Followed commits add much codes. To make the work easy, this commit creates
own directory and move current file to it.
Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This commit renames 'firewire-speakers' to 'oxfw' to enhance support for
devices which based on OXFW970/971. A line for MODULE_ALIAS is added.

Additionally, to help for works in followed paches, some members
in private structure are renamed.
Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

In followed commits, dice driver is split into several files. For easily
managing these files, this commit adds subdirectory and move file into
the directory.
Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This commit adds a new driver for BeBoB based devices with no specific
operations. Currently this driver just create/remove card instance according
to callbacks.

BeBoB is 'BridgeCo enhanced Breakout Box'. This is installed to firewire
devices with DM1000/DM1100/DM1500 chipset. It gives common way for host
system to handle BeBoB based devices.

Current supported devices:
 - Edirol FA-66/FA-101
 - PreSonus FIREBOX/FIREPOD/FP10/Inspire1394
 - BridgeCo RDAudio1/Audio5
 - Mackie Onyx 1220/1620/1640 (Firewire I/O Card)
 - Mackie d.2 (Firewire Option)
 - Stanton FinalScratch 2 (ScratchAmp)
 - Tascam IF-FW DM
 - Behringer XENIX UFX 1204/1604
 - Behringer Digital Mixer X32 series (X-UF Card)
 - Apogee Rosetta 200/Rosetta 400 (X-FireWire card)
 - Apogee DA-16X/AD-16X/DD-16X (X-FireWire card)
 - Apogee Ensemble
 - ESI Quotafire610
 - AcousticReality eARMasterOne
 - CME MatrixKFW
 - Phonix Helix Board 12 MkII/18 MkII/24 MkII
 - Phonic Helix Board 12 Universal/18 Universal/24 Universal
 - Lynx Aurora 8/16 (LT-FW)
 - ICON FireXon
 - PrismSound Orpheus/ADA-8XR

Devices possible to be supported if identifying IDs:
 - Apogee Mini-Me Firewire/Mini-DAC Firewire
 - Behringer F-Control Audio 610/1616
 - Cakewalk Sonar Power Studio 66
 - CME UF400e
 - ESI Quotafire XL
 - Infrasonic DewX/Windy6
 - Mackie Digital X Bus x.200/400
 - Phonic Helix Board 12/18/24
 - Phonic FireFly 202/302
 - Rolf Spuler Firewire Guitar
Tested-by: NDavid Henningsson <david.henningsson@canonical.com>
Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

This commit adds a new driver for devices based on Fireworks. This driver
just creates/removes card instance according to callbacks.

Fireworks is a board module which Echo Audio produced. This module
consists of three chipsets:
 - Communication chipset for IEEE1394 PHY/Link and IEC 61883-1/6
 - DSP or/and FPGA for signal processing
 - Flash Memory to store firmwares

Current supported devices:
 - Mackie Onyx 400F/1200F
 - Echo AudioFire12/8(until 2009 July)
 - Echo AudioFire2/4/Pre8/8(since 2009 July)
 - Echo Fireworks 8/HDMI
 - Gibson Robot Interface pack/GoldTop
Signed-off-by: NTakashi Sakamoto <o-takashi@sakamocchi.jp>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

As a start point for further development, this is an incomplete driver
for DICE devices:
- only playback (so no clock source except the bus clock)
- only 44.1 kHz
- no MIDI
- recovery after bus reset is slow
- hwdep device is created, but not actually implemented

Contains compilation fixes by Stefan Richter.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

Add a MIDI driver for the Stanton FireWire DJ controllers.
Tested-by: NSean M. Pappalardo - D.J. Pegasus <spappalardo@mixxx.org>
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>

This adds an experimental driver for the front and rear microphones of
the Apple iSight web camera.
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>

Add a driver for two playback-only FireWire devices based on the OXFW970
chip.

v2: better AMDTP API abstraction; fix fw_unit leak; small fixes
v3: cache the iPCR value
v4: FireWave constraints; fix fw_device reference counting;
    fix PCR caching; small changes and fixes
v5: volume/mute support; fix crashing due to pcm stop races
v6: fix build; one-channel volume for LaCie
v7: use signed values to make volume (range checks) work; fix function
    block IDs for volume/mute; always use channel 0 for LaCie volume
Signed-off-by: NClemens Ladisch <clemens@ladisch.de>
Acked-by: NStefan Richter <stefanr@s5r6.in-berlin.de>
Tested-by: NJay Fenlason <fenlason@redhat.com>
Signed-off-by: NTakashi Iwai <tiwai@suse.de>