or cause
infinite loops on broken hardware, it would be possible to limit its
recursion depth: The Broadcom 4331 quirk applies at depth 1, all others
at depth 0, so the bus need not be scanned deeper than that for now. An
alternative approach would be to revert to scanning only the root bus,
and apply the Broadcom 4331 quirk to the root ports 8086:1c12, 8086:1e12
and 8086:1e16. Apple always positioned the card behind either of these
three ports. The quirk would then check presence of the card in slot 0
below the root port and do its deed.
Signed-off-by: NLukas Wunner <lukas@wunner.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yinghai Lu <yinghai@kernel.org>
Cc: linux-pci@vger.kernel.org
Link: http://lkml.kernel.org/r/f0daa70dac1a9b2483abdb31887173eb6ab77bdf.1465690253.git.lukas@wunner.deSigned-off-by: NIngo Molnar <mingo@kernel.org>
      850c3210
    • L
      x86/quirks: Apply nvidia_bugs quirk only on root bus · 447d29d1
      由 Lukas Wunner 提交于 
      Since the following commit:

  8659c406 ("x86: only scan the root bus in early PCI quirks")

... early quirks are only applied to devices on the root bus.

The motivation was to prevent application of the nvidia_bugs quirk on
secondary buses.

We're about to reintroduce scanning of secondary buses for a quirk to
reset the Broadcom 4331 wireless card on 2011/2012 Macs. To prevent
regressions, open code the requirement to apply nvidia_bugs only on the
root bus.
Signed-off-by: NLukas Wunner <lukas@wunner.de>
Cc: Andy Lutomirski <luto@kernel.org>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Borislav Petkov <bp@alien8.de>
Cc: Brian Gerst <brgerst@gmail.com>
Cc: Denys Vlasenko <dvlasenk@redhat.com>
Cc: H. Peter Anvin <hpa@zytor.com>
Cc: Josh Poimboeuf <jpoimboe@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Cc: Yinghai Lu <yinghai@kernel.org>
Link: http://lkml.kernel.org/r/4d5477c1d76b2f0387a780f2142bbcdd9fee869b.1465690253.git.lukas@wunner.deSigned-off-by: NIngo Molnar <mingo@kernel.org>
      447d29d1
    • V
      perf/x86: Fix bogus kernel printk, again · eb019503
      由 Vegard Nossum 提交于 
      This showed up as "6Failed to access..." here.
Signed-off-by: NVegard Nossum <vegard.nossum@oracle.com>
Cc: Alexander Shishkin <alexander.shishkin@linux.intel.com>
Cc: Arnaldo Carvalho de Melo <acme@redhat.com>
Cc: Chen Yucong <slaoub@gmail.com>
Cc: Jiri Olsa <jolsa@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Peter Zijlstra <peterz@infradead.org>
Cc: Thomas Gleixner <tglx@linutronix.de>
Fixes: 1b74dde7 ("x86/cpu: Convert printk(KERN_<LEVEL> ...) to pr_<level>(...)")
Link: http://lkml.kernel.org/r/1468170841-17045-1-git-send-email-vegard.nossum@oracle.comSigned-off-by: NIngo Molnar <mingo@kernel.org>
      eb019503
    • L
      Merge branch 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus · 617a8d6b
      由 Linus Torvalds 提交于 
      Pull MIPS fix from Ralf Baechle:
 "Another week with just a single 4.7 fix.

  This fixes a possible 'loss' of the huge page bit from pmd on
  permission change"

* 'upstream' of git://git.linux-mips.org/pub/scm/ralf/upstream-linus:
  MIPS: Fix page table corruption on THP permission changes.
      617a8d6b
  11. 10 7月, 2016 1 次提交
  13. 09 7月, 2016 6 次提交