The DesignWare PCIe MSI hardware does not support MSI-X IRQs.  Setting
those up failed as a side effect of a bug which was fixed by 91f8ae82
("PCI: designware: Setup and clear exactly one MSI at a time").

Now that this bug is fixed, MSI-X IRQs need to be rejected explicitly;
otherwise devices trying to use them may end up with incorrectly working
interrupts.

Fixes: 91f8ae82 ("PCI: designware: Setup and clear exactly one MSI at a time")
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NJingoo Han <jg1.han@samsung.com>
CC: stable@vger.kernel.org	# v3.18+

Commit 0b0b0893 ("of/pci: Fix the conversion of IO ranges into IO
resources") changed how I/O resources are parsed from DT.  Rather than
containing the physical address of the I/O region, the addresses will now
be in I/O address space.

On Tegra the union of all ranges is used to expose a top-level memory-
mapped resource for the PCI host bridge.  This helps to make /proc/iomem
more readable.

Combining both of the above, the union would now include the I/O space
region.  This causes a regression on Tegra20, where the physical base
address of the PCIe controller (and therefore of the union) is located at
physical address 0x80000000.  Since I/O space starts at 0, the union will
now include all of system RAM which starts at 0x00000000.

This commit fixes this by keeping two copies of the I/O range: one that
represents the range in the CPU's physical address space, the other for the
range in the I/O address space.  This allows the translation setup within
the driver to reuse the physical addresses.  The code registering the I/O
region with the PCI core uses both ranges to establish the mapping.

Fixes: 0b0b0893 ("of/pci: Fix the conversion of IO ranges into IO resources")
Reported-by: NMarc Zyngier <marc.zyngier@arm.com>
Tested-by: NMarc Zyngier <marc.zyngier@arm.com>
Suggested-by: NArnd Bergmann <arnd@arndb.de>
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NArnd Bergmann <arnd@arndb.de>

The PCI/MSI irq chip callbacks mask/unmask_msi_irq have been renamed
to pci_msi_mask/unmask_irq to mark them PCI specific. Rename all usage
sites. The conversion helper functions are kept around to avoid
conflicts in next and will be removed after merging into mainline.

Coccinelle assisted conversion. No functional change.
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Russell King <linux@arm.linux.org.uk>
Cc: Ralf Baechle <ralf@linux-mips.org>
Cc: Benjamin Herrenschmidt <benh@kernel.crashing.org>
Cc: Heiko Carstens <heiko.carstens@de.ibm.com>
Cc: "David S. Miller" <davem@davemloft.net>
Cc: Chris Metcalf <cmetcalf@tilera.com>
Cc: x86@kernel.org
Cc: Jiang Liu <jiang.liu@linux.intel.com>
Cc: Jason Cooper <jason@lakedaemon.net>
Cc: Murali Karicheri <m-karicheri2@ti.com>
Cc: Thierry Reding <thierry.reding@gmail.com>
Cc: Mohit Kumar <mohit.kumar@st.com>
Cc: Simon Horman <horms@verge.net.au>
Cc: Michal Simek <michal.simek@xilinx.com>
Cc: Yijing Wang <wangyijing@huawei.com>

Rename write_msi_msg() to pci_write_msi_msg() to mark it as PCI
specific.
Signed-off-by: NJiang Liu <jiang.liu@linux.intel.com>
Cc: Bjorn Helgaas <bhelgaas@google.com>
Cc: Grant Likely <grant.likely@linaro.org>
Cc: Marc Zyngier <marc.zyngier@arm.com>
Cc: Yingjoe Chen <yingjoe.chen@mediatek.com>
Cc: Yijing Wang <wangyijing@huawei.com>
Signed-off-by: NThomas Gleixner <tglx@linutronix.de>

Save MSI controller in pci_sys_data instead of assigning MSI controller
pointer to every PCI bus in .add_bus().

[bhelgaas: use xilinx_pcie_msi_chip, not xilinx_pcie_msi_controller]
Signed-off-by: NYijing Wang <wangyijing@huawei.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Save MSI controller in pci_sys_data instead of assigning MSI controller
pointer to every PCI bus in .add_bus().
Signed-off-by: NYijing Wang <wangyijing@huawei.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Save MSI controller in pci_sys_data instead of assigning MSI controller
pointer to every PCI bus in .add_bus().

[bhelgaas: use struct rcar_msi.chip, not ctrl]
Signed-off-by: NYijing Wang <wangyijing@huawei.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Save MSI controller in pci_sys_data instead of assigning MSI controller
pointer to every PCI bus in .add_bus().

[bhelgaas: use dw_pcie_msi_chip, not dw_pcie_msi_controller]
Signed-off-by: NYijing Wang <wangyijing@huawei.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Save MSI controller in pci_sys_data instead of assigning MSI controller
pointer to every PCI bus in .add_bus().

[bhelgaas: use struct tegra_msi.chip, not ctrl]
Signed-off-by: NYijing Wang <wangyijing@huawei.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Add a standard help text to the Kconfig entry for the Tegra PCIe host
controller driver.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

32-bit and 64-bit ARM use very different infrastructure to register a PCI
host bridge.  The Tegra PCIe host controller driver currently only supports
the 32-bit ARM infrastructure, so prevent it from being built on 64-bit ARM
where it will break.
Signed-off-by: NThierry Reding <treding@nvidia.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

The site-specific OOM messages are unnecessary, because they duplicate the
MM subsystem generic OOM message.  This patch fixes the following
checkpatch warning:

  WARNING: Possible unnecessary 'out of memory' message
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>

This patch fixes the following checkpatch warning:

  WARNING: Missing a blank line after declarations

[bhelgaas: drop mvebu_pcie_add_bus() change because it's going away anyway]
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NJason Cooper <jason@lakedaemon.net>

This patch fixes the following checkpatch warning:

  WARNING: Missing a blank line after declarations
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

This patch fixes the following checkpatch warning:

  WARNING: void function return statements are not generally useful
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

This patch fixes the following checkpatch error:

  ERROR: code indent should use tabs where possible
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

The site-specific OOM messages are unnecessary because they duplicate the
MM subsystem generic OOM message.  This patch fixes the following
checkpatch warning:

  WARNING: Possible unnecessary 'out of memory' message
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

The X-Gene PCIe driver assumes pci_scan_root_bus() assigns resources as
proposed in [1].  But we dropped patch [1] because it would break some
architectures, which means the X-Gene PCIe driver is currently broken.

Add calls to scan the bus, assign resources, and add devices in the X-Gene
driver to fix this.

[bhelgaas: changelog]
[1] http://lkml.kernel.org/r/1412000971-9242-11-git-send-email-Liviu.Dudau@arm.comSigned-off-by: NDuc Dang <dhdang@apm.com>
Signed-off-by: NTanmay Inamdar <tinamdar@apm.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Add __init annotation to dra7xx_add_pcie_port(), because
dra7xx_add_pcie_port() is called only by dra7xx_pcie_probe() which is
marked __init.  This patch fixes a section mismatch warning:

WARNING: drivers/pci/host/built-in.o(.text.unlikely+0xcc): Section mismatch in reference from the function dra7xx_add_pcie_port() to the function .init.text:dw_pcie_host_init()
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

Add __init annotation to spear13xx_add_pcie_port(), because
spear13xx_add_pcie_port() is called only by spear13xx_pcie_probe(), which
is marked __init.  This fixes a section mismatch warning:

WARNING: drivers/pci/host/built-in.o(.text.unlikely+0x94): Section mismatch in reference from the function spear13xx_add_pcie_port() to the function .init.text:dw_pcie_host_init()
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>

The add_pcie_port() and pcie_init() functions are SPEAr13xx-specific.  Add
spear13xx prefix to avoid collision in global name space.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NViresh Kumar <viresh.kumar@linaro.org>

The add_pcie_port() function is dra7xx-specific.  Add dra7xx prefix to
avoid collision in global name space.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NKishon Vijay Abraham I <kishon@ti.com>

Add support for Freescale Layerscape PCIe controller.  This driver re-uses
the Synopsis DesignWare core code.

[bhelgaas: add Kconfig dependency on CONFIG_ARM]
Signed-off-by: NMinghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NArnd Bergmann <arnd@arndb.de>

"msi_chip" isn't very descriptive, so rename it to "msi_controller".  That
tells a little more about what it does and is already used in device tree
bindings.

No functional change.

[bhelgaas: changelog, change *only* the struct name so it's reviewable]
Suggested-by: NBjorn Helgaas <bhelgaas@google.com>
Signed-off-by: NYijing Wang <wangyijing@huawei.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

In order to consolidate DT configuration for PCI host controllers in the
kernel, a new API, of_pci_get_host_bridge_resources(), was developed to
allow parsing and assigning IO/BUS/MEM resources from DT, removing
duplicated code present in the majority of PCI host driver implementations.

Convert the existing PCI generic host controller driver to the new API.
Most of the code parsing ranges and creating resources is now delegated to
the of_pci_get_host_bridge_resources() API.

The PCI host controller code filters the resulting resource list and maps
IO space by using the newly introduced pci_ioremap_iospace() API.

New code supports only one IO resource per generic host controller, which
should cater for all existing host controller configurations.

[bhelgaas: changelog]
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NWill Deacon <will.deacon@arm.com>

The number of config space windows allocated for the host bridge depends on
how many bus numbers are below the bridge.  Instead of first allocating the
windows and then limiting the bus resource, this patch reshuffles the code
so that if any limitation is applied to the bus resource, it is taken into
account in the windows allocation.

[bhelgaas: changelog]
Signed-off-by: NLorenzo Pieralisi <lorenzo.pieralisi@arm.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NWill Deacon <will.deacon@arm.com>

For boards without a reset GPIO we skip the delay between enabling the
pcie_ref_clk and touching the RC registers for configuration.  This hangs
the system if there isn't a proper delay to ensure the clocks are settled
in the DW PCIe core.

Also iMX6Q always needs an additional 10us delay to make sure the reset is
propagated through the core, as we don't have an explicitly controlled
reset input on this SoC.

This fixes a problem with 3fce0e88 ("PCI: imx6: Delay enabling
reference clock for SS until it stabilizes"): the kernel doesn't boot on
systems that don't pass the PCI GPIO reset in the DTB.  This regression
affects mx6 nitrogen boards.

[bhelgaas: add regression info in changelog]
Fixes: 3fce0e88 ("PCI: imx6: Delay enabling reference clock for SS until it stabilizes")
Reported-by: NFabio Estevam <fabio.estevam@freescale.com>
Tested-by: NFabio Estevam <fabio.estevam@freescale.com>
Signed-off-by: NRichard Zhu <richard.zhu@freescale.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NLucas Stach <l.stach@pengutronix.de>

Make rcar_pci static because it is used only in this file.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NSimon Horman <horms+renesas@verge.net.au>

Make ks_dw_pcie_msi_domain_ops static because it is used only in this file.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NMurali Karicheri <m-karicheri2@ti.com>
Acked-by: Santosh Shilimkar<ssantosh@kernel.org>

The add_pcie_port() and pcie_init() functions are Exynos-specific.  Add
exynos prefix to avoid collision in global name space.
Signed-off-by: NJingoo Han <jg1.han@samsung.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

A platform_driver does not need to set an owner, it will be populated by the
driver core.
Signed-off-by: NWolfram Sang <wsa@the-dreams.de>

Add the AppliedMicro X-Gene SOC PCIe host controller driver.  The X-Gene
PCIe controller supports up to 8 lanes and GEN3 speed.  The X-Gene SOC
supports up to 5 PCIe ports.

[bhelgaas: folded in MAINTAINERS and bindings updates]
Tested-by: NMing Lei <ming.lei@canonical.com>
Tested-by: NDann Frazier <dann.frazier@canonical.com>
Signed-off-by: NTanmay Inamdar <tinamdar@apm.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: Liviu Dudau <Liviu.Dudau@arm.com> (driver)

Replace them by using the standard kernel bitmap ops.  No functional
change, but makes the code a lot cleaner.
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NPratyush Anand <pratyush.anand@st.com>
Acked-by: NJingoo Han <jg1.han@samsung.com>

"msi_attrib.pos" is only used for MSI (not MSI-X), and we already cache the
MSI capability offset in "dev->msi_cap".

Remove "pos" from the struct msi_attrib and use "dev->msi_cap" directly.

[bhelgaas: changelog, fix whitespace]
Signed-off-by: NYijing Wang <wangyijing@huawei.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>

The ranges property for a host bridge controller in DT describes the
mapping between the PCI bus address and the CPU physical address.  The
resources framework however expects that the IO resources start at a pseudo
"port" address 0 (zero) and have a maximum size of IO_SPACE_LIMIT.  The
conversion from PCI ranges to resources failed to take that into account,
returning a CPU physical address instead of a port number.

Also fix all the drivers that depend on the old behaviour by fetching the
CPU physical address based on the port number where it is being needed.
Signed-off-by: NLiviu Dudau <Liviu.Dudau@arm.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NLinus Walleij <linus.walleij@linaro.org>
CC: Grant Likely <grant.likely@linaro.org>
CC: Rob Herring <robh+dt@kernel.org>
CC: Arnd Bergmann <arnd@arndb.de>
CC: Thierry Reding <thierry.reding@gmail.com>
CC: Simon Horman <horms@verge.net.au>
CC: Catalin Marinas <catalin.marinas@arm.com>

The setup_irq function is supposed to set up exactly one MSI IRQ.  Multiple
IRQ setup is handled differently, to respect the choices made by the upper
layers.

Also only clear one MSI IRQ at a time; the PCI core will call into this
function multiple times if it has to tear down more than one MSI IRQ.
Signed-off-by: NLucas Stach <l.stach@pengutronix.de>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Reviewed-by: NPratyush Anand <pratyush.anand@st.com>
Acked-by: NJingoo Han <jg1.han@samsung.com>

Add a struct pcie_host_ops .get_msi_data() method for platforms to return
their special MSI message data.
Signed-off-by: NMinghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NMohit KUMAR <mohit.kumar@st.com>

The struct pcie_host_ops .get_msi_data() method returns the MSI message
address.  To accurately express its purpose, rename it to .get_msi_addr().
Signed-off-by: NMinghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NMohit KUMAR <mohit.kumar@st.com>

End address should be equal to start_addr + size - 1.  Fix PCI IO resource
end address calculation.
Signed-off-by: NMinghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NMohit KUMAR <mohit.kumar@st.com>

The code has calculated cfg0_base and cfg1_base when parsing 'reg' or
'ranges' property of PCI DTS node, so remove duplicate calculation.  When
using 'reg', resource cfg is not used, so this code computed an incorrect
configuration base.
Signed-off-by: NMinghuan Lian <Minghuan.Lian@freescale.com>
Signed-off-by: NBjorn Helgaas <bhelgaas@google.com>
Acked-by: NMohit KUMAR <mohit.kumar@st.com>