Add support for the x32 VDSO.  The x32 VDSO takes advantage of the
similarity between the x86-64 and the x32 ABIs to contain the same
content, only the container is different, as the x32 VDSO obviously is
an x32 shared object.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

At this point, one should be able to build an x32 kernel.

Note that for now we depend on CONFIG_IA32_EMULATION.  Long term, x32
and IA32 should be detangled.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

If CONFIG_X86_X32_ABI is defined, add the x32 system calls to the
system call tables.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Allow an x32 process to be started.
Originally-by: NH. J. Lu <hjl.tools@gmail.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>

x32 uses the 64-bit signal frame format, obviously, but there are some
structures which mixes that with pointers or sizeof(long) types, as
such we have to create a handful of system calls specific to x32.  By
and large these are a mixture of the 64-bit and the compat system
calls.
Originally-by: NH. J. Lu <hjl.tools@gmail.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Unfortunately a lot of the compat types are guarded with CONFIG_COMPAT
or the equivalent, so add a similar guard to <asm/sys_ia32.h> to avoid
compilation failures when CONFIG_COMPAT=n.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

x32 shares most system calls with x86-64, but unfortunately some
subsystem (the input subsystem is the chief offender) which require
is_compat() when operating with a 32-bit userspace.  The input system
actually has text files in sysfs whose meaning is dependent on
sizeof(long) in userspace!

We could solve this by having two completely disjoint system call
tables; requiring that each system call be duplicated.  This patch
takes a different approach: we add a flag to the system call number;
this flag doesn't affect the system call dispatch but requests compat
treatment from affected subsystems for the duration of the system call.

The change of cmpq to cmpl is safe since it immediately follows the
and.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Add rt_sigframe_x32 to <asm/sigframe.h>.  Unfortunately we can't just
define all the data structures unconditionally, due to the #ifdef
CONFIG_COMPAT in <linux/compat.h> and its trickle-down effects, hence
the #ifdef mess.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Add a definition for struct ucontext_x32; this is inherently a mix of
the 32- and 64-bit versions.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Export setup_sigcontext() and restore_sigcontext() from signal.c, so
we can use the 64-bit versions verbatim for x32.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

There are some definitions which are duplicated between
kernel/signal.c and ia32/ia32_signal.c; move them to a common header
file.

Rather than adding stuff to existing header files which contain data
structures, create a new header file; hence the slightly odd name
("all the good ones were taken.")

Note: nothing relied on signal_fault() being defined in
<asm/ptrace.h>.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Generate macros for the *kernel* code to use to refer to x32 system
calls.  These have an __NR_x32_ prefix and do not include
__X32_SYSCALL_BIT.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Generate <asm/unistd_x32.h>; this exports x32 system call numbers to
user space.

[ v2: Enclose all arguments to syshdr in '' so empty arguments aren't
      dropped on the floor. ]
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Split the 64-bit system calls into "64" (64-bit only) and "common"
(64-bit or x32) and add the x32 system call numbers.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

On x86, the only difference between sys_rt_sigprocmask and
sys32_rt_sigprocmask is the alignment of the data structures.
However, x86 allows data accesses with arbitrary alignment, and
therefore there is no reason for this code to be different.
Reported-by: NGregory M. Lueck <gregory.m.lueck@intel.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

An x32 process is *almost* the same thing as a 64-bit process with a
32-bit address limit, but there are a few minor differences -- in
particular core dumps are 32 bits and signal handling is different.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

So far this has only been used in process_64.c, but the x32 code will
need it in additional code.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

This is the same as the 64-bit posix_types.h, except that
__kernel_[u]long_t is defined to be [unsigned] long long and therefore
64 bits.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>

Use explicit sizes (__u64) instead of implicit sizes (unsigned long)
in the definition for sigcontext.h; this will allow this structure to
be shared between the x86-64 native ABI and the x32 ABI.
Originally-by: NH. J. Lu <hjl.tools@gmail.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Link: http://lkml.kernel.org/n/tip-4pr1xnnksprt7t0h3w5fw4rv@git.kernel.org

Factor out IA32 (compatibility instruction set) from 32-bit address
space in the thread_info flags; this is a precondition patch for x32
support.
Originally-by: NH. J. Lu <hjl.tools@gmail.com>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Link: http://lkml.kernel.org/n/tip-4pr1xnnksprt7t0h3w5fw4rv@git.kernel.org

Change the x86 architecture to use <asm-generic/posix_types.h>.
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Link: http://lkml.kernel.org/r/1328677745-20121-20-git-send-email-hpa@zytor.com
Cc: Ingo Molnar <mingo@elte.hu>
Cc: Thomas Gleixner <tglx@linutronix.de>

Return to behaviour perf MSR had before introducing vPMU in case vPMU
is disabled. Some guests access those registers unconditionally and do
not expect it to fail.
Signed-off-by: NGleb Natapov <gleb@redhat.com>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

On hosts without this patch, 32bit guests will crash (and 64bit guests
may behave in a wrong way) for example by simply executing following
nasm-demo-application:

    [bits 32]
    global _start
    SECTION .text
    _start: syscall

(I tested it with winxp and linux - both always crashed)

    Disassembly of section .text:

    00000000 <_start>:
       0:   0f 05                   syscall

The reason seems a missing "invalid opcode"-trap (int6) for the
syscall opcode "0f05", which is not available on Intel CPUs
within non-longmodes, as also on some AMD CPUs within legacy-mode.
(depending on CPU vendor, MSR_EFER and cpuid)

Because previous mentioned OSs may not engage corresponding
syscall target-registers (STAR, LSTAR, CSTAR), they remain
NULL and (non trapping) syscalls are leading to multiple
faults and finally crashs.

Depending on the architecture (AMD or Intel) pretended by
guests, various checks according to vendor's documentation
are implemented to overcome the current issue and behave
like the CPUs physical counterparts.

[mtosatti: cleanup/beautify code]
Signed-off-by: NStephan Baerwolf <stephan.baerwolf@tu-ilmenau.de>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

In order to be able to proceed checks on CPU-specific properties
within the emulator, function "get_cpuid" is introduced.
With "get_cpuid" it is possible to virtually call the guests
"cpuid"-opcode without changing the VM's context.

[mtosatti: cleanup/beautify code]
Signed-off-by: NStephan Baerwolf <stephan.baerwolf@tu-ilmenau.de>
Signed-off-by: NMarcelo Tosatti <mtosatti@redhat.com>

This commit removes the reboot quirk originally added by commit
e19e074b ("x86: Fix reboot problem on VersaLogic Menlow boards").

Testing with a VersaLogic Ocelot (VL-EPMs-21a rev 1.00 w/ BIOS
6.5.102) revealed the following regarding the reboot hang
problem:

- v2.6.37 reboot=bios was needed.

- v2.6.38-rc1: behavior changed, reboot=acpi is needed,
  reboot=kbd and reboot=bios results in system hang.

- v2.6.38: VersaLogic patch (e19e074b "x86: Fix reboot problem on
  VersaLogic Menlow boards") was applied prior to v2.6.38-rc7.  This
  patch sets a quirk for VersaLogic Menlow boards that forces the use
  of reboot=bios, which doesn't work anymore.

- v3.2: It seems that commit 660e34ce ("x86: Reorder reboot method
  preferences") changed the default reboot method to acpi prior to
  v3.0-rc1, which means the default behavior is appropriate for the
  Ocelot.  No VersaLogic quirk is required.

The Ocelot board used for testing can successfully reboot w/out
having to pass any reboot= arguments for all 3 current versions
of the BIOS.
Signed-off-by: NMichael D Labriola <michael.d.labriola@gmail.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Michael D Labriola <mlabriol@gdeb.com>
Cc: Kushal Koolwal <kushalkoolwal@gmail.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/87vcnub9hu.fsf@gmail.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

Skip DMI checks for vendor specific reboot quirks if the user
passed in a reboot= arg on the command line - we should never
override user choices.
Signed-off-by: NMichael D Labriola <michael.d.labriola@gmail.com>
Cc: Alan Cox <alan@lxorguk.ukuu.org.uk>
Cc: Michael D Labriola <mlabriol@gdeb.com>
Cc: Matthew Garrett <mjg@redhat.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/87wr8ab9od.fsf@gmail.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

Smatch complains that we have some inconsistent NULL checking.

If "task" were NULL then it would lead to a NULL dereference
later. We can remove this test because earlier on in the
function we have:

 if (!task)
	task = current;
Signed-off-by: NDan Carpenter <dan.carpenter@oracle.com>
Acked-by: NFrederic Weisbecker <fweisbec@gmail.com>
Cc: Namhyung Kim <namhyung@gmail.com>
Cc: Peter Zijlstra <a.p.zijlstra@chello.nl>
Cc: Clemens Ladisch <clemens@ladisch.de>
Link: http://lkml.kernel.org/r/20120128105246.GA25092@elgon.mountainSigned-off-by: NIngo Molnar <mingo@elte.hu>

rsyslog will display KERN_EMERG messages on a connected
terminal.  However, these messages are useless/undecipherable
for a general user.

For example, after a softlockup we get:

 Message from syslogd@intel-s3e37-04 at Jan 25 14:18:06 ...
 kernel:Stack:

 Message from syslogd@intel-s3e37-04 at Jan 25 14:18:06 ...
 kernel:Call Trace:

 Message from syslogd@intel-s3e37-04 at Jan 25 14:18:06 ...
 kernel:Code: ff ff a8 08 75 25 31 d2 48 8d 86 38 e0 ff ff 48 89
 d1 0f 01 c8 0f ae f0 48 8b 86 38 e0 ff ff a8 08 75 08 b1 01 4c 89 e0 0f 01 c9 <e8> ea 69 dd ff 4c 29 e8 48 89 c7 e8 0f bc da ff 49 89 c4 49 89

This happens because the printk levels for these messages are
incorrect. Only an informational message should be displayed on
a terminal.

I modified the printk levels for various messages in the kernel
and tested the output by using the drivers/misc/lkdtm.c kernel
modules (ie, softlockups, panics, hard lockups, etc.) and
confirmed that the console output was still the same and that
the output to the terminals was correct.

For example, in the case of a softlockup we now see the much
more informative:

 Message from syslogd@intel-s3e37-04 at Jan 25 10:18:06 ...
 BUG: soft lockup - CPU4 stuck for 60s!

instead of the above confusing messages.

AFAICT, the messages no longer have to be KERN_EMERG.  In the
most important case of a panic we set console_verbose().  As for
the other less severe cases the correct data is output to the
console and /var/log/messages.

Successfully tested by me using the drivers/misc/lkdtm.c module.
Signed-off-by: NPrarit Bhargava <prarit@redhat.com>
Cc: dzickus@redhat.com
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Cc: Andrew Morton <akpm@linux-foundation.org>
Link: http://lkml.kernel.org/r/1327586134-11926-1-git-send-email-prarit@redhat.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

Quite oddly, all of the arguments passed through from the top
level macros to the second level which didn't need parentheses
had them, while the only expression (involving a parameter)
needing them didn't.

Very recently I got bitten by the lack thereof when using
something like "array + index" for the first operand, with
"array" being an array more narrow than int.
Signed-off-by: NJan Beulich <jbeulich@suse.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Link: http://lkml.kernel.org/r/4F2183A9020000780006F3E6@nat28.tlf.novell.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

We've decided to provide CPU family specific container files
(starting with CPU family 15h). E.g. for family 15h we have to
load microcode_amd_fam15h.bin instead of microcode_amd.bin

Rationale is that starting with family 15h patch size is larger
than 2KB which was hard coded as maximum patch size in various
microcode loaders (not just Linux).

Container files which include patches larger than 2KB cause
different kinds of trouble with such old patch loaders. Thus we
have to ensure that the default container file provides only
patches with size less than 2KB.
Signed-off-by: NAndreas Herrmann <andreas.herrmann3@amd.com>
Cc: Borislav Petkov <borislav.petkov@amd.com>
Cc: <stable@kernel.org>
Link: http://lkml.kernel.org/r/20120120164412.GD24508@alberich.amd.com
[ documented the naming convention and tidied the code a bit. ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>

That is the last one missing for those CPUs.

Others were recently added with commits

 fb215366
 (KVM: expose latest Intel cpu new features (BMI1/BMI2/FMA/AVX2) to guest)

and

 commit 969df4b8
 (x86: Report cpb and eff_freq_ro flags correctly)
Signed-off-by: NAndreas Herrmann <andreas.herrmann3@amd.com>
Link: http://lkml.kernel.org/r/20120120163823.GC24508@alberich.amd.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

We allocate memory with malloc(), but neglect to free it before
the variable 'phdrs' goes out of scope --> leak.
Signed-off-by: NJesper Juhl <jj@chaosbits.net>
Link: http://lkml.kernel.org/r/alpine.LNX.2.00.1201232332590.8772@swampdragon.chaosbits.net
[ Mostly harmless. ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>

EDAC detection no longer crashes multi-node systems, so don't
conflict on it with NumaChip.
Signed-off-by: NDaniel J Blueman <daniel@numascale-asia.com>
Cc: Steffen Persvold <sp@numascale.com>
Link: http://lkml.kernel.org/r/1327473349-28395-1-git-send-email-daniel@numascale-asia.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

Initialize two spinlocks in tlb_uv.c and also properly define/initialize
the uv_irq_lock.

The lack of explicit initialization seems to be functionally
harmless, but it is diagnosed when these are turned on:

        CONFIG_DEBUG_SPINLOCK=y
        CONFIG_DEBUG_MUTEXES=y
        CONFIG_DEBUG_LOCK_ALLOC=y
        CONFIG_LOCKDEP=y
Signed-off-by: NCliff Wickman <cpw@sgi.com>
Cc: <stable@kernel.org>
Cc: Dimitri Sivanich <sivanich@sgi.com>
Link: http://lkml.kernel.org/r/E1RnXd1-0003wU-PM@eag09.americas.sgi.com
[ Added the uv_irq_lock initialization fix by Dimitri Sivanich ]
Signed-off-by: NIngo Molnar <mingo@elte.hu>

uv_gpa_to_soc_phys_ram() was inadvertently ignoring the
shift values.  This fix takes the shift into account.
Signed-off-by: NRuss Anderson <rja@sgi.com>
Cc: <stable@kernel.org>
Link: http://lkml.kernel.org/r/20120119020753.GA7228@sgi.comSigned-off-by: NIngo Molnar <mingo@elte.hu>

If NR_CPUS < 256 then arch_spinlock_t is only 16 bits wide but struct
xen_spinlock is 32 bits.  When a spin lock is contended and
xl->spinners is modified the two bytes immediately after the spin lock
would be corrupted.

This is a regression caused by 84eb950d
(x86, ticketlock: Clean up types and accessors) which reduced the size
of arch_spinlock_t.

Fix this by making xl->spinners a u8 if NR_CPUS < 256.  A
BUILD_BUG_ON() is also added to check the sizes of the two structures
are compatible.

In many cases this was not noticable as there would often be padding
bytes after the lock (e.g., if any of CONFIG_GENERIC_LOCKBREAK,
CONFIG_DEBUG_SPINLOCK, or CONFIG_DEBUG_LOCK_ALLOC were enabled).

The bnx2 driver is affected. In struct bnx2, phy_lock and
indirect_lock may have no padding after them.  Contention on phy_lock
would corrupt indirect_lock making it appear locked and the driver
would deadlock.
Signed-off-by: NDavid Vrabel <david.vrabel@citrix.com>
Signed-off-by: NJeremy Fitzhardinge <jeremy@goop.org>
Acked-by: NIan Campbell <ian.campbell@citrix.com>
CC: stable@kernel.org #only 3.2
Signed-off-by: NKonrad Rzeszutek Wilk <konrad.wilk@oracle.com>

In checkin

  303395ac x86: Generate system call tables and unistd_*.h from tables

the feature macros in <asm/unistd.h> were unified between 32 and 64
bits.  Unfortunately 32 bits requires __ARCH_WANT_SYS_IPC and this was
inadvertently dropped.
Reported-by: NDmitry Kasatkin <dmitry.kasatkin@intel.com>
Cc: Linus Torvalds <torvalds@linux-foundation.org>
Signed-off-by: NH. Peter Anvin <hpa@zytor.com>
Link: http://lkml.kernel.org/r/CALLzPKbeXN5gdngo8uYYU8mAow=XhrwBFBhKfG811f37BubQOg@mail.gmail.com

Randy Dunlap reports that we get

  arch/x86/um/shared/sysdep/ptrace.h:7:20: error: redefinition of 'regs_return_value'
  arch/x86/um/shared/sysdep/ptrace.h:7:20: note: previous definition of 'regs_return_value' was here

when compiling UML for x86-64.

Stephen Rothwell root-caused it and says:

 "Caused by commit d7e7528b ("Audit: push audit success and retcode
  into arch ptrace.h") (another patch that was never in linux-next :-().

  This file now needs protection against double inclusion."

so let's do as the man says.
Reported-by: NRandy Dunlap <rdunlap@xenotime.net>
Analyzed-by: NStephen Rothwell <sfr@canb.auug.org.au>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>

Several problems fixed in this patch :

1) Target of the conditional jump in case a divide by 0 is performed
   by a bpf is wrong.

2) Must 'generate' the full function prologue/epilogue at pass=0,
   or else we can stop too early in pass=1 if the proglen doesnt change.
   (if the increase of prologue/epilogue equals decrease of all
    instructions length because some jumps are converted to near jumps)

3) Change the wrong length detection at the end of code generation to
   issue a more explicit message, no need for a full stack trace.
Reported-by: NPhil Oester <kernel@linuxace.com>
Signed-off-by: NEric Dumazet <eric.dumazet@gmail.com>
Signed-off-by: NDavid S. Miller <davem@davemloft.net>

JONGMAN HEO reports:

  With current linus git (commit a25a2b84), I got following build error,

  arch/x86/kernel/vm86_32.c: In function 'do_sys_vm86':
  arch/x86/kernel/vm86_32.c:340: error: implicit declaration of function '__audit_syscall_exit'
  make[3]: *** [arch/x86/kernel/vm86_32.o] Error 1

OK, I can reproduce it (32bit allmodconfig with AUDIT=y, AUDITSYSCALL=n)

It's due to commit d7e7528b: "Audit: push audit success and retcode
into arch ptrace.h".
Reported-by: NJONGMAN HEO <jongman.heo@samsung.com>
Signed-off-by: NAl Viro <viro@zeniv.linux.org.uk>
Signed-off-by: NLinus Torvalds <torvalds@linux-foundation.org>